Database Develop

Need help !!!!

I just flashed the latest JAC's hero. Everything seemed fine ( I did wipe cuz I went from CM 4.0.4 ), but now I got stuck at the HTC logo. I don't think I am really stuck cuz I just received a phone call and I answered it fine. I can even unlock the screen by dragging down but after that, it's the HTC logo, I can't get pass ! Please help !!!

Bad flash/corrupt download? You have the correct partitions and radio/spl right?

evilkorn said:
Bad flash/corrupt download? You have the correct partitions and radio/spl right?
Click to expand...
Click to collapse
Yes, I have 3 partitions ( FAT32/EXT3/32mb-SWAP ). I did flashed the Haykuro's SPL so there's hell no way it's because of my redio or SPL. Thanks for replying anyway

Wipe, reflash, it's a bad launcher, well rosie. Might be a bug, if it happens again, change roms

gridlock32404 said:
Wipe, reflash, it's a bad launcher, well rosie. Might be a bug, if it happens again, change roms
Click to expand...
Click to collapse
Well I don't think it's a bootloop since all the buttons light up and the phone went to sleep ! Never had this before, it's just weird though

It's not a bootloop, I just told you what it is, I had it happen on a cyan rom with the advance launcher

gridlock32404 said:
It's not a bootloop, I just told you what it is, I had it happen on a cyan rom with the advance launcher
Click to expand...
Click to collapse
It's just hanging there on the HTC screen ! What do you suggest ? I read from the development section and they said it took a while to get it booted up the first time

te_quiero_forever_girl said:
It's just hanging there on the HTC screen ! What do you suggest ? I read from the development section and they said it took a while to get it booted up the first time
Click to expand...
Click to collapse
that is correct how long did you let it sit? It can take up to about 15 minutes to get the setup screens.

dude it just takes a while for your phone to get used to hero. this happens every time i flash one but after half an hour it gets hella fast. give it time

Thank u guys, I waited patiently and the phone finally booted up ! My only concern is that I just reformatted my SD to get 96 MB SWAP. I tried to upgrade to ext3 by typing upgrade_fs but when I pressed print to double check, it was still ext2 =.=" Any suggestion ?
Nvm, I did it though ( it was just a bad mistake when I entered the script in parted )

Reflash HTC Wildfire, 3 Net Locked

Hey Guys, My HTC wildfire is net locked to 3, i have tried several times to install a custom rom via unrevoked 3 tool.
This is the process i went through:
downloaded rom(s) - have tried several
copied to SDcard
ran unrevoked 3
backed up
reset to factory settings + then wiped cache partition
install from SDcard > navigated to zipped rom
installation flashed up for a second then quit, does this everytime on any rom
reboot
checked software name everytime and is only coming up saying 2.1-update 1
any ideas on how i can get either unlocked 2.1 ROM or 2.2 ROM installed? is there anything i am doing wrong / missing
many thanks
w1ngs

You need to first debrand your WF. You do this by creating a Gold card.
I did mine by the Modaco method.
Google debrand wildfire and you'll see.
Good Luck

Ok nevermind, have found it, many thnks, now sitting with my debranded phone, flash time

Hmmh, still the same result when i came to flash the ROM. It opens then quits a second later. I now have a debranded phone.
Any ideas?

Well I can't offer you a solution but I can tell you that my Wildfire works on 3 without any need for the gold card method. Make sure you have added 3 network settings in wireless network settings. Sometimes custom ROMs don't pick this up.
Also, at the risk of sounding insulting, make sure you have paid your bill. I thought I had my bill set to direct debit but either the 3 customer service goons failed at setting this up or my bank wouldn't allow it. So for a couple of days I was thinking that my custom ROM wasn't working but actually it was 3 had cut me off.

just a small point here but a fairly substantial one, i am talking about flashing the wildfire to a different ROM, not having network issues, your comment was unhelpful as perhaps you did not read the original post. Thanks

Can anyone help?

angelw1ngs said:
Can anyone help?
Click to expand...
Click to collapse
Try reflashing as I had that problem once. And try a different memory card as I have killed 3 mem cards upto now!

angelw1ngs said:
just a small point here but a fairly substantial one, i am talking about flashing the wildfire to a different ROM, not having network issues, your comment was unhelpful as perhaps you did not read the original post. Thanks
Click to expand...
Click to collapse
Just a small point here but a fairly substantial one, you said it was net locked, as in network issue.

