My phone is currently stuck in download mode, I've tried EVERYTHING. Here's the log I get from the KDZ updater.
[R&D Test Tools Log File]
00:27:24 : Launching SW update
00:27:24 : Unpacking KDZ
00:27:27 : KDZ file extraced
00:27:43 : Files were extracted.
00:27:43 : LGMobileDL Load.
00:27:43 : Port = -1
00:27:43 : Connecting to phone
00:27:53 : Check Phone mode = 1
00:28:11 : Phone type check.......
00:28:15 : LGMobileDL.DLL Loading....
00:28:15 : _SetAuthMark Fail
00:28:15 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
00:28:15 : _SetAuthMark Fail
00:28:15 : LoadCDMAPhoneData() Error
00:28:15 : _DetachDLL Call
00:28:15 : _DetachDLL Call End
00:28:15 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V10a-234-XX-JUN-24-2010.dz
00:28:15 : Param : moduleDir =
00:28:15 : Param : waitTime = 0
00:28:15 : Param : UsbHighSpeed = 1
00:28:15 : Param : PhoneMode = 1
00:28:15 : Param : BinVersion = V10A_00
00:28:15 : Param : AuthMark = 0
00:28:15 : Call fn_StartUpgrade
Click to expand...
Click to collapse
After a few more seconds I get param errors.
Try another kdz file
Related
Where is the log:
[R&D Test Tools Log File]
01:31:51 : Launching SW update
01:31:51 : Unpacking KDZ
01:31:59 : KDZ file extraced
01:32:10 : Files were extracted.
01:32:10 : LGMobileDL Load.
01:32:10 : Port = 7
01:32:10 : Connecting to phone
01:32:20 : Check Phone mode = 1
01:32:38 : Phone type check.......
01:32:38 : LGMobileDL.DLL Loading....
01:32:38 : _SetAuthMark Ok : wAuthMark(4649)
01:32:38 : _DetachDLL Call
01:32:38 : _DetachDLL Call End
01:32:38 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20b-CIS-XXX-SEP-20-2010.dz
01:32:38 : Param : moduleDir =
01:32:38 : Param : waitTime = 0
01:32:38 : Param : UsbHighSpeed = 1
01:32:38 : Param : PhoneMode = 1
01:32:38 : Param : BinVersion = V20B_00
01:32:38 : Param : AuthMark = 4649
01:32:38 : Call fn_StartUpgrade
01:33:00 : 3GQCT : wParam = 4, lParam = 0
01:33:00 : Step Complete : DLOAD Change
Click to expand...
Click to collapse
After a while a pop-up window appears and say:
Upgrade Error
WParam: 100
LParam: 6
Click to expand...
Click to collapse
Any help is welcome.
I can't flash my stock firmware. I bricked my phone and I'm trying to flash V10a from philippines. But it stops at 7% saying this
18:02:20 : Call fn_StartUpgrade
18:02:20 : Type = OMAP_IFX
18:02:20 : ********* 2Chip Model.dll input Parameter*************
18:02:20 : MODEL_EVENT : 32769
18:02:20 : PhoneBinaryPath : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V10A.wdb
18:02:20 : ModuleDir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\
18:02:20 : BootWaitTime : 74250
18:02:20 : UsbHighSpeed : FALSE
18:02:20 : PhoneMode : 2
18:02:20 : NewPhoneBinVersion : TCI-TELECOM CONCEPTS INC(PHILPPIN).LGP970.V10A_00
18:02:20 : ClearSI : FALSE
18:02:20 : AuthMark : 0
18:02:21 : ********* 2Chip Model.dll input Parameter End*************
18:02:26 : wParam : 2004, lParam = 7
18:02:26 : Step : TYPE_WPARAM_IFX_DN_POS
18:02:26 : wParam : 2007, lParam = 0
18:02:26 : Step : TYPE_WPARAM_READ_FILES
18:02:26 : wParam : 2010, lParam = 3002
18:02:26 : CleanModelDll() : Free Model.dll
18:02:26 : _DetachDLL Call
18:02:26 : _DetachDLL Call End
18:02:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
18:02:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Anything wrong i've done?
I used to have exactly the same error at the same step. My attempts were always failing at 6 or 7%. It's because I was renaming kdz files. But for you, log shows that it seems okay so... try renaming
Yes, I just renamed the KDZ to V10A_00
may be something error happend when u renamed it. You can redownload it & try again
I have a rogers LGP925 and i followed adixtra's instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1287236
I got my phone from v10c(stock) to v10k(from the link posted in that thread). does this change the baseband? I want to use this phone on carriers that use the 1700 and 2100 bands. The phone originally had: HSDPA 850 / 1900 / 2100. In the above mentioned thread some people said they got it to work with Tmobile's 3G(which i believe uses 1700/2100). does anyone know how to get it working on the 1700 band?
