Related
I was wondering if anyone else was experiencing this also. Sometimes my milestones touch screen start goin all crazy an pushing buttons an sliding pages an pretty much making a huge mess.This has happened before, an it went normal after 4 to 5 hours later, an now its happening again. I did some research sayin somethin about the touch screen an its reaction to humidity an stuff, but i wasnt sure. So im hoping someone here knows what is up an can tell me what i have to do.
TONKAFORCE said:
I was wondering if anyone else was experiencing this also. Sometimes my milestones touch screen start goin all crazy an pushing buttons an sliding pages an pretty much making a huge mess.This has happened before, an it went normal after 4 to 5 hours later, an now its happening again. I did some research sayin somethin about the touch screen an its reaction to humidity an stuff, but i wasnt sure. So im hoping someone here knows what is up an can tell me what i have to do.
Click to expand...
Click to collapse
Did you have your phone plugged in to a USB charger at the time? Was it the stock charger?
no, it doesnt happen jus when its chargin, it happens randomly, an no its not a stock charger, but i dont see what that would have to do with the screen goin crazy pushing everythin
TONKAFORCE said:
no, it doesnt happen jus when its chargin, it happens randomly, an no its not a stock charger, but i dont see what that would have to do with the screen goin crazy pushing everythin
Click to expand...
Click to collapse
Well, I would suggest that you try reverting back to using the stock charger for a few days and see if that helps. Using other chargers (esp from ebay) can cause similar effects on the Milestone/Droid due to voltage variances.
ill give it a try, an let you know what happens, thing is i bought the phone alone with no stock charger, so im gonna have to check on ebay for a stock one, but thanks again
TONKAFORCE said:
ill give it a try, an let you know what happens, thing is i bought the phone alone with no stock charger, so im gonna have to check on ebay for a stock one, but thanks again
Click to expand...
Click to collapse
Well, try buying a stock one from an authorized Motorola dealer. Every since I purchased one on ebay, I always make sure my Moto chargers come in a sealed, hard plastic, package in attempt to improve authenticity (However, I'm not sure how much that buys me).
Good luck.
I get this same issue.
Unplugged or not, on various roms from stock to motofrenzy.
sometimes the screen will just become really crazy.
If i open a webpage and just hold my finger on the screen in one place it will zoom in scroll up and down, all sorts.
I verified what was happening by downloading Multitouch visualiser 2 from the Market.
A reboot always fixes the problem
Its kinda frustrating, because i know that Moto just direct you to the place of purchase and i was not the original purchaser, so i have no chance of a warranty repair.
yeah ive tried everything, its driving me up the wall, its been like this for the last 30 hours,an i cant even use the phone, this is the worst it been, it usually goes away after 5 to 6 hours , but now its jus gone crazy, an ive restarted an removed the battery countless of times
but burko, are you using a sock wall charger or a ebay or differant brand wall charger.thanks
knowthenazz said:
Well, try buying a stock one from an authorized Motorola dealer. Every since I purchased one on ebay, I always make sure my Moto chargers come in a sealed, hard plastic, package in attempt to improve authenticity (However, I'm not sure how much that buys me).
Good luck.
Click to expand...
Click to collapse
could you tell me how much the out put of volts an amps the motorola milestone wall charger is, thanks
I actually use a BlackBerry charger, as i assumed Micro-Usb would be the same for all manufactures, but as above, it does start the screen going mad, as soon as i unplug it, it stops!
Ill see if i can make it go mad without being plugged in!
Good shout Knowthenazz!
That happened with me, when the temperature degree outside is very high, I live in region the degree reach to 48degree, my phone screen goes crazy, so I think your charger make your phone very hot, so the sensitivity of your screen begin not work properly. I'm note sure, just want to share my idea.
