Related
Okay, I'm stumped. I'm already getting a replacement device from HTC under warranty so my problem is solved, but like many of you, I HATE NOT HAVING AN EXPLANATION FOR THINGS!
I'm also wondering if anyone else has had this problem? About 10-Days ago my Kaiser (Tilt) stopped charging via the automotive charger. The A-C charger works fine, but the vehicle charger sent to me with my device from AT&T completely stopped charging my device. I went to the AT&T store & bought a new charger, It didn't work. I changed power points, & cigarette lighter in the vehicle &, it wouldn't work. I tried the charger in the vehicle of two different AT&T sales guys & also tried multiple chargers, & it wouldn't work. Is there any reason why the unit would lose it's ability to charge via a vehicle charger while still retaining it's ability to charge through USB to computer & through the A/C home charger? It seems to me that if the charge portion of the MB was fried, then all charging would be affected.
So how can my device charge fine through all means EXCEPT the vehicle charger?
Again, AT&T is sending me a new device, but I hate not having an explanation for the problem, drives me Nucking Futs!!!
Any ideas, anyone?
Thx!
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
It's a known issue, not just with the Tilt
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Jygar said:
I dont want to sound rude but have you checked your power settings?
Under the "Advanced" it has a option for "When device is turned on, do not charge the battery when connected to the PC."
If this is ticked it will not charge via the in car charger.
Click to expand...
Click to collapse
OF COURSE I DID.
Yeah, It charges fine from the PC, & from an A/C source. But the HTC TYTNII car charger that came with my device, as well as replacement car chargers don't work.
wisniak said:
I had the same problem with my Axim X50 and X51v.
The original sync/charge cable wouldn't charge from the car's lighter, while non-branded cables did so without any problems at all.
This happened with other Axims as well, so I know that it wasn't a defective unit.
I then purchased an HP Ipaq HW6910, and encountered the same issue with my wife's Mazda 5 - the HW6910 woudn't charge if the cable was connected to the charger, when I started the car. It only worked if the adapter and cable were disconnected while staring the car. This did not happen with my Mazda 3 or my Mitsubishi.
And another thing I discovered, is that some cables are not designed for use with car chargers, but they work perfectly with AC chargers.
I bought a couple of retracting sync/charge cables for my HW6910, they worked only when connected to the mains. But regular cables worked perfectly with both power sources.
Click to expand...
Click to collapse
Funny, I just ran out to the truck & grabbed one of the guys Blackberry chargers & it looked like it was working. But SK Tools reports an even bigger (negative) amp draw (like discharging twice the normal rate). So with the BB charger it dischages even faster. Maybe reversed polarity Guess I should've checked first. That's a moot point now though as I await my new unit. Weird though.
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
wassup, i`m in SF Cali, I had a att 8525 that was doing the same thing. I assumed it was the phone when it 1st started happening. After a week or so it was bothering me so i started playing with it trying to figure out if it was a setting, bad flash, or hardware. I noticed that if the phone was off it wood charge but not if it was on. I started flashing my phone and testing (for trouble shooting purposes) and for the first 2 or 3 roms problem still existed, then one of the roms i flashed to would turn on the back light as if it was charging but no LED or charge, when this started happening I realized that if i turned my fone off it wood start charging and continue to charge when i booted the fone back up. So if when i got in the car i pluged in/ shutdown/ waited like 45 sec or 1 min. / then booted it would temp. fix the problem for as long as my fone was on the cable. At some point after that many weeks/roms later i noticed it was working correctly again, So I had decided it was a glitch in the rom, But i`m not a Dev. or fone guru so I really dont know what it was, but hope this helps someone.... PEACE!! ~bboyphrog1~beatz`n pieces krooh~
flexte said:
Well i was using a BB charger that worked fine up until this morning. i bought my phone when it first came out so it wasnt easy to find a charger made for it at the time. i never had a problem until today. i also noticed that the Usb terminal on my device was bent. i called htc but they charge way too much to fix it. i have no idea how or when the terminal broke but it does still charge when pluged into pc or into the wall. ill have to spend $80 to have ppctechs fix it.
Click to expand...
