Hi
I am wondering if it is possible to get 2e recovery without using Odin or Heimdall. I know a similar question was asked here http://forum.xda-developers.com/showthread.php?t=880093.
But I have i9000M which has a high correlation with Odin/Heimdall and internal sd failure (not saying Odin is causing it). In any case, I would like to avoid using Odin and Heimdall.
Thank you.
Why do you need 2e ?
btw, do you play DOD:S ?
xxgg said:
Why do you need 2e ?
btw, do you play DOD:S ?
Click to expand...
Click to collapse
I need to 2e to install CWM (?). And then i can use CWM to install Darky's rom.
DOD:S as in Day of Defeat:Source? If yes, then nope.
MaelstromXC said:
I need to 2e to install CWM (?). And then i can use CWM to install Darky's rom.
DOD:S as in Day of Defeat:Source? If yes, then nope.
Click to expand...
Click to collapse
Well best bet is to flash i know you dont want to but once you flash kernel such as cf root you have 2e recovery then you can install cwm... just one more flash ..or there is an app in these threads to flash kernel from within operating system http://forum.xda-developers.com/showthread.php?t=877444
tragusman said:
Well best bet is to flash i know you dont want to but once you flash kernel such as cf root you have 2e recovery then you can install cwm... just one more flash ..or there is an app in these threads to flash kernel from within operating system http://forum.xda-developers.com/showthread.php?t=877444
Click to expand...
Click to collapse
What about using this program to directly flash Darky's rom?
Related
Hi guys i've used CF-Root for install darky's rom with voodoo kernel.
Now i've installed speedmod kernel and when i try to swith to recovery 3e i get 2 errors for missing files, and i have to reboot for return in clockwork recovery.
Is there a method to restore Recovery 3e in JPY?
Someone can make a flashable cwm zip for restore recovery 3e?
Help me pls.
If i flash back to stock JPY and after i flash darky's rom with speedmod's kernel and then restore with nandroid backup, it will replace anyway the recovery 3e with 2e?
Emm, why would you need 3e? Its as rubbish as the come.
And just flash cf again.
dupel said:
Emm, why would you need 3e? Its as rubbish as the come.
And just flash cf again.
Click to expand...
Click to collapse
I don't need recovery 2e. I've speedmod's kernel and lagfix enabled.
I wan't back it becouse it goes in conflitc with speedmod's kernel.
lelf said:
I don't need recovery 2e. I've speedmod's kernel and lagfix enabled.
I wan't back it becouse it goes in conflitc with speedmod's kernel.
Click to expand...
Click to collapse
It doesnt conflict with anything because there is about 0 people who use 3e (or 2e for that matter) on speedmod kernel. Its just stupid, when you have cwm.
dupel said:
It doesnt conflict with anything because there is about 0 people who use 3e (or 2e for that matter) on speedmod kernel. Its just stupid, when you have cwm.
Click to expand...
Click to collapse
Can be stupid....but you aren't answer to my question.
I need help for this not some opinion.
Wait, Why is this in the dev forum?
Rawat said:
Wait, Why is this in the dev forum?
Click to expand...
Click to collapse
Sry, my fault. How i can swith or delete this thread?
Hi everyone.
I installed ROM Manager and flashed ClockworkMod Recovery, but even though the phone said it successfully flashed it, when I enter recovery mode I get the stock recovery. I even tried using the apply sdcard:update.zip option, but it gives me an error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I even considered installing Amon RA's recovery, but there doesn't seem to be a version compatible with this phone. What should I do? Is there another recovery you'd suggest me to install? If not, what can I do to get the ClockworkMod Recovery to work? Any help would be much appreciated
You must have recovery 3e. Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Sent from my GT-I9000 using XDA App
Sorry if my questions are too basic, but I'm a new Android user.
android.francis said:
You must have recovery 3e.
Click to expand...
Click to collapse
When I enter the stock recovery mode, it says Android system recovery <3e>. Does that mean anything?
android.francis said:
Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Click to expand...
