Power up issues with rooted NC - Nook Color General

Having an odd issue with my Nook (rooted with Auto-Nooker).
When I power it off, I cannot seem to power it back on with the power button, unless I plug the USB cable in first. Any ideas? Is this normal? Thanks.

I had problems the first couple of power ups, then is started acting normal.

I just got ny nook last night and when i tried to wake it up this morning i had to plug it in. I hope it fixes itself soon.
Sent from my NOOKcolor using the xda app

Silly question perhaps, but a few people have forgotten... Did you remove the SD card with the Auto Nooter image and reformat it? Otherwise it will boot into that every time you try to turn it on.

peiziyu said:
Silly question perhaps, but a few people have forgotten... Did you remove the SD card with the Auto Nooter image and reformat it? Otherwise it will boot into that every time you try to turn it on.
Click to expand...
Click to collapse
This was my problem as well until I did what you said. Thanks for the reminder!

I was having the same issue in the beginning. Even without the sd card inserted, I'd have that issue. It seems to be fine now, though.
Are we supposed to see the Nook color custom boot animation with the little android guy on the bottom right, though? I thought it was just part of the rooting/setup.

sano614 said:
I was having the same issue in the beginning. Even without the sd card inserted, I'd have that issue. It seems to be fine now, though.
Are we supposed to see the Nook color custom boot animation with the little android guy on the bottom right, though? I thought it was just part of the rooting/setup.
Click to expand...
Click to collapse
Everytime I have rebooted I have seen that boot screen, so it should be normal

I have taken my card out and reformatted it. My issue is more so when i leave my nook alone for a long period of time and it is just sitting in sleep mode. I have to hold the power button to get it to come back on(it reboots).
Sent from my NOOKcolor using the xda app

I think that is intended, pretty sure you had to push the power button for a second or two stock as well... reduce accidental power ons?

Seems odd, but I found a way to start up my Nook Color without having to plug in the USB. If I press and hold the Home button for a few second, then press the power button, it'll come on.

The custom logo is a standard part of the rooting process. If you don't like it, you can revert to the standard by moving or renaming /data/local/bootanimation.zip

Related

[Q] Help N1 won't Power on

Hey Guys I really need your help my N1 won't power on for some reason. I really need to get some things off the phone from certain software that I had in case I have to have it repaired or sent away. I'll try to be brief what happened I was exercising with my phone inside a protective case that covers the whole phone and I went to change the next song while listening to music and when i went to push the power button the screen remained black the whole time and I couldn't see anything at all the screen was black the whole time after numerous attempts at pushing the power button. So I held down the power button to try and reboot it and then the music stopped, so then I hit the power button again to turn it on and it hasn't turned on since yesterday. I even took the battery out and let it chill for a min and still doesn't work. when I plug it in to the charger the orange/green light comes on and as well with the USB connection too, but still can get it to power on.
Anyone have any Idea what it could be? I am assuming it's the power button but I am not for sure. Is there anyway to turn it on again in case i need to recover any files, etc. the reason i want to get it to work is that I don't want to have to go through the hassle of sending it away to be repaired if there is some way I can do it myself. I am trying to avoid sending it away with my carrier and I really need to access certain files on the phone if all else fails. If anyone has any ideas I'd appreciate it thnx to anyone.
If it's a power button failure, you can put the phone on charge, then remove and reinsert the battery... keep trying, it will turn on eventually...
http://www.androidguys.com/2010/09/08/manage-nexus-broken-power-button/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed:+androidguyscom+(AndroidGuys)&utm_content=Google+Reader
Sent from my Nexus One using XDA App
it worked the first time I did it thank you so much well just in case it ever happens again how can I back up some things on my apps for example I have notes on AK notepad how would I back those up? and if I wanted to move some software to my sd card that doesn't allow it?
Hey thanks again you are a life saver!!!!!!!!
oh darn the X came up when I powered it up but still nothing just a black screen I got all excited for nothing
i got after 5 or so times of taking the battery out thnx again is there a way or software to make the N1 awake or power off with the trackball without rooting it since the power switch is buggy now?
Titanium Backup will backup apps and data to SD card.
Widget Locker has an option for trackball wake.
LockEnabler will let you turn screen off/sleep.
Quick Boot will let you reboot, boot into recovery etc. Be careful booting into recovery or boot loader, because power button is used to navigate (you have to use adb).
Sent from my Nexus One using XDA App
thnx again is there anyway to restart/reboot the phone if it is not rooted via trackball or another button?
Reboot is possible with Quick Boot (as noted above), but if you ever turn off then the battery toggle is your only option...
Sent from my Nexus One using XDA App

[Q] Nexus One CM7 power button problem

I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.

