Related
Hi there!
Recently I've been trying to upgrade my SGS with a custom ROM, Darky's 4.0. After installing the ROM as instructed (using CWM and copying the ROM to the internal SD card), the ROM Installs, after the 1st boot it keeps looping, see video:
http://www.youtube.com/watch?v=kWrijyv-8PM (not edited, sorry for that)
Original SGS:
GT-I9000T
I9000TUBJG7
Product code: GT-I9000HKTPCW
kernel: 2.6.28
Build: eclair.ubjg5
The first upgrade I made was via Kies reg-hack to: GT-I9000HKDXEU, 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3, and it installed Stock Froyo update. The SGS worked fine with exception of the radio, which didn't lock my 3G over the 850 band.
Currently:
9000M running STOCK Australian I9000UGJG8 (due to radio issues, besides the Canadian ROM, this is pretty much the only ROM which modem.bin's works properly with my network, 3G 850MHz).
FW:2.1-update1
Kernel 2.3.29 [email protected] #2
Eclair.UGJG8
I tried with the following STOCK ROMs prior to the custom ROM install: I9000XWJM1, I9000XWJG5, I9000XWJM9 and I9000UGJH2.
I have ALLWAYS made an SD unmount and format, formatted the cache and factory reset. After it loops, the only way to get it back is using downloader mode and installing a STOCK ROM via ODIN (always do a .512 pit repartition)
Any suggestions to make this SGS get the ROM? maybe the kernel is bad?
Cheers!
Have u tried to format everything (exept for sd) and flash again?
Btw i love infected
Sent from my GT-I9000 using Tapatalk
Format everything? Using which app or program?
I've always used the recovery's wipe commands and the *2767*3855# command. Is that enough? or am I missing another cooler and invasive method ? A friend has suggested to use davlik.
Yeah! Infected rulz, that's what I listen when I'm in the bricking-mood lol
As i saw you have cwm installed... Boot in recovery and select mount and storrage and then select eveeything that contains format (boot wont work to format) and dont select format internal sd but DO select format sd-ext
Edit: if it doesnt work write again then ill upload u the kernel that fixed it for me yesterday. Its from this forum but since ive discovered it by coinsidence, i cant remember how its called. U can format everything then select mout usb storrage (in cwm) and push it on the root of sd. Its an update.zip
Sent from my GT-I9000 using Tapatalk
shrooms90 said:
As i saw you have cwm installed... Boot in recovery and select mount and storrage and then select eveeything that contains format (boot wont work to format) and dont select format internal sd but DO select format sd-ext
Edit: if it doesnt work write again then ill upload u the kernel that fixed it for me yesterday. Its from this forum but since ive discovered it by coinsidence, i cant remember how its called. U can format everything then select mout usb storrage (in cwm) and push it on the root of sd. Its an update.zip
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I gave that a shot, still no cigar. I guess that it goes deeper than just a formatting... maybe that secret kernel u have might brick me... erhm! I mean help me
Shoot! and I'll try it.... this OEM sucky ROM aint working that good over the Australian ROM lol. now I lost access to my cam ! sucks.
Thanx!
Try any universal lagfix kernel with clockwork enabled. Since ur phone is still flashable and ur phone still has funktionality (cwm works) im pretty hopefull that it is software/sd format related. Thats one of those cases where servic centre sais a full flash is needed by now only they are able to do that:-( but till now i always found a way to work around that by trying everything in every way. I always thought my phone is bricked anyhow so it can just get better and by coincidence it worked all of a sudden
Sent from my GT-I9000 using Tapatalk
Ihave I900T with same rom image
and am trying to upgrade to FROYO as well. Any advice on how to do so would be appreciated. Tried the various registry hacks and none have worked. I'm happy to use Odin but not sure which is the correct ROM image to use (from samfirmware). Thanks!
zevrosenthal said:
and am trying to upgrade to FROYO as well. Any advice on how to do so would be appreciated. Tried the various registry hacks and none have worked. I'm happy to use Odin but not sure which is the correct ROM image to use (from samfirmware). Thanks!
Click to expand...
