Related
Hello Everyone,
I'm looking for either a confirmation that my my WLAN is bad, or suggestions on other things I should try before taking it back in for replacement.
Searching and browsing through the forums I didn't see anyone mention any of the problems I'm having so I'm assuming I'm the only one (or one of very few) that bought a Kaiser with a defective Wifi radio.
Here's the symptoms:
I tried connecting to my wireless connection at home maybe a day or two after I bought my Tilt (last Friday). My home connection is draft 802.11n with WPA2-PSK security.
So I enable the WLAN and it detects my Wifi network and it asks for the key. I input it and then it tries to connect, but... it never does. I tried it a few times consecutively and it still didn't work (I get the animating arrows and the 'halo' around the beacon, but then it goes away, and it just keeps doing that). Now, I've seen this before with on my XV6700 with a beta ROM of WM6, but I know well HTC and AT&T wouldn't release something with broken WPA/2 support. At least HTC, I thought...
So I unlocked my Tilt and loaded the factory Kaiser ROM I downloaded from here, and well, WPA2 didn't work on it either. Weird, I thought, so I searched forums and no one mentioned any of this. So I changed my security settings on my network to WPA-PSK (from WPA2) and that made no difference at all... I don't want to bore y'all with everything else I tried, but to sum it up, I then tried a WPA fix I found on PPCGeeks, but that just ended up making my WLAN staying disabled, so I unintalled that and I decided I would try it with a WEP or Open wireless network.
Well, this morning I did just that and even when I try to connect to a wireless connection with WEP, I get the same behavior when I tried this at home with WPA. I've triple checked the WEP key, and I know it's right.
I haven't tried it on an Open network yet, but I'm assuming I'm going to get the same results. I'll have to find a wireless router no one's connected to so that I can try this out, but it might take me a while. Should I even waste anymore time on this? Anyone else here having (or had) the same problem?
I might start loading the AT&T ROM on this soon so I can take it back, but if any of you have any suggestions, I'm all ears.
Wow. Am I the only one on here who's having this problem?? Lucky me, I guess... :S
Anyway, I just tried connecting to a public and open wifi network here in SF, but my Kaiser still wouldn't connect. Guess that confirms it: my WiFi adapter is defective.
Anyone know if I can get it replaced in a different store from where I purchased it, and what I need to take (hope it's just the phone)?
d0ubl3_d1zzl3 said:
Wow. Am I the only one on here who's having this problem?? Lucky me, I guess... :S
Anyway, I just tried connecting to a public and open wifi network here in SF, but my Kaiser still wouldn't connect. Guess that confirms it: my WiFi adapter is defective.
Anyone know if I can get it replaced in a different store from where I purchased it, and what I need to take (hope it's just the phone)?
Click to expand...
Click to collapse
just tried my wifi on the tilt ... works fine out of the box (to my home secured wireless network)
d0ubl3_d1zzl3 said:
Hello Everyone,
I'm looking for either a confirmation that my my WLAN is bad, or suggestions on other things I should try before taking it back in for replacement.
Searching and browsing through the forums I didn't see anyone mention any of the problems I'm having so I'm assuming I'm the only one (or one of very few) that bought a Kaiser with a defective Wifi radio.
Here's the symptoms:
I tried connecting to my wireless connection at home maybe a day or two after I bought my Tilt (last Friday). My home connection is draft 802.11n with WPA2-PSK security.
So I enable the WLAN and it detects my Wifi network and it asks for the key. I input it and then it tries to connect, but... it never does. I tried it a few times consecutively and it still didn't work (I get the animating arrows and the 'halo' around the beacon, but then it goes away, and it just keeps doing that). Now, I've seen this before with on my XV6700 with a beta ROM of WM6, but I know well HTC and AT&T wouldn't release something with broken WPA/2 support. At least HTC, I thought...
So I unlocked my Tilt and loaded the factory Kaiser ROM I downloaded from here, and well, WPA2 didn't work on it either. Weird, I thought, so I searched forums and no one mentioned any of this. So I changed my security settings on my network to WPA-PSK (from WPA2) and that made no difference at all... I don't want to bore y'all with everything else I tried, but to sum it up, I then tried a WPA fix I found on PPCGeeks, but that just ended up making my WLAN staying disabled, so I unintalled that and I decided I would try it with a WEP or Open wireless network.
