Database Develop

[Milestone] Big problem about burn 2.2 roms

I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx

no one cant help, I really freak out to solve this issue

Hi matanamos,
have you wiped data/cache before flashing?
For 2.2 ROM's it might be recommended, to install one of the full G.O.T. 2.2.1 SBF images with RSDlite first.
Hope this helps!
Cheers,
scholbert

I tried everything you said and nothing work.
I really want to move from 2.1
BTW THX

nobody cant help me??

matanamos said:
nobody cant help me??
Click to expand...
Click to collapse
Did you really try to flash the G.O.T. 2.2.1 SBF image with RSDlite?
What happened afterwards?
We should try to break the problem down to pieces, so anyone could follow
Regards,
scholbrt

matanamos said:
I tried servel time to burn the froyomod 2.2.0 or the cm 6.1 rom and everything go o.k until the first boot up I get a message that com.android.process has stopped and this repat every 5 sec and I have no signal ,I tried like burn over ,wipes ,try diffrent rom's nothing work and something interest is that when I set filght mod everything work's great , I think the phone cannot connet to my opreator(cellcom, isreal) and that's why this happning ,please help me solve this issue.
happy new year everybody and thx
Click to expand...
Click to collapse
Did you install the correct baseband files?
For example, the ROM you installed could be using Europe 3G and your operator could be running North American 3G (no idea what your provider uses, but you should look it up).
Once you know, you could choose the appropriate baseband in either GOT Open Recobery or Androidiani OR.
There are some manual ways (file copying) to do this, but it is more complicated to do then through OR (especially if you already flashed).

I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!

matanamos said:
I do what you say with the OR Androidiani and I set Basehane Israel-Cellcome (the one I use) and nothing help the phone keep send me the erorr ,
I dont know what to do anymore!
Click to expand...
Click to collapse
try this
go to the open recovery menu wipe the cache and dalvik cache and then change the baseband and wipe the dalvik cache and cache again
if still can't then try using RSD lite to flash the GOT 2.2.1 SBF then wipe the cache and dalvik cache
let us know what happens next

First of all thx for your comment,
When I burn firstly the G.O.T 2.2.1 the Rom works(he recognize my opreator(cellcom)) great and after I burn the ROM I want like Froyomod or MIUI I still get the Erorr!

please andybody?!?!?

I had the same issue. This is what I did.
Flash the original sbf using rsd lite. Flash vulnerable recovery using rsd lite. Flash CM using OR. Then do a dalvik, cache and full system wipe. Reboot.
This solved my issue. But remember, whenever ur flashing the original sbf and the bootloader, do not boot into android. Keep the Direction Pad up key pressed so you always boot into the bootloader when Rsd lite reboots ur phone.
Try that and pm me if you still have issues.

I must use the CM ROM or I can use the FROYOMOD instead!?
and I dont understand what I have to do after I Flshe the Rom By the RSD LITE , you mean after the RSD LITE flash my SBF and restart my phone I need AUTO get into bootloader agian1?
and what you mean by the "Original Sbf"?

The yellow sim is cause to the Force Close problam.
hhhh LOLLL matan?!?! XD i recogenize you XD

Some ROMs overclock by default ( i believe most do by now).
This makes you phone faster, but potentially less stable with some (rare) milestones. You be may unlucky with you phone.
You should check to see if this is the case.
Either edit the 10overclock file manually from a shell in your recovery if use a recovery that supports overclock and disable it (set it back to stock 550).
Another option, if you really want to overclock, is to up the max vsel to gain stability. But as this requires trial and error, i would test the stock speeds first to confirm that this is indeed the problem.
It may not be overclocking, but it sure sounds like what happens when you have just enough vsel to boot but not enough to be stable.
Sent from my Milestone using XDA App

Im cant belive that the oc cause the fc.
The new yellow usim in cellcom--israel.
The kernal of 2.2 are not giving fc error. After rom installing the the fc popping up.
When i inserted the old sim (the purple one) the FC stopped to poping up.
I will try it. Update in a few hours!
TNX all!!!
Sent from my Milestone using XDA App

Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!

matanamos said:
Pls anybody can try to help us out of this big issue
I dont know that to do anymore!
Thx to everybody that try to help us !!!!!!
Click to expand...
Click to collapse
I would try to do all three wipes from open recovery (cache partition, dalvik and full wipe) than apply update with the custom rom .zip and (very important!) set baseband frequencies for you country in open recovery.

