[Solved] [Q] (All flash methods fail) Unable to Reflash LG Thrill - LG Thrill 4G
I have the ghost call bug on LG Thrill ICS, and I read flashing back to froyo will fix it. That would be great if I could flash back to froyo. I found out I am no longer able to flash my phone with LG Flash Tools (in the LG Update Package), the official up to date LG Mobile Update program, and with the LG Flash tool (which flashes .bin and .fls files).
The symptoms of not working are:
Lg Flash Tools: The updater fails on 5% because of Page_Error ºÎºÐÀÔ´Ï´Ù.
I suspect this doesn't work because I have a custom bootloader from the All-In-One Package that shows the Silver LG Fastboot Logo instead of the standard red logo. I have already tried using the recover update trick used to solve the page error I read in a different post. This leads into the next symptom.
LG Mobile Update: This freezes on 4% and has no log of why it won't work. I can only perform the recover phone mode as the tool now recognizes I have updated the phone (which it only recognized that it is up to date after I flashed the custom bootloader).
LG Flash Tool: This tool as the others used to flash but it now just counts the time and doesn't increase the flash percentage at all. I have tried both the P920 and the P925 dll and they both have the same result.
The flashing methods described above don't make any visible changes to my phone (or any changes at all). I have tried wiping the x-loader and the u-boot via fastboot to find I can't boot into s/w mode without reflashing those back. I have not tried wiping the whole phone because I am tired of bricking my phone over and over and I don't have the files in fastboot ready format to flash back anyway. I couldn't figure out how to back up my whole phone via fastboot (and I can't go around this problem for the baseband because their is no radio partition).
I have Googled and messed with my phone a week and since I am desperate to fix this ghost call bug I decided to not wait any longer before asking for help. Can someone please help me fix my flashing problem so I can go to froyo to fix the ghost call bug. I have froyo in kdz format and in .bin/.fls formats (baseband and .bin). I used both the s/w and the lg software option of starting an update for flashing. I remembered I forgot to tell you I also tried resetting the tools on the computer and followed the instructions to the letter to get rid of any configuration problems that may have occurred.
I will press the thanks button for the first of those who help me solve my dilemma, even if I have to pull the solution from multiple answerers.
Bonus: As an extra bonus, what can I do to write directly to and read directly from the phone's flash chip so when I get my upgrade in March, I can retire my phone to OS development.
The log from the LG Flash Tools is:
15:58:00 : [C:\LGMobileUpgrade] Try to delete folder
15:58:00 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
15:58:00 : Start Date : 2013-11-11 15:58:00
15:58:00 : ---------- QM Testmode ---------
15:58:00 : ***** Check Tool Version *****
15:58:00 : Tool version : 1.5.4.8
15:58:00 : UpgradeDLL version : 1.2.6.7
15:58:00 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:58:00 : LGE USB Driver Version :
15:58:00 : Android PDLV Version :
15:58:00 : Android NDLV Version :
15:58:00 : ******************************************
15:58:00 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:58:00 : SetEmerModeAT()
15:58:00 : _IsConnectedPhone Call
15:58:22 : _IsConnectedPhone(2)
15:58:22 : 0 - NotConnected.
15:58:22 : 1 - Normal connect success
15:58:22 : 2 - Emergency connect success
15:58:22 : *****CheckOS Start********
15:58:22 : Microsoft_Windows_XP_Home Edition_Service Pack 3
15:58:22 : *****CheckPCSyncPrograms Start*****
15:58:22 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:22 : Checking the connection with the cell phone...
15:58:22 : dwWaitResetTime(40000 ms)
15:58:23 : Phone Mode(2)
15:58:23 : *****GetPhoneType Start*****
15:58:23 : Phone Type : OMAP_IFX
15:58:23 : *****GetPhoneBinaryVersion Start*****
15:58:23 : *****Get ESN / IMEI / MEID Start*****
15:58:23 : ESN/IMEI/MEID : -----------------------------
15:58:23 : Phone type Compare start
15:58:23 : *****CheckPCSyncPrograms Start*****
15:58:24 : PCSyncPrograms Not Found - OK and ready to upgrade
15:58:25 : ****************CheckAndDownload********************
15:58:25 : ******Extract Start C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.kdz*****
15:58:25 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:25 : File Size = 186843008
15:58:27 : Extract kdz file Success.
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb\n
15:58:28 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb)
15:58:28 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll\n
15:58:28 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\Star_Model.dll)
15:58:28 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:28 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:28 : Extract End C:\Users\Brandon Gomez\Desktop\Downloads\V21E_00.cab
15:58:28 : ------------------Model.dll Information-------------------
15:58:28 : Filename : Star_Model.dll
15:58:28 : Version : 1.0.0.1
15:58:28 : File size : 307200
15:58:28 : File date : 2011/02/28-20:17:28
15:58:28 : PC Created date: 2013/11/11-15:58:28
15:58:28 : ----------------------------------------------------------
15:58:28 : *****Check LGCM Programs Start*****
15:58:28 : LGCM Programs Not Found - OK and ready to upgrade
15:58:28 : *****WorkModelDLL Start*****
15:58:29 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
15:58:29 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:58:29 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
15:58:29 : _DetachDLL Call
15:58:29 : _DetachDLL Call End
15:58:30 : Call fn_StartUpgrade
15:58:30 : ********* 2Chip Model.dll input Parameter*************
15:58:30 : MODEL_EVENT : 32769
15:58:30 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
15:58:30 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:58:30 : BootWaitTime : 49500
15:58:30 : UsbHighSpeed : FALSE
15:58:30 : PhoneMode : 2
15:58:30 : NewPhoneBinVersion : V21E_00
15:58:30 : ClearSI : FALSE15:58:48 : wParam : 2007, lParam = 0
15:58:49 : Step : TYPE_WPARAM_READ_FILES
15:58:49 : wParam : 2008, lParam = 8
15:58:49 : Step : TYPE_WPARAM_TOTAL_FILES
15:58:49 : wParam : 2005, lParam = 0
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2003, lParam = 16
15:58:49 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
15:58:49 : wParam : 2005, lParam = 1
15:58:49 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:49 : wParam : 2009, lParam = 1
15:58:50 : Step : TYPE_WPARAM_CURRENT_FILE
15:58:50 : wParam : 2005, lParam = 5
15:58:50 : Step : TYPE_WPARAM_NVIDIA_DN_POS
15:58:30 : AuthMark : 0
15:58:30 : ********* 2Chip Model.dll input Parameter End*************
15:59:23 : wParam : 2010, lParam = 3015
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
15:59:23 : CleanModelDll() : Free Model.dll
15:59:23 : _DetachDLL Call
15:59:23 : _DetachDLL Call End
15:59:23 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:59:23 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:00:44 : Call Retry Thread16:01:27 : _IsConnectedPhone(2)
16:01:27 : 0 - NotConnected.
16:01:27 : 1 - Normal connect success
16:01:27 : 2 - Emergency connect success
16:01:27 : Phone Mode(2)
16:01:27 : *****WorkModelDLL Start*****
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
16:01:28 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:01:28 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\Star_Model.dll)
16:01:28 : _DetachDLL Call
16:01:28 : _DetachDLL Call End
16:01:28 : Call fn_StartUpgrade
16:01:28 : ********* 2Chip Model.dll input Parameter*************
16:01:28 : MODEL_EVENT : 32769
16:01:28 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
16:01:28 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:01:28 : BootWaitTime : 74250
16:01:28 : UsbHighSpeed : FALSE
16:01:28 : PhoneMode : 2
16:01:28 : NewPhoneBinVersion : V21E_00
16:01:28 : ClearSI : FALSE
16:01:28 : AuthMark : 0
16:01:28 : ********* 2Chip Model.dll input Parameter End*************
16:01:45 : wParam : 2007, lParam = 0
16:01:45 : Step : TYPE_WPARAM_READ_FILES
16:01:45 : wParam : 2008, lParam = 8
16:01:45 : Step : TYPE_WPARAM_TOTAL_FILES
16:01:45 : wParam : 2005, lParam = 0
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2003, lParam = 16
16:01:45 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
16:01:45 : wParam : 2005, lParam = 1
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:01:45 : wParam : 2009, lParam = 1
16:01:45 : Step : TYPE_WPARAM_CURRENT_FILE
16:01:45 : wParam : 2005, lParam = 5
16:01:45 : Step : TYPE_WPARAM_NVIDIA_DN_POS
16:02:18 : wParam : 2010, lParam = 3015
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
16:02:18 : CleanModelDll() : Free Model.dll
16:02:18 : _DetachDLL Call
16:02:18 : _DetachDLL Call End
16:02:18 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:02:18 : Page_DeepError()- 8
16:02:18 : [011,700,147,062,092]Problem with communication between cell phone and PC\n\n[009,400,102,102,102]To restart from the beginning, disconnect and connect the USB cable and battery, \nthen power on your cell phone and try according to instructions. This will \nnormally complete update.If not, please visit the LG Service Center.