Thanks,
well its been about 4-5 days already, an my phones touch screen still goin crazy, i thought maybe id go back, like the other times, but this time seems permanent an its extremely depressing thinkin about it cus i jus got it like a week and a half ago off a guy.ive tried countless of chargers, even my bros motorola backflip charger, an nothin. so im gonna assume its permanently gone. i would switch the digitizer but thats gonna cost money an might jus lose the entire phone, so im jus gonna throw it back on ebay an go back to my htc hero an jus wait for the milestone 2 to come out. but if anyone does find a solution please post it here. thx everyone R.I.P. MILESTONE
TONKAFORCE said:
could you tell me how much the out put of volts an amps the motorola milestone wall charger is, thanks
Click to expand...
Click to collapse
All chargers using the micro USB spec should be the exact same voltage (and different current ratings depending on the charger, although different current values shouldn't affect your screen at all). I suspect that the voltages are very close, if not generally the same, but, the voltage may slightly fluctuate (or ripple) over time, which I believe may be causing the issue. The better quality the charger, the more constant the voltage.
If I were you I'd purchase an authentic Motorola Micro USB charger, and call it a day.
Burko said:
I actually use a BlackBerry charger, as i assumed Micro-Usb would be the same for all manufactures, but as above, it does start the screen going mad, as soon as i unplug it, it stops!
Ill see if i can make it go mad without being plugged in!
Good shout Knowthenazz!
Click to expand...
Click to collapse
Glad I could help!
Not sure if this is true, but, I heard that most Motorola chargers work on Blackberry units, but, the converse isn't always the case.
well its been about a week and a half an the crazy screen thing finally stopped, i used my friends motorola backflip charger, an seems like evrything is back to normal, but now the "back" button does not work, an it really is a verry important button, so im jus hopin time will fix that button too
TONKAFORCE said:
well its been about a week and a half an the crazy screen thing finally stopped, i used my friends motorola backflip charger, an seems like evrything is back to normal, but now the "back" button does not work, an it really is a verry important button, so im jus hopin time will fix that button too
Click to expand...
Click to collapse
Glad things are returning back to normal for you with regards to the screen.
Not sure what's going on with your back button though. Hope it works itself out for you.
knowthenazz said:
Glad things are returning back to normal for you with regards to the screen.
Not sure what's going on with your back button though. Hope it works itself out for you.
Click to expand...
Click to collapse
thanks for your help knowthenazz an everyone else =]
Go to a service center asap!
Dude, use your warranty. Take it to a service center.
Mine happened the same, and I decided to send it back to motorola and just got it back yesterday.
They replaced the glass screen and the frame which surrounds the glass.
It seems they removed that plastic from behind the screen on the slider, or also replaced the slider module.
I'd guess it might be a known issue for motorola, because my phone had scratches on the glass, plus a small crack on the screen ( yeah, I know, it's gorilla glass, but I'm an orc with mobiles ), the metal frame was all dented, and they replaced it anyway, when they could just said "this is misuse, it's failing because you drop it several times, go buy another one"
I already had this issue a few months before, it got better and I decided to keep on, and then it started again and got unusable, so don't get excited about it getting better, because probably will eventually start failing again.
AdrienC said:
Dude, use your warranty. Take it to a service center.
Mine happened the same, and I decided to send it back to motorola and just got it back yesterday.
They replaced the glass screen and the frame which surrounds the glass.
It seems they removed that plastic from behind the screen on the slider, or also replaced the slider module.
I'd guess it might be a known issue for motorola, because my phone had scratches on the glass, plus a small crack on the screen ( yeah, I know, it's gorilla glass, but I'm an orc with mobiles ), the metal frame was all dented, and they replaced it anyway, when they could just said "this is misuse, it's failing because you drop it several times, go buy another one"
I already had this issue a few months before, it got better and I decided to keep on, and then it started again and got unusable, so don't get excited about it getting better, because probably will eventually start failing again.
Click to expand...
