Hi, I've read FAQ and used search but I'm still confused. I have Bell HTC Touch on famous $10 unlimited data option, running NFSFAN's WinMobile 6.5 ROM.
What is the best Android ROM for me to use? Will it work with Bell correctly?
What is the exact detailed step-by-step process of upgrading from NFSFAN's ROM to Android? I'm confused about kernel and rom etc.
Will I have any problems with Bell's data plan - does it matter for them if I change OS? NFSFAN's rom works fine. Will I have laptop tethering (internet connection sharing in NFSFAN's rom)?
What features currently don't work, will I lose anything? (blutooth, gps etc.?)
Does Android works faster than WinMobile 6.5 on Touch? Is it fast enough and stable? Is it worth upgrading at all?
All advice appreciated. Thanks.
I have been running Cyogenmod's ROM for a while now and it works great on our phones.
As far as I know, everything does function correctly (Data, Bluetooth)
If you are doing this for the first time then I would recommend that you run thoughtlesskyle's ROM (Not so free Super Froyo). That one is a lot more stable.
If you look at the sticky on the main page, there is a thread that will guide you step by step on how to get this running on the phone.
I have been using Android on this phone (I'm with Bell too) for over a year now and haven't had any issues at all with data usage and such.
Sure it may not be as quick as Windows Mobile OS but it is definitely worth it.
CyCLoBoT said:
I have been using Android on this phone (I'm with Bell too) for over a year now and haven't had any issues at all with data usage and such.
Sure it may not be as quick as Windows Mobile OS but it is definitely worth it.
Click to expand...
Click to collapse
Thanks. Is there a way to 100%-proof block the data connection (for example when going to US)? In WinMobile 6.5 I just changed "777" to "776" in data connection settings, and that worked perfectly. Is there a way to do this in Android?
romandesign said:
Thanks. Is there a way to 100%-proof block the data connection (for example when going to US)? In WinMobile 6.5 I just changed "777" to "776" in data connection settings, and that worked perfectly. Is there a way to do this in Android?
Click to expand...
Click to collapse
using Atools edit your .nbh so that ppp no start is turned on
thoughtlesskyle said:
using Atools edit your .nbh so that ppp no start is turned on
Click to expand...
Click to collapse
It's not quite what I meant, I have data in Canada, just want to be able to temporarily disable it when I'm in the US for example, to avoid exorbitant charges.
Also, the link to NBH files at it029000.massey.ac.nz/vogue/files/?C=M;O=D is dead and I can't find any mirrors... Does anyone know the mirror or can post file with the two common kernel types referred in the guide?
romandesign
I have no data plan on my touch but I would assume that in the wireless networks settings box killing data should work
It's easy to shut off the data in the menus. I do it at work sometimes because the poor signals drain the battery otherwise as it keeps trying to connect.
goducks3620 said:
It's easy to shut off the data in the menus. I do it at work sometimes because the poor signals drain the battery otherwise as it keeps trying to connect.
Click to expand...
Click to collapse
Thanks. Now the only thing I'm missing is a working link to the NBH file - the one in the guide does not load and I can't find any mirrors... BTW which kernel should I use for "not so free super froyo" recommended to me?
OK, it worked. Thanks fo everyone for your advice! I only have calibration problem (it's off after every reboot) and can't make ADB file manager to see the phone...
screen calibration tools in the menu has a save option choose that and it will save after every reboot
have fun
Can't help with adb if your on Windows I'm a Mac it just auto recognizes and shows the sdcard
Thanks! Calibration problem solved. The only thing it seems to eat the battery like crazy, I don't kno why... Full charge - and after no talking, just some fiddling with android and mostly just lying around, and overnight the battery is almost gone... The exactly same phone that my wife has, on WM6.5, is 3/4 full... I remember in WM there was a data connection idle time trick, but here I don't see any options about that...
OK, I've solved the battery problem - I'm going to write a separate post about this.
romandesign said:
It's not quite what I meant, I have data in Canada, just want to be able to temporarily disable it when I'm in the US for example, to avoid exorbitant charges.