First of all TNX alot!
I tried to do that (wipes, than install rom and baseband, RR than reboot.)
But it didnt work =/
Maby the KERNAL (got release) cause to the FC??
Sent from my Milestone using XDA App

plzz I tried everything and nothing help ,like Burn without sim ect
pllz anyone!

[Q] Help!

Hy guys , sorry if there was another post like this , but i did not have the time to read all the posts . Until a few month ago , i had a friend that helped me to upgrade my firmware and now i can't ask him no more to help me out .
I have a 2.2 fw version , but i don't know exact what version it is , it is with froyo_doc_v7.6.2_jpa.xwjpa . That what it says in "about phone" . I would really like to upgrade my firmware because i am sure that a new one is up , and i can't do that in Samsung Keys because the present one is a custom one .
So , from the bottom of my heart i ask : Can you help me by explaining step by step what to do to upgrade to a new firmware that could be much better ?like ... stability and performance ? And not mess up my phone?
Thank you very much .
P.S. : Sorry for my bad english

doc's roms are very good and stable,
head over to www.romkitchen.org and make one there yourself (easy peasy)
considering you are on custom ROM i assume you will have 2e / CWM recovery, to boot into this you need to power off the phone, Hold volume up + Home button + power button all at the same time.
anyway download your ROM from the above link, place in on the root of your sd card, and boot into recovery, go to apply update from sd card > choose update from sd card > 'Your ROM name here' then select that and select YES,
your phone will do the rest

Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?

DjLittle said:
Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?
Click to expand...
Click to collapse
I really think you need to read at least the stickies and the FAQs before you go much further...if you can't work out that v11 is probably newer than v9, and are looking around for android 2.4, please educate yourself before you ask someone to hold your hand and walk you step by step through bricking your phone.
The order is supposed to be search, then read, then ask...not just ask because you can't be bothered to read anything.
Sent from my GT-I9000 using XDA Premium App

DjLittle said:
Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?
Click to expand...
Click to collapse
ok there are standard released firmwares available from samfirmware.com
as long as you can put your phone in download mode (Reboot holding the power, down volume and middle buttons at the same time) you should be able to use these with a program called odin3 (you want version 1.7).
These are all official stock firmware releases or early leaks of of new samsung firmware.
I do not believe there is an official release of a 2.3 firmware yet but there are some leaks and the SGS II is being released this coming week so I would guess official firmwares are either imminent or might even be available (they were then they werent again so I dont know for sure)
Stock firmwares are simple to install with odin as long as the custom rom you are does no have features like lag fixing enabled.
all you do is connect up your phone in the download mode mentioned above select the full firmware file by pressing the pda button and nabvigating to the file you got from samfirmware.com. make sure this is the only file checked. (no pit, no modem, no csc etc) make sure the only boxes checked are auto reboot and f:reset time
push start and wait about 5 minutes later you'll have a stock device.
if this goes wrong in anyway or you have lag fix or other stuff and you want to reset this first, download darkyy's ressurection rom do everything exactly the same as above only also select the pit file that comes with darkyys and also select repartition. get that working and then flash the stock rom as desicribed above.
I have had no issues when I have followed this procedure all my issues start when I deviate from this.

@ rschenck thank's but you have to understand that some of us work from early in the morning to the night , and i don't have the time to stay and read all the sticky posts and all the posts.
@ curioct : Thank you very much for the info . I will try to folow the steps .
But .. i don't know if i have lag fix . I think i do , and if i do omg , i have to instal darky's rom , and after that what?

DjLittle said:
@ rschenck thank's but you have to understand that some of us work from early in the morning to the night , and i don't have the time to stay and read all the sticky posts and all the posts.
Thats ok but your risk is vastly increased to damage your phone if you dont understand .
But .. i don't know if i have lag fix . I think i do , and if i do omg , i have to instal darky's rom , and after that what?
Dont install anything .
You have a custom rom undo any lagfix build a rom in rom kitchen and flash it .
http://forum.xda-developers.com/showthread.php?t=817703
http://romkitchen.org/sgs/?s=generator
TRY
rom XWJS8 wipe CSC to suit your location
Kernel Hardcore modem JPY
Apps themes tweaks etc you choose
half an hour to build and install .
jje
Click to expand...
Click to collapse

thank you
But i don't know how to undo lag fix

DjLittle said:
thank you
But i don't know how to undo lag fix
Click to expand...
Click to collapse
In the instructions that came with the lag fix .
Or we need to know what lagfix used .
jje

JJEgan said:
In the instructions that came with the lag fix .
Or we need to know what lagfix used .
jje
Click to expand...
Click to collapse
How do i find out what lag fix was used? What instructions are you talking about?

