Related
Please see logs below. Can anyone assist me in how to fix this damned error.
17:53:18 : [C:\LGMobileUpgrade] Try to delete folder
17:53:18 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
17:53:18 : Start Date : 2011-12-01 17:53:18
17:53:18 : ---------- QM Testmode ---------
17:53:18 : ***** Check Tool Version *****
17:53:18 : Tool version : 1.5.4.2
17:53:18 : UpgradeDLL version : 1.2.6.5
17:53:18 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
17:53:18 : LGE USB Driver Version :
17:53:18 : Android PDLV Version :
17:53:18 : Android NDLV Version :
17:53:18 : ******************************************
17:53:18 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
17:53:18 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
17:53:18 : SetEmerModeAT()
17:53:18 : _IsConnectedPhone Call
17:53:34 : _IsConnectedPhone(1)
17:53:34 : 0 - NotConnected.
17:53:34 : 1 - Normal connect success
17:53:34 : 2 - Emergency connect success
17:53:44 : _IsConnectedPhone Call for SmartPhone
17:53:46 : _IsConnectedPhone(0)
17:53:46 : 0 - NotConnected.
17:53:46 : 1 - Normal connect success
17:53:46 : 2 - Emergency connect success
17:53:46 : *****CheckOS Start********
17:53:46 : Microsoft_Windows7_Professional_Service Pack 1
17:53:46 : *****CheckPCSyncPrograms Start*****
17:53:47 : PCSyncPrograms Not Found - OK and ready to upgrade
17:53:47 : Checking the connection with the cell phone...
17:53:47 : dwWaitResetTime(40000 ms)
17:53:48 : _IsConnectedPhone Call
17:54:03 : _IsConnectedPhone(1)
17:54:03 : 0 - NotConnected.
17:54:03 : 1 - Normal connect success
17:54:03 : 2 - Emergency connect success
17:54:03 : Phone Mode(1)
17:54:03 : *****GetPhoneType Start*****
17:54:16 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
17:54:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
17:54:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:54:16 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
17:54:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
I am really sorry people. I found out that I needed to start in recovery and wipe total system data.
Hello,
I have an LG Marquee (seems to Sprint rebranded version of LG Optimus Black). I wanted to reflash my phone back to stock firmware, and there didn't seem to be a good set of directions out there.
Here's what worked for me on Windows 7 Pro:
Downloaded KDZ firmware from this site:
http://www.lg-phones.org/lg-marquee-firmware-download.html
link to: http://www.mediafire.com/?vwruw489w3u9980
Used flashing steps here:
http://forum.xda-developers.com/showthread.php?t=875881
I selected type: 3GQCT - SmartPhone(WM)
Warning: Installing the firmware at your own risk. I’m not responsible for any damage or brick. I don’t recommend you try this. However, if you insist on doing so, backup your phone first.
Re-rooting via these steps:
http://www.lg-phones.org/how-to-root-sprint-lg-marquee.html
Updated 1/28/12 to add new link to KDZ file: http://www.mediafire.com/?vwruw489w3u9980
What state was your phone in? Mine is stuck showing the box with an arrow sticking out of it. I've tried this method with the phone in this state, off, as well as vol +, camera, power to get into "download" mode. None seem to push the fw to the phone.
Any ideas?
A couple of sites suggest trying to boot into recovery mode (volume down+power)
"Hold the Volume Down and Power Button until the soft keys start to flash, then release and you should boot into a recovery mode."
http://forums.androidcentral.com/sprint-lg-marquee/125293-lg-marquee-has-cwm-recovery.html
Another site about doing a factory reset:
http://www.hard-reset.com/lg-marquee-ls855-hard-reset.html
There's also some unbricking tips from here, I wonder if you can use similar steps using the KDZ file for the LG Marquee.
http://forum.xda-developers.com/showthread.php?t=1180331
Are you able to get an adb shell?
Thanks for the quick response. Unfortunately, no joy so far. Windows 7 Pro too.
Volume down and power show the box with the arrow. Factory reset results in the same thing. The only thing that I think works is camera + volume up and power when connected to usb. It goes into a "Software download" mode. Unfortunately I can't figure out how to push the firmware to it. KDZ stops at 4% with no "spam" in the log.