Click to collapse
The slight diagonal slant on the bottom right? It's supposed to be like that. All AT&T Tilts (and I'd assume TyTN II's, but I've never had one to compare) have a mini-usb port that looks that way.
i looked at a 8525 and the usb terminal was straight. i even took a pencil and straightened mine out. it should be bent. that wouldn't make sense because the charges slot is not bent. i think the problem is that one side of the terminal is not soldered to the board and can easily be broken. in another thread 3 people have the same issue. as far as the car charger goes ill do some testing but until today it was charging fine while the phone was on.
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
I've had the same problem. I went to the lcoal AT&T store and they said they never heard of it so I thought it was just me. It looks like many of you have the issue. I wish I knew what it was. It was really bad with my 8525,
i thought Faria developed a cab to fix this issue in the hermes forum? might be worth having a search for it and when i get home i will see if i have a copy on my pc.
any of you guys get anywhere with this? I have exactly the same problem. posted in a couple of other threads actually.
Not sure whether the usb port is damaged, but it's certainly is slightly "down" on the right hand side.
It charges perfectly on the mains and perfectly from usb, but not in the car.
I have used a normal car charger, spent £50 on a Carcomm powered mount and tried one of the separate chargers that you plug the standard mini usb cable into. Nothing works. This is driving me crazy (if you'll excuse the pun!) a the primary reason I bought the Kaiser, was for GPS.
Thanks
well i also just found out 2 of my minisync cables dont work anymore. 1 of them still charges the phone but neither of them sync the phone anymore. it still syncs fine through a normal usb cable.
I am using a moto Razr car charger and it works fine so far.
Okay, confirmed on my replacement Tilt: The USB port is arrow straight. Someone earlier mentioned it being lower on the right side & indeed my DEAD DEVICE was as such. Looks like a bad job of connecting the port to the device.
NOTE!!!!!!
It's a good idea to take a look at your charger before you plug it in to make sure the charger USB connector is not bent or mi-sshappened.
i have the same problem i went through 4 att car chargers adn 5 phones. They are crap. Its not the phone its the charger if you play with it you will see that it comes and goes. The end tip on the charger is bad doesnt make a good connection. i have yet to find a good car charger.
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
faria said:
this issue is known ,it even happens with the htc tynt.... by simlpy rebooting while in the charger it starts working again ..at least with mine.
Click to expand...
Click to collapse
that didnt work for me. only one of my chargers work now.
RSVRover said:
Mine stopped charging using the car charger supplied and a brodit. A friend's kaiser charges OK with the same chargers.
No-one has mentioned it in this thread, but my phone, shows "charging" in the battery control panel and the LED lights up to confirm this. The percentage charge value decreases as though it isn't being charged!
As others have done I noticed that the corner of the plastic centre of the connector nearest the reset hole was slightly bent and I assume (though can't remember doing so) that I missed the reset hole with the stylus tip and pushed it in. Menu driven resets for me from now on!
HTC Europe didn't know anything about this fault, so seem to be happy to repair / replace it under warranty. It's with them at the moment, so I'll have to wait and see.
RSVRover
Click to expand...
Click to collapse
Please let me know the outcome. mine is getting worse by the day.
Now I'm confused.
Because the device charges over USB I just assumed it would draw <500mA (the max output of a USB port) but the specs say it draws up to one amp.
Having owned a high-drawing device before (Axim x50v) I know that trying to pull this out of a USB port can blow your motherboard. So are these safe to charge over USB??? How does the device know whether its being charged over USB or mains - are there different charging pins on the connector?
Hi guys, I have a samsung galaxy s vibrant from bell, and lately I have not been able to use my phone while charging. My phone lags and does not respond when i try to unlock the phone to go to the main screen.If I want to make phone calls and while charging the phone i would have to dial the number first then plug in my charger. But once its plugged in the touch screen does not respond at all. please hellp!! I;ve tried deleting apps to see if i have downloaded anything that may have caused it but it hasnt worked. I tried soft reseting, taking the battery out. So far nothing has worked. Any one else with the same problem?
Same Problem
I have the same problem with my Samsung Vibrant....I don't see the same problem with my usb to wall-outlet charger....however, the touch screen freezes up when I use a third party charger. Please help.