16:02:18 : *********** End of Page_DeepError() *********
16:03:30 : =======Cancel button click : m_nStep(10)
16:00:44 : Checking the connection with the cell phone...
16:00:44 : Checking the connection with the cell phone...
16:00:44 : dwWaitResetTime(40000 ms)
16:00:48 : _IsConnectedPhone Call
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Title Question Solved
drastic00 said:
Follow this.
http://forum.xda-developers.com/showthread.php?t=2195753
Forget LG updater, it is no good. The reason LG Flash tool did not work for you is likely due to incorrect driver install.
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
And ghost call bug is from having the wrong .fls (baseband) for your area.
Click to expand...
Click to collapse
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
The baseband I tried is not the correct one
Brandon Gomez said:
The answer to my part of problem is to plug in the phone after clicking the yellow arrow. Now I just need an expert to tell me what baseband is best for the maximum coverage (the most frequencies), works with AT&T 4G, 3G, etc..., works with the LG Thrill 4G (P925) with the official ICS of version v30b. and is made for America. I currently flashed the baseband from http://d-h.st/dxl to see how well it works over the next day to the next few days. It currently displays one bar as it always did and appears to have the same version as what I had before, but I don't know if the baseband version name is hard coded into the stock rom.
Click to expand...
Click to collapse
The baseband I mentioned flashing in this post is not the one I am looking for because I have the ghost call problems again. I have created a list of basebands not to use for this purpose and (hopefully) later on I will specify which one does work.
Basebands to not use:
http://d-h.st/dxl
Basebands to use:
Unknown
What is the baseband for:
Frequencies | Carrier | Networks (4G, 3G, Edge, etc...), Phone | Phone Model Number | Android Type (ICS, Jellybean, Gingerbread), Android Version (v30b) | Baseband Version | Country Made For (or at least where it works well)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
? | AT&T | 4G, 3G, Edge, Cell | LG Thrill | P925 | OMAP4430/XMM6260 | ICS | v30b | ?
I added this chart because this is the kind of data baseband hunters are looking for. I hope someone uses this to create a thread to elaborate on this. Download links are optional on the chart.
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
The baseband is from the large partition of v28.
drastic00 said:
Use the baseband included in the rooted v28B download and you should be golden. I do not know what files from other sources will do.
BTW you connect phone and [/I]then press the arrow
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
Never mind, you are correct and I am sleepy Yellow arrow, then connect phone.
Click to expand...
Click to collapse
The baseband I used came from the thread you linked, but it appears to be the same baseband I originally had. I used the large partition link so I will try others from the thread.
P925G baseband file is here
http://www.mediafire.com/?dmr7ra90dv3t8t4
It should work ok with v30B. This is the one I use with his v30C ROM...
What to do?
My phone still has ghost call, but maybe it is because of the dead zone the at&t coverage map shows. I know the ghost call exists because I checked the symptoms and my phone wasn't reliable when I was traveling. I am going to test out froyo now that I can flash again, but if that doesn't work, then it is because of the dead zone.
I won't flash froyo tonight because I will need my phone tomorrow, and according to the coverage map I should have hardly any signal even though I have not tested it with another person's phone yet. I will work on it this weekend.
More Edits:
I just flashed the gingerbread from the LG Optimus 3D, as I could only find this and that is because I already had it (I don't remember why). It had the same issues as ICS about the cell signal even though it is a little bit better, so it is probably the area I live in (however it used to work and my phone is the only phone affected).
I tested the phone this weekend and it now picks up signal very well even though it didn't before. It just isn't as powerful as other phones in the same area so if this is a hardware issue, the question is solved, but if this is a software issue, then anyone who knows why it doesn't pick up signal as well and/or can solve this issue please post why or how this happens or to fix it.
I decided to mark this thread as solved even though I determined this as a software issue, since I decided I no longer care as long as I have sufficient signal. By March I can retire this phone to OS development and see if I can bring some new life to it. I expect to see myself making new threads about the structure of the phone drive and kdz making along at xda as well as learning arm processor assembly (with the x86 bit assembly I am currently learning) on osdev.org around that time of year.
Related
problems flashing back to stock rom from CM7
After flashing CM7 nightly and moving back to stock I can flash stock rom only once What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off So i can flash to stock say 10c coming from CM7 nightly butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom Dont know what im missing maybe any help would be appreciated thanks
So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue. And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc. A better description of the steps you do when you encounter the issue will bring you a better answer. Regards, Me
Have you tried factory resetting it?
Laier94 said: Have you tried factory resetting it? Click to expand... Click to collapse Cleared cache dalvick reset data done everything It never used to do this will try and get copy of log when trying to flash 2nd time Just aswell this is my 2nd phone
here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before 12:06:37 : [C:\LGMobileUpgrade] Try to delete folder 12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade 12:06:37 : Start Date : 2011-12-21 12:06:37 12:06:37 : ---------- QM CSE Testmode --------- 12:06:37 : ---------- CSE mode --------- 12:06:37 : ***** Check Tool Version ***** 12:06:37 : Tool version : 1.5.4.4 12:06:37 : UpgradeDLL version : 1.2.6.5 12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client 12:06:37 : LGE USB Driver Version : 4.9.7.0 12:06:37 : Android PDLV Version : 2.2 12:06:37 : Android NDLV Version : 12:06:37 : ****************************************** 12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder 12:06:37 : SetEmerModeAT() 12:06:37 : *****CheckOS Start******** 12:06:37 : Microsoft_Windows7_Professional_ 12:06:37 : *****CheckPCSyncPrograms Start***** 12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade 12:06:38 : Checking the connection with the cell phone... 12:06:38 : dwWaitResetTime(40000 ms) 12:06:39 : _IsConnectedPhone Call 12:07:00 : _IsConnectedPhone(2) 12:07:00 : 0 - NotConnected. 12:07:00 : 1 - Normal connect success 12:07:00 : 2 - Emergency connect success 12:07:00 : Phone Mode(2) 12:07:01 : *****CheckPCSyncPrograms Start***** 12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade 12:07:03 : ****************CheckAndDownload******************** 12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz***** 12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\) 12:07:03 : File Size = 240079641 12:07:05 : Extract kdz file Success. 12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n 12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb) 12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n 12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll) 12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb) 12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll) 12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab 12:07:07 : ------------------Model.dll Information------------------- 12:07:07 : Filename : LGP970.dll 12:07:07 : Version : 1.0.0.2 12:07:07 : File size : 262144 12:07:07 : File date : 2011/04/05-23:43:32 12:07:07 : PC Created date: 2011/12/21-12:07:06 12:07:07 : ---------------------------------------------------------- 12:07:07 : *****Check LGCM Programs Start***** 12:07:07 : LGCM Programs Not Found - OK and ready to upgrade 12:07:08 : *****WorkModelDLL Start***** 12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb) 12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll) 12:07:10 : _DetachDLL Call 12:07:10 : _DetachDLL Call End 12:07:10 : Call fn_StartUpgrade 12:07:10 : Phone mode change -> CSE 12:07:10 : ********* CDMA Model.dll input Parameter ************* 12:07:10 : MODEL_EVENT : 32769 12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb 12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 12:07:10 : BootWaitTime : 49500 12:07:10 : UsbHighSpeed : FALSE 12:07:10 : PhoneMode : 4 12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00 12:07:10 : ClearSI : FALSE 12:07:10 : AuthMark : 0 12:07:10 : ********* CDMA Model.dll input Parameter End************* 12:07:15 : wParam : 2004, lParam = 7 12:07:15 : MODEL DLL Event : (2004, 7) 12:07:16 : Model Dll Msg Not Found(2004, 7) 12:07:16 : wParam : 2007, lParam = 0 12:07:16 : MODEL DLL Event : (2007, 0) 12:07:17 : Model Dll Msg Not Found(2007, 0) 12:07:17 : wParam : 2010, lParam = 3002 12:07:17 : MODEL DLL Event : (2010, 3002) 12:07:17 : Model Dll Msg Not Found(2010, 3002)
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
JasonQMe said: Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully. Click to expand... Click to collapse Figured it out now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all anyway thanks people but they all work fine now didnt realise i had origina downloads on other harddrive this thread can be closed now
maniAK- said: Figured it out now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all anyway thanks people but they all work fine now didnt realise i had origina downloads on other harddrive this thread can be closed now Click to expand... Click to collapse So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?