I'm not familiar with adb, but I tried it anyways. It shows no devices found.
Seems like the R&D tool is the furthest that I've gotten. I place the phone into "Download" mode but the tool stops at 4%. Any ideas?
Code:
23:12:15 : [C:\LGMobileUpgrade] Try to delete folder
23:12:15 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:12:15 : Start Date : 2011-12-28 23:12:15
23:12:15 : ---------- QM CSE Testmode ---------
23:12:15 : ---------- CSE mode ---------
23:12:15 : ***** Check Tool Version *****
23:12:15 : Tool version : 1.5.4.6
23:12:15 : UpgradeDLL version : 1.2.6.6
23:12:15 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
23:12:15 : LGE USB Driver Version :
23:12:15 : Android PDLV Version :
23:12:15 : Android NDLV Version : 3.6
23:12:15 : ******************************************
23:12:15 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
23:12:15 : SetEmerModeAT()
23:12:15 : *****CheckOS Start********
23:12:15 : Microsoft_Windows_XP_Professional_Service Pack 2
23:12:15 : *****CheckPCSyncPrograms Start*****
23:12:16 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:16 : Checking the connection with the cell phone...
23:12:16 : dwWaitResetTime(40000 ms)
23:12:17 : _IsConnectedPhone Call
23:12:40 : _IsConnectedPhone(2)
23:12:40 : 0 - NotConnected.
23:12:40 : 1 - Normal connect success
23:12:40 : 2 - Emergency connect success
23:12:40 : Phone Mode(2)
23:12:41 : *****CheckPCSyncPrograms Start*****
23:12:42 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:43 : ****************CheckAndDownload********************
23:12:43 : ******Extract Start C:\Documents and Settings\User\Desktop\LG\P60680.kdz*****
23:12:43 : Model Dll Dir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:43 : File Size = 179521390
23:12:47 : Extract kdz file Success.
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb\n
23:12:50 : WDB(or DZ) FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll\n
23:12:50 : Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdh\n
23:12:50 : NNNNN WDB FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : NNNNN Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:50 : Extract End C:\Documents and Settings\User\Desktop\LG\P60680.cab
23:12:50 : ------------------Model.dll Information-------------------
23:12:50 : Filename : LS855_WD_1_0_7_0.dll
23:12:50 : Version : 1.0.7.0
23:12:50 : File size : 495733
23:12:50 : File date : 2011/08/04-16:51:36
23:12:50 : PC Created date: 2011/12/28-23:12:50
23:12:50 : ----------------------------------------------------------
23:12:50 : *****Check LGCM Programs Start*****
23:12:50 : LGCM Programs Not Found - OK and ready to upgrade
23:12:51 : *****WorkModelDLL Start*****
23:12:52 : strPhoneBinaryPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:52 : strModuleDir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:52 : strModelDLLPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:52 : _DetachDLL Call
23:12:52 : _DetachDLL Call End
23:12:52 : Call fn_StartUpgrade
23:12:52 : Phone mode change -> CSE
23:12:52 : ********* CDMA Model.dll input Parameter *************
23:12:52 : MODEL_EVENT : 32769
23:12:52 : PhoneBinaryPath : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb
23:12:52 : ModuleDir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\
23:12:52 : BootWaitTime : 49500
23:12:52 : UsbHighSpeed : FALSE
23:12:52 : PhoneMode : 4
23:12:52 : NewPhoneBinVersion : P60680
23:12:52 : ClearSI : FALSE
23:12:52 : AuthMark : 0
23:12:52 : ********* CDMA Model.dll input Parameter End*************
ovel2clock said:
Seems like the R&D tool is the furthest that I've gotten. I place the phone into "Download" mode but the tool stops at 4%. Any ideas?