I have noticed this too. Anyone smart why this happens? Its not just galaxy s phones btw.
Noticed the same problem. While charging, the Touch screen doesn't work. Especially while using Swype, the Line is jagged.
....and automatic PIN
I have exactly the same problem (i9000, Sweden, 2.1 update 1). Unfortunately I did not think of the charger so I kept removing the battery
When connected to the charger when starting the phone and I have many pictures or video files on my memory card, the text "media scanning" and "media scanning finished" (or something like that) keeps repeating in the system info. When the PIN code windows appears, numbers are being highlighted quite randomly. Sometimes the "ok" button is indicated as well, so sometimes I have been forced to use my PUK code because all 3 PIN code tries had been done with noone actually touching the phone
Again, without the charger (and/or many media files) it works.
Maybe froyo could help
I am on 2.2 Froyo and it still happens for me.
Same problem with Froyo JPO!!
Problem with Selective devices or all the devices are having the same issue?
We need more confirmations.
thats because third party chargers have different voltage and charge that will affect your capacitive touchscreen. HTC chargers are recommended, since they are also touch screen based phones.
just searched for this problem and solved it immedieatly thanks to hoopjunkie's comments
i've 2 chargers,
the one came with the phone has output 5.00V 0.7A
one claiming to be samsung has output 4.75V 0.4A
I had never used the phone while in charge so never experienced this issue until 5mins ago
for some reason i was using the "fake" one since.
lesson learned check the voltage values, which i normally do, but trusting too much to the sellers got me.
ow and for the record I'm on froyo 2.2 i9000xxjpc
I am using the Stock charger. Same problem even with the USB Charging.
i wonder if theres a solution to this issue?
i am really getting tired of this problem -- i am using a nokia n97 charger.
i want to be able to download stuff from the market while the device is plugged in.
cylent said:
i wonder if theres a solution to this issue?
i am really getting tired of this problem -- i am using a nokia n97 charger.
i want to be able to download stuff from the market while the device is plugged in.
Click to expand...
Click to collapse
dump the nokia charger and get a genuine galaxy one
Hi, I got the same problem: no touchscreen when connected to USB of my laptop. I already noticed my phone acted weird next to my laptop. Once I ejected my cd-player the touchscreen worked again! So the electronics in the cd-player interfered with the touchscreen.
I've got a Rogers Captivate running 2.2 and I am having this same problem... it only seems to happen since the upgrade. This is using the stock charger and USB. Are there any possible solutions to this?
Same happens for my Samsung Galaxy S while charging from the stock wall charger. But the touchscreen works perfectly fine while charging from a PC's USB port using stock microUSB cable.
I think the problem lies with the charging current. The electrical field generated around the charger's wire due to a 500 mA (5 V) charging current supplied by PC's USB port seems to be doing no harm, while the 700 mA (5 V) charging current of the stock wall charger seems to be generating an electrical field high enough to confuse the capacitive sensors of the touchscreen. Perhaps the usage of a shielding core -- just like on the stock microUSB cable -- on the stock wall charger would help in negating the ill effects of the electrical field generated by a 700 mA charging current, but I'm not sure.
Anyway, my current workaround for the problem is obviously to charge from a PC's USB port. When a PC is not around or not switched on, I'm using a 5V, 500mA charger which was bundled with my iTech bluetooth headset. Obviously, both these methods have a shortcoming, that is slow charging compared to that of the stock wall charger. In my experience, this is a problem only when I use my phone for Wi-Fi tethering, in which case the battery capacity percentage continues to drop even when connected to a 500 mA charger. The positive side of 500 mA charging is that it gives a slighly better service life for the battery.
Same problem here, send my SGS to samsung and problema solved new display and display circuit its a know issue with some SGS's
Nook color acts up when hooked up to charger. The keyboard doesnt work it constantly jumbles letter, but once i unplug it works. Weird. I used the auto nooter from 12 days ago from gabriel. It works fine, just that when plugged in it acts up
deolarte said:
Nook color acts up when hooked up to charger. The keyboard doesnt work it constantly jumbles letter, but once i unplug it works. Weird. I used the auto nooter from 12 days ago from gabriel. It works fine, just that when plugged in it acts up
Click to expand...