Also, the link to NBH files at it029000.massey.ac.nz/vogue/files/?C=M;O=D is dead and I can't find any mirrors... Does anyone know the mirror or can post file with the two common kernel types referred in the guide?
Click to expand...
Click to collapse
I am on bell too, just make sure in setting data off during roaming, works fine for me when i went to the states.
Another newbie question: I am also on Bell. After flashing Android, do I need to install Carrier file for data plan? If so, can anybody give Bell link?
Download the nbh from sourceforge git (via atools)
Related
Got myself an ATT Touch Pro. When using the Internet Sharing Application, with either USB or Bluetooth, I am getting an error. This is what is going on.
1. Open the Application.
2. Select either USB or Bluetooth.
3. Click on Connect.
4. Click Yes on the Enable the Device Dialogue.
5. Status shows as Device Setup finished.
6. Network activitiy shows in the Top tool bar.
7. Error message: Cannot Connect. The Remote party has ended this connection.
I can put the same SIM back in my Tilt and I am running great. Also downloaded URPREY-ICS from a different thread and installed it. But still having the isssue. Any help is appreciated.
It's AT&T's way of trying to force you to get a tethering plan. You need a registry editor, and maybe your phone unlocked, but mine worked without it.
Go to the key [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
There will be a value ForceCellConnection it will be set to "AT&T ISP". Change it to "Media NET" without the "" and that should do it. You'll need to close and reopen internet sharing if you had it open while doing this.
Thanks so much! It worked!!!!
Internet Sharing on FUZE
All you really have to do is go into settings and select the ATT ISP... edit... instead of [email protected] change to WAP. This will connect the forced ATT ISP Setting to connect to wap.cingular... No need for a download or anything... I had mine working in a few seconds.
I am assuming it is against AT&T's TOS to tether without the plan, correct?
My question is... I pay for the unlimited data package... If I tethered for small amounts of data while traveling is it really noticeable? Is there any other way for them to tell?
xbi0s said:
I am assuming it is against AT&T's TOS to tether without the plan, correct?
My question is... I pay for the unlimited data package... If I tethered for small amounts of data while traveling is it really noticeable? Is there any other way for them to tell?
Click to expand...
Click to collapse
they can't notice if the traffic is coming from a laptop or a phone but they can notice irregularities in the data consumption. Basically, if you use it for normal usage (web browsing, email, etc..) then you should be fine.
xbi0s said:
I am assuming it is against AT&T's TOS to tether without the plan, correct?
My question is... I pay for the unlimited data package... If I tethered for small amounts of data while traveling is it really noticeable? Is there any other way for them to tell?
Click to expand...
Click to collapse
I've had unlimited data for over two years. I stream TV via orb from my home pc to my phone and laptop, browse the internet going to whatever site I please, etc. I've went over 5GB a few times, but normally stay in the 2-3 GB a month range. I've never heard anything. And not they can't tell. If it's against their TOS, they need to tell their reps in the store. When I got my blackjack two years ago, that's exactly what they told me to do. They said you don't need a plan other than unlimited to tether with this phone.
mr_skot_a said:
All you really have to do is go into settings and select the ATT ISP... edit... instead of [email protected] change to WAP. This will connect the forced ATT ISP Setting to connect to wap.cingular... No need for a download or anything... I had mine working in a few seconds.
Click to expand...
Click to collapse
So did I. Because I already had a registry editor downloaded on my mem card and it worked fine on my new phone. A registry editor is a requirement IMHO, so it's well worth the download even if you don't use it for this.
silenthatred said:
It's AT&T's way of trying to force you to get a tethering plan. You need a registry editor, and maybe your phone unlocked, but mine worked without it.
Go to the key [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
There will be a value ForceCellConnection it will be set to "AT&T ISP". Change it to "Media NET" without the "" and that should do it. You'll need to close and reopen internet sharing if you had it open while doing this.
Click to expand...
Click to collapse
Actually you are better off to just empty out the value.
This way, when you go to internet sharing you will get a second drop down asking you to select the connection.