Did you click install zip from sd card or apply update.zip

A Few Questions

First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!

TheMadxtremist said:
First , my NAND flashed android works good and fast but the WiFi doesnt work.
The camera quality is bad.
and after exactly two days , when i switched on my "android" , the android keeps saying no SIM card .
My kernel is 2.6.32.9
Help !!
Click to expand...
Click to collapse
Which kernel did you use? To be honest, go back to Windows if following simple guide is too difficult. And camera quality won't be any better in Android.

The only reasonable kernel for NAND is the kernel with separate cache partition. On each other appear errors sooner or later. Install this kernel, reinstall the system and apply the update.
And do not start constantly new threads to the questions on which someone already replied before. Read and search forum!!

You people dont get it .
My kaiser is and android F-O-R-E-V-E-R.
Because i flashed it using kaisercustomruu.
and the power button+camera+reset button dont work for me.
i think there's a prob with camera button that's why.
so , now , how do i flash the kernel ?

Please help !!
i cant get into bootloader .
is it the camera button then ?
tell me ?

No, you don't get it man! Stop beeing a noob and learn to follow simple guides! You need to copy KAISIMG and KAIDSIAG (make sure to unpack ) to your memory card. After that you can flash with "Power + Camera + Reset". Is this so hard to Google and find what you need? Also, to make sure you won't make any more mistakes, check if you have HardSPL installed and apply all updates from kernel you used. I recommend you this kernel.
http://forum.xda-developers.com/showthread.php?t=1152219
Man, I just hate those guys who are noobs and consider themselves to be experienced users .

Mr. Noob Hater , were'nt u a noob ?
and i told u i have tried that and it doesnt work................

Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?

TheMadxtremist said:
Actually , i have kaisimg and kasdiag in my SD and tried to flash using "power+reset+camera" . the phone starts normally and android still runs :O
now, any solutions ?
Click to expand...
Click to collapse
Do you have HardSPL? And remember to keep Camera button fully pressed, not just in half.

It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?

TheMadxtremist said:
It all started after the HardSPL
i have hardspl 3.34
radio 1.70.19.09
camera button is fully pressed according to me.
And why doesnt it accept my sim card ?
Click to expand...
Click to collapse
What do you mean it doesn't accept your SIM card? Some screenshots? Anyway, if Camera button doesn't work for you, then you're stuck with this kernel forever . Which one did you flash? I'll give you proper update for it.

Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!

TheMadxtremist said:
Valentine 1.0.2
And it says Insert SIM card even when it is already there !
and now you know , i tried reinstalling it , but when screen says welcome and i am about to configure the phone , it says insert SIM card and doesnt let me proceed .
STUCK !!
Click to expand...
Click to collapse
I asked you about kernel! Whcich KERNEL did you flash?

I dont remember correctly , but i think i flashed kernel with separate cache partition and modified cpu and gpu with atools.....

Now , i only need an update .............
i figured out and rectified the problem as well......
Was pretty hard......
AND THANK YOU MR> NOOB HATER
waiting for wifi update.....

go to settings/about phone and check kernel version. If show something like 2.6.32.9 N50Vc #39 Kernel you can find androidupdate.tar packed with kernel in Cache Kernel & ATools.zip. http://forum.xda-developers.com/showthread.php?t=1152219.
Can you share what was wrong with the sim? (for future"generations" with the same problem)

2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?

No. Rather, it will not work. You do not have a scoot's kernel... Maybe someone else remember your kernel signature and give you update.

TheMadxtremist said:
2.6.32.9 [email protected] #285....
and i think there should not be any problem with the sim cards.....
i dropped my phone by mistake it hit the ground with a THUD !!
i think the sim problem was this thing
and can i use this update for my kernel ?
Click to expand...
Click to collapse
Man, you just proved that you're a huge noob. You flashed a kernel with RUU and you don't even remember which one was that. LOL . Looks like you're out of WiFi forever now . I've never seen such kernel anywhere...

TheMadxtremist, If I were you I'd tried to find the reason why camera button not working. You wrote that you dropped phone, so probably this is some hardware failure(flex tape, switch, something else). If you have any experience try to disassemble phone and fix this or find someone who can do it for you. Because even if someone will give you update your phone will be unstable with this kernel.

