Before start i want to say sorry if something like this is already written.
Now, i was on FW I9000XXJPM today i wanted to upgrade to I9000XXJPX. i did flash with odin all pass, but when phone resets i get note
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed
I also want to keep my contacts and other files, so what i should do to fix it wihtout losing data???
sry again for new theread, but i really need to fix it
Related
This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.
forcedv said:
This SGS had the original O2 ADJM1 firmware without the 3 button combo, which I fixed using the 3 button fix from another thread. SGS was working fine but I thought I'd give in and try a custom Rom.
Installed Darky's 6.0, worked great, but when I tried a factory reset from the settings menu, it kind of semi bricked, so I used Odin to install "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM" with pit 512 to recover the SGS.
Problem is, Android Market will not download "download unsuccessful" pops up all the time.
The I installed GT-I9000_I9000XWJM9, hoping to fix the problem, while keeping recovery 2e, but Android market still does not download.
When I try the "wipe data/factory" reset using the 3 button combo, I get the following errors:
Appling Multi-csc
installing Muli-csc
mps_dat value: KOR
copy_multi_carrier from : KOR
multicsc : can not access to /system/csc/KOR/system/
copy common_data E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
wiping data...
Formatting DATA:...
format_root_device: /dev/block/mmcblk0p2Formatting CACHE:...
format_root_device: /dev/block/stl11Data wipe complete.
E:Can't mount /dev/block/stl11 (invalid argument)
E:Can't mount /dev/block/stl11 (invalid argument)
I'm guessing "E" is the internal SD card, so maybe there's a problem there
Also how do I fix this android market problem ?
I really need a pointer to installing a stock fully working Rom with recovery 2e, then I can move back to Darky's new 7.0 ROM.
Any help would be great.
Click to expand...
Click to collapse
Hi, i have exactly the same problem.
With the invalid argument problems on data/factory reset, and the download unsucessfull problem! i have reflashed 4times JM1 on my phone !!!
i give 25$ for someone who solve the problem !
The way I fixed this problem was in two steps.
I used the Kies registry hack (someone here has created a program (which I can't find a link to right now) for windows that fools Kies to recognize your SGS as requiring an official firmware update).
Once your SGS is back on your official carrier firmware, Android market will work again.
From there, I was able to do a proper factory reset, followed by installing Draky's 7 Rom, using the 3 button combo and update zip method......and till now it's all good.
My SGS went from being a useless paper weight, to a kick ass device.
Good luck.
*You mentioned JM1* you may not need to go back to that firmware, but whatever official carrier firmware that Kies updates your SGS to, should fix the market problem.
With the Internal SD Corrupted Fix, i have formated my internal SD and there is no invalid argument when i do a data/factory reset.
but i think this is another problem, i have tried anything.
The hang on installing/unistalling problem come when i add my Google Account on the Android Market.
After this, i can't install or unistall anything.. that show installing.... at the infinite.
(sry for my english)
i have created a new google account for re-downloading again applications on the market, but i'm really sad because i have bought a lot of with my other account! wtf...
can't someone have any ideas or can help me?
thanks!
Update Media. please wait
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't Mount SDCARD
Your storage not prepared yet. Plase use UI menu for format a and reboot actions
Copy default media content failed.
After update endless reboot at samsung logo.
Stuck with odin get FAIL message trying to flash hidden.rfs
Any solutions ?
Bump any offers ?:S
Are all these posts for the same tab? What the heck did you do to it?
nope. the other tab sent to warranty. this is a new tab. and still no fix
After flashing my i9000 and installing a rom i have a problem my phone block in the animation of samsung and when i clik in vol+ / home / alim i found this error
E:failed to mount /sdcard (files exists),
E:copy_dbdata_media:Can't mount /sdcard.
