Update Media. please wait
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't Mount SDCARD
Your storage not prepared yet. Plase use UI menu for format a and reboot actions
Copy default media content failed.
After update endless reboot at samsung logo.
Stuck with odin get FAIL message trying to flash hidden.rfs
Any solutions ?
Bump any offers ?:S
Are all these posts for the same tab? What the heck did you do to it?
nope. the other tab sent to warranty. this is a new tab. and still no fix
Related
Before start i want to say sorry if something like this is already written.
Now, i was on FW I9000XXJPM today i wanted to upgrade to I9000XXJPX. i did flash with odin all pass, but when phone resets i get note
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed
I also want to keep my contacts and other files, so what i should do to fix it wihtout losing data???
sry again for new theread, but i really need to fix it
Hi All,
I have the same problem described in the old thread @ http://forum.xda-developers.com/showthread.php?t=807784
The thing is, The problem just "appeared", havn't flashed lately, out of the blue, the devices hung and from then on, have not been able to access. I was running DARKY 9.5 with his new kernel.
error started of being:
Code:
update media. please wait
E: can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared ye. Pleas use UI menu for format and reboot actions.
copy deault media content failed.
after flashing JPM8:
Code:
can't mount /dev/block/mmcblk0p1
(no such file or directory)
E: copy default media: can't mount SDCARD:
copy default media failed.
E: Can't mount /dev/block/stl11
(Invalid argument)
flashing JPM bring me back to square one. can't repartition (or push or anything using ADB). Tried everything google has to offer, but no luck...
my SGS has been acting very bricklike for 4 days...
Need help (and lots of it)
Thanks
What hardware?
Sent from my GT-I9000M using XDA Premium App
This should help you http://forum.xda-developers.com/showthread.php?t=845708
@jim SGS I9000 8GB international
@zhuk7 I'm not able get that far, somehow lost my root, can't push parted, can't locate fdisk
bump......
Try flashing something else. An eclair rom would be a good place to start. Pit files with no repartition.
and I was under the impression JM8 is eclair...
I had similar problem and the solution was to flash a 3 file rom in odin(csc, pda, modem) with repartition.
which (exact) ROM?
so far i'm failing miserably with all roms, including some quite old ecairs - JFF & JFD
now tried almost all the 2.1-2.2 EU stock ROMS and no luck...
should I send to manufacturer?
SO FAR:
a)flash JM8 with 512 repartition,
b)flash JPM with no repartition
c)flash speedmod 500
now have an active android GUI, claiming the internal sdcard is "damaged"
from here, I have tried numerous fixes, with no luck yet...
Just to summarize:
I send to samsung (and is was a hassle... overseas) and they fixed it under warrenty...
Hi everybody
I was on the newest DarkyRom version on my SGS GT-I9000.
But last week I got the SGSII. So i wanted to flash the SGS back to stock to sell it.
A tutorial told me to flash JPU first and then update later to newer versions.
I did this and the phone was back to the original firmware (everything worked fine).
But when I tried to boot it this morning it got stuck in a bootloop.
So I tried to flash JPU again. But this didn't help.
I got error messages on first startup like:
Code:
update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage is not prepared yet. please use UI menu for format and reboot actions.
copy default media content failed
Since then I have tried to flash many other firmwares. Stuff between 2.1 and 2.3.6.
But nothing helped. The same error on first startup after flash and then bootloop.
Someone told me to flash CWM via ODIN an see if the SDCard was mounted.
Turned out it's not. When I try mounting the SDCard in the CWM recovery mode I get the following:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(I/O error)
Error mounting SDCARD:!
Is there any way to get the phone back to life or is the internal SD card just broken and do I have to send the phone in?
Greets
no one got an idea?
I guess not... :S
I have the exact same problem. But I didn't even tinker with my phone. I started crashing daily and now it doesn't even boot anymore.
After flashing my i9000 and installing a rom i have a problem my phone block in the animation of samsung and when i clik in vol+ / home / alim i found this error
E:failed to mount /sdcard (files exists),
E:copy_dbdata_media:Can't mount /sdcard.
E:Can't mount /dev/block/stl10 (invalid Argument)
Please help it's so urgent :/
if you are not able to get into recovery... you might have to get into download mode, install a ODIN flashable Kernel and then trying re-flashing the ROM...
you can find the steps for ODIN in this link...
http://www.semaphore.gr/how-to/flash-semaphore-kernel
make sure you have the required drivers installed on your PC...
this link also has a lot of information 'http://forum.xda-developers.com/showthread.php?t=1494493'...
http://forum.xda-developers.com/showthread.php?t=984140
ok now that i sucesfully reparttioned my shw-m180s,
i have a tiny bit of problem on the internal sd card...
its not showing the 16gb storage,instead its 210mb size..
.i have now sucesfully collected all the files i need to flash and keep on reflashing,
but i cant find a way to successfully make the internal sd to gb
,instead it keeps goin back to the 210mb,
before i have the no internal sd card detected or error,
but it shows upfor a sec then gone,now its just 210mb,
anyone else who have this problem that successfully corrected the repartition process kindly guide me to make it to gb instead of just mb...
for those interested heres the file url links for you to use
stock SHW-M180S Files:
http://gadgetmodder.com/2012/11/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
Ice Cream Sandwich rom:
http://gadgetmodder.com/2012/11/gui...m180s-korean-anycall-tablet-to-android-4-0-4/
Theres another thread here on forums for the Jelly Bean system but i wouldnt suggest it coz i cant access the recovery mode but ill add the link too
Jelly Bean Rom Thread Link:
http://forum.xda-developers.com/showthread.php?t=2057050
this threads and files are not mine,i just looked hard to get these from all the sites i came across,thanks to them i can use my tab even with 210mb (^^,)
after many months of being stuck,
i have now successfully restored my internal to stock with some threads and files ive collected,
all came clear after 2 days ago,why? coz I was always partying and drinking lol
ok the trick is
1. enter download mode to flash m180s_4.1.2_CN_130109 tarball via odin 1.85
2. it be a constant loop in recovery choose advance option reparation sd card to settings u want
3. mount sd card to pc to check desired internal
4. clear all data cache dalvik etc if u can
5.enter download again to flash the rom that worked before,as for me im stuck with Jiwon ROM 2.0S Full
I cant retun to stock froyo,gb and rooted ics. the error still shows when im using those roms
now its what im working on,hope to fix it as soon as possible
and they say it cant be fixed lol, go prove them wrong (^_^)
heres a site with the files I used,credit goes to all to ones that shared it
http://main.develoid.com:81/samsung/Galaxy/Galaxy Tab/SHW-M180S/
site is moved
hi this site is moved to mobile-hub.net
here is the new links
4.0.4 ugrade is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
root guide is here http://mobile-hub.com/guide-how-to-root-samsung-shw-m180s-korean-anycall-tablet/
back to stock is here http://mobile-hub.com/how-to-flash-samsung-shw-m180s-korean-anycall-tablet/
After Flash it shows E:failed to mount
After i flash my Samsung Galaxy Tab SHW M180S(B) with \HOME_M180S.UC27.2041_CL1058960_REV03_user_low_ship.tar.md5
and it seccessfully pass in Odin.but after reset it shows a error message like
E:Failed to mount /Cache (Invalid Argument) what should i do now......
E:failed to mount /data (Invalid argument)
E:failed to mount /cache (Invalid argument)
E:Can’t mount /cache/recovery/command
Checksum confirmation -> check(0)
Not need checksum confirmation
Already executed!!...
# MANUAL MODE #
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernal_kernel_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/reovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
stock rom i have same result, only way to fix that is by jtag, the solution i found was to bring back the internal