Hi, here a cab installer for adding good tweaks in TF3D Config. It's a compilation of all good tweaks from wonderfull guy here !
You will need this :
http://forum.xda-developers.com/showthread.php?t=405749
Here versions content :
celogeek_tweak_20080815.cab :
* Ultra Speed Tweak #1 : Set glyph cache 131072
* PowerSaving Tweak #1 : Activate powersaving on SIM
* PowerSaving Tweak #2 : Activate powersaving on MMC
* PowerSaving Tweak #3 : Activate powersaving on NAND
* Util Tweak #1 : Grow allowing task under sleeping mode (90s) when sector cable plug.
* Util Tweak #2 : Grow allowing task under sleeping mode (90s) when sector cable unplug (battery mode).
* Camera Tweak #1 : Activate Camera Burst
* Camera Tweak #2 : Activate Camera Sport
* Camera Tweak #3 : Activate Camera Video Sharing
* Volume Tweak #1 : Increase global sound volume
* Volume Tweak #2/3/4/5/6/7 : Increase Initial sound in any situation
* AutoLock #1 : Activate autolock
* AutoLock #2 : Set autolock to 30 s
Here my blog with tuto of installation (in french) : http://celogeek.free.fr/2008/08/celogeek-tf3d-custom-config/
It should now work anytime on any rom because I have add a autocreating key on cab installer
New version 20080813 available
Up for new version !
its working on all lang roms ?
I hope so
I have test it on this rom :
Diamond Project 3.2
Swift BL 5.6
beLite v0.97, v0.98
The last version should work better because I have set more global option on powersaving.
I hope TF3D continue to work after (they crash if they don't found a key)
Just try it, they only add option to tf3d custom config tools
If tf3d won't start after that, just remove it and tell me, I will try to investigate
well i installed .. looks like its working fine .. i will test it a bit
Greek original rom 1.93
Testing this now, thanks!
I have used your tutorial to flash my device a couple of days ago and all went smooth!
Works 100% @ swedish 1.93 stock rom Thanks! Great addon!
Thanks ! Hope can help !
300 french people come per day on my blog actually ! Awesome !
HI i have Swift BL 5.0 and TF3D Config 0.6.7 and i didn't see any new tweaks
i have installed first the TF3D config and then your cab, but no new tweaks, i have tried a soft reset to, but same issue.
am i doing anything wrong??
Ok, when you install TF3D they ask you where
say for example Main Memory
You have to do the same think for my cab, cause I use the same directory of installation
So .. After new tweak appear in gray
Here the pic of the result :
http://celogeek.free.fr/2008/08/celogeek-tf3d-custom-config/
Have fun !
geistteufel said:
Ok, when you install TF3D they ask you where
say for example Main Memory
You have to do the same think for my cab, cause I use the same directory of installation
So .. After new tweak appear in gray
Here the pic of the result :
http://celogeek.free.fr/2008/08/celogeek-tf3d-custom-config/
Have fun !
Click to expand...
Click to collapse
I have same problem, I can see new tweaks.
At the begin I install cab to internal memory and after TF3D Config start fails. Now I have install in main memory and TF3D Config start but not ant new tweaks in gray appear...
"I have same problem, I can see new tweaks." => same prob but you can see new tweaks ? you can or you can't ???
ok
If you install TF3D after my cab, it's normal that you don't see anythink, because it remove is directory and redo the install .. so lose my tweak
Ok,
uninstall my cab
uninstall TF3D
install again TF3D
install my cab
if TF3D crash is because some trick on my cab aren't available for your phone.
Could you please give me the ROM version and the phone you use ?
geistteufel said:
"I have same problem, I can see new tweaks." => same prob but you can see new tweaks ? you can or you can't ???
ok
If you install TF3D after my cab, it's normal that you don't see anythink, because it remove is directory and redo the install .. so lose my tweak
Ok,
uninstall my cab
uninstall TF3D
install again TF3D
install my cab
if TF3D crash is because some trick on my cab aren't available for your phone.
Could you please give me the ROM version and the phone you use ?
Click to expand...
Click to collapse
Sorry, I can not.
TF3D was already installed, so I have done in same way you say.
My rom is 1.93 in Spanish
after that, did TF3D run properly or crash ?
could you go in Tweak and go at the bottom of the list.
Did the list change from white background to grey background ?
ok, just check this
Open Explorer,
Go in My Device/Program Files/Diamond TF3D Config
Did you see tweaks_custom file ?