Well, this morning I did just that and even when I try to connect to a wireless connection with WEP, I get the same behavior when I tried this at home with WPA. I've triple checked the WEP key, and I know it's right.
I haven't tried it on an Open network yet, but I'm assuming I'm going to get the same results. I'll have to find a wireless router no one's connected to so that I can try this out, but it might take me a while. Should I even waste anymore time on this? Anyone else here having (or had) the same problem?
I might start loading the AT&T ROM on this soon so I can take it back, but if any of you have any suggestions, I'm all ears.
Click to expand...
Click to collapse
This is what I did. Start->settings->connections tab->WiFI. Now you should see your routers name there with the signal bar next to it. Tap AND Hold the name, then go to settings or edit(I forget), then click NEXT, uncheck the box that says "the key is automatically provided"(thats for open access routers/networks that dont require codes). Then type in your code & make sure you specify what key # it is. click next and youre done. You should be able to connect.
silly question here. is your router broadcasting 802.11b or g? the wifi won't connect to anything else.
You might also check your AP to see if it's not broadcasting its SSID to the world (a common security setting). I couldn't connect until I enabled broadcast on my AP, set the network up, and then went back and disabled SSID broadcast.
Why in the hell this is a problem in the first place is beyond me, but this is the third smartphone/PDA with wireless that I've had to do that for. And every time, once the device found the network once, it never had a problem finding it again.
Believe me. I tried everything in the WiFi settings page. I edited the settings, removed them and added them again, and like I said before I even went and changed my security settings on my router (which to answer your question, zeta, it broadcasts in: n, g, and b. Same router worked with my Apache/XV6700).
Anyway, I stopped by the store where I bought it today and they told me that as far as he can tell, that does qualify for a replacement. The problem is they don't have any in stock to replace it with, and he has no idea when they'll be getting more in. They only received 2 on launch day, and I bought one of those. He did mention that I can get it replaced at any store, however, but they all might be in the same boat.
Guess I'll try another store tomorrow, but if not I guess I'll have to go through AT&T's tech support (don't like the sound of that) and get it replaced through them. So I guess this means I might have a few days to mess around with the phone and even try some risky thangs.
So if any of you developers and hackers, er, I mean tweakers need some1 to test something, I can be that guinea pig (for a while at least)... Just give me a shout.
To troubleshoot your wireless connection always try ruling out as many other factors as possible. So put your router to NO security (temporarily ofcourse) and have it broadcast 802.11g. Also make sure you add the mac address of your device to the list in your router, if it uses mac address filtering. Try connecting to it with a laptop and see if that goes fine. Work systematically...
PerfAlbion said:
You might also check your AP to see if it's not broadcasting its SSID to the world (a common security setting). I couldn't connect until I enabled broadcast on my AP, set the network up, and then went back and disabled SSID broadcast.
Why in the hell this is a problem in the first place is beyond me, but this is the third smartphone/PDA with wireless that I've had to do that for. And every time, once the device found the network once, it never had a problem finding it again.
Click to expand...
Click to collapse
I have a similar Problem, your solution works partly for me:
As soon as I enable the AP to broadcast it's ID, Kaiser connects.
But as soon as the ID is hidden, it does not connect.
Weird.
Is it a security problem if the ID is broadcasted, provided I use WPA2-PSK/AES?
Thanks
V
No. Hiding the SSID really only protects you from folks that are wandering around without any tools. Open up a more fully featured scanner, and it'll pull the SSID out of the air. The encryption is much, much more important.
And I also wouldn't bother with MAC filtering. Changing the MAC address is usually a software setting, so it's not all that much additional security. WPA/WPA2 are much better solutions.
Yeah, the hidden SSID is not an issue with me, since I don't mind broadcasting it at home. Not too paranoid about it. If someone *really* wanted to sniff and break into my network, they could. Don't do much important and highly confidential stuff at home anyway.