Code:
23:12:15 : [C:\LGMobileUpgrade] Try to delete folder
23:12:15 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:12:15 : Start Date : 2011-12-28 23:12:15
23:12:15 : ---------- QM CSE Testmode ---------
23:12:15 : ---------- CSE mode ---------
23:12:15 : ***** Check Tool Version *****
23:12:15 : Tool version : 1.5.4.6
23:12:15 : UpgradeDLL version : 1.2.6.6
23:12:15 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
23:12:15 : LGE USB Driver Version :
23:12:15 : Android PDLV Version :
23:12:15 : Android NDLV Version : 3.6
23:12:15 : ******************************************
23:12:15 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
23:12:15 : SetEmerModeAT()
23:12:15 : *****CheckOS Start********
23:12:15 : Microsoft_Windows_XP_Professional_Service Pack 2
23:12:15 : *****CheckPCSyncPrograms Start*****
23:12:16 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:16 : Checking the connection with the cell phone...
23:12:16 : dwWaitResetTime(40000 ms)
23:12:17 : _IsConnectedPhone Call
23:12:40 : _IsConnectedPhone(2)
23:12:40 : 0 - NotConnected.
23:12:40 : 1 - Normal connect success
23:12:40 : 2 - Emergency connect success
23:12:40 : Phone Mode(2)
23:12:41 : *****CheckPCSyncPrograms Start*****
23:12:42 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:43 : ****************CheckAndDownload********************
23:12:43 : ******Extract Start C:\Documents and Settings\User\Desktop\LG\P60680.kdz*****
23:12:43 : Model Dll Dir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:43 : File Size = 179521390
23:12:47 : Extract kdz file Success.
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb\n
23:12:50 : WDB(or DZ) FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll\n
23:12:50 : Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdh\n
23:12:50 : NNNNN WDB FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : NNNNN Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:50 : Extract End C:\Documents and Settings\User\Desktop\LG\P60680.cab
23:12:50 : ------------------Model.dll Information-------------------
23:12:50 : Filename : LS855_WD_1_0_7_0.dll
23:12:50 : Version : 1.0.7.0
23:12:50 : File size : 495733
23:12:50 : File date : 2011/08/04-16:51:36
23:12:50 : PC Created date: 2011/12/28-23:12:50
23:12:50 : ----------------------------------------------------------
23:12:50 : *****Check LGCM Programs Start*****
23:12:50 : LGCM Programs Not Found - OK and ready to upgrade
23:12:51 : *****WorkModelDLL Start*****
23:12:52 : strPhoneBinaryPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:52 : strModuleDir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:52 : strModelDLLPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:52 : _DetachDLL Call
23:12:52 : _DetachDLL Call End
23:12:52 : Call fn_StartUpgrade
23:12:52 : Phone mode change -> CSE
23:12:52 : ********* CDMA Model.dll input Parameter *************
23:12:52 : MODEL_EVENT : 32769
23:12:52 : PhoneBinaryPath : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb
23:12:52 : ModuleDir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\
23:12:52 : BootWaitTime : 49500
23:12:52 : UsbHighSpeed : FALSE
23:12:52 : PhoneMode : 4
23:12:52 : NewPhoneBinVersion : P60680
23:12:52 : ClearSI : FALSE
23:12:52 : AuthMark : 0
23:12:52 : ********* CDMA Model.dll input Parameter End*************
Click to expand...
Click to collapse
rename file from P60680.kdz to V20A_00.kdz
Still no luck. Hangs at 4%. FYI, I'm on Sprint.
Should I be in the "download" mode or just off?
Appreciate all the help so far!
As far as I rembember, is it nomal, that it gets stuck at 4%... It keeps on uploading, you just need to wait long enough, but u can find information on that somewhere here in the forum. Maybe just wait for half an hour or so, maybe u even see ur phone rebooting, dont exactly remember...
And download mode is fine i guess
Yikes, sounds frustrating.
I found some tips here:
[HOWTO] Rooting, Installing - Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
and
[HOWTO] Phone not responding at all - last chance to repair
http://forum.xda-developers.com/showthread.php?t=883314
Let us know if they work
Unfortunately, no matter what combination of buttons/computers/OS's I tried I still couldn't get it to push the firmware to the device. Wound up bringing it into the Sprint store and getting it replaced.
Thanks to everyone who offered up their help. Hopefully once Boost Mobile gets the Marquee there will be more attention on this phone.
Note to anyone who roots, don't uninstall applications via Titanium Backup.