Keep only "V10E_00.kdz" as firmware name. Sent from my LG-P970
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz***** Click to expand... Click to collapse rgabi is right
Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out
[Q] Optimus 3D(LGP920) baseband on Thrill 4G(LGP925)
I have a rogers LGP925 and i followed adixtra's instructions on this thread: http://forum.xda-developers.com/showthread.php?t=1287236 I got my phone from v10c(stock) to v10k(from the link posted in that thread). does this change the baseband? I want to use this phone on carriers that use the 1700 and 2100 bands. The phone originally had: HSDPA 850 / 1900 / 2100. In the above mentioned thread some people said they got it to work with Tmobile's 3G(which i believe uses 1700/2100). does anyone know how to get it working on the 1700 band? Another thing, when i try to flash v21b (from adixtra's thread) it gives me this error: 17:15:16 : Connection check and IMEI check OK.... 17:15:16 : *****Check LGCM Programs Start***** 17:15:16 : LGCM Programs Not Found - OK and ready to upgrade 17:15:18 : *****WorkModelDLL Start***** 17:15:21 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21A.wdb) 17:15:21 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 17:15:21 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dll) 17:15:21 : _DetachDLL Call 17:15:21 : _DetachDLL Call End 17:15:21 : Call fn_StartUpgrade 17:15:21 : ********* 2Chip Model.dll input Parameter************* 17:15:21 : MODEL_EVENT : 32769 17:15:21 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21A.wdb 17:15:21 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 17:15:21 : BootWaitTime : 49500 17:15:21 : UsbHighSpeed : FALSE 17:15:21 : PhoneMode : 1 17:15:21 : NewPhoneBinVersion : V21A_00 (1) 17:15:21 : ClearSI : FALSE 17:15:21 : AuthMark : 0 17:15:21 : ********* 2Chip Model.dll input Parameter End************* 17:15:21 : wParam : 2004, lParam = 5 17:15:22 : Step : TYPE_WPARAM_IFX_DN_POS 17:15:38 : wParam : 2004, lParam = 6 17:16:08 : wParam : 2004, lParam = 7 17:16:09 : wParam : 2007, lParam = 0 17:16:09 : Step : TYPE_WPARAM_READ_FILES 17:16:09 : wParam : 2010, lParam = 3002 17:16:09 : CleanModelDll() : Free Model.dll 17:16:09 : _DetachDLL Call 17:16:09 : _DetachDLL Call End 17:16:09 : Page_Error ºÎºÐÀÔ´Ï´Ù 17:16:09 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù any help would be appreciated.
Do not rename kdz file. I see "V21A_00 (1).kdz" And delete imei from log v21b is non rootable atm. Try v21a
Thanks. flashed v21a.kdz, now it shows 2.3.5. Does the following procedure work in windows 7 sp3? http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
Windows 7 SP3? O_O I have tried on windows 7 sp1,works
sorry i was thinking about XP and typing Windows 7. I have Windows 7 sp1 but the process isnt working for me. when i install "LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0" driver it doesnt install the LGSIMODEM01 and 02. and when i plug in my phone it says "USB device not recognized". what am i doing wrong?
to me it was the same and removing the battery fix and then do the following. Put the battery power button + volume up when it detects w7 release power button but keep volume up. After installing the driver start the installation of KDZ
[Q] LG updater error
Hey I am from greece, got an optimus 2x. I learned about the ics update downloaded the p990 drivers and the tool for update. I connect the device and it says that a new update is available. Let me say here i change the first option from US into EUROPE. I click update and it loads some stuff and then it says preparing upgrade and after 1 minute or something it says An error occure while connecting to the phone. I have changed usb ports uninstalled and installed the p990 drivers etc etc. restarted the pc as well... but keep gettin the same error.. anyone got any idea to help me out?
Try PC Suite IV, or launch Support Tool manually. Still won't update Alda1981 said: Hey I am from greece, got an optimus 2x. I learned about the ics update downloaded the p990 drivers and the tool for update. I connect the device and it says that a new update is available. Let me say here i change the first option from US into EUROPE. I click update and it loads some stuff and then it says preparing upgrade and after 1 minute or something it says An error occure while connecting to the phone. I have changed usb ports uninstalled and installed the p990 drivers etc etc. restarted the pc as well... but keep gettin the same error.. anyone got any idea to help me out? Click to expand... Click to collapse Try using PC Suite IV if you aren't already. I had to disconnect my phone from usb, reconnect, then immediately hit connect on the PC Suite to get it to work. If it still doesn't, just run the Mobile Support Tool on its own. You may have to turn off&on debugging mode on your phone before it will read the version and model. I still can't update though. PC Suite tells me there is an update, while Support Tool tells me there isn't. Below is a picture to show what I think is the Support Tool half thinking my phone is already V30A. Any Ideas? Maybe I've made a first-time noob mistake { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please try again later.", "lightbox_start_slideshow": "Start slideshow", "lightbox_stop_slideshow": "Stop slideshow", "lightbox_full_screen": "Full screen", "lightbox_thumbnails": "Thumbnails", "lightbox_download": "Download", "lightbox_share": "Share", "lightbox_zoom": "Zoom", "lightbox_new_window": "New window", "lightbox_toggle_sidebar": "Toggle sidebar" }
I've exactly the same problem... !
The same problem in Slovakia. In Update History I see v30A but updater shows V20Q and says that Im on newest version. Bravo LG!
How To Update To V30A/ICS on O2X/Optimus 2x/P990 Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this... UPDATED INSTRUCTIONS - If you are in the process of doing this, check the new step 4 1. Get the All-In-One tool and extract it somewhere. -I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you. +I used MyBackup (on market) to backup and restore all my data. 2. Download: V30A from here 3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is). 4. Set the lock delay/screen timeout on the phone to 30 minutes and make sure it isn't in USB mass storage mode. Stops the driver failing 5. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6. -If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right. +Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line) +I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one). -If it fails at around 6% with a device not connected error, DO NOT DO STEP 10 IN THE DOCUMENT. Very high chance of bricking. +Make sure you set the lock delay/screen timeout to 30 mins and that the phone isn't in mass storage mode. 6. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards. 7. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that. -If you do have a problem, search the forum. Like the intro video says, your probably not special Proof that it works: -M1cr0man
any help please? now i have v28e.
