Need Help - Tilt, TyTN II, MDA Vario III Themes and Apps

Running WM6.5 with EMO's Radio
I only need a few things and I cannot find them..maybe because I am searching for them wrong...
1. Cab for making my Icons in the start menu moonlit or shawdowed or highlighted whatever you want to call it..
2. Cab for changing my start menu icons from 3 to 4. The Cabs that I've tried aren't working.
3. My Dialer is screwed d-hellup when scrolling through my numbers.

babyface215 said:
Running WM6.5 with EMO's Radio
I only need a few things and I cannot find them..maybe because I am searching for them wrong...
1. Cab for making my Icons in the start menu moonlit or shawdowed or highlighted whatever you want to call it..
2. Cab for changing my start menu icons from 3 to 4. The Cabs that I've tried aren't working.
3. My Dialer is screwed d-hellup when scrolling through my numbers.
Click to expand...
Click to collapse
1.) don't know about that one
2.) try doing the reg. hack i believe it's somewhere buried in anryl's 6.5 thread
3.) reinstall the dialer and see if that helps
6.5 roms and some dialers aren't playing well with each other so there is prob not a fix yet

Related

Need TouchFlo.exe from Windows dir (ver. 2.3) Please Help!

Hey experts
I downloaded and installed TylerC161 compiliation of Touch-it 2.3 (clean, see this thread) with TouchFLo, but after installing successfully, I still can't get the cube to appear. I had the version 2 before and I simply assigned TouchFlo to one of the buttons. The TouchFlo application or shortcut was installed in Programs/TouchFlo folder. After installing this version, I don't see the TouchFlo in that folder (only TF Setting and TouchSetting), nor do i see it anywhere in the Button Settings. Am I missing something? I only found a shortcut file in the Windows directory. But copy/paste that didn't solve. My question is can someone with working Version 2.3 upload TouchFlo.exe file from Windows directory for me so I can copy it where it is supposed to go? Or do I need to reflash and re-install? Thanks!
I tried Touch-It 2.3 fix.cab but that didn't solve it! Any ideas?! Please?!
you must select your method of cube activation in TFsettings i believe. Its one of those choices.
fzzyrn said:
you must select your method of cube activation in TFsettings i believe. Its one of those choices.
Click to expand...
Click to collapse
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?
coolmen777 said:
I did that, and it still didn't create TouchFLO icon or gave me an option in the Buttons! Very strange!
I even tried another Flash from Genuine RUU, and still the same thing! Please help, anyone?
Click to expand...
Click to collapse
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.
ttran001 said:
Once you select an option in TFsetting, you need to reset the device.
There will not be any buttons to start touchflo, just the option that you selected, meaning either sliding your finger from the top of the screen to the bottom or center to bottom, and etc.
Click to expand...
Click to collapse
Never Mind, it is working! Great job, man, I must have flashed like 5 times... THANKS A LOT!

Commmgr Not showing text (LAN,Bluetooth options)

Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
nufsaid said:
Re-installed Kaiser.CommManager.10Button.3GOnly.Switch.For.Other.Devices-Schen
and now there is no text under the icons, and no menu options. Any suggestions? Thanx in advance.
Click to expand...
Click to collapse
Hi
I had the same issue and first of all think this is a language compatibility problem (...what is your??)!however, did you installed any other CommManager too??
Try to uninstall it (also others if you did!), soft-reset, install only this one again (but be sure the CommManager.exe app is really closed!!)!!If doens't work:
1)go in the registry and check these keys (default value): [HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
->"EmptyMenuBar -> 0"
->"TextColor -> 0"
2)go in the \Windows folder and look for the "CommManager.exe.0409.mui" file (...i'm assuming you haven't an english device/os), cut it and paste wherever you want.Soft-reset and look what happen!If still nothing change the language code (..0409.. -> it is for english, more here) in that file to your default one and overwrite the file in \Windows folder!!Maybe now you get the text, but in english! ...better than nothing!
I have this issue with the 6 button on/off CommManager (i can use it only in English), but using this, like the HTC one (more Beam and 3G buttons, but with 9 (default) and not 10 buttons) i have no language problem, try this one you too!!!
Hope to help you!!
Ciao
Thanx works great now.
SOLVED
nufsaid said:
Thanx works great now.
Click to expand...
Click to collapse
..good!!
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
nufsaid said:
problem came back...this only happens after i reflash my device, i'm using WWE ATT rom now as compared to dutty's 6.1 wwe, and now my 10 button comm manager is doing the same thing. Heres a screen of what it's showing. (chat and icontact should only be viewable from today screen.)
Click to expand...
Click to collapse
...So, if you are using a WWE (english) Rom, your isn't a language problem!!
If you necessarily want this CommManager try to ask in the thread where got it (...I didn't well understand if this is the default one coming in that rom!), or try this other one (also 10 buttons, but different -> look the picture!, and try to install over it, if that is the default)!
...is that the default?? (add more info!)
If yes, first of all ask for help in the rom thread (maybe it's a rom bug, and other people have the same problem)!
If no, try what i said above!
Let me know...
Found Problem!
This only happened when I created a shortcut to commanager from windows folder and placed into startmenu/programs, after deleting shortcut all is well. I was trying to re-map the PTT button to work w/ commanager, the only way to I saw to do this was to copy original commanager to the folder that contained a list for re-mapping options (settings/buttons/program buttons) so I guess i'm **** out of luck on a remap to commanager, if you know anything let me know, thanks for your help.