Click to collapse
thing is i bought it off anothere guy, an he was a phone dealer an it was given to him as a gift from motorola, an like it had no papers or charger or service carrier, jus the phone alone straight form hong kong. an yeah couple hours later my screen went crazy again, so its on ebay atm lol, but thanks anyways
It happened with me too. Somebody told me that was cause by sweat. So i took it to service center.
started happening to me yesterday, anyone know a fix yet?
My phone (model 1007) had been rooted and running Serendipity. All was well until I had trouble with phone calls. So I unrooted and reflashed to stock. I reformatted and it was like brand new, out the box. I didn't have the time to reroot so I kept it clean. I pressed on 'update' on the settings menu (was that stupid of me?) and it just shut down. So NOW,
I can't turn it on! My phone starts to turn on but just shows this little spinning circle and the screen goes black. I can get into download and recovery though, so that's good right?
The phone will only charge. The very FEW times I actually got it to turn on the phone said that the USB was connected when it wasn't!
Could someone please, please help me?
Also, this is a phone from the warranty dept. It's refurbished because my other Captivate wouldn't turn on (I'm just having some sucky luck, right?)
So am I still able to return it? It's been less than 90 days i got it and has never been in contact with water or dropped. In fact, I always cradle it in a nice case.
I'm just terrified of the horror stories I've heard about Samsung warranty dept and AT&T's warranty dept. I don't want to give it to them to have some crazy $500 charge, you know? I think I don't have anything to worry about but it just freaked me out.
I had a similar experience, but mine caught itself in a reboot loop. I wa able to get back into download mode and re-flash, fixing the issue.
Have you tried to see if it will at least go into download mode?
Sent from my SAMSUNG-SGH-I897 using XDA App
Restless101 said:
My phone (model 1007) had been rooted and running Serendipity. All was well until I had trouble with phone calls. So I unrooted and reflashed to stock. I reformatted and it was like brand new, out the box. I didn't have the time to reroot so I kept it clean. I pressed on 'update' on the settings menu (was that stupid of me?) and it just shut down. So NOW,
I can't turn it on! My phone starts to turn on but just shows this little spinning circle and the screen goes black. I can get into download and recovery though, so that's good right?
The phone will only charge. The very FEW times I actually got it to turn on the phone said that the USB was connected when it wasn't!
Could someone please, please help me?
Also, this is a phone from the warranty dept. It's refurbished because my other Captivate wouldn't turn on (I'm just having some sucky luck, right?)
So am I still able to return it? It's been less than 90 days i got it and has never been in contact with water or dropped. In fact, I always cradle it in a nice case.
I'm just terrified of the horror stories I've heard about Samsung warranty dept and AT&T's warranty dept. I don't want to give it to them to have some crazy $500 charge, you know? I think I don't have anything to worry about but it just freaked me out.
Click to expand...
Click to collapse
The OTA update ATT sent out has been known to cause these issues on some phones, Here are your 2 options. 1. Return it and get another referb. 2. Go down to your local Radio shack and get the parts for a jig, (directions in the forums. A search for Jig will get you there) and then not worry about much flashing roms from then as a Jig will work 99.9% of the time.
That is of course after you see if you can get into download mode without the jig.
lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!
Restless101 said:
lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!
Click to expand...
Click to collapse
Yes. Sure shot option. Worked like a charm for me
Restless101 said:
lol I've tried jigs before. I suck at making them and it never worked for me. Clearly, I've been too sloppy in making them. I can get into download mode. But I've already reflashed with the same results. If I keep getting the same results I'm afraid someone will tell me I have a hardware issue.
Is the jig the only thing left to try?
Thanks soooo much for replying!
Click to expand...
Click to collapse
Ok you can get into download mode so you should be ok. What have you been flashing?
#1 dont need a jig - just 3 resistors
http://forum.xda-developers.com/showpost.php?p=10112309&postcount=1
HINT dont touch the resistor leads with your bare fingers, it can change the resistance, especially if youre sweaty. USE TAPE on the ends
#2 if you dont think you can do that, you can buy a premade jig on ebay DELIVERED for under 10 bucks, i just ordered one for 8 just in case.