m1cr0man said: Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this... 1. Get the All-In-One tool and extract it somewhere. -I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you. +I used MyBackup (on market) to backup and restore all my data. 2. Download: V30A from here 3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is). 4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6. -If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right. +Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line) +I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one). 5. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards. 6. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that. -If you do have a problem, search the forum. Like the intro video says, your probably not special -M1cr0man Click to expand... Click to collapse Thank you, I followed your instructions and everything went OK. Now I can enjoy ICS finally
m1cr0man said: Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this... 1. Get the All-In-One tool and extract it somewhere. -I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you. +I used MyBackup (on market) to backup and restore all my data. 2. Download: V30A from here 3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is). 4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6. -If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right. +Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line) +I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one). 5. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards. 6. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that. -If you do have a problem, search the forum. Like the intro video says, your probably not special -M1cr0man Click to expand... Click to collapse I don't understand the free line in the host, I search on Google, have no idea what to do. I'm going crazy!! I tried this way and it gives me an error, I tried another one and it oppened the LG Update Tool wich tells me that my phone is up to date, I really don't know what to do, I'm going nuts. I'm attaching a screenshot of the error I'm having
Will this work for indian lg optimus 2x p990 Hey guys, will this update work for india customers of the lg optimus 2x....I am downloading it but i am scared to update it. I hope my phone doesn't get bricked by installing this update. Please help...
juzers42 said: Hey guys, will this update work for india customers of the lg optimus 2x....I am downloading it but i am scared to update it. I hope my phone doesn't get bricked by installing this update. Please help... Click to expand... Click to collapse It will work in India, intact I'd say it will work anywhere (don't blame me if you are outside Europe and it fails though ). As for the Bricking fear, you simply won't brick it doing this. The program used to flash the device in this method is an official LG program so it is very reliable. I had the same fear at the time as well, so don't worry. frikou said: I don't understand the free line in the host, I search on Google, have no idea what to do. I'm going crazy!! I tried this way and it gives me an error, I tried another one and it oppened the LG Update Tool wich tells me that my phone is up to date, I really don't know what to do, I'm going nuts. I'm attaching a screenshot of the error I'm having Click to expand... Click to collapse As far as I remember reading, you must turn off UAC on windows and be in an administrator account. This looks like what may be wrong since the error you got was "permission denied". As for the hosts file, go into c:\windows\system32\drivers\etc\ and open the file "hosts" with notepad. Then just make sure there is at least one free line at the bottom of it. Hope this helps, feel free to ask if you need more help. Sent from my LG-P990 running ICS using xda app-developers app
Thanks Thanks m1cr0man, for the quick and positive response...will let you know after flashing it how it works.....
m1cr0man said: As far as I remember reading, you must turn off UAC on windows and be in an administrator account. This looks like what may be wrong since the error you got was "permission denied". As for the hosts file, go into c:\windows\system32\drivers\etc\ and open the file "hosts" with notepad. Then just make sure there is at least one free line at the bottom of it. Hope this helps, feel free to ask if you need more help. Sent from my LG-P990 running ICS using xda app-developers app Click to expand... Click to collapse Thanks a lot for your help, nonetheless, the error still appears This is what I did: I edited the host file to add that line at the bottom with notepad and since it only let me save a .txt file I deleted the extension and replaced the original file. Then I deactivated User Account Control and rebooted, I'm using an Administrator account but the error still appears. I attached the three screens I get after choosing option 6 in the ToolKit. I guess I'm still a noob after all.. Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck!
frikou said: Thanks a lot for your help, nonetheless, the error still appears This is what I did: I edited the host file to add that line at the bottom with notepad and since it only let me save a .txt file I deleted the extension and replaced the original file. Then I deactivated User Account Control and rebooted, I'm using an Administrator account but the error still appears. I attached the three screens I get after choosing option 6 in the ToolKit. I guess I'm still a noob after all.. Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck! Click to expand... Click to collapse First of all the error you get is not a script error but a runtime error, meaning that something in your PC is wrong. Since I wrote that script and I know what it does, do NOT forget to re-edit the hosts file after and remove the line, because csmg.lgmobile.com will always be off-line for you. It is needed only for the LG tool to flash a kdz file off-line without checking LG database. Good luck and let me know.
frikou said: Edit: I followed the file where the error was held and took a look of it with Notepad++ (see attachment 4) and that error took me to the lines that were going to edit the host file to add this one: "127.0.0.1 csmg.lgmobile.com", so I tried to do it myself manually, I added that line in the host file and it worked! But, (yeah, there's still a but), when I got to the end of everything, just when it went off to install the update, the program told me that the battery level of my phone was too low and that I must charge it first I had 43% of battery left. Haha, but yeah, at least it's working, I'm going to give it a shot after the phone is done charging, wish me luck! Click to expand... Click to collapse Glad to see you got that fixed Let us know how it gets on after flashing.
It all went alright but then at 6% the phone turned on itself to the lockscreen and the program asked me to unplug it, remove the battery, put it back on and turn on the phone, I did what the instructions said, I went to Software Update mode by power on pressing vol-, as a result, everything was fine until 80% when it gave me back the same error, so now my phone is kinda of bricked, it just shows a LG logo and then an opened dead android, lol. I'm downloading NVflash, gonna use it for the first time, hopefully everything goes well so I can try the update again. This is the whole update log: Code: 13:06:41 : [C:\LGMobileUpgrade] Try to delete folder 13:06:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade 13:06:41 : Start Date : 2012-12-09 13:06:41 13:06:41 : ---------- QM Testmode --------- 13:06:41 : ***** Check Tool Version ***** 13:06:41 : Tool version : 1.5.4.8 13:06:41 : UpgradeDLL version : 1.2.6.7 13:06:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client 13:06:41 : LGE USB Driver Version : 13:06:41 : Android PDLV Version : 13:06:41 : Android NDLV Version : 13:06:41 : ****************************************** 13:06:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder 13:06:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone 13:06:42 : SetEmerModeAT() 13:06:42 : _IsConnectedPhone Call 13:06:50 : _IsConnectedPhone(1) 13:06:50 : 0 - NotConnected. 