These directions worked great for me. I had to do a factory reset afterwards and all the Sprint apps (that I had removed with TI) came back.
any chance somone can repost the kdz file for the marquee. unfortunately as we all know the megaupload link no longer workie. thanks fellas
Uploaded KDZ to mediafire, updated original post with this URL to download it:
http://www.mediafire.com/?vwruw489w3u9980
Had to do this twice already for deleting stock apps with TI.
Im done with trying to remove the bloat apps.
I've been trying this method to restore a Marquee stuck in a boot loop. Unfortunately, I can't get the phone to do anything past getting in software download mode. I plug in the phone, it gets recognized as a modem by Windows (a good sign) and then it immediately disconnects and the computer no longer recognizes the phone. Any ideas?
LG Marquee to look like LG Optimus Black
I have a Sprint LG Marquee but I would like for it to have the look and feel of the LG Optimus Black. I know absolutely nothing about ROMS or Rooting or Flashing. I just know that I would really like if my phone had the layout of the LG Optimus Black. Any suggestions on how I could potentially make this possible?
I haven't seen much love for the LG Marquee on this board. I recommend going here : http://androidforums.com/marquee-all-things-root/
guys pls help,,i cant update to v20l because of this error keeps showing up,halting the update process
11:49:41 : [C:\LGMobileUpgrade] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:49:41 : Start Date : 2011-12-06 11:49:41
11:49:41 : ---------- QM Testmode ---------
11:49:41 : ***** Check Tool Version *****
11:49:41 : Tool version : 1.5.4.4
11:49:41 : UpgradeDLL version : 1.2.6.5
11:49:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:49:41 : LGE USB Driver Version :
11:49:41 : Android PDLV Version :
11:49:41 : Android NDLV Version :
11:49:41 : ******************************************
11:49:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:49:41 : SetEmerModeAT()
11:49:41 : _IsConnectedPhone Call
11:49:54 : _IsConnectedPhone(1)
11:49:54 : 0 - NotConnected.
11:49:54 : 1 - Normal connect success
11:49:54 : 2 - Emergency connect success
11:50:02 : _IsConnectedPhone Call for SmartPhone
11:50:05 : _IsConnectedPhone(0)
11:50:05 : 0 - NotConnected.
11:50:05 : 1 - Normal connect success
11:50:05 : 2 - Emergency connect success
11:50:05 : *****CheckOS Start********
11:50:05 : Microsoft_Windows7_Professional_
11:50:05 : *****CheckPCSyncPrograms Start*****
11:50:06 : PCSyncPrograms Not Found - OK and ready to upgrade
11:50:06 : Checking the connection with the cell phone...
11:50:06 : dwWaitResetTime(40000 ms)
11:50:07 : _IsConnectedPhone Call
11:50:20 : _IsConnectedPhone(1)
11:50:20 : 0 - NotConnected.
11:50:20 : 1 - Normal connect success
11:50:20 : 2 - Emergency connect success
11:50:20 : Phone Mode(1)
11:50:20 : *****GetPhoneType Start*****
11:50:31 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
11:50:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:50:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:50:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:50:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
qwyncy said:
guys pls help,,i cant update to v20l because of this error keeps showing up,halting the update process
11:49:41 : [C:\LGMobileUpgrade] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:49:41 : Start Date : 2011-12-06 11:49:41
11:49:41 : ---------- QM Testmode ---------
11:49:41 : ***** Check Tool Version *****
11:49:41 : Tool version : 1.5.4.4
11:49:41 : UpgradeDLL version : 1.2.6.5
11:49:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:49:41 : LGE USB Driver Version :
11:49:41 : Android PDLV Version :
11:49:41 : Android NDLV Version :
11:49:41 : ******************************************
11:49:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:49:41 : SetEmerModeAT()
11:49:41 : _IsConnectedPhone Call
11:49:54 : _IsConnectedPhone(1)
11:49:54 : 0 - NotConnected.
11:49:54 : 1 - Normal connect success
11:49:54 : 2 - Emergency connect success
11:50:02 : _IsConnectedPhone Call for SmartPhone
11:50:05 : _IsConnectedPhone(0)
11:50:05 : 0 - NotConnected.
