[Q] Download mode missing?! - Galaxy S I9000 Q&A, Help & Troubleshooting

i have my 3 button fixed a long time ago and flash different custom roms before.
today i accidently took out the battery without turning the phone off, my phone freeze after the boot animation. i flash my phone back to stock and still no go.
got to flash JM5 and all of a sudden my download mode is not working anymore....
any suggestions?

joerome said:
i have my 3 button fixed a long time ago and flash different custom roms before.
today i accidently took out the battery without turning the phone off, my phone freeze after the boot animation. i flash my phone back to stock and still no go.
got to flash JM5 and all of a sudden my download mode is not working anymore....
any suggestions?
Click to expand...
Click to collapse
Try to flash with another firmware, I remember when I flashed to JM1 ( for testing purposes my download mode reverted to an older version and noticed that JM1 made a forced update ( rather downgrade ) on the Odin UI. I flashed to JM9 and I saw another message on Odin that my boot loader was updated.

how can i flash without the phone not booting up or go to download mode?

joerome said:
how can i flash without the phone not booting up or go to download mode?
Click to expand...
Click to collapse
Can you still connect to pc? You can use adb command to go to download mode, that is you still have debugging mode on.
If everything fails, use the download jig, a thread started by TheBeano.
Good luck.
Sent from my GT-I9000 using XDA App

i tried using ADB, but phone is not recognized by the computer...

Build the jig, it shouldn't be too hard even if you've never touched a soldering iron.

Related

[Q] After using an official update threw kies my phone wont start up HELP

when i plugged my phone into kies it offered me an update from 2.2 to 2.2.1 (PDA:JS5 / PHONE:JPY / CSC: JS4). i have rooted my phone before the update using Z4root and also installed voodoo lagfix using a one click installer which was on the market. after the update the phone went into recovery mode and on kies it said something like "disconnect and reconnect usb". i didnt do this and just clicked the reboot now option on recovery mode. and now my phone boots up but the OS does not start. the tmobile boot animation is no longer played, instead it is the (i am guessing) original galaxy s boot animation. after this animation the phone vibrates once, pauses and the vibrates 3 times. if i leave it on then it will do this continously. it used to do this while the phone worked on 2.2 and it ended up force closing whatever app i was using at that time. is it force closing the OS? i can no longer get into 3 button recovery mode even though i could before. i am going to try the ADK which i am new too and if it works and i get into recovery mode what should i do? factory reset? and if doesnt how can i get it to recovery mode?
i really want to get it working again thank you in advance to everyone.
UPDATE: i have tried the adk reboot recovery but it says device not found :S
kremo123 said:
when i plugged my phone into kies it offered me an update from 2.2 to 2.2.1 (PDA:JS5 / PHONE:JPY / CSC: JS4). i have rooted my phone before the update using Z4root and also installed voodoo lagfix using a one click installer which was on the market. after the update the phone went into recovery mode and on kies it said something like "disconnect and reconnect usb". i didnt do this and just clicked the reboot now option on recovery mode. and now my phone boots up but the OS does not start. the tmobile boot animation is no longer played, instead it is the (i am guessing) original galaxy s boot animation. after this animation the phone vibrates once, pauses and the vibrates 3 times. if i leave it on then it will do this continously. it used to do this while the phone worked on 2.2 and it ended up force closing whatever app i was using at that time. is it force closing the OS? i can no longer get into 3 button recovery mode even though i could before. i am going to try the ADK which i am new too and if it works and i get into recovery mode what should i do? factory reset? and if doesnt how can i get it to recovery mode?
i really want to get it working again thank you in advance to everyone.
UPDATE: i have tried the adk reboot recovery but it says device not found :S
Click to expand...
Click to collapse
Your woes are probably because you didn't disable lagfix.
But don't worry - JS5 does not disable the 3-button modes or anything. Maybe you are just releasing the buttons at a wrong time (too early / too late)? See if you can get to download mode (Vol Dn - Power - Home). If yes, you can flash JS5 (or any other stock firmware) via Odin.
Try download mode never make customication without haveing them working!
If 3btn doesn't work built a jig then flash a FULL rom(3files +pit) using odin +repartition
Or if you want it super easy just flash darky resurrection (one file+ good rom)
Could try useind adb to grlet download mode theres guid on hear how to get three button combo useing adb
Sent from my GT-I9000 using XDA Premium App
colindodds said:
Could try useind adb to grlet download mode theres guid on hear how to get three button combo useing adb
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Adb reboot download but i think it will not work if he can't connect adb....
Try hold volup+home+power and do a factory reset.
thanks everyone for helping me out however the 3tbn recovery/download mode is not working and to top it all of my internet provider cut my internet so i cant even research into this matter. this morning i turned the phone on and left for work i'll see what happened when i get home. all i really need to do is get my p.c to recognize the device so i could use adb/odin and that doesnt seem to work. i might end up having to buy/make a jig
you wouldnt beleive the luck i had. i sent my phone of for repairs to samsung while i waited for the parts to build a jig in hope that they wldnt b able to do anything and give me a new one and instead they fixed it. for free. im so happy