Revert to Stock OS without SD Card

Hi Guys
The SD card slot on my Nook Color broke (card won't stay inserted and just pops back out). I am currently running Phiremod, but now need to return the device to B&N and want to get the stock OS on there.
There are obviously a lot of posts out there about restoring it to the stock software, but is it possible to do this without a functioning SD card slot? If not, has anyone tried returning a NC that is running a non-stock OS?
Thanks
I had this same thing happen to me. I did a three fingered hard reboot and then wiped again from within the b&n stock OS.
Power down the nook. When the cyanogwn logo comes up, hold down both volume keys, the n key and the power button at once (hence: three finger wipe). Hold the keys down for about ten seconds until the nook powers down. It will flash and as it is rebooting, repeat the same three fingered press. You will have to repeat this operation sucessfully 8 times in a row. If you don't press the buttons correctly, or in time, the boot animation may load. If so you will have to start the process over.
After the eighth successful hard reboot, the Barnes and noble stock will oad. Complete the b&n registration process, and then go into settings and do a complete wipe/factory reset. You must do both the hard reboot and the internal stock OS factory wipe to have the nook completely reset!
It is that easy.
Edit: oh yeah, there were no issues with the return. I did call and make sure they knew what the problem was, which was obviously a hardware issue, but since it was completely wiped, this method should work for anyone and any reason, functioning sdcard slot or no.
mateorod said:
I had this same thing happen to me. I did a three fingered hard reboot and then wiped again from within the b&n stock OS.
Power down the nook. When the cyanogwn logo comes up, hold down both volume keys, the n key and the power button at once (hence: three finger wipe). Hold the keys down for about ten seconds until the nook powers down. It will flash and as it is rebooting, repeat the same three fingered press. You will have to repeat this operation sucessfully 8 times in a row. If you don't press the buttons correctly, or in time, the boot animation may load. If so you will have to start the process over.
After the eighth successful hard reboot, the Barnes and noble stock will oad. Complete the b&n registration process, and then go into settings and do a complete wipe/factory reset. You must do both the hard reboot and the internal stock OS factory wipe to have the nook completely reset!
It is that easy.
Click to expand...
Click to collapse
Thanks. Will try that tonight.
This worked well. Thanks for the instructions.
Small edit to the instructions above would be that you only have to hold down the '+' volume button when doing the three finger reset -- not both volume buttons. Also, on my version of Phiremod, there was no CM logo, so I just started the three finger reset after the "read forever" logo disappeared.
It actually took me two attempts at stringing together 8 in a row to get it to work. When it finally worked, I can't be sure that it was actually the 8th time, but just keep at it.
You guys keep surprising me every day, for real.
From running CM7, left it in the car where temp. was around 7 degrees, suddenly it returns to stock, and now running a custom ROM, just do a 8-time reboots and it's back to stock? Without reflashing stock ROM first? How that possible?
I had to return mine for the same reason and simply held the card in with my finger while wiping and restoring. Was somewhat painful and tiring but it worked. Just another reason for people not to frequently swap cards on this device.
Oh man, i tried that. I tell you what, I spent forever trying that method. For real, it made me want to smash the thing and never look back. I have some big hands, and the card kept slipping on me halfway through. It took me a while to find this method and i couldn't believe this wasn't option one instead of somewhat unknown.
That person who literally froze their nook back to stock- now that was just wild.
votinh said:
You guys keep surprising me every day, for real.
From running CM7, left it in the car where temp. was around 7 degrees, suddenly it returns to stock, and now running a custom ROM, just do a 8-time reboots and it's back to stock? Without reflashing stock ROM first? How that possible?
Click to expand...
Click to collapse
As far as I'm concerned that *is* the stock ROM. Literally, the Read Only Memory that it comes out of the factory with. Nothing short of an EMP can remove it. Mine falls back to version 1.0.0 after an 8+1.
MISRy said:
As far as I'm concerned that *is* the stock ROM. Literally, the Read Only Memory that it comes out of the factory with. Nothing short of an EMP can remove it. Mine falls back to version 1.0.0 after an 8+1.
Click to expand...
Click to collapse
Until that day, I am always under the impression of flashing custom ROM means OVERWRITES the stock ROM, no? If what's you said is true, then flashing custom ROM was just placing it ON TOP of the stock one.
Yeah, you literally can't lose the factory ROM. Its a beautiful thing. Having the sdcard as the primary boot makes the nook an ideal hacking tablet. I have torn through and messed with just about every system file and database I could think of, because it was all risk free.
I know that the tech moves fast, and people have their new darlings, the luster wears off and all that, but the nook is probably my favorite gadget I've ever bought. Unkillable.
LOL , after using NC for almost a year, I still find something to love the NC even more