Plus, like Perf mentioned, there's software out there, even for PocketPCs, that will find so-called "hidden" SSIDs. Thanks for your suggestions, anyway.
d0ubl3_d1zzl3 said:
Yeah, the hidden SSID is not an issue with me, since I don't mind broadcasting it at home. Not too paranoid about it. If someone *really* wanted to sniff and break into my network, they could. Don't do much important and highly confidential stuff at home anyway.
Plus, like Perf mentioned, there's software out there, even for PocketPCs, that will find so-called "hidden" SSIDs. Thanks for your suggestions, anyway.
Click to expand...
Click to collapse
i had no issue connecting to my wrt54g running DD-WRT v23 SP2 with my SSID hidden with WEP enabled. when setting up a new connection, i just entered the name of the connection and then the WEP hex, and it connected flawlessly. Have fun hacking your phone until you can swap?
Mine is not working either. I exchanged the phone and found out that I was the 3rd person with the same problem.
BiPolarXpress said:
Mine is not working either. I exchanged the phone and found out that I was the 3rd person with the same problem.
Click to expand...
Click to collapse
Glad to hear, I'm not the only one.
I exchanged my phone this morning, and I just tried connecting to my wireless network and guess what??
I'm getting the SAME RESULTS.
Now, before anyone goes and tells me that my router is the problem or that it's user error, then tell me: why does my laptop, PS3 and my Wii connect just fine?? I even changed the SSID and WPA key last night and they all connected w/o a problem as well. All except my freaking Tilt.
Can be it a coincidence that I got 2 bad phones? I don't know if I should call the store and tell them to hold up on sending the other phone to HTC.
Which reminds me, I probably should try calling HTC today, but I doubt they'll be much help...
I don't think you're nuts, and I doubt you got two bad phones. But if you want to double-check, take the phone to your local Starbucks or other shop with WiFi and see if it can detect that AP.
But at this point, I'd be inclined to look for a firmware upgrade for your AP. I could be that it's not supporting long or short preambles right (a problem for some devices in the past), doesn't like seeing more than XXX different devices, or just doesn't like your phone much.
Either way, I'm smelling an issue with your AP. I had a US Robotics AP/Router that drove me nuts because it would spontaneously reboot after a random period any time an IPSec VPN was present.
try setting the power mode on best performance. when i do that i stay connected to wifi.
I took both my old I730 and my tilt to the coffee shop before I returned my first tilt. I was able to connect my I730 at the coffee shop and home, but couldn't connect the tilt at either place. I also tried some open AP's in my neighborhood that I have been able to connect to in the past with the same results. Picky phone or bad wifi radios maybe.
Jesus... like the bloke said:
1) Turn off wpa and see if it will connect (it will unless you have set your N router to only use "n") If it won't then send it back.
2) If it does... then turn on WEP 128bit on your router... and use that instead.
WM devices have always had problems with WPA...
Hi all.
I have tried my HTC TyTN II with one Wifi LinkSys WAG54GS Router using WPA and not hidding the SSID and works fine, no problem at all.
Test with one AP from DLink at the office, using hidden SSID and WEP 64 and 128 Bits and no problem at all, works as fine as my LinkSys.
I'm going to try hidde the SSID at home with WPA and WPA2 and post the results later to know if there is a common issue with Kaiser or some freaky coincidence.
Regards.
d0ubl3_d1zzl3 said:
Hello Everyone,
I'm looking for either a confirmation that my my WLAN is bad, or suggestions on other things I should try before taking it back in for replacement.
Searching and browsing through the forums I didn't see anyone mention any of the problems I'm having so I'm assuming I'm the only one (or one of very few) that bought a Kaiser with a defective Wifi radio.
Here's the symptoms:
I tried connecting to my wireless connection at home maybe a day or two after I bought my Tilt (last Friday). My home connection is draft 802.11n with WPA2-PSK security.
