I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
no one cant help, I really freak out to solve this issue
Hi matanamos,
have you wiped data/cache before flashing?
For 2.2 ROM's it might be recommended, to install one of the full G.O.T. 2.2.1 SBF images with RSDlite first.
Hope this helps!
Cheers,
scholbert
I tried everything you said and nothing work.
I really want to move from 2.1
BTW THX
nobody cant help me??
matanamos said:
nobody cant help me??
Click to expand...
Click to collapse
Did you really try to flash the G.O.T. 2.2.1 SBF image with RSDlite?
What happened afterwards?
We should try to break the problem down to pieces, so anyone could follow
Regards,
scholbrt
matanamos said:
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
Click to expand...
Click to collapse
Did you install the correct baseband files?
For example, the ROM you installed could be using Europe 3G and your operator could be running North American 3G (no idea what your provider uses, but you should look it up).
Once you know, you could choose the appropriate baseband in either GOT Open Recobery or Androidiani OR.
There are some manual ways (file copying) to do this, but it is more complicated to do then through OR (especially if you already flashed).
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
matanamos said:
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
Click to expand...
Click to collapse
try this
go to the open recovery menu wipe the cache and dalvik cache and then change the baseband and wipe the dalvik cache and cache again
if still can't then try using RSD lite to flash the GOT 2.2.1 SBF then wipe the cache and dalvik cache
let us know what happens next
First of all thx for your comment,
When I burn firstly the G.O.T 2.2.1 the Rom works(he recognize my opreator(cellcom)) great and after I burn the ROM I want like Froyomod or MIUI I still get the Erorr!
please andybody?!?!?
I had the same issue. This is what I did.
Flash the original sbf using rsd lite. Flash vulnerable recovery using rsd lite. Flash CM using OR. Then do a dalvik, cache and full system wipe. Reboot.
This solved my issue. But remember, whenever ur flashing the original sbf and the bootloader, do not boot into android. Keep the Direction Pad up key pressed so you always boot into the bootloader when Rsd lite reboots ur phone.
Try that and pm me if you still have issues.
I must use the CM ROM or I can use the FROYOMOD instead!?
and I dont understand what I have to do after I Flshe the Rom By the RSD LITE , you mean after the RSD LITE flash my SBF and restart my phone I need AUTO get into bootloader agian1?
and what you mean by the "Original Sbf"?
The yellow sim is cause to the Force Close problam.
hhhh LOLLL matan?!?! XD i recogenize you XD
Some ROMs overclock by default ( i believe most do by now).
This makes you phone faster, but potentially less stable with some (rare) milestones. You be may unlucky with you phone.
You should check to see if this is the case.
Either edit the 10overclock file manually from a shell in your recovery if use a recovery that supports overclock and disable it (set it back to stock 550).
Another option, if you really want to overclock, is to up the max vsel to gain stability. But as this requires trial and error, i would test the stock speeds first to confirm that this is indeed the problem.
It may not be overclocking, but it sure sounds like what happens when you have just enough vsel to boot but not enough to be stable.
Sent from my Milestone using XDA App
Im cant belive that the oc cause the fc.
The new yellow usim in cellcom--israel.
The kernal of 2.2 are not giving fc error. After rom installing the the fc popping up.
When i inserted the old sim (the purple one) the FC stopped to poping up.
I will try it. Update in a few hours!
TNX all!!!
Sent from my Milestone using XDA App
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
matanamos said:
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
Click to expand...
Click to collapse
I would try to do all three wipes from open recovery (cache partition, dalvik and full wipe) than apply update with the custom rom .zip and (very important!) set baseband frequencies for you country in open recovery.
First of all TNX alot!
I tried to do that (wipes, than install rom and baseband, RR than reboot.)
But it didnt work =/
Maby the KERNAL (got release) cause to the FC??
Sent from my Milestone using XDA App
plzz I tried everything and nothing help ,like Burn without sim ect
pllz anyone!