[Q] Bootloop after Kernel Flasher use -_-

Hey everyone, after a year of not caring about any mods or hacks for my galaxy s I thought that I should get one problem out of this world.
I am talking about the constantly flashing led buttons...so I stumbled upon BLN control which needed a special kernel, so I downloaded the promoted Kernel Flasher and the .tar file of the manual site of BLN (the site i was linked to via my mobilephone when opening BLN).
That tar file was called something with odin in it (not the "update" version). I used odin back in the days I remember...anyways, while in kernel flasher i inserted that tar file...and the kernel was installed, auto-reboot and since then it restarts on loops. Loads the desktop, checks for sd cards...you can scroll around a bit...then after 8 seconds it gets black and restarts.
I am really desperate here, because my exams are coming up and due to my carelessness I have this nasty problem to solve on top of that. Arghh...
There are some appz with important information in it (like notes), a clear swipe would be the absolute last resort here.
Can I recover my old kernel (didn't backup my old one), or replace/update with a new, working one? Through the recovery menue?
If you'd be so kind to step by step explain how it should be done? and I will cease any modding, hacking after this one. -_-
It is a rooted 2.3.3 Gingerbread kernel, as far as i can remember.

Can you go to download mode ? if so flash the .tar file as pda in odin. MAKE SURE IT'S THE RIGHT KERNEL FOR YOUR DEVICE.
Sent from my GT-I9000 using XDA App. i helped? hit the thanks button. Thanks

Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.

Nairozed said:
Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.
Click to expand...
Click to collapse
do you want to use a Samsung stock kernel or do you wanna give a try to Cyanogenmod stable or something like that?
Last time I saw samfirmware sites I saw that 2.3.6 was avaible for Europe...
Well... that's your choice!!!

Will I be able to keep the functionality of BLN, that keeps those led-buttons at the bottom turned off?

With a Samsung Stock-Kernel you will loose the BLN-Feature. You can try flashing another Kernel which has implemented this feature too. I used the SemaphoreKernel which has this feature. (works on all GB-Roms)
If you try Cyanogenmod you will loose BLN too. But Cm has a feature called "LED-Notification" which does the same as BLN does.

So, I downloaded update-cm-7.1.0-GalaxyS-signed.zip should I go on with this manual? http: //jjpda.blogspot.com/2011/10/how-to-install-cyanogenmod-71-on-i9000.html ?
Or do I have to go back from a root to apply this new one?
Which program do I use on PC, and which one on my phone again? :O

Search in Cyanogenmod wiki for i9000,you will find all the steps to follow..
You need 1st TO root the phone, than install ROM manager, install CWM, place CM7 zip on internal SD, remove SIM And ext. SD,reboot into recovery, wipe data, cache and dalvik, flash CM7 zip and reboot.
Don't forget:
-fully charge your phone before starting
-read CM7 wiki page
Hope this might help you.
sent from my i9000 running ICS 4.0.3

Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\

Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
I always leave my sim card in my phone when I flash.. are you just getting no cell signal? Or just trying to get your contacts off of it?
Sent from my GT-I9000 using xda premium

Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
Can you post a screenshot about info of your phone with CM7?
(long press power button and select Screenshot when you are in the info menu )

Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!

try to flash cm7 radio .

What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm

Nairozed said:
Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!
Click to expand...
Click to collapse
O_O OMG!
Seems no SIM card detected....
Very very strange...
Like the fact that you flash GApps and you can't see market...
Did you wipe cache and Dalvik cache?
+ try this:
"Settings -> Location&Security -> Set up SIM card lock -> Lock SIM card (uncheck)"
I found that in some cases might help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:31 PM ----------
primanka said:
try to flash cm7 radio .
Click to expand...
Click to collapse
Nairozed said:
What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm
Click to expand...
Click to collapse
Take a look here and try with JVK if it works...

I wiped everything possible in recovery mode, flashed that ominous JVC rom, then googleappz. At least now I can shop in the android market. But the sim card still is in the land beyond imagination.
Has my sim card been...bricked?
Which other flash files do you suggest me to try out now? Or should I get me another sim card from the store?