11:50:05 : 1 - Normal connect success
11:50:05 : 2 - Emergency connect success
11:50:05 : *****CheckOS Start********
11:50:05 : Microsoft_Windows7_Professional_
11:50:05 : *****CheckPCSyncPrograms Start*****
11:50:06 : PCSyncPrograms Not Found - OK and ready to upgrade
11:50:06 : Checking the connection with the cell phone...
11:50:06 : dwWaitResetTime(40000 ms)
11:50:07 : _IsConnectedPhone Call
11:50:20 : _IsConnectedPhone(1)
11:50:20 : 0 - NotConnected.
11:50:20 : 1 - Normal connect success
11:50:20 : 2 - Emergency connect success
11:50:20 : Phone Mode(1)
11:50:20 : *****GetPhoneType Start*****
11:50:31 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
11:50:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:50:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:50:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:50:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
How did you solved it ? I'm trying to update my LG970 to V20N trough kdz and I'm getting the same error:
21:49:27 : *****GetPhoneType Start*****
21:49:36 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
21:49:36 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
21:49:36 : Page_Error ºÎºÐÀÔ´Ï´Ù
21:49:36 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
21:49:36 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
so how did you solved it?
Soooooo, how'd ya do it? I'm stuck as well.
After flashing CM7 nightly and moving back to stock I can flash stock rom only once
What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off
So i can flash to stock say 10c coming from CM7 nightly
butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom
Dont know what im missing maybe any help would be appreciated thanks
So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue.
And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc.
A better description of the steps you do when you encounter the issue will bring you a better answer.
Regards,
Me
Have you tried factory resetting it?
Laier94 said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Cleared cache dalvick reset data done everything
It never used to do this will try and get copy of log when trying to flash 2nd time
Just aswell this is my 2nd phone
here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before
12:06:37 : [C:\LGMobileUpgrade] Try to delete folder
12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
12:06:37 : Start Date : 2011-12-21 12:06:37
12:06:37 : ---------- QM CSE Testmode ---------
12:06:37 : ---------- CSE mode ---------
12:06:37 : ***** Check Tool Version *****
12:06:37 : Tool version : 1.5.4.4
12:06:37 : UpgradeDLL version : 1.2.6.5
12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
12:06:37 : LGE USB Driver Version : 4.9.7.0
12:06:37 : Android PDLV Version : 2.2
12:06:37 : Android NDLV Version :
12:06:37 : ******************************************
12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
12:06:37 : SetEmerModeAT()
12:06:37 : *****CheckOS Start********
12:06:37 : Microsoft_Windows7_Professional_
12:06:37 : *****CheckPCSyncPrograms Start*****
12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade
12:06:38 : Checking the connection with the cell phone...
12:06:38 : dwWaitResetTime(40000 ms)
12:06:39 : _IsConnectedPhone Call
12:07:00 : _IsConnectedPhone(2)
12:07:00 : 0 - NotConnected.
12:07:00 : 1 - Normal connect success
12:07:00 : 2 - Emergency connect success
12:07:00 : Phone Mode(2)
12:07:01 : *****CheckPCSyncPrograms Start*****
12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade
12:07:03 : ****************CheckAndDownload********************
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz*****
12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:03 : File Size = 240079641
12:07:05 : Extract kdz file Success.