Click to collapse
Same here. Wanted to see if anyone else saw this problem before rooting, though it really seems like a hardware issue.
starkruzr said:
Same here. Wanted to see if anyone else saw this problem before rooting, though it really seems like a hardware issue.
Click to expand...
Click to collapse
Definitely a hardware issue. I saw a long thread on a B&N forum (at least that's what it looked like) where people were all having the same problem.
oh I looked didnt find, any news on a fix by anychance, I mean its not such a big problem, but it freaked me out the first time. lol
its the charger, atleast that is the part that is replacable and corrects the issue.
I replaced my charger with a scosche revive II charger that is intended as an ipad charger with 2 usb ports, 1 at 2.1A and 1 at 1A so I can charge the nC and an iphone too.
Either the NC is susceptible to noise from the cahrger or the charger is really badly designed or both, but after the swap there has been no further issues.
Charger sells for 17-25 in the us, and is a quality built product.
Got an NC for Christmas and after reading all the awesome help on here got it rooted and set up the way I wanted it. So I plug it in night before last and it wont charge. Had to hold it at a certain angle then when I let go it would quit. I call B&N and they were gonna send me a cable. I said no the port is bad and I tried another usb cable and got the same result. So they are sending me another NC should be here tomorrow. I had barely 20% battery when I restored it to stock (which they told me to do before sending it back) or I would have been screwed. Anyone else had his problem? Also she told at first that another USB cable wouldn't work on it?? Anyone else use another cable or phone charger?
Thanks again for all the great info on here!!
All I know is that the mini-usb port on my NC -- where the charging cable plugs in -- is a mess. I have to insert the plug at a sharp angle and wiggle/force it, before it will go all the way into the port. (lame!)
On another note, the black plastic around the larger USB plug at the other end of the cable fell apart completely on the second day I had the NC. That end of the cable is now being held together by electrical tape. (even more lame!)
I'm considering an RMA for the entire unit to try my luck with a new one...
PS: performance wise, once rooted, this thing kicks total ass for $250!
Yeah, once mine is plugged in if I push the cable around it will stop charging.
I wonder if that Tear down gave us a reason for this?
After reading lots of posts over the past months it seems the port/plug is the most often reported problem .. I have two units and one (the first) is just fine, the other had difficulty with plug insertion but once inserted was fine. I tried the plug from #2 on #1 and yup, it was a problem to insert, so perhaps the B&N supplied cable is the problematic part, not the NC itself?
Saw that the EU has/will 'standardize' on the uUSB for charging .. personally don't understand ... it can't make that much difference in design/mfg and the miniUSB is very much more preferable to me .. sturdier it seems ... but it is what it is and I still love my NC!!!!
Patmos00 said:
Got an NC for Christmas and after reading all the awesome help on here got it rooted and set up the way I wanted it. So I plug it in night before last and it wont charge. Had to hold it at a certain angle then when I let go it would quit. I call B&N and they were gonna send me a cable. I said no the port is bad and I tried another usb cable and got the same result. So they are sending me another NC should be here tomorrow. I had barely 20% battery when I restored it to stock (which they told me to do before sending it back) or I would have been screwed. Anyone else had his problem? Also she told at first that another USB cable wouldn't work on it?? Anyone else use another cable or phone charger?
Thanks again for all the great info on here!!
Click to expand...
Click to collapse
NC #1 that I got last Thursday had a fault USB port, as in I had a b!tch of a time getting the USB cable inserted, but managed it twice on Thursday for initial charge and a second time to try something sideloaded from Calibre. (Actually was about to return it as soon as I got it home and had trouble with the cable insertion until just as I was about to give up and pack it up, the cable went in...)
The next morning no amount of fiddling would allow me to insert the cable, so I factory reset and went back to the B&N for a horrid cs experience before they finally deigned to replace it. NC #2 the cable inserts MUCH more readily into...