Click to collapse
Well, first thing is first. I've been a couple of weeks away from my SGS tweaking. I'm right know figuring a way to make a backup of my ROM (non-nandroid), in which I can extract the Kernel, Modem and CSC (I received a brand-new unit from my provider, so I will take advantage of it )
That way I can flash them back in case of a screw-up. I didn't have that much luck with modems offered in other ROMs, so I need to keep an OEM copy of my stuff.
Also make a good copy of your /efs folder in case you mess it up. It took me around 3 weeks of reading before I started making any changes to my phone, so I'll recommend doing the same; there's no "quick-start" or quickguide on how to start. You will en up with 6 different windows open reading from everywhere
The FWs from samfw are OEMs. Theres like "not much" of improvemente if you switch to those. Take special attention to the one you chose cause most likely you will lose your 3G and/or 850MHz band. I recommend using only Australian and Canadian ROMs(I9000UGJG8 and I9000UGJH2 worked for me, you might try also I9000UGJK3). Regarding custom ROMs, you will need to try and try until you get it right as our SGS model is not the most popular. This means endless flashing
Cheers.
Sgs froyo flash nam bands
Thanks for the advice. This project consumed my thanksgiving but I finally got a good working SGS in the ATT network. I bought an unlocked SGS from Negri Electronics with the USA 3G bands but it came without FROYO and didn't have the 3 button restore available. After reading and reading (your note about multiple open windows at the same time is all too true!) and trying and trying, I was finally able to get to download mode by installing all the Android SDK tools onto my PC then going in by way of ADB. Far more complicated than a simple registry hack and ODIN but it worked.
I installed the DOC BUJP8 v9 ROM with all the enhancements and AOSP Email (I tried and tried to get stock FROYO email to work with 2 exchange accounts but it was impossibly slow and didn't work) while AOSP is working fine.
It seems, because my SGS had the 850 bands to begin with, that it's working fine. I found this other post on XDA (#770041) that had some keycodes I was able to use (*#2263#) and confirm I still have the 850 band.
Needless to say, make a good backup and be prepared - as already warned - to flash several times and it was ultimately a "trial and error" process that worked.
does anyone have the original brazilian/latinamerican i9000T firmware? I flashed the SGS I got from Negri with spike speedy and it looks like I lost my 850 3G band.
I never did find out how to totally back up the SGS as in back up each PDA, PHONE, and CSC file so as to be able to truly factory default it.
Got my phone (AT&T Captivate, firmware 2.1-update1 version JH7, kernel 2.6.29, build eclair.UCJH7) on december 28 from a AT&T store (it even came with a pic taken december 20 ) and I've already been able to boot into download mode (power off, hold volume keys then plug usb) and into that menu used to install packages (power off, hold volume keys then power on). Guess my hardware and firmware are ok, so I may be able to recover my phone by myself in case things go south.
I've been doing my homework lately (been reading stickys, tutorials and faqs for 10 days) but I'm still confused about some procedures. I'm not going to list everything I've read here, but I would like someone to correct me if I've learnt wrong. I don't really need the easiest methods, I want to understand the options available and to choose the best ones (aka the hardest path).
First of all, it seems I need to root my phone in order to be able to create backups, carrier-unlock it and flash custom roms. But it doesn't make much sense to me, since rooting it seem to be enough to prevent it from receiving FOTA updates - and I want to make the most comprehensive backup possible, in such a way I could restore my phone to 'factory condition' if needed.
Second, I realize there are many ways, programs and guides to root the phone - the most famous ones, One-Click root/unroot and z4root, seem to be listed in the wiki (http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897), but there is also CLShortFuse's One-Click Root and Allow Non-Market Apps, which sounds interesting but I don't know if it is undo-able. So there are different ways to root the phone, but there is little to none information on what's the difference between these methods, which is 'better' and what difference does it make if I root it permanently or by some reversible method. Does it affect performance? How each of them work? I have no clue.
The mess gets even greater when it comes to creating backups. People mention different programs to make these backups (clockwork recovery, titanium backup) but I don't understand if they back up different parts of the phone. Some even seem to change the bootloader of the phone - shouldn't it be backed up prior to any modification? Do I flash these backups using Odin? Which programs should I use to have a full backup? Is there anything left I should back up manually?