Everything's solved! And the solution was too easy to believe...
Checked the sim card slot more deeply and found out that the sim card wasn't placed in correctly. I seem to have taken it out through the flashing process and in all the "commotion" quickly put it in wrong. Sorry for the big fuzz, everyone.
At least now I got some training with flashing.
So, should I reflash the first cyanmod again?

no you don't need to reflash the rom, cause you already flashed twice plus wiped all possible options...!
I just didn't want to ask you to check if the SIM card was insert properly,
but that would solve your issue faster...!
Enjoy CM7!

Well, I had some time to try out the performance and stability of this mod.
Games definitely are running with a some lag (also reaction time of the sensor to control your game, makes them unplayable).
I tried to uncheck the Cyanmod setting option "Dithering" and "JIT"..also put the cpu settings to "performance".
To be sure I formatted internal SD and external SD.
My phone had some problems finding my external SD, but some guy on the net told to go to Cyanmod settings, applications, use internal memory...and now I use my external SD for everything I guess?
Maybe this is because everything is in slowmo?
Maybe the firstly flashed mod was more...stable?

So, my question would be how to use my internal sd card, maybe it gets faster then?
http: //forum.xda-developers.com/showthread.php?t=1353707
What about changing to kernel infinity?

Big problem

My phone is vibrate continuously , i tried to remove the battery , the SIM card , microsd and i reflash a stock rom and still vibrate. First time the phone didn't vibrate in Download Mode but now is restarting and vibrating. I had a stock rom with removed bloatware and no overclock , some apps , no tweaks :| , Could some say what should i do ?

RedLynx90 said:
My phone is vibrate continuously , i tried to remove the battery , the SIM card , microsd and i reflash a stock rom and still vibrate. First time the phone didn't vibrate in Download Mode but now is restarting and vibrating. I had a stock rom with removed bloatware and no overclock , some apps , no tweaks :| , Could some say what should i do ?
Click to expand...
Click to collapse
first thing if it is booting normal and running just continues vibrate take care maybe it is hardware so install triangle away rest the counter go cwm recovery wipe everything then download mode flash stock rom that should solve the problem or remove battery and sim and sd for the next day then try if not do those steps and go to the Samsung warranty center
Sent from my GT-S6500D using Tapatalk 2

Thanks man , i finally try to install the rom for my country and i made a reset with Triangle Away.
It's BACK , for a few minutes worked now again.

This is the development thread, not support thread
Sent from my GT-S6500D using Tapatalk 2

aamj1997 said:
This is the development thread, not support thread
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
and what is distributing you ha :screwy: so why is this forum ha again:banghead:?
Sent from my GT-S6500D using Tapatalk 2

Sorry for posting here, maybe could someone move it to Q&A , just now i find the subforum.
There is no one who could help me ? I tried a lot of methods but no one succeded.

NiceIceDice96 said:
and what is distributing you ha :screwy: so why is this forum ha again:banghead:?
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
damn '96 explains so much for me
this is a DEV sub forum , not a Q&A sub forum , can't you guys read?

I just found the Q&A a few days ago..
I solved partially the problem with the vibration.

RedLynx90 said:
Sorry for posting here, maybe could someone move it to Q&A , just now i find the subforum.
There is no one who could help me ? I tried a lot of methods but no one succeded.
Click to expand...
Click to collapse
Did you ever make a nandroid backup (before this problem was happening)? You could try restoring to that. Otherwise, I hate to say it, but it might just be a hardware problem... I haven't done much with my mini 2 yet when it comes to flashing etc., but judging from my experience, there shouldn't ever be a reason for it to vibrate when it's in recovery mode. I might be wrong, but I don't think the drivers for the vibration motor are even loaded in recovery - so something very odd would have to happen software-wise - assuming that the drivers are not being loaded in recovery - for that to happen. If you still have a warranty on your device, I would restore everything to stock, reset the binary counter (with triangleaway or whatever it's called - I'm not exactly sure how it works, all I know is that it does work), and return it for warranty service. If the warranty is expired, then you could try to take the phone apart (don't blame me if something goes wrong, though) and see if there's anything obvious that might be causing problems. Other than that, I don't really know what else to say...

I restored the best backup i had , now it seems ok , if i don't push the power button and i close the screen with a application there are no problems , i removed the cover i take out the vibration and still doesn't work , now works fine if i don't touch the power button , a few days ago i couldn't enter into cwm or download mode , when i entered the phone was restarted and i couldn't do anything , now i have stock rom , removed bloatware , no oc and works fine and i have a application to turn off the screen