Another thing, when i try to flash v21b (from adixtra's thread) it gives me this error:
17:15:16 : Connection check and IMEI check OK....
17:15:16 : *****Check LGCM Programs Start*****
17:15:16 : LGCM Programs Not Found - OK and ready to upgrade
17:15:18 : *****WorkModelDLL Start*****
17:15:21 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21A.wdb)
17:15:21 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
17:15:21 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dll)
17:15:21 : _DetachDLL Call
17:15:21 : _DetachDLL Call End
17:15:21 : Call fn_StartUpgrade
17:15:21 : ********* 2Chip Model.dll input Parameter*************
17:15:21 : MODEL_EVENT : 32769
17:15:21 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21A.wdb
17:15:21 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
17:15:21 : BootWaitTime : 49500
17:15:21 : UsbHighSpeed : FALSE
17:15:21 : PhoneMode : 1
17:15:21 : NewPhoneBinVersion : V21A_00 (1)
17:15:21 : ClearSI : FALSE
17:15:21 : AuthMark : 0
17:15:21 : ********* 2Chip Model.dll input Parameter End*************
17:15:21 : wParam : 2004, lParam = 5
17:15:22 : Step : TYPE_WPARAM_IFX_DN_POS
17:15:38 : wParam : 2004, lParam = 6
17:16:08 : wParam : 2004, lParam = 7
17:16:09 : wParam : 2007, lParam = 0
17:16:09 : Step : TYPE_WPARAM_READ_FILES
17:16:09 : wParam : 2010, lParam = 3002
17:16:09 : CleanModelDll() : Free Model.dll
17:16:09 : _DetachDLL Call
17:16:09 : _DetachDLL Call End
17:16:09 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:16:09 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
any help would be appreciated.
Do not rename kdz file. I see "V21A_00 (1).kdz"
And delete imei from log
v21b is non rootable atm. Try v21a
Thanks. flashed v21a.kdz, now it shows 2.3.5.
Does the following procedure work in windows 7 sp3?
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
Windows 7 SP3? O_O
I have tried on windows 7 sp1,works
sorry i was thinking about XP and typing Windows 7. I have Windows 7 sp1 but the process isnt working for me.
when i install "LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0" driver it doesnt install the LGSIMODEM01 and 02. and when i plug in my phone it says "USB device not recognized". what am i doing wrong?
to me it was the same and removing the battery fix and then do the following.
Put the battery
power button + volume up
when it detects w7 release power button but keep volume up.
After installing the driver start the installation of KDZ
Hi,
I have tried to root my lg optimus 4x hd phone by following all the instructions I found on xda and elsewhere.
My cell phone carrier is Videotron (canada). I have removed the antivirus app and couldn't see any trace of a screen control app.
The problem appears when I try to launch the system backup test app, it get an error message (it won't launch).
Any help appreciated please,
Thanks
which firmware version do you have ?
try this: http://forum.xda-developers.com/showthread.php?t=1886460
firmware version
Hi tobixdev,
Here is all the info about my phone (firmware/software):
LG-P880g
Android 4.0.3
kernel: 2.6.39.4-00002-g99c972b
build: IML74k
Version: LG-P880g-V10b-sep-05-2012
So I guess the answer to your question is V10b...
Meanwhile, I will try with the link you provided
Thanks for your help!
AW: [Q] Can't root with carrier
Are you brasilian or canadian ?
Sent from my LG-P880 using xda app-developers app
Canadian
Sent from my LG-P880g using xda app-developers app
enriqueriv said:
Canadian
Sent from my LG-P880g using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12
Error message - kdz upgrade
tobixdev said:
http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12
Click to expand...
Click to collapse
Hi tobixdev,
I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001
What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada).
Here is the log file:
[R&D Test Tools Log File]
12:30:30 : Launching SW update
12:30:30 : Unpacking KDZ
12:30:42 : KDZ file extraced
12:30:43 : Files were extracted.
12:30:43 : LGMobileDL Load.
12:30:43 : Port = -1
12:30:43 : Connecting to phone
12:30:56 : Check Phone mode = 2
12:30:56 : Phone type check.......
12:30:58 : LGMobileDL.DLL Loading....