Related
ever since updating to the cyanogen 4 series of roms i have been getting 3g issues. by this i mean that sometimes it doesnt want to connect to the internet from any program, like the market, google voice, or the browser. sometimes it does work, but sometimes i have to reboot the phone or just turn off 3G in order to browse the web. i am running haykuros spl with apps2sd with a 800mb ext4 partition. and im running the latest cyan mod.
can any one assist me in this?
what can i do to fix this?
do i need a new g1?
I dunno if wipe helps have you tried that? boot into recovery, wipe (alt+w)
if not, jacxrom is a good alternative to cyan, i guess...
but chances are your phone's hardware itself is fine, and you won't need a new one.
jcarrz1 said:
I dunno if wipe helps have you tried that? boot into recovery, wipe (alt+w)
if not, jacxrom is a good alternative to cyan, i guess...
but chances are your phone's hardware itself is fine, and you won't need a new one.
Click to expand...
Click to collapse
i just wiped coming from his previous rom. 4.04
ive never had this problem and i dont want to switch rom series
can any one help me?
this is really weird.
I had same problem.. so instead of doing an upgrade.. I did a complete wipe and installed the new stable CM fresh... since then I feel that I don't have this issue..
dilfatx said:
I had same problem.. so instead of doing an upgrade.. I did a complete wipe and installed the new stable CM fresh... since then I feel that I don't have this issue..
Click to expand...
Click to collapse
forreals?
because i had just wiped and i havent updated to anything since then..
has anyone else experienced this and how did u fix it?
ive had the same thing happening lately. i had it happen tonight with just my edge connection i had to reset the phone. I also just wiped and reformatted my sd card for a linux-swap partition before flashing this rom so i know that isnt the problem.
2.0t03speed said:
ive had the same thing happening lately. i had it happen tonight with just my edge connection i had to reset the phone. I also just wiped and reformatted my sd card for a linux-swap partition before flashing this rom so i know that isnt the problem.
Click to expand...
Click to collapse
so how did u fix it?
Try re-installing the radio.
I had to do a second wipe after installed to fix the 3g problem. Since then I haven't noticed any problems
bootleg16 said:
so how did u fix it?
Click to expand...
Click to collapse
just rebooted the phone and all was well.
I dunno if this is related, but Ive been having bluetooth issues since the latest few updates, bluetooth has never been perfect for me, but when I listen to mp3s over bluetooth it almost constantly stutters, like its dropping the BT connection, because the music seems to have been going on playing while I don't hear anything.
what is with all these questions in the wrong forum? where is Mikey when you need him?
READ THE STICKIES. POST IN THE Q&A FORUM.
Mod request to delete thread: fix for BT and 3G issues
1. power down the unit with the red key. Wait a minute. Power back up.
2. Try reinstalling the radio
3. Try reinstalling the ROM, and then reinstall the radio again
5. You shouldn't have to, but wipe, re-create (not just reformat) your ext# partition (you can back it up and refill it, but occaisionally stuff gets left behind) reinstall the ROM, wipe, install again, install the radio, full power cycle.
5. (Last) post your issue
This actually belongs in the ROM forum, but not until these basics have been tried.
Janis said:
1. power down the unit with the red key. Wait a minute. Power back up.
2. Try reinstalling the radio
3. Try reinstalling the ROM, and then reinstall the radio again
5. You shouldn't have to, but wipe, re-create (not just reformat) your ext# partition (you can back it up and refill it, but occaisionally stuff gets left behind) reinstall the ROM, wipe, install again, install the radio, full power cycle.
5. (Last) post your issue
This actually belongs in the ROM forum, but not until these basics have been tried.
Click to expand...
Click to collapse
i tried this but still no cigar,
=[
I don't believe this to be a problem with a ROM or radio. I've had similar connection issues recently. i noticed it after flashing a Hero Theme to Cyan 3.9somethin. I thought the rom might have been the cause of the issue but a buddy of mine that i work with has a stock G1 and has similar connection issues. Also a customer came into the store who had a Samsung Highlight with similar problems, i figured it was a problem on Tmobile's End. It still hasn't fixed itself so i plan to give customer service a call in the morning and see if they have any resolutions or if its a recognized issue. I'll post back with what i get tomorrow.