13:06:50 : 1 - Normal connect success 13:06:50 : 2 - Emergency connect success 13:06:50 : *****CheckOS Start******** 13:06:50 : Microsoft_Windows7_Home Edition_Service Pack 1 13:06:50 : *****CheckPCSyncPrograms Start***** 13:06:50 : PCSyncPrograms Not Found - OK and ready to upgrade 13:06:50 : Checking the connection with the cell phone... 13:06:50 : dwWaitResetTime(40000 ms) 13:06:51 : Phone Mode(1) 13:06:51 : *****GetPhoneType Start***** 13:06:51 : Phone Type : IFX_NVIDIA 13:06:51 : *****GetPhoneModel Start***** 13:06:52 : Phone read Model : LG-P990 13:06:52 : Server param Model : 13:06:52 : *****GetPhoneBinaryVersion Start***** 13:06:53 : Phone Bin Version : V28G_EUR_XX_00 13:06:53 : *****Get ESN / IMEI / MEID Start***** 13:06:56 : ESN/IMEI/MEID : XXXXXXXXXXXXXXX 13:06:57 : Phone type Compare start 13:06:57 : *****Start _GetBatteryLevel***** 13:06:57 : Battery(5) 13:06:59 : *****CheckPCSyncPrograms Start***** 13:07:00 : PCSyncPrograms Not Found - OK and ready to upgrade 13:07:01 : ****************CheckAndDownload******************** 13:07:01 : ******Extract Start C:\Users\Frikou\Desktop\V30A_00.kdz***** 13:07:01 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\) 13:07:01 : File Size = 730952417 13:08:48 : Extract kdz file Success. 13:09:00 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb\n 13:09:00 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb) 13:09:00 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\P990.dll\n 13:09:00 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\P990.dll) 13:09:00 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb) 13:09:00 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll) 13:09:00 : Extract End C:\Users\Frikou\Desktop\V30A_00.cab 13:09:01 : ------------------Model.dll Information------------------- 13:09:01 : Filename : P990.dll 13:09:01 : Version : 0.0.0.5 13:09:01 : File size : 434176 13:09:01 : File date : 2012/10/19-14:18:36 13:09:01 : PC Created date: 2012/12/09-13:09:00 13:09:01 : ---------------------------------------------------------- 13:09:01 : Connection check start........ 13:09:09 : Check phone IMEI/ESN/MEID again. 13:09:09 : *****2nd ESN / IMEI / MEID check Start***** 13:09:12 : 2nd ESN/IMEI/MEID check : XXXXXXXXXXXXXXX 13:09:12 : IMEI check OK. 13:09:12 : Connection check and IMEI check OK.... 13:09:12 : *****Check LGCM Programs Start***** 13:09:12 : LGCM Programs Not Found - OK and ready to upgrade 13:09:13 : *****WorkModelDLL Start***** 13:09:17 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb) 13:09:17 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 13:09:17 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll) 13:09:17 : _DetachDLL Call 13:09:17 : _DetachDLL Call End 13:09:17 : Call fn_StartUpgrade 13:09:17 : ********* 2Chip Model.dll input Parameter************* 13:09:17 : MODEL_EVENT : 32769 13:09:17 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb 13:09:17 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 13:09:18 : BootWaitTime : 49500 13:09:18 : UsbHighSpeed : FALSE 13:09:18 : PhoneMode : 1 13:09:18 : NewPhoneBinVersion : V30A_00 13:09:18 : ClearSI : FALSE 13:09:18 : AuthMark : 0 13:09:18 : ********* 2Chip Model.dll input Parameter End************* 13:09:18 : wParam : 2004, lParam = 5 13:09:18 : Step : TYPE_WPARAM_IFX_DN_POS 13:09:33 : wParam : 2004, lParam = 6 13:13:43 : wParam : 2004, lParam = 7 13:13:43 : wParam : 2010, lParam = 3000 13:13:43 : CleanModelDll() : Free Model.dll 13:13:43 : _DetachDLL Call 13:13:43 : _DetachDLL Call End 13:13:43 : Page_Error ºÎºÐÀÔ´Ï´Ù 13:13:43 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù 13:16:16 : Call Retry Thread 13:16:16 : Checking the connection with the cell phone... 13:16:16 : Checking the connection with the cell phone... 13:16:17 : dwWaitResetTime(40000 ms) 13:16:21 : _IsConnectedPhone Call 13:16:52 : _IsConnectedPhone(2) 13:16:52 : 0 - NotConnected. 13:16:52 : 1 - Normal connect success 13:16:52 : 2 - Emergency connect success 13:16:52 : Phone Mode(2) 13:16:52 : *****WorkModelDLL Start***** 13:16:52 : _DetachDLL Call 13:16:52 : _DetachDLL Call End 13:16:52 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb) 13:16:52 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 13:16:52 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll) 13:16:52 : _DetachDLL Call 13:16:52 : _DetachDLL Call End 13:16:52 : Call fn_StartUpgrade 13:16:52 : ********* 2Chip Model.dll input Parameter************* 13:16:52 : MODEL_EVENT : 32769 13:16:52 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb 13:16:52 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 13:16:52 : BootWaitTime : 74250 13:16:52 : UsbHighSpeed : FALSE 13:16:52 : PhoneMode : 2 13:16:52 : NewPhoneBinVersion : V30A_00 13:16:52 : ClearSI : FALSE 13:16:52 : AuthMark : 0 13:16:52 : ********* 2Chip Model.dll input Parameter End************* 13:16:57 : wParam : 2004, lParam = 7 13:16:57 : Step : TYPE_WPARAM_IFX_DN_POS 13:16:57 : wParam : 2007, lParam = 0 13:16:57 : Step : TYPE_WPARAM_READ_FILES 13:16:57 : wParam : 2004, lParam = 8 13:16:57 : Step : TYPE_WPARAM_IFX_DN_POS 13:16:57 : wParam : 2004, lParam = 9 13:16:58 : wParam : 2004, lParam = 10 13:17:00 : wParam : 2004, lParam = 11 13:17:00 : wParam : 1007, lParam = 1 13:17:00 : Model Dll Msg Not Found(1007, 1) 13:17:05 : wParam : 2004, lParam = 12 13:17:05 : wParam : 1007, lParam = 2 13:17:05 : Model Dll Msg Not Found(1007, 2) 13:17:05 : wParam : 2004, lParam = 12 13:17:25 : wParam : 2004, lParam = 13 13:17:25 : wParam : 2004, lParam = 14 13:17:26 : wParam : 2004, lParam = 15 13:17:26 : wParam : 2009, lParam = 1 13:17:26 : Step : TYPE_WPARAM_CURRENT_FILE 13:17:26 : wParam : 2004, lParam = 15 13:17:26 : Step : TYPE_WPARAM_IFX_DN_POS 13:17:28 : wParam : 2004, lParam = 16 13:17:28 : wParam : 2009, lParam = 2 13:17:28 : Step : TYPE_WPARAM_CURRENT_FILE 13:17:28 : wParam : 2004, lParam = 16 13:17:28 : Step : TYPE_WPARAM_IFX_DN_POS 13:17:30 : wParam : 2004, lParam = 17 13:17:31 : wParam : 2004, lParam = 18 13:17:33 : wParam : 2009, lParam = 4 13:17:33 : Step : TYPE_WPARAM_CURRENT_FILE 13:17:34 : wParam : 2004, lParam = 19 13:17:34 : Step : TYPE_WPARAM_IFX_DN_POS 13:17:36 : wParam : 2004, lParam = 20 13:17:38 : wParam : 2004, lParam = 21 13:17:39 : wParam : 2004, lParam = 22 13:17:40 : wParam : 2004, lParam = 23 13:17:41 : wParam : 2009, lParam = 3 13:17:41 : Step : TYPE_WPARAM_CURRENT_FILE 13:17:42 : wParam : 2004, lParam = 24 13:17:42 : Step : TYPE_WPARAM_IFX_DN_POS 13:17:50 : wParam : 2004, lParam = 25 13:17:54 : wParam : 2004, lParam = 26 13:18:01 : wParam : 2004, lParam = 27 13:18:04 : wParam : 2004, lParam = 28 13:18:10 : wParam : 2004, lParam = 29 13:18:16 : wParam : 2004, lParam = 30 13:18:20 : wParam : 2004, lParam = 31 13:18:25 : wParam : 2004, lParam = 32 13:18:32 : wParam : 2004, lParam = 33 13:18:35 : wParam : 2004, lParam = 34 13:18:42 : wParam : 2004, lParam = 35 13:18:45 : wParam : 2004, lParam = 36 13:18:51 : wParam : 2004, lParam = 37 13:18:56 : wParam : 2004, lParam = 38 13:19:01 : wParam : 2004, lParam = 39 13:19:06 : wParam : 2004, lParam = 40 13:19:13 : wParam : 2004, lParam = 41 13:19:16 : wParam : 2004, lParam = 42 13:19:22 : wParam : 2004, lParam = 43 13:19:25 : wParam : 2004, lParam = 44 13:19:32 : wParam : 2004, lParam = 45 13:19:37 : wParam : 2004, lParam = 46 13:19:43 : wParam : 2004, lParam = 47 13:19:47 : wParam : 2004, lParam = 48 13:19:52 : wParam : 2004, lParam = 49 13:19:56 : wParam : 2004, lParam = 50 13:20:14 : wParam : 2005, lParam = 52 13:20:15 : Step : TYPE_WPARAM_NVIDIA_DN_POS 13:20:18 : wParam : 2005, lParam = 53 13:20:37 : wParam : 2005, lParam = 54 13:20:40 : wParam : 2005, lParam = 55 13:20:43 : wParam : 2005, lParam = 56 13:20:46 : wParam : 2005, lParam = 57 13:20:54 : wParam : 2005, lParam = 58 13:20:57 : wParam : 2005, lParam = 59 13:21:00 : wParam : 2005, lParam = 60 13:21:02 : wParam : 2005, lParam = 61 13:21:06 : wParam : 2005, lParam = 62 13:21:08 : wParam : 2005, lParam = 63 13:21:11 : wParam : 2005, lParam = 64 13:21:14 : wParam : 2005, lParam = 65 13:21:17 : wParam : 2005, lParam = 66 13:21:26 : wParam : 2005, lParam = 67 13:21:29 : wParam : 2005, lParam = 68 13:21:32 : wParam : 2005, lParam = 69 13:21:35 : wParam : 2005, lParam = 70 13:21:38 : wParam : 2005, lParam = 71 13:21:41 : wParam : 2005, lParam = 72 13:21:44 : wParam : 2005, lParam = 73 13:21:47 : wParam : 2005, lParam = 74 13:21:50 : wParam : 2005, lParam = 75 13:21:58 : wParam : 2005, lParam = 76 13:22:01 : wParam : 2005, lParam = 77 13:22:04 : wParam : 2005, lParam = 78 13:22:07 : wParam : 2005, lParam = 79 13:22:10 : wParam : 2005, lParam = 80 13:22:30 : wParam : 2010, lParam = 3013 13:22:30 : CleanModelDll() : Free Model.dll 13:22:30 : _DetachDLL Call 13:22:30 : _DetachDLL Call End 13:22:30 : Page_Error ºÎºÐÀÔ´Ï´Ù 13:22:30 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù 13:22:47 : Call Retry Thread 13:22:47 : Checking the connection with the cell phone... 