I did this and it works greate. ( This is how the unlocked version of HTC Touch Pro has )
htc touch pro p4600
i have been trying to connect my phone to laptop so far i have been unable to do so. i have a try to change the isp to media net but i wont let me how can i fix this problem
spider4569 said:
i have been trying to connect my phone to laptop so far i have been unable to do so. i have a try to change the isp to media net but i wont let me how can i fix this problem
Click to expand...
Click to collapse
Have you tried any of the steps above? Your post is pretty vague.
Will they kill your contract if your caught using too much data?
rpricket said:
Will they kill your contract if your caught using too much data?
Click to expand...
Click to collapse
I hit around 5.8GB back in March. Didn't hear anything, so I assume no news is good news. They CAN do it however. Doubt full that they will unless you make it a habit. That was only my second or third time over 5GB in over 2 years and the most I have ever used in a month. Yay march madness!
Took latest HTC ROM and sharing will no longer work
I updated my Rom on both my Fuze and Tilt. Now internet sharing will not work any more. I get the remote refusal message. I went into the reg and I do not have the forceconnect value to delete. Any suggestions??
Schuedog said:
I updated my Rom on both my Fuze and Tilt. Now internet sharing will not work any more. I get the remote refusal message. I went into the reg and I do not have the forceconnect value to delete. Any suggestions??
Click to expand...
Click to collapse
Try a custom ROM? I don't have that ROM to tell you what to change, but I would guess it is the connection internet sharing is using. Use media net and see if that helps. If not, custom rom! There's no good reason really to run a stock ROM unless you intend on using your phone the way AT&T wants you to.
I know how to edit the registry on a PC, how do you do get to it on a Tilt 2?
txdtr said:
I know how to edit the registry on a PC, how do you do get to it on a Tilt 2?
Click to expand...
Click to collapse
Same way...with a registry editor.
Sorry, I didn't make myself clear. Does the Tilt2 already have a register editor, or do I need to download one? If it has one, how do I get to it? If I need to download one, what would you recommend?
Thanks,
txdtr said:
Sorry, I didn't make myself clear. Does the Tilt2 already have a register editor, or do I need to download one? If it has one, how do I get to it? If I need to download one, what would you recommend?
Thanks,
Click to expand...
Click to collapse
You need to download one. I'm using whatever came with my ROM, so I'm not sure of the name, but they are available here. Just search for them.
Thanks, I'll find one.
Hey guys I am sorry if this has been covered before but I can't find it. I have an unlocked euro diamond but I'm using rogers as my service provider. I have wifi at home but when im away from home I don't want the diamond to connect to rogers data connection at all but from time to time it says its on. How do I make it so that I can use the data connection when I want to manually but at the same time automatically not connect to data from rogers?
Do a search for 'no data' it will allow you to control your data connections
do a search on this forum? Nothing really comes up with what I need.
I have a euro diamond on Rogers now aswell
I find this way works to disable data connection
All Setter --> Connections ---> Connections
once you in there see if you have anything rogers related, if yes just delete that set up (you prob let the phone set it up for you when you first start up your phone in Toronto)
as long as you don't set up a connection in that tab. It will never connect to any E and G
is this something I have to plug into like active sync to see or is it in the phone. I cant find anything called allsetter, thanks so much for helping though
teggboi said:
is this something I have to plug into like active sync to see or is it in the phone. I cant find anything called allsetter, thanks so much for helping though
Click to expand...
Click to collapse
it's on the phone.. slider the botton menu to Settings
THen in there bottom left there is a tab that says All Settings. Hit that then once you there.. you will see Personal, System, Connections on the bottom. Tap the Connection Tap, once you there.. you should see an icon that says Connections. Hit that also.
After that it will show all your current set up data transfer network. If you see one there. Delete it then it should be ok.