Great thanx dude
geistteufel said:
Ok, when you install TF3D they ask you where
say for example Main Memory
You have to do the same think for my cab, cause I use the same directory of installation
So .. After new tweak appear in gray
Here the pic of the result :
http://celogeek.free.fr/2008/08/celogeek-tf3d-custom-config/
Have fun !
Click to expand...
Click to collapse
I need some help...
- Have installed TF3D Config. Working fine. "Internal memory".
- Have installed celogeek_tweak. "Internal memory" as well.
But no new tweaks appear in TF3D Config?
I have checked:
In My Device/Program Files/Diamond TF3D Config
I see two things: Diamond TF3D config program file & "tweaks" (3.28K) file.
But i dont see "tweaks_custom" file...
It's strange ...
Could you try the older version ? same problem ?
I will push the tweaks_custom file for people who can't install the cab file
Same problem with the older version of "celogeek".
I have found the "tweak_custom" file in program files in internal storage; program files; diamond tf3d.
But tf3d files are in my device, program files... eventhough I have choosen to install them both in internal storage.
Have tried to uninstall and install to the internal storage again. - Same issue.
I don't really know why they don't work
By the way, look the first post, and try the manual solution
Hope they work now
No... does´nt work.
I get this error message
is there a way to completely disbale/Remove panels ?
i found and staled WM6.5 Rom i like and i like the default WM6.5 UI and i dont need the pannels or pannel maneger etc.. i can remap the X key to work as Start button using AEBplus
but i want to permemantly disable is so it dont load into memory on start up...
Go to windows/StartUp and remove PanelManager.ink
Then the panel manager won't load on start
You also need to delete the panel folder in the registry. I think its under software/SE/
I ve just posted a small guide on how to completely remove panels by re-cooking gtrab's ROM using his kitchen.
http://forum.xda-developers.com/showpost.php?p=3726203&postcount=50
Running WM6.5 with EMO's Radio
I only need a few things and I cannot find them..maybe because I am searching for them wrong...
1. Cab for making my Icons in the start menu moonlit or shawdowed or highlighted whatever you want to call it..
2. Cab for changing my start menu icons from 3 to 4. The Cabs that I've tried aren't working.
3. My Dialer is screwed d-hellup when scrolling through my numbers.
babyface215 said:
Running WM6.5 with EMO's Radio
I only need a few things and I cannot find them..maybe because I am searching for them wrong...
1. Cab for making my Icons in the start menu moonlit or shawdowed or highlighted whatever you want to call it..
2. Cab for changing my start menu icons from 3 to 4. The Cabs that I've tried aren't working.
3. My Dialer is screwed d-hellup when scrolling through my numbers.
Click to expand...
Click to collapse
1.) don't know about that one
2.) try doing the reg. hack i believe it's somewhere buried in anryl's 6.5 thread
3.) reinstall the dialer and see if that helps
6.5 roms and some dialers aren't playing well with each other so there is prob not a fix yet
Somehow I have put an altered Comm manager on my BA (as shown in the attatchment), i want to get rid of this 'skin' to the original htc one, the black/gray one, is there a cab or some way to uninstall this?
I think i put Iolite (xplodes) Comm Manager cab on it, how do i uninstall a cab?
if anyone can help will be really grateful, cheers!
Hi.
Did you try Advanced Configuration Tool ?
There's an setting to change the Comm Manager on ur phone!
how do i find this advanced config tool? is there a cab file?
i searched all 'settings' n could not find.
thx
Advanced Config > right button "Menu" > More settings > CommManager
thanks so much, I actually fixed this by installing a new comm manager cab file which was diamond skinned, and it now changed the theme, thank god! that theme did not suit my phone at all.
I upgraded my WM Device to 6.5 but I dont have Titanium/Windows Default theme. Isn't it in the Windows folder in the device like all the other themes? If so, can someone get me it if possible?
Titanium isn't a theme. It's a today screen plugin. Goto Start - Settings - Home - Items and select Windows Default.
Hope this helps.
Also, depends on the ROM you're using. For example, most all of the Energy ROMs don't have the standard Today plugins, or the Titanium (Windows Default) as options.
SinisterJunkie said:
Titanium isn't a theme. It's a today screen plugin. Goto Start - Settings - Home - Items and select Windows Default.
Hope this helps.
Click to expand...
Click to collapse
I guess you didnt read properly, but I said, I dont have Windows Default..
as posted by ayanami, it depends on the ROM u're using. I'm using ROM which has no titanium/windows default option on today plugin.
Flash to another ROM, and ask your cooker to make sure whether titanium is enabled or not