slither's cubes

on my tytn II I have xda cube and it works fine. I cannot get any version of slithers cube to work. I have tried everything, spent hours, and am sure I followed the instructions from slither exactly
Why not ask this question in the thread it pertains to?
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
leon sprouse said:
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
Click to expand...
Click to collapse
i replied to you in the appropriate thread.
TRY THIS !!!!!
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
3. Install FTouchFlo or FTouchSL.
4. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
5. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
6. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
Link for that Thread ????????????/
cube
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
What device you have?
OK. let me check what I wrote to you.
I aknowledge that I'M HAVING probms with FTouchFlo launching horizontal, don't have time to play BUT MANAGED TO RUN the Cube.
Stay tuned.
Sorry Corrected.
leon sprouse said:
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
Click to expand...
Click to collapse
As you can see didn't change that much but reda this again........
Colored Numbers show the change in orther.
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
4. Install FTouchFlo or FTouchSL.
5. SOFT RESET
6. ((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
7. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
9. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
10. SOFT RESET
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
ANY PROGRAM YOU HAVE THAT ALSO RUN GESTURES?
cube
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
configure touchflo
How do I configure touchflo. what do I do when i open gestures. Im an old man so this is chinese to me
Ohhhh! you didn't have the last version.
Ok! now that you have the LATEST VERSION. Follow the the instructions to install it.
Then go to the following link where MaxMotus created a theme for the CUBE, I didn't installit yet but I'm in that process, I've installed first his Other themes for other Aplications. So far his Set ups are the best NON SLOW ones.
Also make sure to see his other posts.
Stay tune to this thread you've created, and I will walk you thru everything, as I already did it, I've been there.
For now I have to go.
GO HERE FOR THE CUBE SKIN the great MaxMotus created. In the zipis everithing you need also INSTRUCTIONS.
http://forum.xda-developers.com/showthread.php?t=377843
cube
I am just going to install the final 051. It works but some of the icons dont. I really wanted the uno alas.
mm cube
I have the program on my file but haven't tried to open and install it
Basically you just need to drop the file into a directory specified in the install instructions.
Without FTouchFlo????
leon sprouse said:
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
Click to expand...
Click to collapse
Works without FTouchFlo?
Explain.
You guys havent been to this thread..?
http://forum.xda-developers.com/showthread.php?t=354715
I was just about to suggest you go to that thread.
Right away!

Wm 6.1 roms

Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible

STOCK ATT ROM/no fluff (no Manila Autostart)

Interesting question..
I have the stock ATT FUZE rom. I hard-reset which wiped out my device clean and after the first reboot.. right before it said it was 'installing ATT fluff', I soft reset it again.
This gives me the basic ATT ROM without all the fluff and I can manually add existing CAB files already loaded. (yes, this is not as clean as flashing with a cooked ROM but works for me for now). This works for me.
Question is:
How do I get Manila/TF3d to autostart?
TF3D does not load automatically. I have to go to \windows\manila.exe to launch it. I created a shortcut to \windows\manila.exe in the \windows\startup folder but it does nothing.
TF3D does not show in the TODAY ITEMS.
I tried launching \windows\ManialActivateToday.exe but it does nothing.
I could always flash this ROM or do the full ATT install and start removing programs... but prefer to just keep what I have and autolaunch Manila.
What are your thoughts on this?
A quick search would yield the answer. There is a looonnnngggg thread about skipping customization. I know because I started it. You have to install a cab out of the windows folder to make manila work.
ahhh.. even though Manila worked fine by skipping the customization and launching from \windows\manila.exe, looks like you do have to install the PT_Manila.cab to make this happen. Thanks for the tip.

Categories

Resources