I'll quit talking for now because I've already written a lot and I still have many questions; if I write all of them at once, no one will ever have the patience to read them.
Erk, a long post deserves a long answer
So first off, il tell you about recovering your phone. Since you just got it, you can go back to the store and play dumb to get a new one in case anything goes wrong. You can also use the 3 button combos to get into download mode and use odins back to stock to get back to your original 2.1 eclair firmware . To do that you would need to get into download mode. Now there are a couple ways to do this, and i can only explain two since ive actually used two. (Well 3 actually, but il get to the third after these 2)
The first method is using the 3 button combo which you should already know. The second method is using adb commands such as (adb shell, adb reboot download, adb reboot recovery, adb devices). The third way is building a jig. Thats basically connecting 301k 1/4 watt worth of resistors together and placing them on pin 4 and 5 on your micro usb slot. You can read more about that on the tutorial on how to build a jig for your phone.
To restore to your factory setting, odin's one click back to stock thing should do the job. It simple installs the stock 2.1 eclair all over again (without the root).
To root your phone, any method from the wiki should work. None of them are really "better" :S, they all do the same job and give you super user permissions. None of them root your permanently since you can always go back to stock using Odin's... It does not really affect performance, not to any extent i have noticed :S, and unfortunately, i dont really know how it works.
As for creating backups, Titanium Backup is the best solution. Whether you have the few extra bucks to spend for the premium one or simply want to use the free one, its one of the best tools out there. I personally use it and its one of the best. It backs up all the data (except for my text messages). It creates a folder on your internal memory which you can just copy to your desktop. When the time comes that you need to restore your backup, just copy the folder back into your internal memory, load up titanium backup. Restore it and voila .
I think ive answered everything, if ive missed anything, let me know
Edit : Forgot to mention this . If your truly interested in customization. Custom roms are the best there is a howto in the themes and apps section on how to install it. It comes pre-rooted (if that is the word to use :S) and theyre much better than the stock firmware. Im currently using serendipity v3.0 (flashed it yesterday)
supaphreek, guess I'll have to thank you twice: once for reading my enormous post, and again for you supacompleteanswer.
I'm being paranoid with recovery because I actually bought the phone in the US then came back to my country (Brazil), so I'm a few thousand miles away from the simple lets-return-this-thing solution.
From everything I've read, I believe the most instructive were the wiki at http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897 , the FAQ at http://forum.xda-developers.com/showthread.php?t=858765 , the PDF guide from user nbs11 at http://forum.xda-developers.com/showthread.php?t=761819 and the wiki at http://www.capfaq.com/w/FAQ. These contain most of the info a newbie user would ever need and I'd definitely recommend them to any newbie user who happen to be reading this. And for everyone afraid of bricking, it's a tremendous relief to know pretty much any mess you do can be reverted using download mode and Odin, so the first thing to test is if you can get into download mode using one of the ways described by our buddy supaphreek.
On the rooting matter, I found no discussion at all about which is better, so they should be pretty similar (though I have no idea which is the oldest version, I'd assume the recent ones might be a little improved). There is some discussion on what's the better lagfix and many of the cooked ROMs already come with some lagfix installed, but this is another story...
Once I get my phone rooted, it seems to be trivial to carrier-unlock it. There's even an app on android market for this, so I won't even need sideloading. Since all this procedure does is just give me a number, there's hardly any difference among all the unlocking procedures out there.
For the backup, I'll still do it using both titanium and clockwork, as suggested by nbs11 on the pdf I've linked on this post. Better safe than sorry, right?
And yes, I'm truly interested in customization and I'll go deep down that path, I'm just packing up my head with some knowledge to avoid being desperate if things eventually go fubar.
As a last question, is there somewhere I can get 1-click Odin with my exact firmware version? (2.1-update1, I897UCJH7, Kernel 2.6.29 [email protected] #2, build eclair.ucjh7) And how important is it to get the exact same firmware?
As I've done my research, I found 1-click odin with JF6 here: http://forum.xda-developers.com/showthread.php?t=731989
I've also found the 'standalone' I897UCJH7 on this topic (where this guy even flashed succesfully his phone using old JH2 firmware without problems, so finding the exact firmware version might not be the greatest issue): http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 but this process is a bit more complicated and uses regular Odin and clockwork recovery. Nonetheless, from what I've understood, I can still use any old version of odin to flash JF6 then use my own clockwork backup, right?