Lagfix unknown so how do you turn off ???
By reading the instructions that came with that model lagfix .Or finding what was used .
jje

ooook , big bubu ))
I installed the zip pack that was generated from romkitchen , and .... now it stays with the logo on . It dosen't do anything .
It is dead .Omg )
After the instalation was complete i rebooted the system . And now it writes on the screen GALAXY S bla bla ...(THE LOGO) and now it stays like this. It has been 20 minutes . and still like this . What do i have to do ?

Open up Kies, and hook your phone up to the PC. See if Kies will recognise your phone. If it does, format your internal sd card. Then disconnect the phone, drop the battery, put it back in and see if it will boot.

electrotune1200 said:
Open up Kies, and hook your phone up to the PC. See if Kies will recognise your phone. If it does, format your internal sd card. Then disconnect the phone, drop the battery, put it back in and see if it will boot.
Click to expand...
Click to collapse
Thank's , right now i am trying with odin a thing .. and it seems that it works ... for now ) . I wil see what will happen next.
I will tell you soon . I hope i am doing the right thing

Mission accomplished ! I've done it with odin . FW 2.3.3 . Now i have to read some posts where i can find some aplications and better launchers . Thank's a lot guys !

Do i need any lag fix?

2.3.3 probably not .
jje

sim-card not found after installing custom rom

problem SOLVED

I got no back-up by the way. it sayz
IMEI Unknown
battery 999%

Try installing another rom?
if you try out a few roms and they all dont work, then its properly a hardware error.
I am using this one: http://forum.xda-developers.com/showthread.php?t=1032419

First time i installed Fear rom i had the same problem. I simply reinserted the sim card after some cleaning, rebooted the phone and it was all fine again

XabdullahX said:
Try installing another rom?
if you try out a few roms and they all dont work, then its properly a hardware error.
I am using this one: http://forum.xda-developers.com/showthread.php?t=1032419
Click to expand...
Click to collapse
installing now

IMHO, first thing to do is check your SD Card. Do you see it under CWR ? Can you plug it into another material ? PC, phone, Camera, Nintendo DS, etc... ?
f you can see it somewhere else, then your flash gone bad. Just flash again.

i dont completely understand what you mean, but i can see my SD Card in my pc, other phone, and in CWR.

bbkdhumm said:
IMHO, first thing to do is check your SD Card. Do you see it under CWR ? Can you plug it into another material ? PC, phone, Camera, Nintendo DS, etc... ?
f you can see it somewhere else, then your flash gone bad. Just flash again.
Click to expand...
Click to collapse
SIM, not SD-Card...

i think imma flash this via smartflash
http://forum.xda-developers.com/showthread.php?t=1035041
the original rom
hope it works

unfnknblvbl said:
SIM, not SD-Card...
Click to expand...
Click to collapse
my sim works in my other phones

I was pointing out to bbkdhumm that he got your post mixed up. I'm sorry, but I can't help with your problem, aside from suggesting you flash a different ROM. I've not had any problems with the one from www.romkitchen.org

imma try the stock dutch rom... downloading now. its 633mb so still downloading but i hope it works... ive read it does a complete reset..

Fixed... Me so happy!!
i worship paul (no homo)

u wrote something with wrong imei....
did u check it that it is a correct imei?

yes. the imei is correct.. its working again
its aactually a hard factory reset i think...

i´m happy with you

thankS

Oups !Sorry, I'm a f***ing idiot !

naw... u not...

[Q] Bootloop after Kernel Flasher use -_-

Hey everyone, after a year of not caring about any mods or hacks for my galaxy s I thought that I should get one problem out of this world.
I am talking about the constantly flashing led buttons...so I stumbled upon BLN control which needed a special kernel, so I downloaded the promoted Kernel Flasher and the .tar file of the manual site of BLN (the site i was linked to via my mobilephone when opening BLN).
That tar file was called something with odin in it (not the "update" version). I used odin back in the days I remember...anyways, while in kernel flasher i inserted that tar file...and the kernel was installed, auto-reboot and since then it restarts on loops. Loads the desktop, checks for sd cards...you can scroll around a bit...then after 8 seconds it gets black and restarts.
I am really desperate here, because my exams are coming up and due to my carelessness I have this nasty problem to solve on top of that. Arghh...
There are some appz with important information in it (like notes), a clear swipe would be the absolute last resort here.
Can I recover my old kernel (didn't backup my old one), or replace/update with a new, working one? Through the recovery menue?
If you'd be so kind to step by step explain how it should be done? and I will cease any modding, hacking after this one. -_-
It is a rooted 2.3.3 Gingerbread kernel, as far as i can remember.