Crossing fingers that nothing else goes wrong with #2. Ended up giving up on a pushed 1.01 update and sideloaded it last night, but first try was a phail, 2nd try went as expected. They need a user fw check and initiate fw update app as their OTA doesn't seem to be very robust or even work AFAICT.
cutterjohn said:
NC #1 that I got last Thursday had a fault USB port, as in I had a b!tch of a time getting the USB cable inserted, but managed it twice on Thursday for initial charge and a second time to try something sideloaded from Calibre. (Actually was about to return it as soon as I got it home and had trouble with the cable insertion until just as I was about to give up and pack it up, the cable went in...)
The next morning no amount of fiddling would allow me to insert the cable, so I factory reset and went back to the B&N for a horrid cs experience before they finally deigned to replace it. NC #2 the cable inserts MUCH more readily into...
Crossing fingers that nothing else goes wrong with #2. Ended up giving up on a pushed 1.01 update and sideloaded it last night, but first try was a phail, 2nd try went as expected. They need a user fw check and initiate fw update app as their OTA doesn't seem to be very robust or even work AFAICT.
Click to expand...
Click to collapse
Sounds like the charging port is a piece of crap. Still love the NC but I dread everytime I have to plug it in to charge it. Also when I plug it in to the computer or the wall the screen goes crazy and is virtually unusable. Read a few cases on here but no real explanation as to why.
As far as the update. Had to sideload it on both of the NC's i have had. Never would push it to it. Strange.
My first NC had a bad charging port. I returned it immediately. The second is fine.
sent from my NookColor
gmanvbva said:
My first NC had a bad charging port. I returned it immediately. The second is fine.
sent from my NookColor
Click to expand...
Click to collapse
Does your screen act up when plugged in? Mine does either plugged in the wall or the computer. Just curious how many people have this issue??
I haven't returned mine. The cable that comes with it is difficult to insert, but if I fiddle with it, it goes in. I have a generic cable that I use to connect it to my PC and it charges it, too. It may be slower and doesn't indicate that it is charging, but if I leave it plugged in all night, it is fully charged in the morning.
zdrifter said:
Saw that the EU has/will 'standardize' on the uUSB for charging .. personally don't understand ... it can't make that much difference in design/mfg and the miniUSB is very much more preferable to me .. sturdier it seems ... but it is what it is and I still love my NC!!!!
Click to expand...
Click to collapse
You do realize the NC (and most phones) uses MicroUSB, right? And actually MicroUSB is rated for more insertions and is sturdier.
The reason the NC's cable is a PITA is because it's not a standard MicroUSB, it has extra pins on each side to deliver the 1.9A of current that the NC charges at.
gmanvbva said:
My first NC had a bad charging port. I returned it immediately. The second is fine.
sent from my NookColor
Click to expand...
Click to collapse
ignore bad post
Patmos00 said:
Does your screen act up when plugged in? Mine does either plugged in the wall or the computer. Just curious how many people have this issue??
Click to expand...
Click to collapse
Mine double enters characters when on the charger
khaytsus said:
You do realize the NC (and most phones) uses MicroUSB, right? And actually MicroUSB is rated for more insertions and is sturdier.
The reason the NC's cable is a PITA is because it's not a standard MicroUSB, it has extra pins on each side to deliver the 1.9A of current that the NC charges at.
Click to expand...
Click to collapse
Great info. What I was wondering about. One question....will it hurt the NC port to use a standard micro usb cable to charge or connect to the computer?? I did on my first one and thought that may have been the reason it went bad.
Patmos00 said:
Great info. What I was wondering about. One question....will it hurt the NC port to use a standard micro usb cable to charge or connect to the computer?? I did on my first one and thought that may have been the reason it went bad.
Click to expand...
Click to collapse
I would not think so, in fact if that were the case I'd hope B&N would have had the jack not fit normal MicroUSB cables, but who knows.
Also B&N knows users aren't going to unplug the cable from their charger and plug it into their computer.. At least a reasonable number of users won't do this, although I might be the exception having a MiniUSB and MicroUSB dangling out from under my monitor for plugging in stuff
I've plugged mine into my computer numerous times, no problems so far. It does charge from any USB source, albeit slow.
On the new one. No.
Patmos00 said:
Does your screen act up when plugged in? Mine does either plugged in the wall or the computer. Just curious how many people have this issue??