So I enable the WLAN and it detects my Wifi network and it asks for the key. I input it and then it tries to connect, but... it never does. I tried it a few times consecutively and it still didn't work (I get the animating arrows and the 'halo' around the beacon, but then it goes away, and it just keeps doing that). Now, I've seen this before with on my XV6700 with a beta ROM of WM6, but I know well HTC and AT&T wouldn't release something with broken WPA/2 support. At least HTC, I thought...
So I unlocked my Tilt and loaded the factory Kaiser ROM I downloaded from here, and well, WPA2 didn't work on it either. Weird, I thought, so I searched forums and no one mentioned any of this. So I changed my security settings on my network to WPA-PSK (from WPA2) and that made no difference at all... I don't want to bore y'all with everything else I tried, but to sum it up, I then tried a WPA fix I found on PPCGeeks, but that just ended up making my WLAN staying disabled, so I unintalled that and I decided I would try it with a WEP or Open wireless network.
Well, this morning I did just that and even when I try to connect to a wireless connection with WEP, I get the same behavior when I tried this at home with WPA. I've triple checked the WEP key, and I know it's right.
I haven't tried it on an Open network yet, but I'm assuming I'm going to get the same results. I'll have to find a wireless router no one's connected to so that I can try this out, but it might take me a while. Should I even waste anymore time on this? Anyone else here having (or had) the same problem?
I might start loading the AT&T ROM on this soon so I can take it back, but if any of you have any suggestions, I'm all ears.
Click to expand...
Click to collapse
I found that I couldn't get my Kaiser to connect to my WPA encrypted LAN - open access and WEP (64 and 128 bit) work fine.
Not sure what the problem is - maybe some incompatibility between the Kaiser and my Netgear router. I've downgraded the security to 128bit WEP for the time being but I'm hoping that there's a fix soon.
When I turn on my phone at work, the wireless connection (open unsecured) connects and works for a few minutes. After some time, it disconnects and without rebooting my phone, I cannot establish a wlan connection.
This is oly the case at work. At home it works flawlessly, but it is another network kind.
Anyone found a solution to this problem? I saw a lot of threads about this but no good answers.
I am using duttys v3.
Not sure. Perhaps there is some sort of time out on your work network for inactive devices, or dhcp ip releases or something weird and "networky" like that?
Or perhaps your phone is going into a power save mode if you are not using it?
Just general ideas, I don't have this particular problem
I dont think many people have this issue! you must not have a setting correct, try downloading KaiserTweak and adjusting the timeout and also take a look at the routers settings I find it strange that a business would have an open network for security issues
austinsnyc said:
I dont think many people have this issue! you must not have a setting correct, try downloading KaiserTweak and adjusting the timeout and also take a look at the routers settings I find it strange that a business would have an open network for security issues
Click to expand...
Click to collapse
I work at the university, and the network is unsecure. You have to enter login and pass at a webpage to gain access.
I cannot reconnect at all once ive been disconnected. So it should have anything to do with kaisertweak or timeouts.
I have tried every setting and combination. I have tried to select work/internet settings. Ive tried to tell the phone its a hidden network / not hidden network. I have tried to use power save / performance mode. Ive tried to turn off 3g, bluetooth, phone (everything basically).
When I tap connect, it says connecting and then it immediately goes to "active" and tries to connect to another network (which I dont have access to).
solwretep said:
When I turn on my phone at work, the wireless connection (open unsecured) connects and works for a few minutes. After some time, it disconnects and without rebooting my phone, I cannot establish a wlan connection.
This is oly the case at work. At home it works flawlessly, but it is another network kind.
Anyone found a solution to this problem? I saw a lot of threads about this but no good answers.
I am using duttys v3.
Click to expand...
Click to collapse
I have worked out the problem.. first if its a WPA enterprise connection, make sure its set to WORK and not INTERNET setting. it will work. my only works with schaps versions not duttys
on my old pda (Acer N50 premium) I had the same problem with my unis network... it would only work (if at all) for a few minutes then nada... but at home it was absolutely fine, quick stayed on and totally responsive... I wonder if it has something to do with the rubbish way unis run their IT...?
Wasted thread
Many do not have this issue.