Can you go to download mode ? if so flash the .tar file as pda in odin. MAKE SURE IT'S THE RIGHT KERNEL FOR YOUR DEVICE.
Sent from my GT-I9000 using XDA App. i helped? hit the thanks button. Thanks

Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.

Nairozed said:
Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.
Click to expand...
Click to collapse
do you want to use a Samsung stock kernel or do you wanna give a try to Cyanogenmod stable or something like that?
Last time I saw samfirmware sites I saw that 2.3.6 was avaible for Europe...
Well... that's your choice!!!

Will I be able to keep the functionality of BLN, that keeps those led-buttons at the bottom turned off?

With a Samsung Stock-Kernel you will loose the BLN-Feature. You can try flashing another Kernel which has implemented this feature too. I used the SemaphoreKernel which has this feature. (works on all GB-Roms)
If you try Cyanogenmod you will loose BLN too. But Cm has a feature called "LED-Notification" which does the same as BLN does.

So, I downloaded update-cm-7.1.0-GalaxyS-signed.zip should I go on with this manual? http: //jjpda.blogspot.com/2011/10/how-to-install-cyanogenmod-71-on-i9000.html ?
Or do I have to go back from a root to apply this new one?
Which program do I use on PC, and which one on my phone again? :O

Search in Cyanogenmod wiki for i9000,you will find all the steps to follow..
You need 1st TO root the phone, than install ROM manager, install CWM, place CM7 zip on internal SD, remove SIM And ext. SD,reboot into recovery, wipe data, cache and dalvik, flash CM7 zip and reboot.
Don't forget:
-fully charge your phone before starting
-read CM7 wiki page
Hope this might help you.
sent from my i9000 running ICS 4.0.3

Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\

Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
I always leave my sim card in my phone when I flash.. are you just getting no cell signal? Or just trying to get your contacts off of it?
Sent from my GT-I9000 using xda premium

Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
Can you post a screenshot about info of your phone with CM7?
(long press power button and select Screenshot when you are in the info menu )

Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!

try to flash cm7 radio .

What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm

Nairozed said:
Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!
Click to expand...
Click to collapse
O_O OMG!
Seems no SIM card detected....
Very very strange...
Like the fact that you flash GApps and you can't see market...
Did you wipe cache and Dalvik cache?
+ try this:
"Settings -> Location&Security -> Set up SIM card lock -> Lock SIM card (uncheck)"
I found that in some cases might help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:31 PM ----------
primanka said:
try to flash cm7 radio .
Click to expand...
Click to collapse
Nairozed said:
What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm
Click to expand...
Click to collapse
Take a look here and try with JVK if it works...

I wiped everything possible in recovery mode, flashed that ominous JVC rom, then googleappz. At least now I can shop in the android market. But the sim card still is in the land beyond imagination.
Has my sim card been...bricked?
Which other flash files do you suggest me to try out now? Or should I get me another sim card from the store?

Everything's solved! And the solution was too easy to believe...
Checked the sim card slot more deeply and found out that the sim card wasn't placed in correctly. I seem to have taken it out through the flashing process and in all the "commotion" quickly put it in wrong. Sorry for the big fuzz, everyone.
At least now I got some training with flashing.
So, should I reflash the first cyanmod again?

no you don't need to reflash the rom, cause you already flashed twice plus wiped all possible options...!
I just didn't want to ask you to check if the SIM card was insert properly,
but that would solve your issue faster...!
Enjoy CM7!

Well, I had some time to try out the performance and stability of this mod.
Games definitely are running with a some lag (also reaction time of the sensor to control your game, makes them unplayable).
I tried to uncheck the Cyanmod setting option "Dithering" and "JIT"..also put the cpu settings to "performance".
To be sure I formatted internal SD and external SD.
My phone had some problems finding my external SD, but some guy on the net told to go to Cyanmod settings, applications, use internal memory...and now I use my external SD for everything I guess?
Maybe this is because everything is in slowmo?
Maybe the firstly flashed mod was more...stable?

So, my question would be how to use my internal sd card, maybe it gets faster then?
http: //forum.xda-developers.com/showthread.php?t=1353707
What about changing to kernel infinity?