Trusselo said:
#1 dont need a jig - just 3 resistors
http://forum.xda-developers.com/showpost.php?p=10112309&postcount=1
HINT dont touch the resistor leads with your bare fingers, it can change the resistance, especially if youre sweaty. USE TAPE on the ends
#2 if you dont think you can do that, you can buy a premade jig on ebay DELIVERED for under 10 bucks, i just ordered one for 8 just in case.
Click to expand...
Click to collapse
use this one buddy and be patient with it. it works if you need help you can pm me cause ive been there before.
It's not rooted and doesn't have anything on it. Pretty much stock. Sent a text msg this morning and checked my email from it. Came back to it abt 20 minutes later and it won't even turn on. Tried charging it. Won't turn on. Tried swapping with my regular battery (which was fully charged when I put it away. It could be dead by now.). Nothing. Tried removing the battery, waiting, replacing the battery. Nothing. I did briefly get the M Dual Core icon and then all went blank.
Suggestions?
Back to VZW. Sounds like a faulty handset.
Good Luck,
RMD
rduckwor said:
Back to VZW. Sounds like a faulty handset.
Good Luck,
RMD
Click to expand...
Click to collapse
I second this.
Without going through the pain of returning it, would you be able to connect it to your computer, and reflash the (is it TRZ?) file through the new RSD Lite through the stock bootloader? Definitely worth a try.
BFirebird101 said:
Without going through the pain of returning it, would you be able to connect it to your computer, and reflash the (is it TRZ?) file through the new RSD Lite through the stock bootloader? Definitely worth a try.
Click to expand...
Click to collapse
idefiler6 said:
I second this.
Click to expand...
Click to collapse
rduckwor said:
Back to VZW. Sounds like a faulty handset.
Good Luck,
RMD
Click to expand...
Click to collapse
Thanks, all.. Hauled my cookies 30 minutes over to Verizon. The sales rep assumed I hadn't bothered to charge my phone. When he realized it wasn't the battery, he was extremely helpful and replaced the phone on the spot. He said he'd never seen that before and with a phone less than 1 month old, I shouldn't have those kinds of issues. Kudos to Verizon for a pleasant experience. I've had some bad experiences in the past, but this gentleman was helpful and didn't try to sell me any accessories! ;p (They always try to sell me something when I'm there.)
BFirebird101 said:
Without going through the pain of returning it, would you be able to connect it to your computer, and reflash the (is it TRZ?) file through the new RSD Lite through the stock bootloader? Definitely worth a try.
Click to expand...
Click to collapse
This is referencing what one would do if the software had an issue, if it does this will fix it but kinda sounds like hardware. I have returned my Bionic to stock twice its fairly easy, computer does almost everything. Here is this to get you going if you wanna do it.
http://forum.xda-developers.com/showthread.php?t=1262540
Just remember, phone has to be in fastboot mode to be detected by RSD Lite and once its detected and the file starts flashing, if it seems like its not making progress while saying otherwise, dont unplug it just wait
Sent from my DROID BIONIC using xda premium
BFirebird101 said:
Without going through the pain of returning it, would you be able to connect it to your computer, and reflash the (is it TRZ?) file through the new RSD Lite through the stock bootloader? Definitely worth a try.
Click to expand...
Click to collapse
One would need the ability to turn the phone on in the first place for this to be attempted. That's why no one was mentioning the FXZ.
The phone booted to the dual core M logo, which with myself that happens to be as far as mine would go when i successfully flashed my FXZ. The phone needs to boot to the fastboot screen which can be done on many occasions that the phone can get to the first logo, as long as there is battery left.
....