12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n
12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb)
12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll)
12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab
12:07:07 : ------------------Model.dll Information-------------------
12:07:07 : Filename : LGP970.dll
12:07:07 : Version : 1.0.0.2
12:07:07 : File size : 262144
12:07:07 : File date : 2011/04/05-23:43:32
12:07:07 : PC Created date: 2011/12/21-12:07:06
12:07:07 : ----------------------------------------------------------
12:07:07 : *****Check LGCM Programs Start*****
12:07:07 : LGCM Programs Not Found - OK and ready to upgrade
12:07:08 : *****WorkModelDLL Start*****
12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:10 : _DetachDLL Call
12:07:10 : _DetachDLL Call End
12:07:10 : Call fn_StartUpgrade
12:07:10 : Phone mode change -> CSE
12:07:10 : ********* CDMA Model.dll input Parameter *************
12:07:10 : MODEL_EVENT : 32769
12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb
12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
12:07:10 : BootWaitTime : 49500
12:07:10 : UsbHighSpeed : FALSE
12:07:10 : PhoneMode : 4
12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00
12:07:10 : ClearSI : FALSE
12:07:10 : AuthMark : 0
12:07:10 : ********* CDMA Model.dll input Parameter End*************
12:07:15 : wParam : 2004, lParam = 7
12:07:15 : MODEL DLL Event : (2004, 7)
12:07:16 : Model Dll Msg Not Found(2004, 7)
12:07:16 : wParam : 2007, lParam = 0
12:07:16 : MODEL DLL Event : (2007, 0)
12:07:17 : Model Dll Msg Not Found(2007, 0)
12:07:17 : wParam : 2010, lParam = 3002
12:07:17 : MODEL DLL Event : (2010, 3002)
12:07:17 : Model Dll Msg Not Found(2010, 3002)
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
JasonQMe said:
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
Click to expand...
Click to collapse
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
maniAK- said:
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
Click to expand...
Click to collapse
So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?
Keep only "V10E_00.kdz" as firmware name.
Sent from my LG-P970
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz*****
Click to expand...
Click to collapse
rgabi is right
Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out
I have the ghost call bug on LG Thrill ICS, and I read flashing back to froyo will fix it. That would be great if I could flash back to froyo. I found out I am no longer able to flash my phone with LG Flash Tools (in the LG Update Package), the official up to date LG Mobile Update program, and with the LG Flash tool (which flashes .bin and .fls files).
The symptoms of not working are:
Lg Flash Tools: The updater fails on 5% because of Page_Error ºÎºÐÀÔ´Ï´Ù.
I suspect this doesn't work because I have a custom bootloader from the All-In-One Package that shows the Silver LG Fastboot Logo instead of the standard red logo. I have already tried using the recover update trick used to solve the page error I read in a different post. This leads into the next symptom.
LG Mobile Update: This freezes on 4% and has no log of why it won't work. I can only perform the recover phone mode as the tool now recognizes I have updated the phone (which it only recognized that it is up to date after I flashed the custom bootloader).
LG Flash Tool: This tool as the others used to flash but it now just counts the time and doesn't increase the flash percentage at all. I have tried both the P920 and the P925 dll and they both have the same result.
The flashing methods described above don't make any visible changes to my phone (or any changes at all). I have tried wiping the x-loader and the u-boot via fastboot to find I can't boot into s/w mode without reflashing those back. I have not tried wiping the whole phone because I am tired of bricking my phone over and over and I don't have the files in fastboot ready format to flash back anyway. I couldn't figure out how to back up my whole phone via fastboot (and I can't go around this problem for the baseband because their is no radio partition).
I have Googled and messed with my phone a week and since I am desperate to fix this ghost call bug I decided to not wait any longer before asking for help. Can someone please help me fix my flashing problem so I can go to froyo to fix the ghost call bug. I have froyo in kdz format and in .bin/.fls formats (baseband and .bin). I used both the s/w and the lg software option of starting an update for flashing. I remembered I forgot to tell you I also tried resetting the tools on the computer and followed the instructions to the letter to get rid of any configuration problems that may have occurred.
I will press the thanks button for the first of those who help me solve my dilemma, even if I have to pull the solution from multiple answerers.
Bonus: As an extra bonus, what can I do to write directly to and read directly from the phone's flash chip so when I get my upgrade in March, I can retire my phone to OS development.
The log from the LG Flash Tools is:
15:58:00 : [C:\LGMobileUpgrade] Try to delete folder
15:58:00 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
15:58:00 : Start Date : 2013-11-11 15:58:00
15:58:00 : ---------- QM Testmode ---------
15:58:00 : ***** Check Tool Version *****
15:58:00 : Tool version : 1.5.4.8
15:58:00 : UpgradeDLL version : 1.2.6.7
15:58:00 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:58:00 : LGE USB Driver Version :
15:58:00 : Android PDLV Version :
15:58:00 : Android NDLV Version :
15:58:00 : ******************************************
15:58:00 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:58:00 : SetEmerModeAT()
15:58:00 : _IsConnectedPhone Call
15:58:22 : _IsConnectedPhone(2)
15:58:22 : 0 - NotConnected.