13:22:47 : Checking the connection with the cell phone... 13:22:47 : dwWaitResetTime(40000 ms) 13:22:51 : _IsConnectedPhone Call 13:23:10 : _IsConnectedPhone(1) 13:23:10 : 0 - NotConnected. 13:23:10 : 1 - Normal connect success 13:23:10 : 2 - Emergency connect success 13:23:10 : Phone Mode(1) 13:23:10 : *****WorkModelDLL Start***** 13:23:10 : _DetachDLL Call 13:23:10 : _DetachDLL Call End 13:23:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb) 13:23:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 13:23:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\P990.dll) 13:23:10 : _DetachDLL Call 13:23:10 : _DetachDLL Call End 13:23:10 : Call fn_StartUpgrade 13:23:10 : ********* 2Chip Model.dll input Parameter************* 13:23:10 : MODEL_EVENT : 32769 13:23:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb 13:23:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 13:23:10 : BootWaitTime : 111375 13:23:10 : UsbHighSpeed : FALSE 13:23:10 : PhoneMode : 1 13:23:10 : NewPhoneBinVersion : V30A_00 13:23:10 : ClearSI : FALSE 13:23:10 : AuthMark : 0 13:23:10 : ********* 2Chip Model.dll input Parameter End************* 13:23:10 : wParam : 2004, lParam = 5 13:23:10 : Step : TYPE_WPARAM_IFX_DN_POS 13:23:10 : wParam : 2004, lParam = 6 13:23:15 : wParam : 2004, lParam = 7 13:23:15 : wParam : 2007, lParam = 0 13:23:15 : Step : TYPE_WPARAM_READ_FILES 13:23:15 : wParam : 2004, lParam = 8 13:23:15 : Step : TYPE_WPARAM_IFX_DN_POS 13:23:15 : wParam : 2004, lParam = 9 13:23:16 : wParam : 2004, lParam = 10 13:23:18 : wParam : 2004, lParam = 11 13:23:38 : wParam : 2010, lParam = 3009 13:23:38 : CleanModelDll() : Free Model.dll 13:23:38 : _DetachDLL Call 13:23:38 : _DetachDLL Call End 13:23:38 : Page_Error ºÎºÐÀÔ´Ï´Ù 13:23:38 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù 13:24:33 : Call Retry Thread 13:24:33 : Checking the connection with the cell phone... 13:24:33 : Checking the connection with the cell phone... 13:24:33 : dwWaitResetTime(40000 ms) 13:24:37 : _IsConnectedPhone Call 13:24:37 : _IsConnectedPhone(0) 13:24:37 : 0 - NotConnected. 13:24:37 : 1 - Normal connect success 13:24:37 : 2 - Emergency connect success 13:24:41 : _IsConnectedPhone Call 13:24:41 : _IsConnectedPhone(0) 13:24:41 : 0 - NotConnected. 13:24:41 : 1 - Normal connect success 13:24:41 : 2 - Emergency connect success 13:24:45 : _IsConnectedPhone Call 13:24:45 : _IsConnectedPhone(0) 13:24:45 : 0 - NotConnected. 13:24:45 : 1 - Normal connect success 13:24:45 : 2 - Emergency connect success 13:24:45 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:25:36 : _IsConnectedPhone Call 13:25:59 : _IsConnectedPhone(0) 13:25:59 : 0 - NotConnected. 13:25:59 : 1 - Normal connect success 13:25:59 : 2 - Emergency connect success 13:25:59 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:27:43 : _IsConnectedPhone Call 13:27:50 : _IsConnectedPhone(0) 13:27:50 : 0 - NotConnected. 13:27:50 : 1 - Normal connect success 13:27:50 : 2 - Emergency connect success 13:27:50 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:28:23 : _IsConnectedPhone Call 13:28:30 : _IsConnectedPhone(0) 13:28:30 : 0 - NotConnected. 13:28:30 : 1 - Normal connect success 13:28:30 : 2 - Emergency connect success 13:28:30 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:28:50 : _IsConnectedPhone Call 13:28:57 : _IsConnectedPhone(0) 13:28:57 : 0 - NotConnected. 13:28:57 : 1 - Normal connect success 13:28:57 : 2 - Emergency connect success 13:28:57 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:29:37 : _IsConnectedPhone Call 13:29:45 : _IsConnectedPhone(0) 13:29:45 : 0 - NotConnected. 13:29:45 : 1 - Normal connect success 13:29:45 : 2 - Emergency connect success 13:29:45 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:44:35 : _IsConnectedPhone Call 13:44:35 : _IsConnectedPhone(0) 13:44:35 : 0 - NotConnected. 13:44:35 : 1 - Normal connect success 13:44:35 : 2 - Emergency connect success 13:44:35 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:44:42 : _IsConnectedPhone Call 13:44:42 : _IsConnectedPhone(0) 13:44:42 : 0 - NotConnected. 13:44:42 : 1 - Normal connect success 13:44:42 : 2 - Emergency connect success 13:44:42 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button. 13:45:15 : Check Cancel button active.. 13:45:15 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ. 13:45:15 : CLGMobileHttp Class ¼Ò¸ê... 13:45:16 : Page_Error ºÎºÐÀÔ´Ï´Ù 13:45:16 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
frikou said: It all went alright but then at 6% the phone turned on itself to the lockscreen and the program asked me to unplug it, remove the battery, put it back on and turn on the phone, I did what the instructions said, I went to Software Update mode by power on pressing vol-, as a result, everything was fine until 80% when it gave me back the same error, so now my phone is kinda of bricked, it just shows a LG logo and then an opened dead android, lol. I'm downloading NVflash, gonna use it for the first time, hopefully everything goes well so I can try the update again. Click to expand... Click to collapse ...How did you manage to choose option 3 or option 2 instead of option 6 (LG Update Tool) when I clearly stated option 6? 4. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6. Click to expand... Click to collapse Either way, you just tried to install NVFlash on your phone and failed (option 2/3), instead of updating to ICS. I have no idea what to do to fix that, so you're on your own for now if what you are trying doesn't work. EDIT: Ok, now I'm really confused. If you got that log you did choose option 6, but it should not and will not ask you to take out the battery and hold down the recovery buttons. You either clicked another option aswell or...i dont know what else.
m1cr0man said: ...How did you manage to choose option 3 or option 2 instead of option 6 (LG Update Tool) when I clearly stated option 6? Either way, you just tried to install NVFlash on your phone and failed (option 2/3), instead of updating to ICS. I have no idea what to do to fix that, so you're on your own for now if what you are trying doesn't work. Click to expand... Click to collapse I chose option 6, of course, I clearly remember that, option 6, then it told me some advices and told me to click any key to continue so I did. Why do you mean I tried to install NVflash on my phone? I have followed every indication step by step. What I said is that I'm downloading NVflash now to unblick my phone and try the update to ICS again using the Toolkit. I really appreciate all the help people here have gave me, thank you. m1cr0man said: EDIT: Ok, now I'm really confused. If you got that log you did choose option 6, but it should not and will not ask you to take out the battery and hold down the recovery buttons. You either clicked another option aswell or...i dont know what else. Click to expand... Click to collapse Man, I was scared a little when you said that you had no idea how to fix that, I thought my phone was dead for good, now I can breathe again. The vol- down stuff was an instruction from the Office Word document that opened to guide through the update, it says: "10. Wait until it finishes. If it gives any message that the phone is not connected or something like that, disconnect it, turn it off, remove battery and plug it back holding "Volume Down" key. (Automatically goes to Upgrade mode)."