But congrats on the new replacement i just saw that after i posted
Sent from my DROID BIONIC using xda premium
It hasn't happened to me but I have to pull the battery on my wifes Bionic at least once a week and twice in one day. It would just go away suddenly and act like it was dead. I may return it for a replacement.
if anyone has exchanged their Bionic for a replacement because of the BSOD defect, will you please provide feedback in this thread? thanks
hi all:
just bought a bionic off ebay for cheap ($20 + free ship) but it has problems
it was being sold as "battery with water damage but phone is not but wont power on"
he said one night he left it in his drawer and when he woke up it didn't work anymore he tried removing battery and all that.
to my understanding the battery was previously water damaged and he could still use it and then got the wont power on later on.
anyhow to my question
the phone comes today with just the phone, water damaged battery and wall charger.
should I cut the end off the charger and do the wires to the battery and insert battery into phone and plug usb cord from laptop to the phone?
isn't this the correct way for bsod and a non water damaged battery?
is there anyway to test the waterdamaged battery to see if it could still be good?
I have a multimeter
I thought I got lucky and got a N7 without any problems but it looks like my micro USB port is defective! The plug only works if I lightly push it down, the contacts inside aren't connecting properly. I've attached a picture showing how I had to rig it to get it to charge.
Interesting. Mine has been on charge for 5 hours and it still won't switch on or give any charging notifications. I've already requested a refund from google, but if this works I'll at least be able to spend the £15 play credit on books!
when come out of the package, there is a clear tape/wrap around the plug, did you remove that? I didn't bother to remove mine and I find the usb plug to be pretty tight.. tighter than all other devices I've owned..
Odd, if anything my USB port/cable are tighter than any other device I own.
Sent from my i777 using xda app-developers app
m52 power! said:
I thought I got lucky and got a N7 without any problems but it looks like my micro USB port is defective! The plug only works if I lightly push it down, the contacts inside aren't connecting properly. I've attached a picture showing how I had to rig it to get it to charge.
Click to expand...
Click to collapse
You're keeping it, in this state? RMA is your friend
This sucks! I need to be able to use this device daily for work. It's replaced an older one I've gotten rid of. Will Google send a new one first?
try replace a cable first?? Use one from your phone and see how's the fitment first. Could be just the cable.
I have noticed that the one that shipped works fine, but I have another one with a longer cord (so it can sit on my desk and charge it's a long way to the floor) and that one slips out unless it's sitting on the desk I can't use it or the plug will fall out.
Mine seems to be the tightest fit of any device yet but I have left the plastic on the tip.
If you have to rig it like that it more then likely has a bad solder joint meaning it the charging port needs to be re-soldered back down to the phone, or the port may need to be replaced because one or more of the legs has broken off of the back of the port, or one or more of the pins inside the front of the port is bent out of place.
Sent from my Nexus S 4G using xda app-developers app
kumqwat said:
Interesting. Mine has been on charge for 5 hours and it still won't switch on or give any charging notifications. I've already requested a refund from google, but if this works I'll at least be able to spend the £15 play credit on books!
Click to expand...
Click to collapse
Using prepaid is only available on the Nexus 7 AFAIK
Sent from my Nexus 7 using xda app-developers app
I have the same problem...though mine isn't as extreme as yours. Mine is just loose. Thankfully it connects. But it looks like is bending like crazy. I have to wait for gamestop to get more n7 till I can exchange it. Asus really screwed the pooch on this device. So many defects.
Sent from my Nexus 7 using Tapatalk 2
I've tried 2 other micro usb cables, the original works best. The original is actually extended a bit longer than any other micro usb I've seen.
m52 power! said:
This sucks! I need to be able to use this device daily for work. It's replaced an older one I've gotten rid of. Will Google send a new one first?
Click to expand...
Click to collapse
Yes, ask for an Advanced RMA. Although, to get one you need to give them some payment information. They send you another device and put a hold on your credit card until they receive the other device.
Sent from my Nexus 7 using xda premium
I bought mine from GameStop. Will Google still ship me a new one? There has to be a factory warranty on it, right?
Sent from my Nexus 7 using Tapatalk 2
My USB port has become loose after a week of general use and charging. Going to contact Google for repair / replacement I think. Not the first device I have had this problem on - although I doubt like my Alienware they will send an engineer out to fix it on site (now that is service).