Click to collapse
On the creator's blog it says that SpeedMod "works on all stock Froyo ROMs XXJPO/DXJPA/XWJPA and popular custom ROMs", although his thread doesn't state so. My ROM is Froyo I9000BUJP7; am I safe installing this kernel? Also, I don't know if it matters, but my phone is network locked.
Thanks for your help.
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
android.francis said:
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
As android.francis said your best bet is to flash a kernel with 2e. I use cf root it always does the job for me.. http://forum.xda-developers.com/showthread.php?t=788108
I am having the same issue, now installed the Speedmod kernel, how can I enter the CWR now?!
My stock recovery still says 3e
Hello,
I had the same problem and I used cf root too. It works very well and if you use a stock rom you will find the rigth kernel there. I only had some problems to find the rigth kernel for my branding firmeware, because this I flashed a stock rom before and after cf root.
Clockwordmod Rom Mgr boots into 3e but up button/power/menu button boots speedmod 2e.
Here is a weird one I think. I installed stock JVH 2.3.3 (from wuala site I9000XWJVH.7z) which I rooted with CF-Root (CF-Root-WX_NEE_JVH-v3.2-CWM3RFS.tar) and then applied Speed mod (speedmod-kernel-k15h-t24-300hz.tar). If I press the 3 button combination I get the speedmod 2e recovery and can backup and restore, install update.zips and reformat partitions to ext4 just fine. So far so good. All updates performed using ODIN.
Here is the problem. I installed a 'paid for' version of ClockworkMod Rom manager (from the market) but when I select backup or 'reboot into recovery' I get the stock 3e kernel and it fails.
Any ideas?
Thanks
I have got galaxy s with build FROYO.BOJP7, which file should i download in the CF-Root thread to root my phone?
Thanks
u can use that or u can use superoneclick
astralmaze05 said:
u can use that or u can use superoneclick
Click to expand...
Click to collapse
i wont be able to use clockworkmod recovery with 3e recovery..i need to be in 2e recovery to flash updates or other ROM's
Hi i have a sgs 2.2 JPJPG and rooted but forgotten the method I used for rooting. Now wanna install clockwork & voodoo but can't using update.zip apparently my recovery is 3e which accepts only signed update.zip. Anyone can help me to install clockwork recovery image?
Sent from my GT-I9000 using XDA App
Flash file with Odin for 2e .
http://www.multiupload.com/DJN4GM7KQ3
jje
JJEgan said:
Flash file with Odin for 2e .
http://www.multiupload.com/DJN4GM7KQ3
jje
Click to expand...
Click to collapse
will this work for build froyo.(bojpb) Thanks mark204
I have tried to flash speedmod kernel and use CWM from there but when i try to flash a rom it doesnt work and when i try to reboot it gets stuck at the boot animation. is there a way you can install CWM recovery that actually works? also if you can find an app like SGS kernel flasher except that flashes roms instead? i have tried using ROM Manager to flash CWM but all that happens is it says successfully flashed CWM recovery then when i boot into recovery it goes into android recovery 3e.
Rooted Samsung Captivate i897
use one click back to stock
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Zestar said:
Hello, what I do every time im stuck is go back to stock KK4 using one click odin.
from there then I use Odin 1.85 to flash Korn kernel.
Korn kernel include cwm, from there you can install other Roms or kernels, or just root.
regards.
Click to expand...
Click to collapse
In addition to what Zestar suggested I would recommend the KK4 with boot loaders.
Sent from my SGH-I897 using xda app-developers app
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
vergtot said:
Same thing with mine.
I want to have a cwm recovery, but i'm afraid to bricked again my captivate. Can someone make a step-by-step on how to get a cwm recovery?
thanks.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Would help to know what is your goal (flash rom, kernel, modem or simply having cwm recovery). There is a well written guide in the Q&A: http://forum.xda-developers.com/showthread.php?t=1350266
But Zestar pretty much explained it. You'll need Odin 1.85 (which you will find in the guide) and a custom kernel (doesn't matter much which one as long as it supports cwm recovery). You have a lot of reading to do before jumping into this and I highly suggest it! I also bricked once outta being hasty, won't happen again