According to what's being said here by the indiviuals with issues, you're having problems connecting to a certain network...not all networks.
If it were all networks; your device, settings, equipment or rom would be the common denomenator. Since it's one network, it's that network.
Just because a network is or appears to be available, that doesn't mean that you can connect to it.
dwny said:
Wasted thread
Many do not have this issue.
According to what's being said here by the indiviuals with issues, you're having problems connecting to a certain network...not all networks.
If it were all networks; your device, settings, equipment or rom would be the common denomenator. Since it's one network, it's that network.
Just because a network is or appears to be available, that doesn't mean that you can connect to it.
Click to expand...
Click to collapse
no, it could be the phone software. Lets says that a string is added to the registry if the network you are connected to disconnects you; a string that makes the phone cancel connections to the network. And lets assume that the network disconnected you because there is a hidden firewall in the phone software that blocks ping requests, thus making the network believe that the connection is lost and thus disconnecting you. Then we have a moment 22, which is basically something wrong with the phone.
As some readers already pointed out in this "wasted thread", when changing the rom (in one case) or when changing settings from "internet" to "work" (in the second case) there is a great possibility that this problem in fact has to do with phone software and not network.
In my case, it just happens to be neither of the mentioned solutions or any solution that I have found in other threads.
One thing you may want to check is that your wifi is set to max performance. The issue may also be that there is a DNS cache issue, in most cases it can be resolved by manually reconfiguring the connection.
I have been successful in configuring my phone's WLAN to connect to everything from open APS's, WEP, WPA, RADIUS and AP's with proxy redirects, so I can tell you that as with most cases, it's human error.
I have tried max performance.
How do I resolve a dns cache issue? Manually reconfiguring the network did not help (only thing that helps is a reboot).
seattleweb said:
One thing you may want to check is that your wifi is set to max performance. The issue may also be that there is a DNS cache issue, in most cases it can be resolved by manually reconfiguring the connection.
I have been successful in configuring my phone's WLAN to connect to everything from open APS's, WEP, WPA, RADIUS and AP's with proxy redirects, so I can tell you that as with most cases, it's human error.
Click to expand...
Click to collapse
Help!
I have a Netgear DG834T router as provided by Sky. I have one wired and two wireless connections running into it (let's call them WD, WL1 and WL2 respectively).
On the connections page I can see all of them under "attached devices"...but now I want to connect using my Kaiser (actually an O2 XDA Stellar)
What happens...
On the Kaiser, I get an IP address (assigned by DHCP) as normal - but can't access the internet - or at least, can only access it very rarely - http://www.google.com can't be found, but http://www.bbc.co.uk can. No idea why.
On the router, under "attached devices", not only can I NOT see the Kaiser, but WL1 and WL2 also disappear. WD remains visible. The router cannot ping the IP address of the Kaiser (timed out). If I disable WiFi on the Kaiser, then WL1 and WL2 are immediately visible again. Internet connection on WL1 and WL2 works, even when they are not visible.
I HAVE connected to this network before without any problems.
What the hooting heck is going on, and how do I fix it?
Thanks!
Time to troubleshoot! What happens with this phone on another wireless network. We need to determine if it's the phone or the network. Do you have any friends with a phone like this? Can you use their phone on your network? Do you have any ROMs flashed, has this phone ever been on the network without problems?
If the phone works on another router try looking for firmware updates for the router. Those things really do need to be updated often and it could have something to do with that.
Only have access to one network :-(. Might be a couple of weeks before I can access a hotel one or something like that.
Think next door neighbour has similar phone, but different provider...will try if he'll let me!
No ROMS flashed.
It connected fine when I first had it. As far as I know, I've changed nothing since then.
2 out of 4 answered...with an option on three...I'll get back to you as soon as I've beaten up my neighbour and stolen his phone...
Joke!
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
ChumleyEX said:
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
Click to expand...
Click to collapse
You = US, me = UK. We still think the biro is a recent invention...
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Same here
I get the same with the router from sky.
Kaiser says I have an IP address, 192.168.0.5, but the it doesn't show up on the attached devices on the router.