12:30:58 : _SetAuthMark Fail
12:30:58 : _SetAuthMark Ok : wAuthMark(65535)
12:30:58 : _DetachDLL Call
12:30:58 : _DetachDLL Call End
12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz
12:30:58 : Param : moduleDir =
12:30:58 : Param : waitTime = 0
12:30:58 : Param : UsbHighSpeed = 1
12:30:58 : Param : PhoneMode = 2
12:30:58 : Param : BinVersion = V10C_00
12:30:58 : Param : AuthMark = 65535
12:30:58 : Call fn_StartUpgrade
12:31:05 : 3GQCT : wParam = 100, lParam = 5001
12:31:05 : Step : Upgrade Error error code = 5001
12:31:05 : ResetStartInfo() Call
12:31:05 : _DetachDLL Call
12:31:05 : _DetachDLL Call End
12:31:06 : FreeLibrary Call
12:31:06 : FreeLibrary Call End
12:31:06 : ResetStartInfo() Call End
12:31:06 : ===FINISHED===
Thanks again for help and swift response!
enriqueriv said:
Hi tobixdev,
I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001
What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada).
Here is the log file:
[R&D Test Tools Log File]
12:30:30 : Launching SW update
12:30:30 : Unpacking KDZ
12:30:42 : KDZ file extraced
12:30:43 : Files were extracted.
12:30:43 : LGMobileDL Load.
12:30:43 : Port = -1
12:30:43 : Connecting to phone
12:30:56 : Check Phone mode = 2
12:30:56 : Phone type check.......
12:30:58 : LGMobileDL.DLL Loading....
12:30:58 : _SetAuthMark Fail
12:30:58 : _SetAuthMark Ok : wAuthMark(65535)
12:30:58 : _DetachDLL Call
12:30:58 : _DetachDLL Call End
12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz
12:30:58 : Param : moduleDir =
12:30:58 : Param : waitTime = 0
12:30:58 : Param : UsbHighSpeed = 1
12:30:58 : Param : PhoneMode = 2
12:30:58 : Param : BinVersion = V10C_00
12:30:58 : Param : AuthMark = 65535
12:30:58 : Call fn_StartUpgrade
12:31:05 : 3GQCT : wParam = 100, lParam = 5001
12:31:05 : Step : Upgrade Error error code = 5001
12:31:05 : ResetStartInfo() Call
12:31:05 : _DetachDLL Call
12:31:05 : _DetachDLL Call End
12:31:06 : FreeLibrary Call
12:31:06 : FreeLibrary Call End
12:31:06 : ResetStartInfo() Call End
12:31:06 : ===FINISHED===
Thanks again for help and swift response!
Click to expand...
Click to collapse
I will upload my version of the update.
It worked for me every time.
.kdz file you need by your own as it would be to big.
1 way
Run automatic offline procedur.
In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON "
UpTestEX_mod2_marwin run this as admin
select emergency instead of DIAG
select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it)
press on start upgrade.
2 if 1 doesnt work
unplug your phone
exit windows enabler and https server
start windows enabler and https server with admin rights
In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON "
UpTestEX_mod2_marwin run this as admin
select emergency instead of DIAG
select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it)
press on start upgrade.
i hope this works. good luck:good:
Thanks, I will give this a try...
Coming from rooted (aboot, ...) D405n v10d I tried the Resurrection Remix rom. I flashed with CWM, forgot to wipe data and am stuck in a boot loop now. CWM is gone . The only thing that seems to work is the download mode (Hold Vol+ while plugging in), but it says "USER B100 - ROOTED" below the progress bar.
Using the LG Flash Tool 2014 and trying also the original LG Mobile Support Tool I tried to unbrick, but on 4 Different OS (Virtual: XP SP3, Win7 32bit, Win8.1 64bit from modern.ie, Native: Win8.1 64bit) in many tries I always end up with an error after 2% Progress of software upgrade.
I found the logfile created by the LGUserCSTool.exe and the last error is always "TYPE_WPARAM_UPGRADE_ERROR".
Please help, i'm stuck.
Code:
15:41:11 : Start Date : 2015-06-10 15:41:11
15:41:11 : -------- QM_Version mode ---------
15:41:11 : ***** Check Tool Version *****
15:41:11 : Tool version : 1.7.5.0
15:41:11 : UpgradeDLL version : 2.1.5.5
15:41:11 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:41:11 : LGE USB Driver Version :
15:41:11 : Android PDLV Version :
15:41:11 : Android NDLV Version : 3.14.0.0
15:41:11 : ******************************************
15:41:11 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:41:11 : SetEmerModeAT()
15:41:11 : _IsConnectedPhone Call
15:41:22 : _IsConnectedPhone(2)
15:41:22 : 0 - NotConnected.
