Im not sure why this is doing this. I upgraded my fathers phone, rooted it, and placed liquid rom on the phone.
If i assign a shortcut to call a contact for instance, i click on the contact and it takes close to 4 to 5 seconds for it to goto the dial screen?
Also, doesnt the hero come with a sensor for turning off the screen while on a phone call?
If i remove my phone from listening by my ear, the screen stays black until i hit the end button?
My dad swears it wasnt this way before lol
The Hero does not have a sensor to end a call on it's own, just the Eris.
sfld said:
Im not sure why this is doing this. I upgraded my fathers phone, rooted it, and placed liquid rom on the phone.
If i assign a shortcut to call a contact for instance, i click on the contact and it takes close to 4 to 5 seconds for it to goto the dial screen?
Also, doesnt the hero come with a sensor for turning off the screen while on a phone call?
If i remove my phone from listening by my ear, the screen stays black until i hit the end button?
My dad swears it wasnt this way before lol
Click to expand...
Click to collapse
The Hero does have a setting to turn the screen off during a call, some ROMS also have a setting where you can choose what the power button does during a call. Mine, for instance, is set to end the call when I press power, and wake the screen when I press menu. Just play around with the settings in the ROM's settings, sometimes they are not default.
What radio are you using?
Im not sure, i will have to check.
I figured the ota i did updated the radio, im a EVO guy myself
but what i will do is grab a new radio and flash it
you guys know what the latest version is?
Related
Strange one this but I am left handed (eared) and after making a call I always find that my ear has opened lots of programs whilst talking. Is there a way to lock the display while taking a call or some other solution?
Also after uninstalling PocketInformant I now find my Calender softkey key is unmapped. I have seen references that I just need to remap it using "Advance Config" but I can't find that either.
Can someone help a halfwit..!
Thanks, Steve.
shapcott said:
Strange one this but I am left handed (eared) and after making a call I always find that my ear has opened lots of programs whilst talking. Is there a way to lock the display while taking a call or some other solution?
Also after uninstalling PocketInformant I now find my Calender softkey key is unmapped. I have seen references that I just need to remap it using "Advance Config" but I can't find that either.
Can someone help a halfwit..!
Thanks, Steve.
Click to expand...
Click to collapse
The Advanced Config is here:http://www.cinetsystems.com/xda/index.php?path=Kaiser+Cab+Collections/
hey, I have the same problem with programs opening up with my ear. the only solution I found is to turn ur screen off while on a call (press power button) or don't press ur ear as hard to the phone
omar
thats what i did. im still seeking a software which can automaticly lock the touch screen while on the call.
The easiest way is to just push the power button on the right side of your device while you're talking, as sometimes you might want to hit the speaker phone button or use the keypad. If you use this method of pushing the power button, all you need to do is hit it again and your screen is active.
PhoneAlarm will automatically blank the screen for you when a call is connected.
http://www.pocketmax.net/phoneAlarm.html
i might be wrong but when i tested S2U2 a while ago i recall seeing something about an option to "blank screen" during calls... may be worth a try, its free and available here at xda =)
cheers
//jonte
netpixie said:
thats what i did. im still seeking a software which can automaticly lock the touch screen while on the call.
Click to expand...
Click to collapse
As in post # 6 I also recommend PhoneAlarm. Does the job really nicely for me.
Thanks for all your fast answers..!
I knew all you smart guys would know what to do...
Somehow I am able to manage to switch of my phone ...
With my ear I am entering the connection manager and than I disable the phone or enter flight mode.
I am coming from a SE P990 and here the screen is automaticaly locked during a call.
It would make defenitly sense to block the input from the touch panel during a call, but keeping the display on for basic information. On the other side I would like to have also access if I want to look for a contact information or agenda setting during a call.
Claus
There are alternative solutions like PalmarySoft Phone ScreenLock which explicitely locks the touch screen without turning it off during call.
The best is that this app. does nothing else ... no today plugins ... nothing in excess.
Simple ... yet usefull.
Does it have the functionality to unlock while you're on the call?
Say you want to look something up while on the phone....
yes it does.
Is there a way to lock onscreen phone buttons?
Everytime someone calls, and diamond is in my pocket I either accept or reject call when trying to get it out of pocket.
So can I dectivate touch screen during incoming call?
Is there any tweak for this?
Greets guys
dont own a diamond but a quickfix...get bigger jeans.