What I find that works is hit renew IP maybe twice until you get a really wierd IP address like
169.254.*.**, actually not sure if I'm picking up another network, but for some reason I don't think I am.
I can then browse the web and sync via wifi.
Really pisses me of that it says that it has an IP address but doesn't connect.
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Yeah I agree, there is something up with that router.
Grey Area said:
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Click to expand...
Click to collapse
with my router.....i have to set the wifi power mode on my kaiser to "best performance", any other setting and i get that "associated to network" ****. been this way every since the hermes and the wizard.
unwired4 said:
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Click to expand...
Click to collapse
No, proxy set-up as the device was bought unbranded in US.
Because there are issues with this router, encryption and media streaming devices, I have only restricted the mac addresses with no encryption.
Still don't know about the 169. ip address beacuse doesn't seem to come up as am ISP.
Now then, how wierd is this?
After all these issues and kind of giving up on it as a bad job, I also noticed that out on the road, my GPRS wasn't working either - TomTom couldn't connect to the "plus" traffic service.
I get on the phone to O2 who told me that my phone hadn't been "provisioned". After one false start where they didn't seem to do anything about it, I have just (literally) had them tell me to go to the O2 Operator settings and tell it to update the "O2 UK Post Pay_GPRS" and reboot.
GPRS now works. And magically, so does my WiFi - IP address negotiated and full access to internet and my router's setup page granted. Working like a charm again.
So - seems to me it's an account setting, and nothing to do with either me poor ol' router or me nice new phone.
For completeness, I was occasionally getting the 169 IP address too, so it sounds like we have EXACTLY the same problem - suggest you get onto your service provider ASAP.
Hi
I recently aquired a htc diamond. I've been having trouble connecting it to my router at home which is a netgear wpn-824.
I have tried a number of steps, tweaking the settings on the diamond e.g. changing the performance to best.
But it seems to jus keep on connecting and connecting then flips to unavailable then tries to connect again. The netgear is on unsecured at the moment so theres no password issue.
It seems like it tries to connect to the router but theres something stopping it at its' last hurdle
Does anyone have an idea or what to with my router. My router is dhcp enabled
I'd REALLY appreciate it if you could help as my brain is about to explode
THanks
sometimes routers get crazy if they are not turned off for a bit once in awhile
another option is to update the firmware of your router to the latests thats fixed
issues for many people
router
Hi Rudegar
Ive tried resetting the router and ive updated the firmware... no luck
Ive also tried installing wefi on my htc to connect to the router to see if that might work, but it does the same just keeps on trying it reaches 'verifying netgear' then it just restarts the connection.
Currently theres no restrictions on any mac addresses etc... so i dont see the reason why it isnt connecting
ANY help would be appreciated thanks
I have had my Tab for 2 weeks now.
At home I had no problem to connect to my WiFi network for 1 week: then suddenly the Tab would not connect and would remain stuck on “getting IP address…”.
I changed from WPA to WEP to WPA2 PSK with no luck
But if I go to a static IP, then I have no problem to connect.
On my office “public” WiFi network, exactly the same problem: it worked for a week and then bingo stuck on “getting IP address…”. Again going to static IP solved the connection problem.
My question is: how do you delete a network from the list? It seems to me that the Tab keeps an IP address in memory and if ever that address is taken by another device, it gets stuck!
Any advice would be appreciated.
I had this exact same issue on the same day I bought my Sprint Galaxy Tab (11/14). I did a hard reset that afternoon, and I haven't experienced the issue since. I'd already had all of my apps downloaded, and settings tweaked, so hard resetting was kind of annoying. I hope this doesn't come up again.
Yep sounds familiar, my Thomson Speedtouch 780i runs on a old firmware which gives me same issue with the Tab, had to run with no security. If you decide to run with no security turn off broadcasting..or update firmware/router..
My router is quite recent and has the latest firmware.
All my toys (iPad, Dell Streak, HD2 together with 3 PCs) connect without any problem.
The Tab had no problem either for a week.
Then for unknown reason no way to connect unless using a static IP.
And as I have not found a way to delete the network in memory (short of doing a hard reset)I am stuck.