Hmm, unfortunately, im not sure if there is a specific Odin for that firmware :S. However what you can do is use one that reverts you to any stock version, and then flash the version you want through clockwork mod
I'll do that. Thanks again!
Also if you one click to stock, you can OTA update to the most recent firnware. I suggest titanium premium if you are going to flash a lot of custom roms, it is a lot faster to restore and also syncs with dropbox
Sent from my SAMSUNG-SGH-I897 using XDA App
Be careful trying to flash with odin. Some newer builds get instabrick flashing back to jf6 and must go with jh2 or newer.
So, you may want to invest a few bucks in a jig setup before blindly using odin.
Thanks for the tip, sixstringsg.
Newter55, as my phone is brand new I believe I may have one of these insta-brickable devices. If I happen to try flashing it with a recent rom, does it get recoverably bricked (fixed by flashing an older rom), or I'm left with a $500 paperweight?
You just need to use the correct firmware version of odin if you manage to get in trouble. Many people flash rom over rom, including myself, but it is highly likely that at some point you will need odin if you are flashing roms so it is best to ensure that you have that set up first. Look for the odin thread by c3popl (sp?) in development forum and you should find what you need. Read through that and look for others with your base firmware. Or look through q&a at the "help I bricked" threads . On my phone and posting links is a pita or I would make it easy for you.
If your phone came with JH7, follow this guide:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
If you use one of the Odin one-clicks and brick your phone, you'll need a USB jig to recover.
You guys are awesome. Thank you newter55 and GGXtreme for this info! I hope I'll never need it, but I'll buy a cable and make a jig.
The news: I've rooted my phone using One Click Root / Unroot by TGA_Gunnman (for the record: it worked with my JH7 Captivate bought in 28 dec). Once I booted windows, installed dotnet framework 4 and the samsung drivers (easy too, but a pita), rooting was easy and failproof. However, someone using linux might find it easier to just download 1-click root, find the root.zip file in there, rename it as update.zip, put the zip in the internal sdcard, boot the phone holding the volume buttons and then 'install packages'. This way there will be no need to fight Wine nor install anything nor look for a windows computer with admin privileges.
Also unlocked my phone using SGS Unlock Tool, available in the Android Market. The unrooted option won't work, but once rooted it worked like a champ. Next step: I'll do the backups, and then... start messing up my new toy!
Hello people !
Since I'm living in Tokyo, I'm the happy owner of a Galaxy S, but unfortunately it doesn't seem to be exactly the same like the other devices.
Anyway, since 2 days ago, I had some fun (and cold sweat also) trying to root it, unbloat it, etc... Some difficulties and questions left without answers, so if anyone has a guess, please be my guest !
My phone as I got it :
SC-02B, with OMJJ1 firmware (Froyo 2.2)
1) Rooting
The easiest thing ever.
The SuperOneClick pack did a wonderful job.
http://forum.xda-developers.com/showthread.php?t=803682
2) Getting a "safe" firmware
Just in case anything would go wrong, I wanted to be able to flash back to an official firmware.
The ones from this post work without any problem so far.
http://forum.xda-developers.com/showpost.php?p=10558974&postcount=134
However, problem 1 : I couldn't get Heimdall flash my device. Since I'm mainly working on Linux and OSX, that would have been of a great help.
But the "handshaking with Loke" step is always failing...
Actually, I even though I had bricked the phone, since I was stucked with a black screen (1PC and 1GSM in orange) and it took me ages to figure out how to get rid of that.
Solution : get myself a Win 7 computer at office and use Odin. No problem so far with this one.
Problem 2 :after flashing with the official update, I get complains in the recovery mode (when unpacking the apps I think), saying that /dev/block/mmcblk0p3 cannot be mounted, because it does not exist.
After searching on japanese sites, it seems that there is a 3rd partition in addition to the one for /sdcard and /data that is used (as far as I know, only for that) by an app called DioDict (japanese / english dictionary).
Not that this is a great loss, but I don't know where and why this 3rd partition was deleted. I tried to restore one, but after a while I just gave up, since I don't have any dump of the data that was there anyway...