frikou said: I chose option 6, of course, I clearly remember that, option 6, then it told me some advices and told me to click any key to continue so I did. Why do you mean I tried to install NVflash on my phone? I have followed every indication step by step. What I said is that I'm downloading NVflash now to unblick my phone and try the update to ICS again using the Toolkit. I really appreciate all the help people here have gave me, thank you. Click to expand... Click to collapse Hmm ok. My point is that it should not have asked you to do the unplug and software update mode stuff - I only got that when I was rooting it. Either way, sorry it bricked. It should not have done that. EDIT: OOOH RIIIITE. Step 10 . I didn't have to do that - no message to say it wasn't connected. Hmm, it might be associated with the fact that I set the screen lock delay to 30 mins before hand. Try that when you are doing it again. I'll include it in the instructions post also.
It looks like even that it didn't go to 100% I'm on the new partition layout because my phone shows a Red LG Logo and the nvflash kit tool didn't rescue it, I'm downloading the Tool Kit for ICS to try it out, 30 more minutes before the download finishes. Edit: Alright, using this NVflash toolkit for ICS I went back to old partition layout and flashed my old Rom, I'm so happy, my phone is alive again. Alright, now I'm going to set the 30min lock time and try to update to ICS again Edit 2: I tried updating again, the same thing happened, had to use NVflash to restore my phone again, I'm gonna try to update another day using a different pc, maybe it will work, thanks a lot m1cr0man, i really appreciate all your help.
m1cr0man said: Alright then...I got my O2X updated and it was not easy. I'll try and provide the best steps I can. THIS IS NOT A CUSTOM FIRMWARE. I thought it was too, until I saw the LG R&D tool at the end of all this... UPDATED INSTRUCTIONS - If you are in the process of doing this, check the new step 4 1. Get the All-In-One tool and extract it somewhere. -I suggest doing a backup if you haven't already. Run this tool to do so - it has a program that will compress your internal/external sd for you. +I used MyBackup (on market) to backup and restore all my data. 2. Download: V30A from here 3. Make sure there is at least 1 free line at the end of your hosts file (GIYF if you don't know what it is). 4. Set the lock delay/screen timeout on the phone to 30 minutes and make sure it isn't in USB mass storage mode. Stops the driver failing 5. Run the LG Update Tool through "P990-Toolkit.cmd" (located where you extracted all-in-one tool) - option 6. -If it fails when you press "Normal web upgrade test" in the R&D tool - either your hosts file is wrong or the apache server didnt set itself up right. +Make sure you added that free line in your hosts file. Otherwise, fix the details the program added (will be at end of last non-free line) +I don't know what you can do in the second case other than setup your own apache server which is what I did (I had one). -If it fails at around 6% with a device not connected error, DO NOT DO STEP 10 IN THE DOCUMENT. Very high chance of bricking. +Make sure you set the lock delay/screen timeout to 30 mins and that the phone isn't in mass storage mode. 6. Wait about 10-15 mins. Don't worry - it does take a while to reboot afterwards. 7. On my behalf, enjoy the update and dont complain about it the second you see lag or something else ridiculous like that. -If you do have a problem, search the forum. Like the intro video says, your probably not special Proof that it works: -M1cr0man Click to expand... Click to collapse Thank you very much I am from Portugal and it worked like a charm
[Q] Can't root with carrier
Hi, I have tried to root my lg optimus 4x hd phone by following all the instructions I found on xda and elsewhere. My cell phone carrier is Videotron (canada). I have removed the antivirus app and couldn't see any trace of a screen control app. The problem appears when I try to launch the system backup test app, it get an error message (it won't launch). Any help appreciated please, Thanks
which firmware version do you have ? try this: http://forum.xda-developers.com/showthread.php?t=1886460
firmware version Hi tobixdev, Here is all the info about my phone (firmware/software): LG-P880g Android 4.0.3 kernel: 2.6.39.4-00002-g99c972b build: IML74k Version: LG-P880g-V10b-sep-05-2012 So I guess the answer to your question is V10b... Meanwhile, I will try with the link you provided Thanks for your help!
AW: [Q] Can't root with carrier Are you brasilian or canadian ? Sent from my LG-P880 using xda app-developers app
Canadian Sent from my LG-P880g using xda app-developers app
enriqueriv said: Canadian Sent from my LG-P880g using xda app-developers app Click to expand... Click to collapse http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12
Error message - kdz upgrade tobixdev said: http://forum.xda-developers.com/showpost.php?p=37268564&postcount=12 Click to expand... Click to collapse Hi tobixdev, I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001 What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada). Here is the log file: [R&D Test Tools Log File] 12:30:30 : Launching SW update 12:30:30 : Unpacking KDZ 12:30:42 : KDZ file extraced 12:30:43 : Files were extracted. 12:30:43 : LGMobileDL Load. 12:30:43 : Port = -1 12:30:43 : Connecting to phone 12:30:56 : Check Phone mode = 2 12:30:56 : Phone type check....... 12:30:58 : LGMobileDL.DLL Loading.... 12:30:58 : _SetAuthMark Fail 12:30:58 : _SetAuthMark Ok : wAuthMark(65535) 12:30:58 : _DetachDLL Call 12:30:58 : _DetachDLL Call End 12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz 12:30:58 : Param : moduleDir = 12:30:58 : Param : waitTime = 0 12:30:58 : Param : UsbHighSpeed = 1 12:30:58 : Param : PhoneMode = 2 12:30:58 : Param : BinVersion = V10C_00 12:30:58 : Param : AuthMark = 65535 12:30:58 : Call fn_StartUpgrade 12:31:05 : 3GQCT : wParam = 100, lParam = 5001 12:31:05 : Step : Upgrade Error error code = 5001 12:31:05 : ResetStartInfo() Call 12:31:05 : _DetachDLL Call 12:31:05 : _DetachDLL Call End 12:31:06 : FreeLibrary Call 12:31:06 : FreeLibrary Call End 12:31:06 : ResetStartInfo() Call End 12:31:06 : ===FINISHED=== Thanks again for help and swift response!
enriqueriv said: Hi tobixdev, I followed your suggested method, and I get this error message when doing the kdz upgrade: error code 5001 What am I doing wrong? Using the wrong kdz or version file? Is it V10b or V10c for Videotron (Canada). Here is the log file: [R&D Test Tools Log File] 12:30:30 : Launching SW update 12:30:30 : Unpacking KDZ 12:30:42 : KDZ file extraced 12:30:43 : Files were extracted. 12:30:43 : LGMobileDL Load. 12:30:43 : Port = -1 12:30:43 : Connecting to phone 12:30:56 : Check Phone mode = 2 12:30:56 : Phone type check....... 12:30:58 : LGMobileDL.DLL Loading.... 12:30:58 : _SetAuthMark Fail 12:30:58 : _SetAuthMark Ok : wAuthMark(65535) 12:30:58 : _DetachDLL Call 12:30:58 : _DetachDLL Call End 12:30:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10c-ESA-XX-OCT-19-2010+0-DZ.dz 12:30:58 : Param : moduleDir = 12:30:58 : Param : waitTime = 0 12:30:58 : Param : UsbHighSpeed = 1 12:30:58 : Param : PhoneMode = 2 12:30:58 : Param : BinVersion = V10C_00 12:30:58 : Param : AuthMark = 65535 12:30:58 : Call fn_StartUpgrade 12:31:05 : 3GQCT : wParam = 100, lParam = 5001 12:31:05 : Step : Upgrade Error error code = 5001 12:31:05 : ResetStartInfo() Call 12:31:05 : _DetachDLL Call 12:31:05 : _DetachDLL Call End 12:31:06 : FreeLibrary Call 12:31:06 : FreeLibrary Call End 12:31:06 : ResetStartInfo() Call End 12:31:06 : ===FINISHED=== Thanks again for help and swift response! Click to expand... Click to collapse I will upload my version of the update. It worked for me every time. .kdz file you need by your own as it would be to big. 1 way Run automatic offline procedur. In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON " UpTestEX_mod2_marwin run this as admin select emergency instead of DIAG select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it) press on start upgrade. 2 if 1 doesnt work unplug your phone exit windows enabler and https server start windows enabler and https server with admin rights In the right bottom there must be now the windows enabler symbol. click on it. now there should be the letters " ON " UpTestEX_mod2_marwin run this as admin select emergency instead of DIAG select your kdz ( the v10h in the zip is just a link to a local one on my external hdd. I forgot to erase it) press on start upgrade. i hope this works. good luck:good:
Thanks, I will give this a try...