No way... too big balls will bounce
resolved!!!
the fastest way to solve your problem is to install s2u2 (slide to unlock) newest version is 1.05 what i know...
so with the right settings when incoming call, you'll need to slide then answer/reject call or setup slide to answer or other.
its great i LOVE IT..
I just installed it... then uninstalled it 5 mins later because it looks GHASTLY!!
To lock the touch screen buttons you simply hold down the End Call button for a few seconds. Or is it the physical buttons that you're trying to lock?
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
lookass said:
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
Click to expand...
Click to collapse
You are right: I do not get you.
At least I do not see your point. You want to have the phone locked during incoming calls? - how senseless is that. Especially in that moment I want to have it unlocked to be able to accept it. That is the way all my phones worked.
What do you do, if you get a call and have a your cell in the pocket? I never encountered such problems...
Jeeeeeeeezzzzzzzz !!!
In Diamond one can answer a call in two ways:
1. press onscreen button
2. press hardware button
Onscreen button can be pressed accidentaly while taking out of pocket, pouch or whatever.
So: All i want is to have onscreen buttons INACTIVE while hardware buttons ACTIVE so I can answer call ONLY by pressing answer HARDWARE button.
Tapping onscreen button will do NO ACTION.
Hope now everything is clear, cause my english isn't very good
^^and you made a joke when i offered my quick fix =P
I have the same problem that by the time I get the case out of the case i find that I accidently answered or hung up because I accidentaly touched the screen,I tried slide to answer but it is not working properly on the Diamond
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
s2u2 not working?????
if its bad, ugly, or something, put an self image as backgruond, maybee that would cheer u up, im using version 1.00 that dosent got the slide to answer working good(beta), so i turned it of, then it worked great and i can still use hardware buttuns to answer, and if u dont like the apperence just remove background an d remove clock, all thats left is a black screen and the slider...
This thing with enabled screen answer/ignore buttons pisses me off too... May be we can install a new dialler without screen buttons?
Really no one cares?
nikitich said:
Really no one cares?
Click to expand...
Click to collapse
i don't think it's about anyone caring. i think it's about the diamond being a new device and no one having the tricks/tips/tweaks yet. patience
I understand that. But if nobody care about an issue no one will look for the solution. I would install another dialer but i do not know how to uninstall the existing one.
jehlinger said:
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
Click to expand...
Click to collapse
Be great if you (or anyone else?) could find a hack for this - I have the same problem when taking the phone out of the case. It would solve my (our) problem if only the hardware buttons could answer/reject an incoming call.
Regards,
Gary.
Since nobody answered this thread anymore... Did someone find out? Or did you give up?
I need this badly, stupid on screen buttons always go off
I had the same problem but after i did this I had no problem anymore.
The answer button in default phone skin(WM6) is much smaller so the risk of accidentally reject or answer the call is not so high.
hi all,
i do have several problems with my diamond, first of all i am using an offical rom by htc its 2.03.xxx and the manila of the hd
to come to my problems i am giving u a list of problems which i were not able to solve:
1. nearly each day my diamond dials into the internet to check for email, but i didnt
2.sometimes it happens that when i am getting my diamond out of the pocket he asks me whether i am sure to turn the diamond off or not, but i didnt push the off button, especially not that long
3.the touchfield below the display is just usable with my fingers, not with the stylus or something like this, but earlier it did work with finger and stylus
4.very often it happens that when i am called that my diamond just take off the telephone call(which is nearly impossible becuase i do have the slider and to press the field down it needs very much which isnt existing in my pocket)
5. when i am controlling my volummne i have often problems that the systemloudness is very loud but the ringtone loudness stays on silent or turns on silent
i do not prefer to have a hardreset as a solution because than i would have to made all the vocabulary again
proxy] said:
1. nearly each day my diamond dials into the internet to check for email, but i didnt
Click to expand...
Click to collapse
Check the config of the mail app. Maybe you've got the 'check for new mail every X minutes' enabled.
proxy] said:
2.sometimes it happens that when i am getting my diamond out of the pocket he asks me whether i am sure to turn the diamond off or not, but i didnt push the off button, especially not that long
Click to expand...
Click to collapse
Sure you press the ON/OFF button accidentally...
proxy] said:
3.the touchfield below the display is just usable with my fingers, not with the stylus or something like this, but earlier it did work with finger and stylus
Click to expand...
Click to collapse
Mine doesn't work with stylus, so...
proxy] said:
4.very often it happens that when i am called that my diamond just take off the telephone call(which is nearly impossible becuase i do have the slider and to press the field down it needs very much which isnt existing in my pocket)
Click to expand...