MOD EDIT
Moved to Q&A forum
no signal..
As of late my phone was good... but now it says no service all day why.. an what can i do to fix... i was running cyanogen 4.0.4... i beive i hav the latest raido.. spl dont know... the wifi still works thou.. help please..
Please help a desperate x8 fellow!!!
The thing is like this:
My black X8 has been working great so far, I've realy abused it, installed 2.2 then 2.3 roms then factory reset it and then modified the stock rom till it was custom... but one day I "accidentally" onporpouse... (long story) FORMATED SYSTEM...
I know thats very stupidumb but well... so it won't allow me to install anything but 1.6, did this from flashtool pccompanion wont repair it: "there is no update for your phone yet, check later" or something, same with SEUS, rooted 1.6, installed Xrecovery, tried 2.1 stock roms and nothing it just enters loop restarts.
Im beggining to grow some love for 1.6 and that is just wrong... can somebody help me? PLEASE.
More info: the screen in "sony-ericcson" logo not the animated one and brightnes is very dimmed like 10% or so.
THANKS IN ADVANCE.
You can use pccompanion to repair your x8
Sent from my X8 using XDA App
ThankU
Thanks for the quick answer,
Already try that via update and repair phone (phone in flash mode), also with SEUS none of those worked for my, I'm guessing I messed with something that cannot be detected by pccompanion since it tells me "there is no update for your phone yet keep trying" or some thing like that.
But my real worries began when even xrecovery could give me back my precious 2.1 backup, I have a backup for the stock rom and one from a moment i consider the phone was running smootly, but none boots just loop-restarts.
Maybe there is something Im Missing, Would win xp make a diference in the repairing process? since my main pc is on win7.
Sorry for the messy english.
Thanks in advance.
http://forum.xda-developers.com/forumdisplay.php?f=849
Download the baseband 015 for your device,
Flash it via flashtool.
Be careful,if your device is x8i,dont flash x8a's baseband.
Thanks a lot¡¡¡
THAT WORKED¡¡¡ IT WAS THE BASEBAND AFTER ALL.
Man thank u very much¡¡¡ RELLY where is the thanks buton I press that will give u a brand new ferrari?
Just Flashed the baseband ftf file with flastool and installed 2.1(W8 rom actualy... It works great again.
I hope this tread will help those in need.
LESSON LEARNED:
DO NOT FORMAT SYSTEM
ALWAYS MAKE BACKUPS OF EVERYTHING YOU PLAY WITH
READ ABOUT BASEBAND BEFORE FREAKING OUT
ALWAYS WITH A CONDOM...
REALLY THANKS A LOOOOOTTTTTT.
IN XDA WE TRUST.
That's good
http://www.youtube.com/watch?v=JmvCpR45LKA
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
TheMadxtremist said:
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
Click to expand...
Click to collapse
Which kernel did you use? To be honest, go back to Windows if following simple guide is too difficult. And camera quality won't be any better in Android.
The only reasonable kernel for NAND is the kernel with separate cache partition. On each other appear errors sooner or later. Install this kernel, reinstall the system and apply the update.
And do not start constantly new threads to the questions on which someone already replied before. Read and search forum!!
You people dont get it .
My kaiser is and android F-O-R-E-V-E-R.
Because i flashed it using kaisercustomruu.
and the power button+camera+reset button dont work for me.
i think there's a prob with camera button that's why.
so , now , how do i flash the kernel ?
Please help !!
i cant get into bootloader .
is it the camera button then ?
tell me ?
No, you don't get it man! Stop beeing a noob and learn to follow simple guides! You need to copy KAISIMG and KAIDSIAG (make sure to unpack ) to your memory card. After that you can flash with "Power + Camera + Reset". Is this so hard to Google and find what you need? Also, to make sure you won't make any more mistakes, check if you have HardSPL installed and apply all updates from kernel you used. I recommend you this kernel.
http://forum.xda-developers.com/showthread.php?t=1152219
Man, I just hate those guys who are noobs and consider themselves to be experienced users .