Could anybody confirm/infirm this ???
3) Recovery 2e
Since I wanted to test to other roms, I needed to get back to the recovery 2e.
I gave a try to CF-root, which included that also.
http://forum.xda-developers.com/showthread.php?t=788108
Once again, Odin was the only one that could do the job, Heimdall still ignores me.
Problem : the update is successfully done, but for a reason I ignore, I lose my SIM card in the process.
Flashing back an official ROM makes it available again, but CF-root won't allow me to phone in Japan.
How did you people handle that ? Unfortunately I couldn't afford staying too long without a working phone, so I didn't investigate much further, but did other people have the same kind of problem ?
Conclusion :
As of now, I have a rooted device, and am pretty happy with it.
However, I wish I could give a try to the nice work I've seen around (CyanogenMod on Galaxy S seemed very yummy), while still being able to use my SIM card here.
Any feedback is welcome !
I haven't played around that much with DioDict to tell you right away how to solve this, but maybe there's some answer getting the first firmware:
SC02BOMJJ1 (10/10/13) :
http://fus.samsungmobile.com/Phone_...2BDCMJJ1_SC02BOMJJ1_SC02BOMJJ1_OM_DCM.zip.enc
BINARY_ENCRYPT_STRING 1662317
thanks a lot for this link ! just a question, where did you guys find them ??? the site itself seems very dummy
but as far as I could read on japanese threads, that seems to be some prefab settings
in my case, that third partition has been deleted, so I think I would have to recreate again beforehand.
as for the "how", I must confess I don't know... I' had somehow succeeded in running parted to create one, but for a reason I ignore couldn't assign it to the block
I could install a Cyanogen Beta3 today, and though everything is alright, still got no 3G.
SIM card is not recognized, and it seems impossible to input the appropriate APN information. Could it be that the modem embedded in the SC-02B is different from the mainstream one ?
EDIT : seems that indeed the SC-02B has a different modem. At least the firmware has a different size, hence the need of a different PIT file when you flash from an "international" ROM.
I'm starting to wonder whether I'll see the end of it someday >_<
things that seem to work
Now that we have the capability to recover after we trash our ROM what can we do.
Super Oneclick root - works
Z4Mod "because we all have the need for speed" -works after you use titanium backup to remove some of the bloat-ware from /system
Z4Control works if you use Z4Mod to patch the kernel and convert /data to ext2 first.
The UOTKitchen will work to change the battery icon and other status bar icons if after you have completed these steps http://forum.xda-developers.com/showpost.php?p=9318973&postcount=1290 you extract the framework-res.apk from the resulting zip file and use adb to push the new framework-res.apk to /system/framework/framework-res.apk followed by an adb reboot recovery command before you do anything with the phone. From the recovery menu wipe cache and then reboot now. If you don't do this last step it could lead to having to reflash the factory firmware happened to me about 6 times this weekend. DO NOT TRY THIS IF YOU HAVEN'T CLEARED ENOUGH SPACE ON /SYSTEM BECAUSE IT WILL KILL YOUR PHONE!!!!!
For all those who want a pit file, here I leave you a custom pit file created for the sc-02b.
I must make this clear, this PIT file was made for those who flashed their devices with a rom for some other galaxy s version and want to reflash their devices back to the original SC02BOMJJ1 rom. I cannot ensure you it will be useful or that it will work for anything else.
Also, when using this PIT file with odin, be sure to check the "Re-partition".
@shikigamild :
is this PIT file the same that came from komugi.net ?
at the same time, could you tell me how you got the stock rom file links please ?
@dejanet :
so you say that with the Z4mod you have a fully working device ?
has anyone tried the CF-root package ? after applying it I lost my SIM card, so I wonder if you experimented the same kind of inconvenient there
Oh yes went through all of the fun of trying the various kernels everyone leaves you with sim not recognized.
Sent from my SC-02B using XDA App
Aaarghh,that sucks donkey balls...
Guess that means we won't get any, custom rom any time soon will we?
I'm new to all this stuff, so apologies for the noob questions.
