[Q] Proxy Server [Wifi] - Motorola Droid and Milestone General

as mentioned earlier, i am very new to Android.
WIFI at College of mine uses a manual proxy server ip entry and a port to access internet through it.. and i cant find a place to insert Proxy server ip and port address in my Milestone.. can any one help me out through it??

Related

How can i connect Windows Live for Windows Mobile throug a proxy server?

Hi all,
The proxy server is used in wireless system at my work. I enabled proxy server configuration in communication manager and i can connect web sites with internet explorer.
My question is, while i am unable to connect windows live messenger, there're also no proxy configuration on it. Are tehere any way to use messenger through proxy server ?
Or, i guess Windows Live for Windows Mobile is brand application came with WM6.0. Do you know may i use old messenger versions via proxy? Or do you know any other msn client with proxy support ?
Thanks in advance for your help.
you can setup the proxy in live messenger
I couldnt find any place to enter a proxy address in messenger. Could you please tell me where can i enter the proxy?
hey, I connect through a proxy for all my internet (using tmobile usa), and I was never able to figure out how to use windows live via proxy. however to download my hotmail emails I finally found a work around. you have to upgrade ur hotmail account to hotmail plus (20 dollars/year). now u have access to pop settings and set up a new email account using those settings (not through windows live) good luck
omar
I do not care mails, i even dont use hotmail for mailing.
i need to instant messaging to keep talking with my girlfriend.
You can't use a proxy server to access WLM Service from your Pocket PC. It simply doesn't support this.
The way that the client communicates with the Messenger service greatly differs when using a proxy, and support for this is not available in the mobile client. You NEED to create a direct connection, which thus prevents you from connecting in networks where using a proxy server (HTTP or SOCKS) is mandatory.
My mobile connected to Wifi but I couldnot surf WEB cause I didn't know how to setting up
my working Proxy via port 8080.
Help me!
Same problem here, but a little diferent.
I connect to the proxy server in my office network trough wireless access point, and then it asks me for the user credentials. I put in the credentials (i have an unrestricted account, i'm one of the administrators) but then it keeps asking me for them as if i had used wrong credentials! Are there any configuration on the proxy server to accept WM6.1 connections?
Thank's!

Public IP Address??

I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Try this
I'm no pro, but had to tell the Physical address to the the tech guy at my university so he could enable my phone o use the wireless network...
... anyways, download and install a Registry Editor (I use Task Manager v2.8) you should be able to access an Ipconfig tab, where all the information is available.
I don't know if I'm in the right track.... Hope this helps? =)
jim
your pda have an ip address
using wifi router the uplink sees the routers ip
using an isp the internet sees the isp's assigned ip
http://www.ip-adress.com/
http://en.wikipedia.org/wiki/IP_address
Here is a kewl utility that is FREE.
http://www.cam.com/vxutil_pers.html
Here is the stuff it does.
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
Another good one I use is Iper Suite.
http://tonaya.com/products/iper/index.php
For casual use the first one is probably satisfactory.
IPer is worth buying for the increased functionality and has a TFTP client.
HTH
TSoma said:
I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Click to expand...
Click to collapse
200.* would be a public IP. As would 32.*
Turn off your proxy setting in the phone and do the www.whatismyip.com thing. That will get you a more meaningfull result than anything else.
When I'm on GPRS/Edge (AT&T proxy settings in force) network I get a 66.102.186.15 IP address as reported by whatismyip.com. That resolves to alpmagr1fe06-dmz.mycingular.net. Which should be a att proxy server even tho it implies by its name its on a DMZ.
When I turn off the proxy for GPRS/Edge I get 166.195.188.15 according to whatismyip.com. That IP address will not respond to ICMP commands. So I assume it is firewalled. So it seems to me that yes you CAN and DO get a public IP address, its just that address is heavily firewalled.
You've piqued my interest, tho I cannot do anymore testing at this moment.

WI-FI & Proxy

Is there any way to set a proxy address to Wi-Fi connection?
Or is there a way to add proxy ro IE/Opera/Youtube?
My School WiFi required a proxy to access the net.
Help will be appreciated.
Start Menu->Settings->Connections->Connections
Under "My Work Network", clic on "Set up my proxy server" and then... setup your proxy ^_^.
i thought that is for the gprs?
darkangel912 said:
i thought that is for the gprs?
Click to expand...
Click to collapse
Yes this is also what I had thought. I have to set up a proxy in addition to the SecureW2 software client that I have to configure in order to connect to my University's Wi-Fi. I can set up SecureW2 fine, it will connect to the network, but I'm unable to set up the proxy properly.
Already tried the method still can't access internet.
Called HTC Tec support just now, they say you can only add proxy for gprs but not WiFi.
Any mod to add proxy to WiFi?
bump.......
This is very important, can anyone help?
Wifi Profiles Tool
Just try WifiProfiles from RStein - very convenient

Help setup proxy server setting in Android

Is there a setting for a proxy server in Android? I need to use a proxy because the internet at work is behind a proxy server.

