G'day XDA Developers
I tried rooting my phone with Magisk then flashing the AP file via Odin in download mode then flashed twrp how ever when I boot I get the error message. Your phone isn't running official software and the phone just keeps rebooting so I think I have tripped Knox.
I can't seem to enter download mode or recovery so I am wondering how can I restore it back to stock rom and relock the bootloader? Or is my only option to RMA the phone?.
Yes by rooting your device you are actually tripping your KNOW built in fuse.
Now try to do few thing:
Download the stock firmware by using Frija-v1.4.2 software.
After that unzip the firmware file and use odin3 to flash the firmware you can read more here.
If you need TWRP use this link to install it.
after that use this link to install kernal which is having magisk inside it so you dont even need button combination.
you just need to flash kernal zip file in twrp or you can read official post here.
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
OzGreatAndTerrible said:
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
Click to expand...
Click to collapse
I have the same thing bruh.
OMFG, I have the same problem! I made everything as you said, but... When I plug my cable in S10e it continues rebooting... What I should do????
Related
i have my 3 button fixed a long time ago and flash different custom roms before.
today i accidently took out the battery without turning the phone off, my phone freeze after the boot animation. i flash my phone back to stock and still no go.
got to flash JM5 and all of a sudden my download mode is not working anymore....
any suggestions?
joerome said:
i have my 3 button fixed a long time ago and flash different custom roms before.
today i accidently took out the battery without turning the phone off, my phone freeze after the boot animation. i flash my phone back to stock and still no go.
got to flash JM5 and all of a sudden my download mode is not working anymore....
any suggestions?
Click to expand...
Click to collapse
Try to flash with another firmware, I remember when I flashed to JM1 ( for testing purposes my download mode reverted to an older version and noticed that JM1 made a forced update ( rather downgrade ) on the Odin UI. I flashed to JM9 and I saw another message on Odin that my boot loader was updated.
how can i flash without the phone not booting up or go to download mode?
joerome said:
how can i flash without the phone not booting up or go to download mode?
Click to expand...
Click to collapse
Can you still connect to pc? You can use adb command to go to download mode, that is you still have debugging mode on.
If everything fails, use the download jig, a thread started by TheBeano.
Good luck.
Sent from my GT-I9000 using XDA App
i tried using ADB, but phone is not recognized by the computer...
Build the jig, it shouldn't be too hard even if you've never touched a soldering iron.
Hi people!
I got bricked my galaxy mini gt-s5570, but not totaly (that means I can still use the download mode, and RAMDUMP ARM9 mode) but I can't power up the phone. That happened after I used ODIN for gt-s5570 and changed the Kernel (I forgot to make backup before), and device was working well with the new kernel, but after it I use the same step in ODIN to get back to the old one. So the result is, when I'm pushing the power key the screen starts to blinks and nothing more! But as I say download mode, and ARM9 mode are still working. Any solution for this?
just download the new firmware from samfirmware.com n flash it thru odin as u can go to download mode..n ur phone will be back to life again..
i accidently pressed thanks on ur first post
I can't, I don't have access to recovery mode, it doesn't work!
Explainations
ybregeon said:
I can't, I don't have access to recovery mode, it doesn't work!
Click to expand...
Click to collapse
I mean even when I flash an official rom with Odin, I still have the same problem, I am trying this since three days now and noway...
i think you tried to upgrade firmware not boot whenever you upgrade firmware it cant be downgrade it can just be more upgraded when you downgrade your firmware it will not boot up it will just show a black screen so just reinstall the firmware again and do not try to downgrade it
Hi all,
My SGS is stuck in a bootloop, and as the title says I cannot acces the Recovery Mode.
Actually, the Download mode is accessible, however the phone shut down and go back in bootloop after less than 10 seconds. So I don't have enought time to flash another ROM.
I success once to boot my phone without any problem, but after some minutes it rebooted and was gone back into this bootloop problem.
Please, help me
anyone has any idea to help me fix this problem ?
There is a thread on how to access recovery mode using a homemade JIG or take to the service center.
ask on darkyrom its aforum for sgs phones you will get help their goodluck
solutions
Only solution is to flash stock gingerbread version via Odin
sym86 said:
Hi all,
My SGS is stuck in a bootloop, and as the title says I cannot acces the Recovery Mode.
Actually, the Download mode is accessible, however the phone shut down and go back in bootloop after less than 10 seconds. So I don't have enought time to flash another ROM.
I success once to boot my phone without any problem, but after some minutes it rebooted and was gone back into this bootloop problem.
Please, help me
Click to expand...
Click to collapse
ok so connect your phone up to odin and put your phone in download mode and flash your stock rom.should work
Enter download mode using 3 button combo and reflash stock rom..
So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?
I think you have to start from Gingerbread again
Search on samifirmware a 3 files firmware of Android 2.3.6
After that search on google a Step by Step guide how to flash a Rom with Odin.
I think after that i should work.
ChrissehB said:
So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?
Click to expand...
Click to collapse
Nothing. Never put anything in the bootloader section. Instead, look for a rom that has bootloader in it. I believe that the darky resurrection rom has bootloader.
Sent from my Nexus 7 using Tapatalk 2
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)
Boot loops with cm-10-20121125-NIGHTLY-galaxysmtd & cm-10-20121126-NIGHTLY-galaxysmtd
frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
Click to expand...
Click to collapse
Thank you very much for the information!
I was thinking I did something wrong... :crying:
Update:
The newer versions cm-10-20121129-NIGHTLY-galaxysmtd & cm-10-20121130-NIGHTLY-galaxysmtd are OK again.
With kind regards
Joe
frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)
Click to expand...
Click to collapse
I want to buy you a beer Thanks a ton
I did this on windows 7 x64 without any problems (I had to install driver from heimdall suite)
Same here, but computer WON'T detect, normally does
Hi
I'm desperate, no phone, stuck on galaxy S boot screen, will boot into download mode but not recognised by computer
Any ideas?
Thanks
hello! I am trying to repair my sister's s5570i.
for some reason, it won't boot, and when I try to restore it, it works, but when i reboot it says - can't mount /datarebooting... and still nothing..
i tried to restore the stock rom with odin, but even after installing the drivers odin not recognizing the device in download mod so it's kinda useless...
the device never been rooted btw, so i can't understand why it's happening..
does anyone got any idea?
is it just a break?
thanks!
A
You sure you're in download mode?
Try recovery mode
Download Stock
Flash it via odin
Volume Down+Home+Power to go download mode