If you got more problems just continue posting here, I need to head out for a bball game will come back afterwards to help if you still need
Oh actually I see it and i deleted the rogers internet in manage settings its working nice thanks! But when im out of wifi range this means i cant update at all liek weather or anything. So what I just did disabled the E and G connection but my phone radio connection to rogers still works and everything related to data will work with wifi? Thank you so much big bro!
teggboi said:
Oh actually I see it and i deleted the rogers internet in manage settings its working nice thanks! But when im out of wifi range this means i cant update at all liek weather or anything. So what I just did disabled the E and G connection but my phone radio connection to rogers still works and everything related to data will work with wifi? Thank you so much big bro!
Click to expand...
Click to collapse
yes correct. now you can only update if you are in a WiFi region. If you are not then you just can't update data but your phone will still work cause that is another separate setting.
Next time if you don't want data connection, remember NOT to allow the phone auto setup internet connection setting (usually after it finishes configuring the phone setting).
Glad i can help!
The thing is that yes you are right, but when my phone comes out of stand by theres a G and then it goes into wifi after 2 seconds. Do you know why? Is it using data?
displaying G or E or H is just letting you know what kind of signal the phone can pick up.. as long as the reception bars icon does not have a G or E or H or 3G beside and has an antenna sort of thing beside the bars then you are ok.
I'm assuming it turns to WiFi right away because you have WiFi on right? Turn WiFi off and tell me if the same thing happens
yes and it makes sense thanks haha im just so new to this smartphone stuff. I want to make it run faster and better with rom updates and stuff but theres so much content i don't know where to begin. I want to do it myself but I don't want to mes it up. I just gotta learn from all of you. Thanks a lot bigbro!
teggboi said:
yes and it makes sense thanks haha im just so new to this smartphone stuff. I want to make it run faster and better with rom updates and stuff but theres so much content i don't know where to begin. I want to do it myself but I don't want to mes it up. I just gotta learn from all of you. Thanks a lot bigbro!
Click to expand...
Click to collapse
no problem! I'm glad I can help! This is my first smartphone too had to learn a lot of stuff but this forum has been great in proving info on the phone
oh there is just one more problem. After I click on all people under people, it will open all my contacts/people and their numbers but after i change a view option, i can't go into all people anymore from touch flo, any ideas?
teggboi said:
oh there is just one more problem. After I click on all people under people, it will open all my contacts/people and their numbers but after i change a view option, i can't go into all people anymore from touch flo, any ideas?
Click to expand...
Click to collapse
what do you mean by changing view option?
i was just toggling with the view options under menu when your in contacts. It wont let me back in all people or contacts unless I restart phone. All these people were moved over from rogers sim.
not sure about this. But I'm assuming it's a ROM issue.
Are you still using stock ROM? cause when i got this phone the stock ROM was VERY slow and buggy.
yes I am lol i would like to change it but im so newb. When you have time could you help me through it?
Im going to sleep and look at the tutorial/guides tmrw and ill msg u if i need help =p. GN thanks a million
teggboi said:
yes I am lol i would like to change it but im so newb. When you have time could you help me through it?
Click to expand...
Click to collapse
well all the ROM thread under the ROM Development section has all the instruction to how to flash a new ROM. Just REMEMBER to flash a HARD-SPL before you do any ROM updates or else it will brick your phone (dead phone)
My suggestion for ROM would be the dutty one. Been using it for the last 2 months and his ROM are clearly one of the best available out there.
The link for newest dutty ROM: http://forum.xda-developers.com/showthread.php?t=411707
I'm using his V3.6 FINAL (you can find it on dutty's website) not the V4 on his thread, but the instruction of flashing a new ROM is exactly the same, it has step by step instructions there for you to follow or you can go here for the instructions: http://lievenvw.wordpress.com/2008/09/18/howto-flash-your-htc-diamond-or-htc-touch-pro-with-a-custom-rom/
Hope this helps
This is probably what you need: MoDaCo NoData
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
Hi, new poster here. I've only just started to tinker with my vogue after 2 years of suffering through WM6.1, unaware of all the outside possibilities. It's quite impressive really and i'm having a grand time with my new toy.
BUT.
I can't for the life of me understand why the data connection is not working.