15:41:22 : 1 - Normal connect success
15:41:22 : 2 - Emergency connect success
15:41:22 : *****CheckOS Start********
15:41:22 : Microsoft_Windows7_Professional_Service Pack 1
15:41:22 : *****CheckPCSyncPrograms Start*****
15:41:23 : PCSyncPrograms Not Found - OK and ready to upgrade
15:41:23 : Überprüfung der Telefonverbindung
15:41:23 : dwWaitResetTime(40000 ms)
15:41:24 : Phone Mode(2)
15:41:24 : *****GetPhoneType Start*****
15:41:24 : Phone Type : CDMA_2CHIP
15:41:24 : *****GetPhoneBinaryVersion Start*****
15:41:24 : Phone Bin Version : D40510D_00
15:41:24 : *****Get ESN / IMEI / MEID Start*****
15:41:24 : ESN/IMEI/MEID : 352763060106678
15:41:26 : Check Backup and Restore model
15:41:26 : Skip Backup and Restore - Emergency mode
15:41:26 : Phone type Compare start
15:41:26 : *****CheckPCSyncPrograms Start*****
15:41:26 : PCSyncPrograms Not Found - OK and ready to upgrade
15:41:27 : ****************CheckAndDownload********************
15:41:27 : Version : D40520A_00
15:41:27 : !!*****OpenURL Start*****!!
15:41:27 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:41:27 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
15:41:27 : ==================LJH log1 ====================
15:41:27 : !!*****OpenURL Start*****!!
15:41:28 : CreateFile : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:41:28 : =============HEADER : Range:bytes=0-=====================
15:41:28 : !!*****OpenURL Start*****!!
15:41:28 : *****DownLoad Start***** (Size:1170880830)
15:47:47 : Receive OK 1170880830/1170880830
15:47:47 : =============TAIL : 1170880830=====================
15:47:47 : Receive Size (1170880830/1170880830)
15:47:47 : *****CheckWebDownError Start*****
15:47:47 : File Error check OK
15:47:51 : ******Extract Start C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz*****
15:47:51 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:47:51 : Check 2G-4G big size kdz file..
15:47:52 : Extract 2G-4G big size kdz file..
15:47:52 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:52 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)
15:47:52 : Extract End C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:47:52 : 01 Skip delete kdz 1.1 file...
15:47:52 : ------------------Model.dll Information-------------------
15:47:52 : Filename : LGUP_8x10_8x26.dll
15:47:52 : Version : 0.2.45.0
15:47:52 : File size : 1595904
15:47:52 : File date : 2015/06/10-15:47:52
15:47:52 : PC Created date: 2015/06/10-15:47:52
15:47:52 : ----------------------------------------------------------
15:47:52 : Skip delete kdz 1.1 or later version file...
15:47:55 : *****Check LGCM Programs Start*****
15:47:55 : LGCM Programs Not Found - OK and ready to upgrade
15:47:55 : m_pLGCyonUpdate status change.
15:47:55 : *****WorkModelDLL Start*****
15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:56 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)
15:47:56 : _DetachDLL Call
15:48:01 : _DetachDLL Call End
15:48:01 : Call fn_StartUpgrade
15:48:01 : ********* 2Chip Model.dll input Parameter*************
15:48:01 : MODEL_EVENT : 32769
15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:48:01 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:48:01 : BootWaitTime : 49500
15:48:01 : UsbHighSpeed : FALSE
15:48:01 : PhoneMode : 2
15:48:01 : NewPhoneBinVersion : D40520A_00
15:48:01 : ClearSI : FALSE
15:48:01 : AuthMark : 0
15:48:01 : ********* 2Chip Model.dll input Parameter End*************
15:48:05 : wParam : 20, lParam = 540
15:48:05 : MODEL DLL Event : (20, 540)
15:48:07 : Model File Count = 540
15:48:07 : wParam : 100, lParam = 51
15:48:07 : MODEL DLL Event : (100, 51)
15:48:07 : Step : TYPE_WPARAM_UPGRADE_ERROR
15:48:07 : CleanModelDll() : Free Model.dll
15:48:07 : _DetachDLL Call
15:48:12 : _DetachDLL Call End
15:48:15 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:48:15 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Hi,
I have exactly the same problem. After a long investigate I understand the cause:
The phone is a LG L90 D405n but I loaded a D410 bootloader, so the LG Flashtool detects the device as a D410 phone so an error occurs when you try to install a D405n kdz.
In your example:
Code:
15:41:24 : *****GetPhoneBinaryVersion Start*****
[COLOR="Red"][B]15:41:24 : Phone Bin Version : D40510D_00[/B][/COLOR]
15:41:27 : ****************CheckAndDownload********************
[COLOR="SeaGreen"]15:41:27 : Version : D40520A_00[/COLOR]
15:47:55 : *****WorkModelDLL Start*****
[COLOR="SeaGreen"]15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)[/COLOR]
15:48:01 : ********* 2Chip Model.dll input Parameter*************
[COLOR="SeaGreen"]15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz[/COLOR]
I loaded a D410 kdz into my D405n phone, the load work using LG Flashtools but the phone turn in a bootloop.
Is there a way to force a kdz load into the phone? Or a way to edit the D405n kdz to let the LG flashtools believe that it's a D410 kdz one?
any solution?