[Q] LG Flash Tool 2014 error in download mode
Coming from rooted (aboot, ...) D405n v10d I tried the Resurrection Remix rom. I flashed with CWM, forgot to wipe data and am stuck in a boot loop now. CWM is gone . The only thing that seems to work is the download mode (Hold Vol+ while plugging in), but it says "USER B100 - ROOTED" below the progress bar. Using the LG Flash Tool 2014 and trying also the original LG Mobile Support Tool I tried to unbrick, but on 4 Different OS (Virtual: XP SP3, Win7 32bit, Win8.1 64bit from modern.ie, Native: Win8.1 64bit) in many tries I always end up with an error after 2% Progress of software upgrade. I found the logfile created by the LGUserCSTool.exe and the last error is always "TYPE_WPARAM_UPGRADE_ERROR". Please help, i'm stuck. Code: 15:41:11 : Start Date : 2015-06-10 15:41:11 15:41:11 : -------- QM_Version mode --------- 15:41:11 : ***** Check Tool Version ***** 15:41:11 : Tool version : 1.7.5.0 15:41:11 : UpgradeDLL version : 2.1.5.5 15:41:11 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client 15:41:11 : LGE USB Driver Version : 15:41:11 : Android PDLV Version : 15:41:11 : Android NDLV Version : 3.14.0.0 15:41:11 : ****************************************** 15:41:11 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder 15:41:11 : SetEmerModeAT() 15:41:11 : _IsConnectedPhone Call 15:41:22 : _IsConnectedPhone(2) 15:41:22 : 0 - NotConnected. 15:41:22 : 1 - Normal connect success 15:41:22 : 2 - Emergency connect success 15:41:22 : *****CheckOS Start******** 15:41:22 : Microsoft_Windows7_Professional_Service Pack 1 15:41:22 : *****CheckPCSyncPrograms Start***** 15:41:23 : PCSyncPrograms Not Found - OK and ready to upgrade 15:41:23 : Überprüfung der Telefonverbindung 15:41:23 : dwWaitResetTime(40000 ms) 15:41:24 : Phone Mode(2) 15:41:24 : *****GetPhoneType Start***** 15:41:24 : Phone Type : CDMA_2CHIP 15:41:24 : *****GetPhoneBinaryVersion Start***** 15:41:24 : Phone Bin Version : D40510D_00 15:41:24 : *****Get ESN / IMEI / MEID Start***** 15:41:24 : ESN/IMEI/MEID : 352763060106678 15:41:26 : Check Backup and Restore model 15:41:26 : Skip Backup and Restore - Emergency mode 15:41:26 : Phone type Compare start 15:41:26 : *****CheckPCSyncPrograms Start***** 15:41:26 : PCSyncPrograms Not Found - OK and ready to upgrade 15:41:27 : ****************CheckAndDownload******************** 15:41:27 : Version : D40520A_00 15:41:27 : !!*****OpenURL Start*****!! 15:41:27 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder 15:41:27 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone 15:41:27 : ==================LJH log1 ==================== 15:41:27 : !!*****OpenURL Start*****!! 15:41:28 : CreateFile : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz 15:41:28 : =============HEADER : Range:bytes=0-===================== 15:41:28 : !!*****OpenURL Start*****!! 15:41:28 : *****DownLoad Start***** (Size:1170880830) 15:47:47 : Receive OK 1170880830/1170880830 15:47:47 : =============TAIL : 1170880830===================== 15:47:47 : Receive Size (1170880830/1170880830) 15:47:47 : *****CheckWebDownError Start***** 15:47:47 : File Error check OK 15:47:51 : ******Extract Start C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz***** 15:47:51 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\) 15:47:51 : Check 2G-4G big size kdz file.. 15:47:52 : Extract 2G-4G big size kdz file.. 15:47:52 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz) 15:47:52 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll) 15:47:52 : Extract End C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz 15:47:52 : 01 Skip delete kdz 1.1 file... 15:47:52 : ------------------Model.dll Information------------------- 15:47:52 : Filename : LGUP_8x10_8x26.dll 15:47:52 : Version : 0.2.45.0 15:47:52 : File size : 1595904 15:47:52 : File date : 2015/06/10-15:47:52 15:47:52 : PC Created date: 2015/06/10-15:47:52 15:47:52 : ---------------------------------------------------------- 15:47:52 : Skip delete kdz 1.1 or later version file... 15:47:55 : *****Check LGCM Programs Start***** 15:47:55 : LGCM Programs Not Found - OK and ready to upgrade 15:47:55 : m_pLGCyonUpdate status change. 15:47:55 : *****WorkModelDLL Start***** 15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz) 15:47:56 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\) 15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll) 15:47:56 : _DetachDLL Call 15:48:01 : _DetachDLL Call End 15:48:01 : Call fn_StartUpgrade 15:48:01 : ********* 2Chip Model.dll input Parameter************* 15:48:01 : MODEL_EVENT : 32769 15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz 15:48:01 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\ 15:48:01 : BootWaitTime : 49500 15:48:01 : UsbHighSpeed : FALSE 15:48:01 : PhoneMode : 2 15:48:01 : NewPhoneBinVersion : D40520A_00 15:48:01 : ClearSI : FALSE 15:48:01 : AuthMark : 0 15:48:01 : ********* 2Chip Model.dll input Parameter End************* 15:48:05 : wParam : 20, lParam = 540 15:48:05 : MODEL DLL Event : (20, 540) 15:48:07 : Model File Count = 540 15:48:07 : wParam : 100, lParam = 51 15:48:07 : MODEL DLL Event : (100, 51) 15:48:07 : Step : TYPE_WPARAM_UPGRADE_ERROR 15:48:07 : CleanModelDll() : Free Model.dll 15:48:07 : _DetachDLL Call 15:48:12 : _DetachDLL Call End 15:48:15 : Page_Error ºÎºÐÀÔ´Ï´Ù 15:48:15 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Hi, I have exactly the same problem. After a long investigate I understand the cause: The phone is a LG L90 D405n but I loaded a D410 bootloader, so the LG Flashtool detects the device as a D410 phone so an error occurs when you try to install a D405n kdz. In your example: Code: 15:41:24 : *****GetPhoneBinaryVersion Start***** [COLOR="Red"][B]15:41:24 : Phone Bin Version : D40510D_00[/B][/COLOR] 15:41:27 : ****************CheckAndDownload******************** [COLOR="SeaGreen"]15:41:27 : Version : D40520A_00[/COLOR] 15:47:55 : *****WorkModelDLL Start***** [COLOR="SeaGreen"]15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz) 15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)[/COLOR] 15:48:01 : ********* 2Chip Model.dll input Parameter************* [COLOR="SeaGreen"]15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz[/COLOR] I loaded a D410 kdz into my D405n phone, the load work using LG Flashtools but the phone turn in a bootloop. Is there a way to force a kdz load into the phone? Or a way to edit the D405n kdz to let the LG flashtools believe that it's a D410 kdz one?
any solution?