Click to collapse
There's an option that automatically takes the call after a few seconds or rings. Check the phone setup.
proxy] said:
5. when i am controlling my volummne i have often problems that the systemloudness is very loud but the ringtone loudness stays on silent or turns on silent
Click to expand...
Click to collapse
When you press the up/down volume, you're modifying the system volume. On top-left of the screen you'll see an arrow. Click it and you could access to the ringtone volume.
Hope it helps.
Hi, I have a huge problem. Every time I make a call, preferably my voicemail, it asks me to press a number in the keypad.
Okay, that's fine. But the only problem is the screen blacks out immediately when the call is made and I cannot choose any of the options. I'm still in the call, although it will repeat the options for about a minute and just end the call.
I can't end the call manually or use the keypad. Tried pressing the lock button, the search, the menu, and Back button. Nothing seems to work.
Is there anything I can do about this? Because this is really becoming a hinderance.
Hi the proximity sensor should brighten the display up the moment you take it away from your ear, if it dosent prpbably there is a problem with it and you need to check it out with either the provider or HTC if you can.
normally to end call you click on the notification on top of the phone.
It is kinda annoying there is no physical button to end calls but i guess thats touchscreens for you
Probabily you use one case
that cover the proximty sensor
I don't use any case or screen protiction... maybe I should to replace it...Thanks..
dr.alkaiser said:
I don't use any case or screen protiction... maybe I should to replace it...Thanks..
Click to expand...
Click to collapse
if so, you should replace it ... sorry mate
dr.alkaiser said:
Hi, I have a huge problem. Every time I make a call, preferably my voicemail, it asks me to press a number in the keypad.
Okay, that's fine. But the only problem is the screen blacks out immediately when the call is made and I cannot choose any of the options. I'm still in the call, although it will repeat the options for about a minute and just end the call.
I can't end the call manually or use the keypad. Tried pressing the lock button, the search, the menu, and Back button. Nothing seems to work.
Is there anything I can do about this? Because this is really becoming a hinderance.
Click to expand...
Click to collapse
I had the same problem. Hard reset solved it. Also solved a problem I had connecting with intermittent connections to Wifi. I think a bum app may have caused the problems.
Starting to happen again, not like last time though. Now it's intermitent and seem to recover when the other end hangs up. May try to get a replacement phone this time.
From what I've seen around the internet this is an OS issue... And it happens to me intermittently as well, though my lock button brightens the display... It seems to have something to do with the screen timeout and the lock screen enabling itself...
Mine had the same issue.
I would pull it away from my face, nothing.
Laid it down flat, nothing
Occasionally it would flash.
I had to return it, no problems since.
The sensor must have been loose and slid behind the open area of the glass.
If you can still, get a replacement
My replacement is in the mail. I have found that if I shake or tap the phone it will flicker and come back during a call. I think the sensor is faulty.
My wife has a CDMA Hero which I rooted and installed CM7 on. It is running great, for the most part, except for the fact that she can't press the phone to her face when she is calling someone (she finds this a bit annoying). This is due to the fact that the phone app (or I guess it's really an activity for you developer folks) that runs during the call has a great big "END" button that is easily pressed when she puts the phone against her cheek.
I understand that the Hero does not use a proximity sensor to shut off the screen (I suppose that's why it has the answer and hangup buttons). I have tried installing other "Dialer" apps, but they don't actually change the app (activity) that shows during the call itself.
So, I have two questions:
1) What is the name of the app/activity that runs while a call is in progress?
2) Are there any alternatives for phones such as the Hero?
The screen should timeout in a few seconds and the screen will turn off.
Which version of CM7 are you running? Perhaps try the dialer one app in the market, there might be some bug in the cm7 one.
Shelnutt2 said:
The screen should timeout in a few seconds and the screen will turn off.
Which version of CM7 are you running? Perhaps try the dialer one app in the market, there might be some bug in the cm7 one.
Click to expand...
Click to collapse
I think it's 7.0.3, I'll have to check when I get home. I should probably update to 7.1 and see if that doesn't fix the issue.
I have tried installing a number of different dialer apps, but they don't actually change the screen you see when the call is in progress. It's always the stock screen.
like the other guys mentioned, the screen should time out after a bit, but just make sure ur screen time out is set to 30 seconds or less and under call settings make the box is not checked where it says "stay awake longer than normal"
My screen shuts out after 30 seconds, which is set under the display settings then I just wake it by pressing menu button if needed.
Good luck
V'sHERO on Tapatalk