FC after update (from jm1 to jpy) - Galaxy S I9000 Q&A, Help & Troubleshooting

i had jm1 installed (with repartition). everything works fine, but when i after i update to jpy, the phone vibrates and doesnt start. do you have a sollution for me ?

How did you update the phone to JPY, with ODIN or KIES?
Im assuming that since you mention repartition you used ODIN? Perhaps try flashing again. Early on, i had a bad flash, simply had to do it again to work.

Where did you get the firmware? and which files were included? If there is only one file .tar which goes into pda dont repartition if theres 3 then tick repartition.

Related

Anyone have 513.pit?

Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Think this is it > http://www.multiupload.com/4N0NMBO0WE
stluciasound said:
Guys,
Does anyone have file 513.pit, Ineet it to flash DXJF4 firmware to my phone. It's bricked now....and already tried to wipe factory settings but it fails.
I already downloaded the DXJF4 firmware, but I still need 513.pit. please help...
Click to expand...
Click to collapse
Here is:
http://rapidshare.com/files/415962748/s1_odin_20100513.pit
You guys are god! thx!
what is the diffrence between 512 anf 513 pit files.. I flashed JP3 with 512 was I correct or should I have used 513
if its working then dont worry m8
if you use the same pit file all the time you dont hav to repartition when you change pit file you repartition
regards
Just use 512 for everything.. 513 doesn't seem to work for late builds
513 doesn't work, but it's still good to have around.
I wanted to flash JM1 and, for some reason, odin wasn't flashing it, no matter what. I tried ticking the "re-partition" option (with 512.pit) and odin was just waiting there, never actually re-partitioning the phone.
So I flashed the firmware with 513.pit (which obviously didn't work, but odin re-partitioned). Then, I re-flashed with 512.pit this time and odin re-partitioned it properly.
Always good to have alternatives laying around.

[Q] How to Flash XXJPY

Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs

[Q] BlackScreen *WITH* DOWNLOAD mode working

Hi guys i searched for other threds before making this one but none of them had download mode working
i tried flashing jpy and jpx with odin using the 512 and the 813 pit files, my problem is that after showing the sgs screen(really effing loud) the screen goes dark and vibrates in a pattern that goes like ........1....2................1...2...........1............2 and repeats, i can accces both the download and recovery modes
Extra maybe important info:
came eclair jm4 flashed with kies then from jm7 i think with the bujp5 modem(the vodafone one) tried to flash jpy & jpx still stuck on darkscreen
in odin i only had the pit+pda checked with repartition, autoreboot and f.reset time ticked. Did i miss something?
I also tried to flash jpo, no dice.
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Cypher_X said:
Try to flash an other firmware (2.1)
Take it from samfirmware
They supply 3in1 packages that need to be put in only pda
Use pit 512
Repartition
If that worked, then try a 2.2(.1)
______________________________
Send from my shiny gadget!
Click to expand...
Click to collapse
As Cypher_X said try 2.1 i always go jm8 never failed me
Ok thanks gonna try with that
Sent from my X10i using XDA App
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
calexus1182 said:
Ok that worked booted up perfectly fine but....I retried flashing jpy and I keep getting the damm dark screen could the file be corrupted or something? Also don't know if this is normal but after flashing I always get booted up in recovery that didn't happen when on kies again don't know if this is normal
Click to expand...
Click to collapse
Where did you get jpy from? I got mine from samfirmware and had no dramas. Went from jm8 to jpy you could always flash a 2e recovery kernel cf root for example then install cwm so you can install custom jpy roms..i use darkys and love it
Got it working : D For any future reference flash jm8 with repartition on then jpy with repartition off...
on another note what do I do when I already have jpy working and want a clean instal of it plus different modem and kernel? (repartition on/off, do I use any pit files ?
Happy new year
can someone please tell me where to get these files from?
i've searched but keep getting the wrong pit or stock firmware..
i'm a noob and i'm confused, excuse me of my ignorance but i've tried sooo much lol
btw i have a bell I9000M which i think is my problem.. help

can i flash 2.1 after 2.2.1?

Hi, i had one piece i9000 and flashed it with 2.1 version I9000JPJG. After this i got blue circle and no network. So, i fullflashed it with 2.2.1 I9000XXJPU and i got my network back. Just wondering after this can i flash 2.2 I9000JPJPG on this phone to get arabic language? Thanks.
Yes You Can
Odin. Repartition your phone with the pit compatible with 2.1 ROM,, and then update from there. Did the same yesterday myself. It's a bit tricky. So make sure your 3 Button Recovery is working.
darklordkk said:
Odin. Repartition your phone with the pit compatible with 2.1 ROM,, and then update from there. Did the same yesterday myself. It's a bit tricky. So make sure your 3 Button Recovery is working.
Click to expand...
Click to collapse
Sorry i dont understand...should i first just flash my phone with 512 pit and repartition ticked, then flash I9000JPJPG as pda since it is just one file and not tick repartition?
I want to downgrade from 2.2.1 I9000XXJPU stock firmware to 2.1 I9000JPJG8 stock firmware. Can someone please explain how to do that?
Well i flashed the phone with I9000JPJPG and everything ok
http://forum.xda-developers.com/showthread.php?t=723596
Flash via Odin
jje

Galaxy Odin Stuck on "Set Partition" (Emergency, Please Help!)

Hello,
I just wanted to upgrade to XWJS5, so I flashed JPU with 512 pit and re-partition checked (so then after it I flash JS5 with 803 pit and no re-partition)
Now odin is stuck on "Set Partition" stage and my phone doesn't even show any progress, what should I do?
I don't want to brick my phone
Please answer me ASAP, my phone is stuck here now
The USB is still connected... anyone please?
did you definitely uncheck re partition ??? and have you got all 3 files ??
I flashed stock JS5 with 512 pit (even tho samfirmware says 803 pit )
and its worked like a charm,,, dont panic just breathe and relax and try again.
I'm flashing JPU right now not JS5. You know because JS5 has only 1 file if I flash it alone phone wont bootup.
Re-partition is on, pit is 512, firmware is JPU and CSC/Modem files are selected correctly. Will my phone brick if I unplug it or maybe close odin?
IT WILL BRICK but it will just be a soft brick which means you can fix it by flashing another ROM thru odin...
you will be fine just make sure download mode works after u unplug it
and also js5 comes in 3 files now its on here somewhere,,, download that and flash it
So shall I unplug it now or close odin? And after i've unplugged it, should i re-open odin or keep it there and press flash button?
Can you please give me the 3 files JS5 link? I found one but i'm not sure if it's the correct one.
well you cant keep it plugged in forever lol, unplug it, restart odin. make sure kies (if you have it) is closed (even in the icon tray) and download XWJS5 link is below. flash that with PIT and RE-PARTITION and that should fix it
http://forum.xda-developers.com/showthread.php?t=955712
Try this too http://forum.xda-developers.com/showthread.php?t=954377 its a more in-depth instruction guide
Issue solved, thanks alot!

Categories

Resources