Mr. Noob Hater , were'nt u a noob ?
and i told u i have tried that and it doesnt work................
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
TheMadxtremist said:
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
Click to expand...
Click to collapse
Do you have HardSPL? And remember to keep Camera button fully pressed, not just in half.
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
TheMadxtremist said:
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
Click to expand...
Click to collapse
What do you mean it doesn't accept your SIM card? Some screenshots? Anyway, if Camera button doesn't work for you, then you're stuck with this kernel forever . Which one did you flash? I'll give you proper update for it.
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
TheMadxtremist said:
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
Click to expand...
Click to collapse
I asked you about kernel! Whcich KERNEL did you flash?
I dont remember correctly , but i think i flashed kernel with separate cache partition and modified cpu and gpu with atools.....
Now , i only need an update .............
i figured out and rectified the problem as well......
Was pretty hard......
AND THANK YOU MR> NOOB HATER
waiting for wifi update.....
go to settings/about phone and check kernel version. If show something like 2.6.32.9 N50Vc #39 Kernel you can find androidupdate.tar packed with kernel in Cache Kernel & ATools.zip. http://forum.xda-developers.com/showthread.php?t=1152219.
Can you share what was wrong with the sim? (for future"generations" with the same problem)
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
No. Rather, it will not work. You do not have a scoot's kernel... Maybe someone else remember your kernel signature and give you update.
TheMadxtremist said:
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
Click to expand...
Click to collapse
Man, you just proved that you're a huge noob. You flashed a kernel with RUU and you don't even remember which one was that. LOL . Looks like you're out of WiFi forever now . I've never seen such kernel anywhere...
TheMadxtremist, If I were you I'd tried to find the reason why camera button not working. You wrote that you dropped phone, so probably this is some hardware failure(flex tape, switch, something else). If you have any experience try to disassemble phone and fix this or find someone who can do it for you. Because even if someone will give you update your phone will be unstable with this kernel.
So I got myself into really funny situation I'm stuck.
I worked with xperia mini pro everything was fine.
Now I got x8 well older one... And all i did was rooted it with flashtool.
Everything was working fine from that point with root rights like root uninstaller (I just tested didn't deleted anything).
And then I made "factory reset" Deletes everything from sd card and bla bla bla well you guys know what i mean.
After that I wanted to install kernel but it's not that easy. So I first read alot and did not do that. Since it would require bootloader unlock and thats pain with 11W29.
So just after factory rest somehow I bricked my phone...
But it's interesting brick... VERY INTERESTING.
It turns on, it has flash mode. I can update it via update setup and tried to do that.
Nothing helps all I get is :
phone loading normally, then there is no menu, not sony ericsson home, not go launcher, no settings available no nothing...
To explain my problem i will upload screenshot.
And I can't flash it now since it's not bootloader unlocked.
And I can't access anything from phone.
This is what you call hard brick?
Hard brick is when You can't turn on phone, so there isn't any way to install ROM again. In Your case it's strange soft brick, cause it looks like ther isn't any launcher If You can enter into flash mode than You should reinstall stock ROM and kernel using flashtool (with version 0.2.9.1 cause it's more stable with older devices, such as x8).
Its not bricked. / You can use android commander to push recovery.
It's stock already and I tried stock launcher via updatesetup of SE,
And I think i need bootloader unlock to flash it ? or I'm wrong.
And Later on i will try with older version of flashtools
thx for answers guys.
No, unlocked bootloader allows You to install custom kernels, but some ROMs works also with stock SE kernel, so You don't have to unlock bootloader to install custom ROM or back to stock ROM
So i'm back again on same problem....
I have a Question if you wanna flash phone from flashmode u don't have to have unknown sources and debugging turned on.
Since i can't do that...
My following actions :
I will try to install fresh win7 32bit, since now i'm on 64 and on this system i was working with mini pro xperia, so maybe that may be the case...
