[Q] USB storage does not work - Galaxy S I9000 Q&A, Help & Troubleshooting

I cannot mount internal SD card as USB storage device.
When USB debugging is inactive I get "MTP Application connected" screen and at the same time Windows tries to install MTP USB device drivers with no success.
When USB debugging is on I get "USB connected" notification, Windows sees SAMSUNG_Android device and when I press Connect USB storage button on the phone Windows fails to install the drivers for the SAMSUNG_Android.
This happens on PC where I used to mount my phone before. The failure started after I installed Clockwork recovery and backed up the phone to SD.
I did not installed custom ROMS, only root and recovery.
PDA: I9000JHJP4
Baseband : I9000JHJP3
CSC: I9000PTRJP4
Kernel [email protected][email protected]#1
Thanks.

Related

USB mounting problem

I connect my phone via usb after rooting. It just says USB connected. I cant choose to mount sd card. Anyone experiencing the same problem ?
You have to go to Settings -> About phone -> USB Settings and choose "Mass storage". Sometimes when I reboot my phone I have to select that option to get mount working again. Probably a bug.
Mine is already in mass storage mode.
Solved the problem by checking USB Debugging mode and downloading Samsung USB drivers for mobile phone.

[Q] USB Speed

Each time I connect my Galaxy S (I9000) on my computer it shows the message that my device can perform faster...as if my Galaxy is running with USB 1.0.
I've used two different cables, different USB ports...and nothing happens.
Using the same USB cable, with another device, it do not shows the same message so I'm thinking it might be a problem with my Galaxy S or with the USB drivers that I’m using.
Also I tried with another computer (Linux/Ubuntu) and the speed it is as should be, a 600 Mb video takes about 2 min to transfer.
I've been using KIES but has the same problem...tried to install the driver aside KIES and the same result...I did a little research and it seems that I’m the only one with this problem...
My computer (Windows 7) does recognize the phone I can use Mass storage, kies, but the transfer rates of files are between 500 KB/s 300 KB/s...600 Mb video takes 15 min!!!...I have reinstalled over and over the USB driver and the same result.
I will appreciate any help
PDA: I9000XXJPY
PHONE: I9000XXJPY
CSC: 19000OXAJPX
using Darkys 8.0 Rom.
Its because you are connecting with Kies. If you connect as a mass storage device it runs quicker.
Even connecting my device as a mass storage (Selecting from Settings/Wireless and Network/USB Setting and selected Mass storage...my computer reconigze it as a USB 1.0
xavierbart said:
Even connecting my device as a mass storage (Selecting from Settings/Wireless and Network/USB Setting and selected Mass storage...my computer reconigze it as a USB 1.0
Click to expand...
Click to collapse
What is the USB version of your computer?
The USB version of my computer it is 2.0...when I connect a different device (USB, External HDD, Webcam) I dont have any problem...

Cannot connect to Mass Storage Mode

Everything was normal till yesterday ,i mean when i connected my phone to pc by usb cable it used to ask if i want to charge or connect in mass storage mode
But today when i connected my phone it didn't gave any notification and just kept charging
i have tried changing the usb ports
tried re-installing the drivers
checking and unchecking usb debugging mode but still it doesn't work
any help will be appreciated :good:
First thing to do would be so to Settings > SD card and phone storage settings and try having mass storage only selected.
If you have rooted ur phone u can try mounting USB storage from the advanced menu of CWM in order to see whether it is a hardware based issue or an issue isolated to the ROM.
If you have the android sdk installed, check whether ur PC acknowledges that the phone is connected to the USB port by typing "adb devices" in cmd. This will tell you whether the PC actually knows that there is something plugged in.
Final thing to do would be backup in CWM and reflash stock ROM then revert to backup.

USB mass storage not working after rooting+CWM (clock work mod) on Galaxy Note N7000

Hi Friends,
In order to root and install CWM, I flashed PhilZ-cwm6-XXLT4-OXA-4.93.6-signed . The installation was successful and the device got rooted. But now I am not able to connect my phone to desktop or laptop in USB mass storage mode. When I do the same, only charging starts but not the USB connection. Just before performing the flashing, USB mass storage was working perfectly fine.
In brief, I followed below steps
1) start the phone in recovery mode
2) select install zip from sdcard
3) select the clock work mod zip file and start flashing process
4) Go back to main menu and reboot the device
I repeated the above process one more time but still no luck. I am new to rooting and still in learning phase. Galaxy Note is running on Jelly Bean 4.1.2 XXLT4. Please help me out with this issue.
Thanks in Advance,
Nikhil Bhalwankar
Try to boot into recovery and choose mounts and storage. Then mount usb and connect to pc. Check if the drives are mounted.
nokiamodeln91 said:
Try to boot into recovery and choose mounts and storage. Then mount usb and connect to pc. Check if the drives are mounted.
Click to expand...
Click to collapse
I already tried doing the same on my windows 7 desktop as well as ubuntu laptop. Still no luck.
nokiamodeln91 said:
Try to boot into recovery and choose mounts and storage. Then mount usb and connect to pc. Check if the drives are mounted.
Click to expand...
Click to collapse
Problem is now resolved. I had to fully remove kies and USB driver. Then install latest version of kies which installs unified USB driver. This resolved the issue.
i have rooted my micromax e313, now
1. while going to recovery mode it stucks in a loop
2. i cant connect my phone via usb
3. sim cards are not detected.
please help to fix this

Cannot connect USB to PC or OTG

I have a n920p and recently ended up in bootloop after trying to install Xposed framework. I do not have a rom back up saved on my internal storage. I can only go to TWRP and Download mode.
When I plug into my PC it reads the "USB device not recognized". I have the Samsung drivers installed.
I also purchased a USB OTG drive and attempted to use it in TWRP, but when I try to select the USB it reads "0 MB".
In summary, I have no working rom/OS, I cannot connect to my PC with the USB, and I haven't been able to access the USB OTG.
I am at a loss. I apologize in advance if this is elsewhere. I have searched xda and google and cannot find direction.

Categories

Resources