I rooted my SC-02B using the tool in this thread. I was able to install and use the Barnacle Wi-Fi tethering app from the market, so I know it was a successful root. Now when I go to install and use Titanium Backup from the market, it tells me I don't have root access or don't have BusyBox installed. When I go to install BusyBox from the market it shows my phone as being rooted, but when I tap install it gives me a failed message saying my phone isn't NAND unlocked.
How do I do that? Once I get that problem solved, what are the next steps for installing the Z4Mod?
So far I've never installed BusyBox through the market. Just install it with Titanium and it should work fine (click the "Problem ?" button).
Then, I suggest that before doing ANYTHING involving a custom initramfs (like ClockWorkMod), you dump somewhere your mmcblk0p3 partition, in case you want to restore your phone exactly to the same state you got it.
If your not that paranoi, you can skip this part, but as I wrote myself a dozen times here, I forgot it and would be interested also ^^
Ok, thank you for the info. Does Z4Mod cause any problems with this phone? I read in dejanet's signature that the lagfix seems to cause problems. Z4Mod is the lagfix he's talking about right?
bnr32jason said:
Ok, thank you for the info. Does Z4Mod cause any problems with this phone? I read in dejanet's signature that the lagfix seems to cause problems. Z4Mod is the lagfix he's talking about right?
Click to expand...
Click to collapse
z4mod is just a rooting app. There's no lagfix. He's probably referring to OCLF which is made by the same developer. It's obsolete now, so do not use it.
About the rom problem, can't you just flash the modem from a Docomo rom after installing the custom rom?
No, z4root is only for rooting, but z4mod is a lagfix application. As far as i know, it will convert your phone system to ext2. However, i scare it will affect the DioDict application in SC-02B, so i haven't tried it yet.
Trojan,if you fear losing diodict,you can still dump your mmcblk0p3 partition.
It is the one containing diodict data.
I would actually be very grateful for an upload of that one (^-^)/
Sent from my SC-02B using XDA App
trojan111 said:
No, z4root is only for rooting, but z4mod is a lagfix application. As far as i know, it will convert your phone system to ext2. However, i scare it will affect the DioDict application in SC-02B, so i haven't tried it yet.
Click to expand...
Click to collapse
Opps. Didn't realise there are two apps with similar names.
Still, wouldn't suggest it. EXT2 is unstable.
Hi, bebert218. Actually, i am a noob, i don't know how to do it. Can you tell me how to view the partitions in the internal memory? I suppose DioDict application contains a database file somewhere in the internal memory, but i don't know where and what the file name is. Appreciate if you could give me a hand on it. Thanks.
Custom Kernel and Roms
From reading through the forums it seems custom roms present issues with the either the sim card or modem on the sc-02b. Are custom kernels causing issues as well on this phone?
Yes it is the kernel that causes the problem. I think a couple of us have tried them all.
Sent from my SC-02B using XDA Premium App
disappointing Other than rooting and using Galaxy tuner to do some tweaks there isn't really much else to do. At least the upgrade to omka5 showed much improvement from 2.2
Hi all,
Had my GS a few weeks now but am in a bit of a predicament. When I received this phone I thought that Three had announced the availability of Gingerbread. However, I had not realised that to update the phone with Kies would require that I had a landline broadband connection as I use the phone with usb tethering for my internet use. This being the case I contacted Three who told me I could take the phone into a certain Car Phone Warehouse that has a service center. I had to leave my phone with them the whole day and when I collected it, they had flashed a rom which is not one of Three's and also took me back from 2.2.1 to 2.2. I also no longer have an option in Settings>About phone, for Check for updates.
I have since used super one click and managed to root it (my first time rooting) and done a backup of /efs as I read that is good as it contains IMEI info etc. Also now have Titanium Backup Pro and done a batch backup of all user apps & system data.
Phone has become quite laggy but reading info on using a different kernel it didn't seem to make sense to do that until after updating the rom.
Is there anything here to explain what the rom file name convention means please? I found the following link on here to the stock firmwares but don't know how to differentiate between the rom names? i.e. how do the following two differ?
http://forum.xda-developers.com/showthread.php?t=1102881
XXJVQ/XXJVQ/OXAJVQ/Sbl (MultiCSC)
XXJVP/XXJVP/OXAJVP/Sbl (MultiCSC)
Is it possible to root gingerbread 2.3.4 after flashing to one of the above?