15:58:22 : 1 - Normal connect success
15:58:22 : 2 - Emergency connect success
15:58:22 : *****CheckOS Start********
15:58:22 : Microsoft_Windows_XP_Home Edition_Service Pack 3
15:58:22 : *****CheckPCSyncPrograms Start*****
15:58:22 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:22 : Checking the connection with the cell phone...
15:58:22 : dwWaitResetTime(40000 ms)
15:58:23 : Phone Mode(2)
15:58:23 : *****GetPhoneType Start*****
15:58:23 : Phone Type : OMAP_IFX
15:58:23 : *****GetPhoneBinaryVersion Start*****
15:58:23 : *****Get ESN / IMEI / MEID Start*****
15:58:23 : ESN/IMEI/MEID : -----------------------------
15:58:23 : Phone type Compare start
15:58:23 : *****CheckPCSyncPrograms Start*****
15:58:24 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:25 : ****************CheckAndDownload********************
15:58:25 : ******Extract Start C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.kdz*****
15:58:25 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:25 : File Size = 186843008
15:58:27 : Extract kdz file Success.
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb\n
15:58:28 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb)
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll\n
15:58:28 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll)
15:58:28 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:28 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:28 : Extract End C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.cab
15:58:28 : ------------------Model.dll Information-------------------
15:58:28 : Filename : Star_Model.dll
15:58:28 : Version : 1.0.0.1
15:58:28 : File size : 307200
15:58:28 : File date : 2011/02/28-20:17:28
15:58:28 : PC Created date: 2013/11/11-15:58:28
15:58:28 : ----------------------------------------------------------
15:58:28 : *****Check LGCM Programs Start*****
15:58:28 : LGCM Programs Not Found - OK and ready to upgrade
15:58:28 : *****WorkModelDLL Start*****
15:58:29 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:29 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:29 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:29 : _DetachDLL Call
15:58:29 : _DetachDLL Call End
15:58:30 : Call fn_StartUpgrade
15:58:30 : ********* 2Chip Model.dll input Parameter*************
15:58:30 : MODEL_EVENT : 32769
15:58:30 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
15:58:30 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:58:30 : BootWaitTime : 49500
15:58:30 : UsbHighSpeed : FALSE
15:58:30 : PhoneMode : 2
15:58:30 : NewPhoneBinVersion : V21E_00
15:58:30 : ClearSI : FALSE15:58:48 : wParam : 2007, lParam = 0
15:58:49 : Step : TYPE_WPARAM_READ_FILES
15:58:49 : wParam : 2008, lParam = 8
15:58:49 : Step : TYPE_WPARAM_TOTAL_FILES
15:58:49 : wParam : 2005, lParam = 0
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2003, lParam = 16
15:58:49 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
15:58:49 : wParam : 2005, lParam = 1
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2009, lParam = 1
15:58:50 : Step : TYPE_WPARAM_CURRENT_FILE
15:58:50 : wParam : 2005, lParam = 5
15:58:50 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:30 : AuthMark : 0
15:58:30 : ********* 2Chip Model.dll input Parameter End*************
15:59:23 : wParam : 2010, lParam = 3015
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:00:44 : Call Retry Thread16:01:27 : _IsConnectedPhone(2)
16:01:27 : 0 - NotConnected.