[Off-Topic] How do I setup a connection to my home web server?

(Don't blame me for being long-winded, I'm just explaning the situation (why I want to do all these) and also to prevent people from asking questions such as "Why do you even want to host your website at home?")
I want to pay for web hosting, but, as a student, I can't. I also want to host all my Android Development on my site, apart from XDA and Samdroid. But, I can't use a credit card (obviously, my country dosen't allow ownage of CCs before 21), and free web hosts (sorry for shouting) S*CK. Slow loading, banning because of CPU-hogging/ too many cron jobs, etc, etc... Also, my parents are paranoid about their credit card details being sold online at exorbitant prices. I do understand that web hosting is expensive, and it is not really wise to allow free web hosting, and I do not want to blame them for banning me, hence I decided to host my website from home. *catches breath* I do have some prior knowledge of fixing stuff, and whipping old parts into one lean mean computing machine. I've set up the computer, and configured my router. I can view the web site (It's good'ol wordpress) when I typed my local IP into the web browser from another computer in the home network. But, when I tried to access using the public IP from my school, I cannot enter the site. I have previously configured port-forwarding. I used No-IP's dynamic DNS client in this case. When I checked my public IP using different websites, all gave me different information. One gave me an IP with 255.244.***.***, another gave me 157.209.***.***, and others gave me 255.250.***.***
1) How do I make sure that when someone types in a URL or IP, it will show me what I want them to show?
2) Why are different websites give me different public IPs? No, I don't have a firewall, or a proxy.
We need more information:
1. Who is your internet provider
2. How do you connect? ADSL/SDSL/T1/Dial up?
3. If its ADSL/SDSL then you'll have a router (unless they've given you a USB modem for it). We'll need to know what type.
4. What's your concection speed, both down and more importantly up.
Now, assuming your ISP doesn't give you web space that you could use, then you'll need the following:
You'll need a dynamic dns service, some are free.
You'll need a router which can forward http (TCP port 80) traffic from the internet to your web server.
Once the router is forwarding http traffic to the web server, people on the internet will be able to access your website.
If you want to access it using the same address then you'll have to update your hosts file on your computer.
For windows this is in C:\windows\system32\drivers\etc\hosts
Add an entry like:
dynamic dns web address IP address of webserver
So if you've set up arikyeo.dyndns.org and your webserver's internal IP address is 192.168.0.200 then you'd add the following to the hosts file:
arikyeo.dyndns.org 192.168.0.200
xaccers said:
We need more information:
1. Who is your internet provider
2. How do you connect? ADSL/SDSL/T1/Dial up?
3. If its ADSL/SDSL then you'll have a router (unless they've given you a USB modem for it). We'll need to know what type.
4. What's your concection speed, both down and more importantly up.
Now, assuming your ISP doesn't give you web space that you could use, then you'll need the following:
You'll need a dynamic dns service, some are free.
You'll need a router which can forward http (TCP port 80) traffic from the internet to your web server.
Once the router is forwarding http traffic to the web server, people on the internet will be able to access your website.
If you want to access it using the same address then you'll have to update your hosts file on your computer.
For windows this is in C:\windows\system32\drivers\etc\hosts
Add an entry like:
dynamic dns web address IP address of webserver
So if you've set up arikyeo.dyndns.org and your webserver's internal IP address is 192.168.0.200 then you'd add the following to the hosts file:
arikyeo.dyndns.org 192.168.0.200
Click to expand...
Click to collapse
I used No-IP dynamic DNS service, with their client. But, it didn't work. I am using Singtel as my ISP, with a Linksys B/G router. I have forwarded the port 80 to the IP, and set port 80 as an exception. I can view the site locally, but not from the outside world.
Setup your no ip on their site as a port 80 forward. Forward this to the local port on your computer that you are using for the server. Log into your router and port forward the same port that you put in for the no ip into the from and to ports section and be sure its forwarding to your lan ip. After this is done then try it.
Sent from my DROID2 using XDA App
I see that you have already been told how best to start your server. I can also recommend instructions for collecting server statistics https://www.host-tracker.com/Blog/server_m/ This will come in handy for you in the future. Here you can configure notifications for server failures.

Categories

Resources