I'll try to flash it with older version of flashtools 0.2.9.1 I guess if i remember it right (but on this windows OS It gives me : Error Flashing. aborted)
And I installed flashtools drivers and everything i'm 100% sure of that.
What I tried :
I also tried flashing it from Linux / ubuntu . same as with windows i get :
Error flashing. Aborted.
PCC gives me error when i try to repair it.
Update Service Dose everything as normal but same problem remains I don't get launcher or something just that empty desktop
And I would love you guys if you would give me few links to stock firmware of
x8 11W29 / E15i
And if you have something else to suggest please help me ;D
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
X8 OFW
deamerz said:
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
Click to expand...
Click to collapse
Try Flashing This via FlashTool.
TheScriptKitty said:
Try Flashing
Click to expand...
Click to collapse
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
deamerz said:
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
Click to expand...
Click to collapse
Try Flashing a Costume ROM for stock kernel via Recovery.
Here is a list of ROMs. Just make sure you download one that says (Stock).
After installing JellyPlus and Cor Plenus kernel on my Galaxy Mini for program compatibility, I find the rom a little unstable, and wish to retun the phone to its origional status
Using CWM to load new rom gives error of there not being enough room on the device
Using Odin downloader, either the phone is not recognised, or the operation works, but sends the phone into boot loop, depending on the version of Odin I use
Using Kies, well, my phone is not 5570 any more, but a 5360 which is not supported for firmware upgrade
I am computer literate, Pc, Tablets, Windows, Android etc - No, I only thought I was
I have tried many things, and do not see how to revert the phone to factory (ie GT-S5570I STOCK ROM from its current status of GT-S5360)
Please, please help. I am happy to take a big kicking if this is easy, obvious, or many times previously covered - a push in the right direction would be greatly appreciated
Thank you, Paul
If you have bootloop, wipe data from stock recovery. And as I read read your post, you flashed Mini Plus ROM and kernel! So be happy, that your phone works!
Sent from my GT-S5570 using xda premium
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
dheeraj (dhlalit11) said:
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
Click to expand...
Click to collapse
Same thing lol
Be happy, it still works!
Sent from my GT-S5570 using xda premium
What I did.!
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
hmm try to flash a kernel made for ur device , coz the kernel has the main properties of ur device for kies to detect, tat shud be ok,wont be requiring much space for kernel flashing i suppose :good:
btw there shudnt besuch errors, the updater script is acually set to swipe everything out b4 cpying the new files into ur rom
or else flash a custom rom, its easy tat way
just flash a firnware through odin
dheeraj (dhlalit11) said:
just flash a firmware through Odin
Click to expand...
Click to collapse
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Fix for bootloop: wipe data from stock recovery. Is it hard to read/search?
Tapatalk 2-vel küldve az én GT-S5570-ről
rpaurey said:
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
Click to expand...
Click to collapse
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
shwe said:
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
Click to expand...
Click to collapse
Thank you, and .......... thank you!! I may be being hysterical, but main reason for wanting to go back to original is because the phone now often is stuck with emergency calls only. On rebooting I also sometimes get an Unlock Network screen (should I have unlocked the phone first? Hmm - I have read so much over the last few days that I am not too sure any more. Shall try flashing the original firmware cwm or odin, or both??!! Have you any views on the problems that >I have re the above posts? Kind regards, Paul PS sim works as normal in nokia phone
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
all done and dusted
shwe said:
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
Click to expand...
Click to collapse
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Same problem
rpaurey said:
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Click to expand...
Click to collapse
Hi, I have the same problem. Can you please send yours zip and instructions? For 5570 Odin not sees my phone and for 5360 See, but I do not know how to enter the pit. With it a little scared. I tried. Zip update, but everything just mods for 5570, which is now reports differently and therefore probably do not install via clockwork.
I play with it all day and google it to me a little laugh .. omg (when you have 20 tabs open and there is a mess).
Problem solved
So we solved the problem with rpaurey successfully. Odin really need to be right on the GT-S5570I and I think "I" even at the end.
Stock rom I had only a little English and other languages, but downloading Czech now. Thanks.