16:01:27 : 1 - Normal connect success
16:01:27 : 2 - Emergency connect success
16:01:27 : Phone Mode(2)
16:01:27 : *****WorkModelDLL Start*****
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
16:01:28 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:01:28 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : Call fn_StartUpgrade
16:01:28 : ********* 2Chip Model.dll input Parameter*************
16:01:28 : MODEL_EVENT : 32769
16:01:28 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
16:01:28 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:01:28 : BootWaitTime : 74250
16:01:28 : UsbHighSpeed : FALSE
16:01:28 : PhoneMode : 2
16:01:28 : NewPhoneBinVersion : V21E_00
16:01:28 : ClearSI : FALSE
16:01:28 : AuthMark : 0
16:01:28 : ********* 2Chip Model.dll input Parameter End*************
16:01:45 : wParam : 2007, lParam = 0
16:01:45 : Step : TYPE_WPARAM_READ_FILES
16:01:45 : wParam : 2008, lParam = 8
16:01:45 : Step : TYPE_WPARAM_TOTAL_FILES
16:01:45 : wParam : 2005, lParam = 0
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2003, lParam = 16
16:01:45 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
16:01:45 : wParam : 2005, lParam = 1
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2009, lParam = 1
16:01:45 : Step : TYPE_WPARAM_CURRENT_FILE
16:01:45 : wParam : 2005, lParam = 5
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:02:18 : wParam : 2010, lParam = 3015
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : Page_DeepError()- 8
16:02:18 : [011,700,147,062,092]Problem with communication between cell phone and PC\n\n[009,400,102,102,102]To restart from the beginning, disconnect and connect the USB cable and battery, \nthen power on your cell phone and try according to instructions. This will \nnormally complete update.If not, please visit the LG Service Center.
16:02:18 : *********** End of Page_DeepError() *********
16:03:30 : =======Cancel button click : m_nStep(10)
16:00:44 : Checking the connection with the cell phone...
16:00:44 : Checking the connection with the cell phone...
16:00:44 : dwWaitResetTime(40000 ms)
16:00:48 : _IsConnectedPhone Call
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Title Question Solved
drastic00 said:
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Click to expand...
Click to collapse
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
The baseband I tried is not the correct one
Brandon Gomez said:
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
Click to expand...
Click to collapse
The baseband I mentioned flashing in this post is not the one I am looking for because I have the ghost call problems again. I have created a list of basebands not to use for this purpose and (hopefully) later on I will specify which one does work.
Basebands to not use:
http://d-h.st/dxl
Basebands to use:
Unknown
What is the baseband for:
Frequencies | Carrier | Networks (4G, 3G, Edge, etc...), Phone | Phone Model Number | Android Type (ICS, Jellybean, Gingerbread), Android Version (v30b) | Baseband Version | Country Made For (or at least where it works well)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
? | AT&T | 4G, 3G, Edge, Cell | LG Thrill | P925 | OMAP4430/XMM6260 | ICS | v30b | ?
I added this chart because this is the kind of data baseband hunters are looking for. I hope someone uses this to create a thread to elaborate on this. Download links are optional on the chart.
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
The baseband is from the large partition of v28.
drastic00 said:
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
Click to expand...
Click to collapse
The baseband I used came from the thread you linked, but it appears to be the same baseband I originally had. I used the large partition link so I will try others from the thread.
P925G baseband file is here
http://www.mediafire.com/?dmr7ra90dv3t8t4
It should work ok with v30B. This is the one I use with his v30C ROM...
What to do?
My phone still has ghost call, but maybe it is because of the dead zone the at&t coverage map shows. I know the ghost call exists because I checked the symptoms and my phone wasn't reliable when I was traveling. I am going to test out froyo now that I can flash again, but if that doesn't work, then it is because of the dead zone.
I won't flash froyo tonight because I will need my phone tomorrow, and according to the coverage map I should have hardly any signal even though I have not tested it with another person's phone yet. I will work on it this weekend.
More Edits:
I just flashed the gingerbread from the LG Optimus 3D, as I could only find this and that is because I already had it (I don't remember why). It had the same issues as ICS about the cell signal even though it is a little bit better, so it is probably the area I live in (however it used to work and my phone is the only phone affected).
I tested the phone this weekend and it now picks up signal very well even though it didn't before. It just isn't as powerful as other phones in the same area so if this is a hardware issue, the question is solved, but if this is a software issue, then anyone who knows why it doesn't pick up signal as well and/or can solve this issue please post why or how this happens or to fix it.
I decided to mark this thread as solved even though I determined this as a software issue, since I decided I no longer care as long as I have sufficient signal. By March I can retire this phone to OS development and see if I can bring some new life to it. I expect to see myself making new threads about the structure of the phone drive and kdz making along at xda as well as learning arm processor assembly (with the x86 bit assembly I am currently learning) on osdev.org around that time of year.