It is awesome.
still trying
Am I doing this wrong?
Do I try the three finger wipe when the cyanogen(mod) symbol comes up or when the cyanogen(mod) 7 animated logo starts? All I wanted is access to Android apps( being from Canada).
Tried more than 8 times at the first symbol, but it comes up but the text ....Booting into recovery... Am I too quick on the trigger? Please excuse the old fart with big fingers. Thanks for any replies.
squarehdca said:
Am I doing this wrong?
Do I try the three finger wipe when the cyanogen(mod) symbol comes up or when the cyanogen(mod) 7 animated logo starts? All I wanted is access to Android apps( being from Canada).
Tried more than 8 times at the first symbol, but it comes up but the text ....Booting into recovery... Am I too quick on the trigger? Please excuse the old fart with big fingers. Thanks for any replies.
Click to expand...
Click to collapse
Start with the Nook completely powered off.
Press and hold the Pwr. button, the Vol. + button, and the n button until you see the screen flash.
Release all buttons for 1 sec then press and hold only the Pwr. button until the Nook powers down. (Backlight off) This works best in dim lighting.
Do it again.
Do it 8 times in a row and the next time it will install the image stored internally and you will be back to what it came out of the box with.
If you goof up the timing and it starts to boot up you will have to power it down again and start over at count one.
I have done this several timems on 2 different Nooks and it always works.
Oh and stop with the old fart stuff. I'm 60.
This was extremely helpful when for some reason it wasn't letting me restore the device in the first place. I really should've known about this but I appreciate it greatly and it is pretty great that it works so easily.
Harrybub said:
Start with the Nook completely powered off.
Press and hold the Pwr. button, the Vol. + button, and the n button until you see the screen flash.
Release all buttons for 1 sec then press and hold only the Pwr. button until the Nook powers down. (Backlight off) This works best in dim lighting.
Do it again.
Do it 8 times in a row and the next time it will install the image stored internally and you will be back to what it came out of the box with.
If you goof up the timing and it starts to boot up you will have to power it down again and start over at count one.
I have done this several timems on 2 different Nooks and it always works.
Oh and stop with the old fart stuff. I'm 60.
Click to expand...
Click to collapse
So what your saying is that I can restore my NC back to stock even if I've installed CM7 directly to the emmc, using the 3 fingered "salute" boot? I think I did something like this months ago, but my NC has been on the full android for so long now, I want to return it to B&N stock seeing as I have an android phone now...and maybe start over again.
Sent from my R800x using XDA
brsingr said:
So what your saying is that I can restore my NC back to stock even if I've installed CM7 directly to the emmc, using the 3 fingered "salute" boot? I think I did something like this months ago, but my NC has been on the full android for so long now, I want to return it to B&N stock seeing as I have an android phone now...and maybe start over again.
Sent from my R800x using XDA
Click to expand...
Click to collapse
I've never tried it in that exact situation but I think the answer is yes...
i tried this and after the 3rd attempt, the Rom manager menu appears and now i am on a rom menu loop, I hit reboot, the cyanogen logo appears and then the ROM manager menu!
not good!
I boot using sd card that was formatted with CM7.2 and works fine.
help please!
thanks!
Lakland said:
i tried this and after the 3rd attempt, the Rom manager menu appears and now i am on a rom menu loop, I hit reboot, the cyanogen logo appears and then the ROM manager menu!
not good!
I boot using sd card that was formatted with CM7.2 and works fine.
help please!
thanks!
Click to expand...
Click to collapse
I think you mean the Clockworkmod menu, not ROM Manager. If you are in a recovery bootloop, which it sounds like you are, go to my tips thread linked in my signature and look at item A8. Follow what it says and it may get out of it.
mateorod said:
I had this same thing happen to me. I did a three fingered hard reboot and then wiped again from within the b&n stock OS.
Power down the nook. When the cyanogwn logo comes up, hold down both volume keys, the n key and the power button at once (hence: three finger wipe). Hold the keys down for about ten seconds until the nook powers down. It will flash and as it is rebooting, repeat the same three fingered press. You will have to repeat this operation sucessfully 8 times in a row. If you don't press the buttons correctly, or in time, the boot animation may load. If so you will have to start the process over.
After the eighth successful hard reboot, the Barnes and noble stock will oad. Complete the b&n registration process, and then go into settings and do a complete wipe/factory reset. You must do both the hard reboot and the internal stock OS factory wipe to have the nook completely reset!
It is that easy.
Edit: oh yeah, there were no issues with the return. I did call and make sure they knew what the problem was, which was obviously a hardware issue, but since it was completely wiped, this method should work for anyone and any reason, functioning sdcard slot or no.
Click to expand...
Click to collapse
I have been tryin to do this but after the 4th/5th try it boots into recovery. Am i doing something wrong:crying:

[Q] Nook HD+ won't turn on but backlight does

Hi all,
We got our Nook HD+ on Wednesday. I was intending to root it and install CM 10.1 but haven't even got that far before problems have started. I thought I'd post this just in case anyone else had the same problem. When the problem first started, it still should have had plenty of charge left. I had been using it to read a book and play a game earlier in the day. I turned it off after use; now it won't boot back up again. The backlight seems to come on for a few seconds but then goes off. Holding Power and 'n' does nothing except turn the backlight on as previously mentioned.
We have not modded this device in anyway, neither is there a micro-SD card in the device. It is now fully charged but still presenting the same issue.
If anyone has come across this before, or knows another way to do a hard reset, please let me know.
Thanks, Peter
Let it charging for a while then try what you did again.
extrem0 said:
Let it charging for a while then try what you did again.
Click to expand...
Click to collapse
That's what I did this morning. No difference.
iamthefish said:
Hi all,
We got our Nook HD+ on Wednesday. I was intending to root it and install CM 10.1 but haven't even got that far before problems have started. I thought I'd post this just in case anyone else had the same problem. When the problem first started, it still should have had plenty of charge left. I had been using it to read a book and play a game earlier in the day. I turned it off after use; now it won't boot back up again. The backlight seems to come on for a few seconds but then goes off. Holding Power and 'n' does nothing except turn the backlight on as previously mentioned.
We have not modded this device in anyway, neither is there a micro-SD card in the device. It is now fully charged but still presenting the same issue.
If anyone has come across this before, or knows another way to do a hard reset, please let me know.
Thanks, Peter
Click to expand...
Click to collapse
Did you try holding the power button for like 15 seconds, releasing and then briefly hold the power button? If you hold it too long, it turns itself back off.
If you tried that and are sure it is charged and it does not turn on, it is a hardware issue and it is time for a warranty exchange at the B&N store.
Sent from my BN NookHD+ using XDA Premium HD app
Had a similar issue the first time... Power it on... Plug the charger, leave it with the screen looking like this and wait 20 minutes. Reboot and check if it boots properly. If not, try rebooting by holding the power button and the volume buttons simultaneously...
KostasR said:
Had a similar issue the first time... Power it on... Plug the charger, leave it with the screen looking like this and wait 20 minutes. Reboot and check if it boots properly. If not, try rebooting by holding the power button and the volume buttons simultaneously...
Click to expand...
Click to collapse
Thanks. I went on the Nook UK support chat and they couldn't instruct me to get it started again. It's been returned and hopefully our replacement will be on the way soon. Possible hardware fault was the suggestion.

HD+ with CM 12.1-20151018 Startup Issue

Until recently, my HD+ has continued to labor on almost flawlessly since converting over to full Android quite some time ago. It is currently running v5.1.1/CM 12.1-20151018 Ovation.
In the last two months it has started to simply not boot up (even while fully charged) unless I plug it in. Even then, it takes several minutes before it boots. I can get it to reboot while unplugged, but if I fully shut it off by holding down the power button, it will not restart unless I plug it in again.
Have had to go to holding the power button down for full shutoff as it also will spontaneously reboot if you select power off from the menu.
As it has not exhibited any issues until now, I am clueless as to what is going on.
I am using it only for viewing photos taken with my digital camera via its sd card, using it for graphic novels, and using the Prestigio ereader for for ebooks with photographs and color plates.
Other than the apps for the graphic novels and Prestigio, I have it totally stripped down and don't even use the wifi connection.
Will be very greatful for any assist with fixing this.
Could it be as simple as refreshing 12.1 or should I go back to 11.1?
PS: Appears to be related to having the sd card inserted or not. Will start with card out when it won't with it in. Cannot reboot into TWRP.
PPS: It was definitely the sd card used to configure the Nook. Replaced it with a clean one and (almost) all of the problems disappeared.
Still does a spontaneous reboot if I use the software "Power Off" from the menu once the power button is pushed.
If I hold the power button it will fully turn off and not reboot. and then starts normally.
For the limited use I have configured it for, I should leave "well enough" alone at this point.
Any ideas as to the spontaneous restarts???
It still has one of the best screens around!!!
Thanks in advance.

Categories

Resources