And now same problem arises with office netxork:-(
Yeah just do a factory reset in privacy settings i think
susu42 said:
My router is quite recent and has the latest firmware.
All my toys (iPad, Dell Streak, HD2 together with 3 PCs) connect without any problem.
The Tab had no problem either for a week.
Then for unknown reason no way to connect unless using a static IP.
And as I have not found a way to delete the network in memory (short of doing a hard reset)I am stuck.
And now same problem arises with office netxork:-(
Click to expand...
Click to collapse
My Tab is doing the same thing now. I can't do a hard reset....is there another solution?
Ugh, I have the same issue! Had it for 2 days and all of the sudden it's stuck on Getting IP address from... Resetting to factory defaults was depressing. I wish there was another way!
It also happened to me when I was on vacation at my relatives home. The tab would work for a day or two and then be stuck at that message. I had no issues with doing a factory reset as it was still new. But then I started using the static IP trick and that worked. Now I'm back at home and I don't have this issue at all. Been using it for a week with my wifi and all is well.
Nothing was actually working: restarting the router, forgetting the network, creating the network manually, changing the authentication method, etc.
I'm sure its was an issue with the router at my relatives home, but still why was my Nexus one and Laptop connecting with no problem???
For those who are having the problem, use a static IP for the time being, you don't have to reset.
-Gus
I ended up switching to Channel 1 on the router at home, and haven't had any problems since. Chose Channel 1 after running WiFi Analyzer.
having this same problem. I've messed with WEP vis WPA and tried static IP. Using a verizon fios router. any help?
Bah, it happened again! Now I really dont want to reset
Same issue here ...
I can get WIFI at Starbucks but not at home ( Open-WRT on linksys )
I wonder if it depends on SIM card being inserted?
Mine is a Verizon FioS router as well, at work. Can get on fine at home or anywhere else. My iPad had a problem here forgetting the network but I could at least reconnect. This is doing exactly like you guys.
I wouldn't even care that much except when I'm inside the office I can only pull in Edge data. Ugh.
I had to change wireless settings on my Linksys - most changes were to disable some fanny things like "afterburner" - and setup wap2 for security to have a stable wifi.
I've had the same problem with my TMobile Galaxy Tab. All I do is to turn off Wifi in the Settings app, then turn it on again. I am usually able to snarf an IP address straight away after that.
It also helps to just turn the device on and then off again. it boots so fast that it isn't too annoying.
I had similar problem at home. My DHCP server had wrong time set. After setting the time on DHCP server correctly everything is back to normal.
i hav a tab on tmobile love it not sure if i had the same issuse as u guys tho the issuse i had was it would work without any problems im talkin about wifi then the next day the wifi doesnt want to lock onto the wifi it would search then drop to start serchin again , now wat i learned is sum apps require wifi to work because high data at the same time it changes sumthing in ur wifi settings after using the app the first time which would require u to master reset the device to resolve the issue the program that was doin it for me was frostwire
same here
my version of the same problem appeared when i changed the static IP of my home router (AVM Fritz!Box 7170). before that i always got a dynamic IP through DHCP on my galaxy tab.
After changing the router IP i only could connect with a static IP.
if i use a different WIFI network instead, DHCP is working as expected.
in my opinion the problem is with the firmware storing the network settings and with no possibility of deleting it completely. a hard reset cannot be the solution...
does anybody of you know if this problem occurs on other froyo-based devices also? is there a way of deleting network settings in a working way?
Had the same problem, EU TAB white Stock 2.2 rooted spot connecting to my main Wifi but connects to 3 or 4 other dhcp APs.
Have a htc Desire whit stock 2.2 + rooted and never had that problem.
In the end i hardreset Tab and no problems 1week and counting.
EDIT
FUuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
Happen again... im not going to hardreset again, im looking for a more permanent solution
Had the same problem. I have the Verizon FIOS router. The solution is actually easy. Just drain the battery of the Tab. Charge it to full and turn the Tab on. I think the Tab really "forgets" the old network after this kind of restart. No need to reset your Tab to the factory settings.