As I rely on the phone as my only way to connect to the internet should I also do a Nandroid backup? I've only heard a little of this, my understand is, this is a way of creating an image of the phone as it is now so that it can be re-imaged from this somehow if something goes wrong? Any guides on creating a Nandroid backup please? This isn't the name of an App is it, rather a term or something to do with using terminal?
Am guessing I need to move my Titanium Backup files from /mnt/sdcard/TitaniumBackup somewhere else before flashing or does that not wipe this area?
I've downloaded odin from the thread above so I have v1.82 along with the 3 .pit file versions.
Is there anything else I should do or need before proceeding?
Thanks in advance for any assistance with my understanding of this.
Currently my phone info reads;
Firmware version: 2.2
Baseband version: I9000NEJP2
Kernel version: 2.6.32.9 [email protected] #1
Build number: FROYO.NEJP5
Lol.amazing i was.in the same predicament like u two days bak hahahaha but instead my fne was brand new lol....
Anyway i got gingerbread astock now runnin on me fne so do this as.i.did.it like this
Download the JVQ file of 2.3.4 and then extract it... Use odin to flash ure fone... Im pretty sure on that thread it shows how.to use.odin and flash but here goes
First open odin and go into download mode with ure fne( by switching ure fne off then wait til it vibrates...then preaa.altogether the volume down key ure home key and power key.... Then plug in usb then flash yhe rom like.how.it is.sed on that thread which u founf the firmware on.... Hope this helpa
..::XDA RocK::..
Sorry for spelling mistakes lol still gettin used to the virtual keyboard lol
..::XDA RocK::..
Nandroid backup is a name of app which you can use for complete ROM backup useful in times of complete crash.
Just be careful when flashing. Normally it shouldn't screw up your phone but you need to be careful and ALWAYS read the Instructions in full. I have seen people ruining their phones just because they never read the what they were supposed to BEFORE starting.
All the best!
Thanks for the info.
I've found this guide now to Nandroid, which says the easiest way to get it onto the phone is to install ClockworkMod Rom Manager from the Android Market. I'd previously been looking for Nandroid in the Market.
http://www.androidpolice.com/2010/0...nandroid-backup-and-clockworkmod-rom-manager/
Trouble is when auto detecting my model it gives a couple that could relate to my model and I don't know what the difference is...
Galaxy S i9000
Galaxy S i9000 (MTD)
Does anyone know what the significance of the MTD is please?
Use the one without mtd as that is the originak international version....
..::XDA RocK::..
Hi
Thanks, I did some googling and came to the same conclusion, I think the MTD has something to with Cyanogen.
Anyways, am stuck at the moment at the next snag now in that I appear to have the more recent version of recovery i.e. the 3e instead of 2e needed.
This guide says I need to flash a custom rooted kernel (a CF-Root one) but my Menu > Settings > About Phone, ‘Build Number’ says ‘FROYO.NEJP5’ and I can't see which is the corresponding CF-Root kernel.
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
http://forum.xda-developers.com/showthread.php?t=788108
Besides I am still on the original file system also and would prefer to be on ext4 to fix lag.
More rethinking required.
You dont nid root to flash a new firmware such as the jvq gingerbread.... If u flashed that u cn hav both ext4 and root support for ure fne so why dnt u flash ure fne to 2.3.4 first then root then ext 4 it.... Step by step i guess
..::XDA RocK::..
Prior to this thread I had read the following advice that before you do anything, you should back up your /efs folder containing not least your IMEI info.
http://androidforums.com/galaxy-s-a...d-19-18-pm-est-apr-08-2011-major-cleanup.html
http://forum.xda-developers.com/showthread.php?t=859914&highlight=restore+imei
To do that requires root as I understand and whilst the above suggests that on 2.2 you should use z4root, I actually used super one click which worked and has an unroot option too.
I also wanted to be rooted because I already lost my user apps and data when it was flashed to 2.2 by the service center and concluded that the only decent back up apps all required root.
I wish I had rooted while I had the carrier version of 2.2.1 on my phone and made a Nandroid backup of that so I could return the phone to that state in case of warranty issues. I never foresaw that the service center would flash a non carrier branded type rom onto it.