Ive got this problem now too. GOing to return it tonight and hopefully get a new one.
Had to return mine also
I had to return my micro USB plug also ,,, but Nexus sent another
in about a week ... called them for info on how ,,, and they
sent info to email ..
I understand completely, I wish someone would tell me a simpler method than resoldering the port. I'm nowhere inclined to do this myself being as I have no clue how to even begin how to solder anything. I have to use 2 rubber bands, an 8 inch strip of clear duct tape, a bottle of hair gel to add weight, and my microwave to hold it all in place.. =| HELP??????!!!!!!!!!!!!!
I flashed Android N Preview as a secondary ROM using MultiROM, everything worked perfectly, no issues what so ever.
After a day when I was listening to music using Spotify the phone suddenly switched of abruptly with battery over 90%
Since then I couldn't able to switch on the phone again.
No bootloader, no Recovery, Its not booting at all. No response from the phone.
I think it is dead.
Changed the Battery to new one.
Not worked. No sign of anything.
When I plugged in the charger the LED light is on, but I don't think its charging phone is not warm while it is plugged in.
In fact it felt like so chill.
So, I don't know how to recover my phone.
BTW, the phone's bootloader unlocked, rooted stock ROM as the primary one.
Any help would be highly appreciated.
Thanks guys.
Did you try to press the power button for 15-20 seconds? That's a weird problem.
The same happened to me.,and my phone is stock and locked. Its bricked. Nothing we tried helped
Sent from my Nexus 9 using Tapatalk
how do you change the battery on a nexus 6?
kidhudi said:
how do you change the battery on a nexus 6?
Click to expand...
Click to collapse
the back plastic sheet is held on with adhesive, I would apply heat first then work it open with a tool like isesamo or maybe a thin credit card or guitar pick. underneath there are 20 torx iirc can't remember size and another plastic shell with many holes in it. this cover, the wireless charging coil, and battery are adhered together i think and there are two small rubber covers for the power button (top) and battery (bottom). remember to disconnect your ribbon cables and treat them carefully.
the real problem imo lies in reassembly. i have repaired many and never feel they are the same as they came from the factory mostly because the back cover doesn’t re-adhere well. invest in some quality 3m adhesive, even a pre cut if you can manage.
Yeah done everything I have in my power nothing works.
Asked service center to check they said the phone is dead.
To get it repaired it will cost 3500 for me, they said.
Damn it.
Don't know what to do.
Now they said that the motherboard is dead, I need to change it inorder to get it work again.
Is it possible like this kind of problem occurs?
I was in Android N listening to Spotify
Putting a pre release OS on a phone, especially using a hack like multi rom, was indeed a recipe for disaster..
I'm certain that your partitions somehow got corrupted, and that results in a un bootable phone
Hopefully, someone reading this thread, who is thinking about doing something suicidal like that will learn from your mistake, but your phone is toast, unless you can get it J-Tagged, which might not even be available for your N6
I've heard the term j-tag a lot before. What does that mean
mikeprius said:
I've heard the term j-tag a lot before. What does that mean
Click to expand...
Click to collapse
http://www.brickedmyphone.com/products/jtag-unbrick-service/
http://easy-jtag.com/
My phone is officially dead. Service center said that the motherboard is weak and is impossible to repair and only fix is to replace the whole motherboard to a newer one. That would cost me a lot like i could get a new for it and they even suggested me to exchange this phone to a newer one.
And now i got Nexus 6P and I love it so much.
But God i really miss my Nexus 6.
Thanks for the help and suggestion here.
Long live xda.
I couldn't resist to unlock bootloader. Flash multirom and stock root and xposed.
That's the heaven, i can't live without.
I have done it all after i opened the 6P from its box. Lol.
May be i am fastest one to do it.
Thanks xda and friends from it.
Sent from my Nexus 6P using XDA-Developers mobile app