I installed incubus' HTCSense release first, and it wouldn't connect (small little orange light next to the Ev symbol in notification bar:warning? error?), so I just wiped everything and installed the latest Donut. Now it says everything's fine, i can connect the modem and all, it even gives me an IP... but nothing that actually uses the data connection works; and I can't ping my IP from the outside, either.
I can't possibly be the only one with this problem, yet no thread on this forum seems to be addressing it. Does anybody know how I could track it down or work out a passable solution? I really don't have much use for Android if all it can do is be all kinds of pretty and switch between 5 screens silky-smoothly...
thanks in advance!
Vianney
PS: note that I'm on a Sprint plan, voice 200m + unlimited data, no text.
have you tried flashing back to stock windows, confirming data, then flashing to android again( either build).which voguimg.nbh file did you use?
Like hunter said, you need to flash back to the stock Sprint rom and provision data. You can download the stock rom for the vogue here or off of the Sprint downloads section. Nine times out of ten data problems seem to be because data wasn't provisioned prior to flashing Android.
this is also a good time to mention the forum search tool. since this question has been answered at least 100 times
Thanks for the suggestion! I don't suppose there's any way to save my settings/data while I flash everything back to winmo?
Provisioning might be the issue. But I had been using my Vogue on WinMo for 2 years and using data with no problem... that said, I changed my data plan from by-the-kb to unlimited since, so it might be that?
Hunter, I used incubus' included NBH for his Eclair, and voguimg-240x320-eclair-29-04-10.nbh for Vym's Warm Donut.
Kyle, I searched for a week before posting here so i'm familiar with this tool, but never could find the right answer; I'll happily educate myself if you provide me with the magic search terms.
vianneybon said:
Thanks for the suggestion! I don't suppose there's any way to save my settings/data while I flash everything back to winmo?
Click to expand...
Click to collapse
Do a reboot and when the text/code starts scrolling push the volume slide up to get the install menu. There should be an option to backup data. When that's done you can put it into bootloader and flash to winmo. Once you know you have data working on winmo, try browsing around a little, you can go back into bootloader and flash the nbh file you're using for Android. When it reboots go back into the install menu. Install the system and then restore data and you're all set.
Many thanks guys, I switched back (after a few hours and scares), provisioned, switched again, and now I'm just having too much fun awesome job.
hi again
Do you have to redo this everytime data stops working? It was doing just great and stopped all of a sudden 36h ago. Now the modem connects but doesn't even get an IP, no data icon appears in notification bar, and yet all the options (sync, background data...) are back to normal.
ifconfig -a gives me info for 'lo', 'dummy0' and 'usb0', all supposedly ok but with no packet (8 on 'lo') and no error to track down.
Is it likely in need of reprovisioning? Am I going to have to do it every 15 days?
thanks,
V
Your data shouldn't just stop working. Have you trie a reboot?
-------------------------------------
Sent via the XDA Tapatalk App
several times yeah.
It's just not even trying. The modem says 'done' but that's it, any app using data just says it couldn't establish a connection... i'm baffled.
Hi All,
I'm in the UK and have a US version P7310 wifi only (Samsung refurb bought off ebay)
Up until the ICS update 3 days ago it was in my opinion an awesome piece of kit
however, since the update, my wifi connection (or data transfer) is down at least 70% to what it was on HC 3.2
I am NOT losing the connection to the router, it is the data transfer that is down!
Many times I get the page is not available try later link might be down or if the page does load most of the data many images do not!
Repeated refreshes seem to have no affect! It was super fast before the update!
I have rebooted and still nothing, so I feel it is an issue in the tab rather than any other kit I have at the moment?
I have a wifi laptop and other android device and they perform as before on wifi so it's not the router!
I have also put the tab next to the router and it has made no difference!
I have searched the settings in the tab for anything obvious like load images or choke the bandwidth or whatever
and have turned many things on and off without success! I use the standard browser and the dolphin browser and both
act the same!
The tab has never been routed, it came with HC3.1 then I updated over the air to HC3.2 and then to ICS4.04
I know there is a folder for wifi in the settings and wondered if there was anything I could change to see if it improves anything?
Or has anyone else found their wifi is poor?