Although I'm not overly keen on 2.2 or the lag issue, it works and therefore I think the prudent thing to do is do a Nandroid backup of this so I can at least get back to this if something ever goes wrong. However, I think I have read somewhere that Nandroid requires the ext4 file system too, so I think I need a kernel that does this as well as one that has recovery 2e and all for my existing 2.2 rom.
I don't know how already being rooted or that busybox is already installed (think either super one click did that or titanium backup) affects flashing a new kernel?
Since reading some other threads of people who have flashed up to 2.3.x this was prior to it being officially released in the UK and I see some now wanting to get back to 2.2.x so they can update to the official release.
So it might be better to get things to a state where I can upgrade to that via Kies in an internet cafe or something.
Anyways have a bit of a headache now so not doing any more today.
Completely rom'd, kernel'd and flashed out.
Just a quick update as I had to give up on Kies in the end.
However, I did discover, for others like me without a separate broadband connection, enabling the Mobile AP and connecting the phone in Kies mode was possible, whereas the usb tethering is not. This allowed Kies to recognise that an update was available and also downloaded it. I had to use an app from the Market Place called Spoof FW prior to connecting the phone to the laptop which allowed me to choose my carrier so that Kies offered the correct download.
I then had a problem that the phone wouldn't flip modes from Kies to the download mode but instead would hang in the Kies preparing firmware process. I deleted a couple of thumbnail picture files that had long file name extensions and did a factory reset and then kies was able to change the phone into download mode. However, at this point, perhaps because the laptop I was using is old and only has the old usb ports it would then report that it didn't recognise the usb device or crash device manager.
Anyway for now I have given up on the carrier rom option and opted for an Odin flash of JVQ and CF-Root 3.7.
Phone is now a lot faster than Froyo 2.2 and next on the agenda is to use the CF-Root addon for converting to ext4. The only downside I've found so far with JVQ is the usb tethering is flawed, either doesn't recognise that the usb is connected or seems to freeze net comms over the usb service after only a short time. Mobile AP seems to work so I have a pci wireless card coming to upgrade the desktop PC.
Hope the usb tethering gets fixed in the next Android release but hopefully for now I can manage.
Hi Guys! I have a Galaxy S1 (I-9000). I've used a custom ICS rom until yesterday, but it was slow, and drained my battery very quick. So I XXJW4 (as far as I know this is the latest official release with value pack), but there are wierd issues (very quick battery draining, wifi disconnecting, doesn't remember my mobile network settings, sluggish browser, etc).
I did the usual stuff like cleaning cache/dalvik/factory reset. Usually I like hacking around with theese things, but now I just want to use my phone, so I would like to restore it to a "very" official state. I'm not sure about the technical details, but afaik some of the update packages are not completely reinstall everything. So what is the correct way to clean my phone so it would look like a brand new one like it has never been modded?
I think I need to repartition. Even if I don't want to change the file systems I would prefer to have a fresh start so no previous data could remain. After that I would need a firmware that contains everything (kernel, bootloader (?), modem, dbdata, factory file system, etc etc) I've already found a lot of roms out there, but I'm not certain witch one will do the job. After I installed the value pack update I realized that dbdata was not part of that package, and I had to find one after googling for a while. So I'd really appreciate some pointers
So that's my story, to sum up the question is how to restore a galaxy s to an older version my making sure everything is completely wiped, overwriten, reinstalled, etc.
Thanks in advance.
go to sammobile dot com webpage and search what firmware you need and download. Flash this rom with odin.
Use Odin to flash the.rom that you like
why dun try ICS infinitum by bhu1...amazing,,...
It is not true. In the past i flashed with odin and it did not even remove all of the apps i had installed with 2.2 ...
DaveBG said:
It is not true. In the past i flashed with odin and it did not even remove all of the apps i had installed with 2.2 ...
Click to expand...
Click to collapse
Okay, let us be more specific:
- format /sdcard
- format /system
- wide data/factory reset
- flash with odin
Nothing and I mean nothing will be left on your phone. That process formats everything you need to in order to wipe your phone.
Good luck!
Read this https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
Value pack made my phone weird to.
just download some original Rom and flash via odin that will work