Click to expand...
Click to collapse
sent from my NookColor
Patmos00 said:
Does your screen act up when plugged in? Mine does either plugged in the wall or the computer. Just curious how many people have this issue??
Click to expand...
Click to collapse
Yep. #2 has that problem while #1 did not. I notice it on #2 as soon as I had gotten home and had it charging and was trying to do the setup/registration... It was an exercise in frustration...
I'm going to be letting #2 discharge today, then do a full charge and carefully track how much time I get off the charge since I've read a battery runtime thread on the B&N forums. (Very low backlight & WiFi off.) Might need to return #2 for battery problems as it seems very short to me although I have not been keeping careful track of how long I've been running between charges...
cutterjohn said:
Yep. #2 has that problem while #1 did not. I notice it on #2 as soon as I had gotten home and had it charging and was trying to do the setup/registration... It was an exercise in frustration...
I'm going to be letting #2 discharge today, then do a full charge and carefully track how much time I get off the charge since I've read a battery runtime thread on the B&N forums. (Very low backlight & WiFi off.) Might need to return #2 for battery problems as it seems very short to me although I have not been keeping careful track of how long I've been running between charges...
Click to expand...
Click to collapse
It is very frustrating! Guess will just have to quit using while charging. About the battery, are these like the new phones where you can just charge them each night? I do this on my Droid X just wondering if it would hurt these batteries?
jerrykur said:
Mine double enters characters when on the charger
Click to expand...
Click to collapse
I have this problem. I believe this is caused by the AC adapter. I went to my local B&N and hooked up my nook to their charger and had no problems. I called B&N support and explained the problem to them. They said they would send me a new AC adapter which should have arrived yesterday. It hasn't arrived yet but I think that should fix the problem.
I also have a problem with having to insert the micro usb in at a funny angle, but once in it charges.
vagabondv said:
I have this problem. I believe this is caused by the AC adapter. I went to my local B&N and hooked up my nook to their charger and had no problems. I called B&N support and explained the problem to them. They said they would send me a new AC adapter which should have arrived yesterday. It hasn't arrived yet but I think that should fix the problem.
I also have a problem with having to insert the micro usb in at a funny angle, but once in it charges.
Click to expand...
Click to collapse
Think I will call them as well. Just to calm my OCD.
Yeah I have insert my USB at an angle as well. Once there though it is fine.
Would like to know about the battery though as I stated in a post above.
My sister bought one on Monday with a bad port. She took it back and got a new one.
BTW - My sister so liked my rooted Nook she went and bought one. She came straight to my house to have me root and install apps.
Hello,
I got an issue, that i can't solve, and i wanted to know if anybody here got it, and in case there's a solution for that.
whenever i plug my LG2X running CM7 RC2 to my car charger, after few minutes the headset icon appears, and the device "thinks" that a headset was connected to it, therefore I can't hear GPS instructions etc'
when using the home charger, there are no problems
I'm running Cyanogen 7.1
Any ideas or solutions?
Thanks
Guy
I would try changing the brand of the charger if it's not an LG and do tests with other's car chargers. I assume it doesn't happens with the regular charger.
Just a thought. I had a Captivate do the same thing, & it turned out to be crud in the cable end. Try compressed air in the cable end & charging port on your phone. If not, ditch the charger/cable before it fries the phone.
Hope it helps!
Sent from my SAMSUNG-SGH-I727 using XDA
Thank you both,
I have tried switching charger. That was actually the first thing i did before posting this.
however, it does not help. The problem is general to car charging.
It is not related to my car, as i had the same issue with other cars, and other chargers.
this seems to be a software problem.
Guy
perhaps an app like https://play.google.com/store/apps/details?id=com.dwalkes.android.toggleheadset2 might help?
One thing's for sure; you're getting stray resistance in the charge port. Id still remove battery & find a non-metallic object to "gently" clean the contacts where the charger plugs in.
I accidentally got crud in my cord, but didn't realize it till the phone started going into download mode using this certain one. It was cool till it fried the phone ...
Sent from my SAMSUNG-SGH-I727 using XDA
if warranty = true
then goto return_device
Thanks,
Tried it, didn't work, same problem.