The 70% was accurate, not exaggeration, so much so that the tab is unusable for me like this!
I know it is early days for the ICS and the 8.9 world but would REALLY appreciate some advice for things to try please?
Kind regards
PS loved the noob video
Is it possible to go back to 3.2? I I restore factory settings it shall go to 3.1 and I assume 4.04? Would it go to 3.2 first?
Hmm...
Well, the support thread for the official ICS update has no mention of such issues.
Doing a factory reset will only reset the current ICS 4.0.4 to its default settings and will not revert the tablet to Honeycomb 3.1 or 3.2.
To downgrade, you should attempt through Kies, though I am not sure it offers the feature.
What I am certain of is that you can downgrade to 3.2 fairly easily by manually flashing a 3.2 firmware release.
You can download an official Honeycomb 3.2 United Kingdom release for the P7310 HERE
If you have no idea how to flash it through ODIN, please download this .zip archive that holds all the necessary tools. Then refer to THIS thread (where the archive came from) and read the short instructions on using ODIN in the How-to Section, last topic named "Using ODIN 1.85".
If you proceed to downgrade, consider to load the provided .pit file in ODIN 1.85's folder and checking "Repartition" in the program. Clicking Start with the .pit file loaded will wipe all data from your device, including everything that resides on the SD card.
After successfully downgrading to Honeycomb 3.2, you can attempt the ICS upgrade once again, but make sure to execute a factory reset from within Honeycomb's settings (or through recovery mode) on your device, before doing the update.
If the Wi-Fi issues continue within ICS, I am afraid I am short of knowledge to help track down the issue.
Good luck.
Solution?
Hi.
Maybe this will work for you: http://forum.xda-developers.com/showthread.php?t=1846766
strange
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Did you go to ICS using Odin, Kies or OTA?
Have you tried flashing the Stock ICS through Odin?
Have you tried doing a full data wipe? (reset to Stock)?
If you need to keep your app data, then save it with something like Titanium Backup (or make a Nandroid backup so you can return to current state, after experimenting)
What is your router? anything "exotic" about your WLAN settings?
fred_be9300 said:
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Click to expand...
Click to collapse
Not different symptoms. Equal symptoms. nakedninja42 was referring to the 5GHz band in his post,
[Guide] Enable Wifi 5GHz Stock ICS: I noticed that I could not connect to 5GHz after updating to stock ICS.
Click to expand...
Click to collapse
but did not say that he couldn't connect at all. And thus it makes sense to try it. Especially since Bananajet writes
that he doesn't lose connection - only speed (transfer).
Connection
Gentlemen,
thank you for your concise replies! To answer the points I think worth noting!
I downloaded OTA using the tabs own system (the 300mb file) it updated ok!
I did notice that I had to download 3 times as each previous one did fully download but didnt do anything!
On these downloads, I did not have the charger plugged in but had approximately 75+% of battery!
When I did do it the third time with charger plugged in, it updated as you would expect!
Strangely the tab has improved today and I would say 95% of clicks to a website or a refresh have performed as usual!
However (using dolphin browser) with one site open and a new tab for another, it would again not load all the images on the second page
but did NOT give me the page down link like the day before!
I would say it was a bad day for my wifi BUT the other bits of kit I use ALL performed as usual when the tab didnt
so I am still unsure of the problem? I did consider that the other bits of kit (nokia phone, Android Phone and a Laptop)
although NOT actively connecting to anything to download except being on whatsapp might be bullying the tab out
but I tried turning them off and it didnt change anything!
So I think I shall watch what happens and report back and see if anyone else mentions poor transfers?
By this I mean I REMAIN connected to the router and im NOT sure of the actual transfer rates BUT its like
the connection stops half way when the page loads (link down or photos half loaded) and no amount of refresh makes them reload
until such a time (usually 5 mins) that it does! This then does NOT start working normally (fast loading) but usually repeats itself
and doesnt load again! I do feel that any sites with mainly text and mininal graphics did load ok giving the impression
of a burst of power and then giving up hallf way if there was too much to load (my words, not one from a tech manual haha)
So just to say, the tab is working much better but not perfect! Shall report again when have more hours online!