E:Can't mount /dev/block/stl10 (invalid Argument)
Please help it's so urgent :/
if you are not able to get into recovery... you might have to get into download mode, install a ODIN flashable Kernel and then trying re-flashing the ROM...
you can find the steps for ODIN in this link...
http://www.semaphore.gr/how-to/flash-semaphore-kernel
make sure you have the required drivers installed on your PC...
this link also has a lot of information 'http://forum.xda-developers.com/showthread.php?t=1494493'...
http://forum.xda-developers.com/showthread.php?t=984140
ok now that i sucesfully reparttioned my shw-m180s,
i have a tiny bit of problem on the internal sd card...
its not showing the 16gb storage,instead its 210mb size..
.i have now sucesfully collected all the files i need to flash and keep on reflashing,
but i cant find a way to successfully make the internal sd to gb
,instead it keeps goin back to the 210mb,
before i have the no internal sd card detected or error,
but it shows upfor a sec then gone,now its just 210mb,
anyone else who have this problem that successfully corrected the repartition process kindly guide me to make it to gb instead of just mb...
for those interested heres the file url links for you to use
stock SHW-M180S Files:
http://gadgetmodder.com/2012/11/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
Ice Cream Sandwich rom:
http://gadgetmodder.com/2012/11/gui...m180s-korean-anycall-tablet-to-android-4-0-4/
Theres another thread here on forums for the Jelly Bean system but i wouldnt suggest it coz i cant access the recovery mode but ill add the link too
Jelly Bean Rom Thread Link:
http://forum.xda-developers.com/showthread.php?t=2057050
this threads and files are not mine,i just looked hard to get these from all the sites i came across,thanks to them i can use my tab even with 210mb (^^,)
after many months of being stuck,
i have now successfully restored my internal to stock with some threads and files ive collected,
all came clear after 2 days ago,why? coz I was always partying and drinking lol
ok the trick is
1. enter download mode to flash m180s_4.1.2_CN_130109 tarball via odin 1.85
2. it be a constant loop in recovery choose advance option reparation sd card to settings u want
3. mount sd card to pc to check desired internal
4. clear all data cache dalvik etc if u can
5.enter download again to flash the rom that worked before,as for me im stuck with Jiwon ROM 2.0S Full
I cant retun to stock froyo,gb and rooted ics. the error still shows when im using those roms
now its what im working on,hope to fix it as soon as possible
and they say it cant be fixed lol, go prove them wrong (^_^)
heres a site with the files I used,credit goes to all to ones that shared it
http://main.develoid.com:81/samsung/Galaxy/Galaxy Tab/SHW-M180S/
site is moved
hi this site is moved to mobile-hub.net
here is the new links
4.0.4 ugrade is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
root guide is here http://mobile-hub.com/guide-how-to-root-samsung-shw-m180s-korean-anycall-tablet/
back to stock is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
After Flash it shows E:failed to mount
After i flash my Samsung Galaxy Tab SHW M180S(B) with \HOME_M180S.UC27.2041_CL1058960_REV03_user_low_ship.tar.md5
and it seccessfully pass in Odin.but after reset it shows a error message like
E:Failed to mount /Cache (Invalid Argument) what should i do now......
E:failed to mount /data (Invalid argument)
E:failed to mount /cache (Invalid argument)
E:Can’t mount /cache/recovery/command
Checksum confirmation -> check(0)
Not need checksum confirmation
Already executed!!...
# MANUAL MODE #
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernal_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
stock rom i have same result, only way to fix that is by jtag, the solution i found was to bring back the internal
Hi all
I had lineageOS 20 on my device et since I tried to update magisk and the ROM, my phone autodeleted many apps, with no possibility to reinstall them (like if I had no space left... but i had space)
didn't find why so I decided to wipe data and reinstall everything but ... same thing. so tried to erase by myself android content folder in storage folder (not /) ,
since I did this, nothing works at all, my phone don't boot anymore, I cant install a rom
failed to mount '/data' (invalid argument)
/system/bin/fsck.f2fs /dev/block/sda34 process ended with ERROR : 255
Unable to repair Data
I don't know what to do ... help me please !