Bricked or Boot loop - help needed

Hi people!
I got bricked my galaxy mini gt-s5570, but not totaly (that means I can still use the download mode, and RAMDUMP ARM9 mode) but I can't power up the phone. That happened after I used ODIN for gt-s5570 and changed the Kernel (I forgot to make backup before), and device was working well with the new kernel, but after it I use the same step in ODIN to get back to the old one. So the result is, when I'm pushing the power key the screen starts to blinks and nothing more! But as I say download mode, and ARM9 mode are still working. Any solution for this?
just download the new firmware from samfirmware.com n flash it thru odin as u can go to download mode..n ur phone will be back to life again..
i accidently pressed thanks on ur first post
I can't, I don't have access to recovery mode, it doesn't work!
Explainations
ybregeon said:
I can't, I don't have access to recovery mode, it doesn't work!
Click to expand...
Click to collapse
I mean even when I flash an official rom with Odin, I still have the same problem, I am trying this since three days now and noway...
i think you tried to upgrade firmware not boot whenever you upgrade firmware it cant be downgrade it can just be more upgraded when you downgrade your firmware it will not boot up it will just show a black screen so just reinstall the firmware again and do not try to downgrade it

HELP!!!! Stuck on Boot Screen!!!!

HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
roni2915 said:
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
Click to expand...
Click to collapse
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
gee2012 said:
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
Click to expand...
Click to collapse
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
There are threads about reviving recovery i think on xda, haven`t needed them so far but look around and you will find them. If you can`t restore recovery or downloadmode then it`s off to the shop i guess
Does Odin recognize your phone, what exactly goes wrong when flashing with Odin?
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
i have the same situation like you before ...try this ..http://forum.xda-developers.com/showthread.php?t=1667886 i works for me..hope it works for you too...
"Battery Too Low, Can't Download"
Now there's another problem.
Not only I Can't flash anything, I can't even get to Download Mode because the battery is low.
When I press the Vol Down + Power + Home key, I get "Low Battery, Can't Download" in red font.
I left my phone on charge through the AC port and I had no idea it wouldn't charge. The only thing was that my phone was exteremly hot but still with zero battery. I even tried plugging the phone through the USB cable but still no luck.
I removed battery for few minutes upto 30 mins and put it back in and plugged in the charger but all I see is the empty battery symbol keeps flashing every 5 seconds.
Is there any way I can charge my battery and get back to download mode so I could try flashing the stock kernel to get past the boot screen? I even tried plugging in the USB jig that I used with my SGSII previously, but it was of no use as well.
Please Help!!!
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
ac-milan said:
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
Click to expand...
Click to collapse
i will probably take it to best buy because i dunt know anyone that owns a note.. only I'm the cool one
hopefully i can charge my battery at best buy and then go on with the process!!
Hey,
I managed to buy an external charger and I was able to go to Download Mode again.
After that I tried to flash stock kernel (stockKernelXXLA4.tar) And Odin said "Pass".
After that I was stuck on the Samsung Galaxy Note GT-N7000 Logo again.
I'm not sure what to do now!!
Please help.
Is there anything else that I could flash?
Even though I flashed a stock kernel, I still see a yellow exclamation mark..
PLEASE HELP, I NEED MY NOTE TO COME BACK TO LIFE!
Sorted this mess out!!!
I flashed "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar" And the phone now works!!!
Stock kernels didn't do the work for me, but the official ICS release did.
Thanks to all that contributed in the thread.
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
antique_sonic said:
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
Click to expand...
Click to collapse
it only took me 5-8 minutes...

[Q] No Recovery mode and No Download mode.

Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Your phone isn't running official software

G'day XDA Developers
I tried rooting my phone with Magisk then flashing the AP file via Odin in download mode then flashed twrp how ever when I boot I get the error message. Your phone isn't running official software and the phone just keeps rebooting so I think I have tripped Knox.
I can't seem to enter download mode or recovery so I am wondering how can I restore it back to stock rom and relock the bootloader? Or is my only option to RMA the phone?.
Yes by rooting your device you are actually tripping your KNOW built in fuse.
Now try to do few thing:
Download the stock firmware by using Frija-v1.4.2 software.
After that unzip the firmware file and use odin3 to flash the firmware you can read more here.
If you need TWRP use this link to install it.
after that use this link to install kernal which is having magisk inside it so you dont even need button combination.
you just need to flash kernal zip file in twrp or you can read official post here.
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
OzGreatAndTerrible said:
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
Click to expand...
Click to collapse
I have the same thing bruh.
OMFG, I have the same problem! I made everything as you said, but... When I plug my cable in S10e it continues rebooting... What I should do????

Categories

Resources