Thank you again for your help
Kind regards
Bananajet
Update
Gentlemen (and any ladies)
after a few weeks using ICS 4 here are my findings! If anyone can help I would be very grateful as right now, the frustration doesnt compare!
I also realise my original title was slightly misleading, please note I NEVER lose connection to the router, it is the data that seems to
be choked! Almost like the tab only allows a bit through at a time and if there is a load to come through (images or streaming television), it chokes it and very little gets through? Interesting though I dont seem to have any issues wastching youtube much!
To recap, p7310 8.9 wifi version which was a refurb from the US direct from Samsung! Im in the UK! Originally came with HC3.1
I downloaded 3.2 straight away and have done nothing to this machine to alter what came out of the box!
I was very very happy with it and 3.2! Of course, as everyone else, was excited to get ICS 4.04
Downloaded ICS OTA with the update on the tab
I have noticed nothing for my type of usage much difference in ICS apart from possibly better battery but battery was ok anyway!
Back to my problem!
Web pages which contain any amount of thumbnails which might change (alter their positon on the page) when requested as a new page or refreshed very rarely load all of the images! It might load about 5-10% of them when the problem exists which is about 75% of the time! Also streaming live television is very poor to connect although when connected, it works perfectly!
On 3.2 even in my garden I could load web pages that were graphic intensive (nothing extreme, just were there might be mulitple thumbnails etc)
they would load as quick as you would want, reloads, new pages, browsing etc all worked perfectly and streaming television too!
I use the stock browser and one called dolphin
On ICS I would say about 75% of the time, any pages as mentioned above do not load all of the images, only probably about 10% of the images would load, the reast would have place marks showing where the other images should go! It would then stop! Any amount of recycle does not improve it until such time (can be a minute, can be 5 minutes)! The other 25% it works basically as it should, quite fast and normal!
One other issue is IF it is working correctly and I try and load a new tab or page in the background then the new page is highly unlikey to load correctly with any images it might want to display! Like "You cant have both mate" haha
On 3.2 any streaming video or television was perfect, fast and never failed! On ICS it has a 80% failure first time and requires usually 3-4 recyles to 'hook it'! Once it is in, it stays in and works well! If I try and change channel or view something else, it reverts to failure again!
I have changed no settings on router, changed nothing about anything! All other items in the house that might use wifi still perform as before!
The change in the quality happend immediately after ICS download.
This issue has left what was a fantastic bit of kit very frustrating to use and almost unusable!
I would really like to go back to 3.2 if I can but am unsure how easy this is although I do understand that was mentioned in an earlier post
I cannot try the 5ghz method as it is not rooted and to be honest, I am in the UK and that issue is regarding the US networks! My ccode says GB and not ALL btw.
To summarise, it seems that any new or data that requires a lot of refreshing rather than drawing from a cache doesnt want to load?
Any advice would be very helpful,
thank you all again.
Bananajet
Perhaps to do with the wifi channel used by router? Try to use channel 1 (or 6 or 11, avoid higher)
Try an app that gives WiFi diagnostics, like WiFi Analyzer.
Alternatively, reflash any other stock HC or ICS Rom through Odin... You might lose data (downloaded apps, settings, ...) along the way though (not sure, depends on exact approach, etc)
Have you try to test the speed connection wit your tab? I try whit speedtest.net in that site you can find the version for mobile, download it and try, just to see if it is a problem related whit your browser or with you wifi drivers
hope it could help
PS. you can find the app in play store too (same name)
Hi
I been having problems with using my "internet sharing" on my lumia 1020(keep telling me I need a data connection in order to use this feature....eventhough I do have). I asked around and one person asked if my lumia 1020 was from Rogers Canada which it was. Eventhough my phone is unlocked, this person is saying that the Rom on my phone is still Rogers and it is most likely the reason. He suggested getting rid of the rom, though I am not sure how to do this. I seen some posts here on how to flash but nothing for 1020, I am wondering if there is some guide for the 1020 as I really want step by step guide for my phone as I don't want to screw up.