[Questions/Troubleshooting][ROM] BigBear X Series

[SIZE=+3]This thread has been created strictly for
Questions & Troubleshooting[/SIZE]
[SIZE=+2]Specific to[/SIZE]
​
[SIZE=+2]This thread has been created for people to share issues, question and help
while using these versions of​[/SIZE]
BigBear X Series
PLEASE make sure to thank BigBearEvo for the dedication to this BigBear X Series ROM
*
Please do not clutter the Development thread with non related development chatter​

So, do i have to flash supercharger, it aint inbuilt?

kashttl said:
So, do i have to flash supercharger, it aint inbuilt?
Click to expand...
Click to collapse
It isn't

No offesne, but i love to be clear with what i do. So, another question. Will it affect your phone in any matter (except charging) if u flash different ROMS sonstantly day after day???

No. I've flashed 9 roms in 1 day. Has no effect what so ever.
What u Ned to do is read threads clearly. If people add things seperate it means there not built in.

Sir i have done exactly u said and installed v12 but my salsa sits on htc logo for ever .
I like ur rom and appreciate ur work and already thanked for that.but pl help me on this as this is not working.

amandim said:
Sir i have done exactly u said and installed v12 but my salsa sits on htc logo for ever .
I like ur rom and appreciate ur work and already thanked for that.but pl help me on this as this is not working.
Click to expand...
Click to collapse
It takes time for it to boot after flashing a new ROM. Around 5-10 mins on this ROM .. i guess..

U didn't ie it would have booted up. Describe what u did in order please....in your words and not from the list

Issue with the EXT3 partition
Hi There,
Thank you for this ROM:good:. I have been using this rom from few months. It was all ok but from few days I have this problem Whenever I reboot the ext3 partition vanishes and I am back to 150mb. I have followed your guide on how to create ext3 partition. I have tried all the roms I end up with the same problem. Please help

louis.eleazar said:
Hi There,
Thank you for this ROM:good:. I have been using this rom from few months. It was all ok but from few days I have this problem Whenever I reboot the ext3 partition vanishes and I am back to 150mb. I have followed your guide on how to create ext3 partition. I have tried all the roms I end up with the same problem. Please help
Click to expand...
Click to collapse
Have you installed anything new? used anything new? Your ext3 will only vanish if your sd is corrupt, you used link2sd and created the link while already using data2sd.

BigBearEvo said:
Have you installed anything new? used anything new? Your ext3 will only vanish if your sd is corrupt, you used link2sd and created the link while already using data2sd.
Click to expand...
Click to collapse
That was quick reply. I have 2 sd cards 4gb class 4 and 16gb class 10. I have tried with both the sd cards. :fingers-crossed:I will try again with new installation and document every step as I do. Thank you.

Problem installing BBx ROMs
Hello, and firstly, great work and very useful tutorials BB.
I have a Salsa, earlier in the year I updated HBOOT, Unlocked bootloader via the HTC website, so am now S-ON, Rooted, CWM and was running the un-official CM7 with the memory fix.
I tried to put BBx V13 on, 3 wipes, but it sits on the white screen with green HTC, I gave up after 30 mins and pulled the battery as holding the power button didnt work.
So i then put ParanoidAndroid2.99 on, no problems booted in 2 mins.
I then wiped and tried to install BBx Holo3a, same problem with sitting on the HTC white screen, 30 minutes and had to pull the battery.
Could there be a difference with the hardware or S-ON, I work in a lab and follow procedures word for word, could there be something I have missed?
Thanks,
Mike
**Additional, I have just found this thread http://forum.xda-developers.com/showthread.php?t=2320012&highlight=paranoid+android
Could the problem be that I have S-ON but there is no boot.img in the BBx ROM but there is in CM7 ?

X -series GPS
Hi all,
I have been using the v12 of BBE X-Series ROM for a while now and love it, but for some time the GPS has not worked. Can someone please help? The GPS worked initially (But with v13 it did not - so thats why I changed back to v12). Now it is not working at all, but it is turning on according to the settings in the phone, however the Icon does not appear. I have perflock installed also, but that was same at the start when it was working.
All GPS apps think it is on but no GPS app gets a signal and never does the icon pop up on the top bar.
I recently updated Busybox and had not re-installed the new version so I thought maybe this could have been the problem but when I re-installed (lastest) it still does not work. I update apps quite a lot and possibly something else changed that was needed?
Everything else works fine in this v12 except WiFi hotspot (which crashes in the settings) but I have found Barnacle as a work around for this although I can never update the password. Any suggestions on this would be appreciated too .
Also if all things work in another ROM I am happy to change to it but would rather a fix.
Long time lurker.