Do you have the problem with both, wifi and mobile data connections? And did you try by connecting to a PC via USB (= using that connection)?
Also, why shouldn't it work with that particular ROM, did he explain that any further?
cäsar said:
Do you have the problem with both, wifi and mobile data connections? And did you try by connecting to a PC via USB (= using that connection)?
Also, why shouldn't it work with that particular ROM, did he explain that any further?
Click to expand...
Click to collapse
How I understand internet sharing works, is that it shuts off wifi and you can only use your data connection. It tries to shut it off and then I get this error ""there's no celluar data connection to share right now. check your cellular settings and signal, and try again"
Even though I can surf the internet before and after that message, so it is not my data connection. This guy thinks said he seen this happen on other phones and the he thinks the reason is that Rogers has like software locked that feature so that it only works with their Sims and that it is reject my Sim from another provider. He thinks that if I would reflash my computer with the Rogers rom then that check would not exist and it would work.
I am not sure what you mean by connecting to to a PC via USB. I can connect my phone to my computer and browse the file system of the phone, I just can't hotspot or really send MMS messages.
Oh, I thought you were talking about a different feature.
Yeah, you create a wifi hotspot from your data connection. What I said doesn't make sense then.
In general, you could also try a hard reset instead of fiddling with ROM, that's way safer. However, you will lose all your data on the device, so make sure you backup everything beforehand.
http://www.hard-reset.com/nokia-lumia-1020-hard-reset.html
I once had an issue with a settings page on my Lumia 800 back in WP7 days. Everything else failed, but a hard reset fixed it.
Is there any backup program to backup like your titles and stuff or will I have to setup all this up. I think my apps are backed up?
chobo2 said:
Hi
I been having problems with using my "internet sharing" on my lumia 1020(keep telling me I need a data connection in order to use this feature....eventhough I do have). I asked around and one person asked if my lumia 1020 was from Rogers Canada which it was. Eventhough my phone is unlocked, this person is saying that the Rom on my phone is still Rogers and it is most likely the reason. He suggested getting rid of the rom, though I am not sure how to do this. I seen some posts here on how to flash but nothing for 1020, I am wondering if there is some guide for the 1020 as I really want step by step guide for my phone as I don't want to screw up.
Click to expand...
Click to collapse
Hey I have that same phone you should not have to change the ROM
I got it working on mine but first
I want you to tell us a few things
Your current carrier
Have you installed the app "Access point" from Nokia?
Does calling work?
Does Data (internet explorer work)
wcomhelp said:
Hey I have that same phone you should not have to change the ROM
I got it working on mine but first
I want you to tell us a few things
Your current carrier
Have you installed the app "Access point" from Nokia?
Does calling work?
Does Data (internet explorer work)
Click to expand...
Click to collapse
Wind Mobile
I don't know what "Access Point" is. I am trying to use settings -> internet sharing - switching sharing from "off" to "on"
Yes calling works, texting works(besides mms texting which seems to work maybe 50% time)
Yes Data works, I can surf the net, use any data required. Only thing is "internet sharing" thinks it is off.
Search the internet for "Nokia access point app" you will get a link to the windows store to download the app. Download and install it. It fixes internet sharing.
wcomhelp said:
Search the internet for "Nokia access point app" you will get a link to the windows store to download the app. Download and install it. It fixes internet sharing.
Click to expand...
Click to collapse
Wooot, that seems to work!!!!
Now onto my next problem....why my MMS does not work with my Windows Phone and Wind Mobile.
Below is a link to a site that has the apn settings.
http://tinyurl.com/kud477t
wcomhelp said:
Below is a link to a site that has the apn settings.
http://tinyurl.com/kud477t
Click to expand...
Click to collapse
Yea.....I already googled it, as I stated in a previous post my MMS only sends 50% of the time. I tired most of the ones I found on the internet but still not working.
Works for me. Talk to wind and tell them you have an galaxy 3 or some other phone the sell, the them you need your phone reprovisioned (it just means the renew your cell network connection)