i was overclocked rebooted my phone and redid everything, and now on setcpu when i click autodetect recommended frequencies nothing happens. i have a config folder with my frequecny voltage table. what am i doing wrong or missing? thanks for your help
Related
hey
is there anyone running any android build on the Dynamics ROMs? since when i flash this ROM i couldn't enter any haret.exe when i press it the loading window opens and right before the 2 vibrations everything stops (it doesnt even vibrate once) anyone knows the solution, can HaRET have problem with Dynamic ROMs only
i have 8GB SDHC and tested with both old EXT2 and CWM formatings
my Radio version is the normal one
i put everything in the root of SD card
kerfooly said:
hey
is there anyone running any android build on the Dynamics ROMs? since when i flash this ROM i couldn't enter any haret.exe when i press it the loading window opens and right before the 2 vibrations everything stops (it doesnt even vibrate once) anyone knows the solution, can HaRET have problem with Dynamic ROMs only
i have 8GB SDHC and tested with both old EXT2 and CWM formatings
my Radio version is the normal one
i put everything in the root of SD card
Click to expand...
Click to collapse
I have had similar problem, not with Dynamic ROM, but the problem was the same. The problem was the overclock, I was using winno overclocked to 652 Mhz. When I went back to tha original frequency Haret worked as always.
yep, overclocked winmo causes haret to freeze. always set it to 528 mhz before booting android, no matter which oc-app you use.
dynamics 2.1 is overclocked by default, ultrashot explained it in his thread and how to set standard frequency.
So what should he change(please tell the correct lines) and what should he type there?
The same problem for me, tried changing frequency but i don't know if i'm doing it correctly.
http://www.youtube.com/watch?v=JaK62UxHR7I
reset overclock on winmo
AssasinQ said:
So what should he change(please tell the correct lines) and what should he type there?
The same problem for me, tried changing frequency but i don't know if i'm doing it correctly.
http://www.youtube.com/watch?v=JaK62UxHR7I
Click to expand...
Click to collapse
On the Dynamics 2.1 he says:
Overclock may be disabled by resetting HKEY_CURRENT_USER\Software\ultrashot\Overclock\IsEnabled value.
Also you may notice that integrated Android Launcher disables active overclock, so you may use any overclock tools without need of manual disabling.
Overlock may be disabled via \Application Data\OC_disable.lnk as well.
I use WinMO Energy ROM which is not overclocked by default, to overclock it, and of course to go back, I use WiMoSpeed_V1.06.
pbfree said:
On the Dynamics 2.1 he says:
Overclock may be disabled by resetting HKEY_CURRENT_USER\Software\ultrashot\Overclock\IsEnabled value.
Also you may notice that integrated Android Launcher disables active overclock, so you may use any overclock tools without need of manual disabling.
Overlock may be disabled via \Application Data\OC_disable.lnk as well.
I use WinMO Energy ROM which is not overclocked by default, to overclock it, and of course to go back, I use WiMoSpeed_V1.06.
Click to expand...
Click to collapse
I using original ROM. Please tell me what should i change in STARTUP.TXT and what value should i type there?
pbfree said:
On the Dynamics 2.1 he says:
Overclock may be disabled by resetting HKEY_CURRENT_USER\Software\ultrashot\Overclock\IsEnabled value.
Also you may notice that integrated Android Launcher disables active overclock, so you may use any overclock tools without need of manual disabling.
Overlock may be disabled via \Application Data\OC_disable.lnk as well.
I use WinMO Energy ROM which is not overclocked by default, to overclock it, and of course to go back, I use WiMoSpeed_V1.06.
Click to expand...
Click to collapse
Thank you it worked, all i had to do was to install the WiMoSpeed_V1.06 and set it to default but its better to change the registry with any registry editing software so that the Clock speed changes to default permanently
AssasinQ said:
I using original ROM. Please tell me what should i change in STARTUP.TXT and what value should i type there?
Click to expand...
Click to collapse
The line: ''acpuclock.oc_freq_khz''. It's probably set to 652 MHz, so it looks something like this: ''acpuclock.oc_freq_khz=652000''. So if you want 600 MHz, type: ''acpuclock.oc_freq_khz=600000'' or anything you want (in KHz!) If you don't have that line, then it's not overclocked.
HI guys,
i am on twooey 2 with glitch kernel and i am trying to change the governor to conservative.... but it change back to ondemand after few mins... after the screen locks and unlocks, its back to ondemand..
i tried to set it as boot but no luck.. i tried both pimpmy cpu and voltagecontrol.. but no luck
pls help..
thanks
You have to delete a script in /etc/init.d
I dont remember the exact name but its something like "screenstate".
I would advise you to use lippol94's cleaning script, which will reset any kernel settings. Find it here: http://forum.xda-developers.com/showthread.php?p=15609632
Choose the CM7/MIUI one, apply the zip thru CWM, and try to change the governor again and go from there.
Cheers.
go to glitch thread and read, all you need to know should be there
hi..i want to format my phone coz im suspecting a virus. im using floyo 1.0 and tried some other roms,but i usually get random reboot.tried scanning for virus but not working. so i really need any step by step guide or tips on how i can format my phone safely or any of u have tips on how to help me.sorry if im reposting but i cant find any post about this.
any help will be mostly appreciated...
maliceomalice said:
hi..i want to format my phone coz im suspecting a virus. im using floyo 1.0 and tried some other roms,but i usually get random reboot.tried scanning for virus but not working. so i really need any step by step guide or tips on how i can format my phone safely or any of u have tips on how to help me.sorry if im reposting but i cant find any post about this.
any help will be mostly appreciated...
Click to expand...
Click to collapse
Those random reboots can be caused by a number of things, but, in this instance you should put "virus" at the bottom of the list. Since your using customs ROMS, first to check is overclock, you might be pushing your Phone's CPU/GPU too hard.
I would assume you have a rooted phone and using a custom ROM. Reboot to Xrecovery and wipe user data. Next reformat your SDcard. reboot and you'll have a "clean" phone.
ok..i'll try.thanks
viper001 said:
Since your using customs ROMS, first to check is overclock, you might be pushing your Phone's CPU/GPU too hard.
Im using floyo 1.0 so how should i manage to avoid pushing CPU/GPU too hard?
xperia x8 proud owner
Click to expand...
Click to collapse
If you have root explorer. go to system\lib\modules. check and see if you do have the overclock module. also check if you have the undervolt module. Make sure R/W is enable and Move the OC and UV Module to the SDCARD as backup. Reboot and test you phone if its still randomly rebooting.
alternatively, you can check setting >> cyanogenmod settings >>performance >> cpu settings. if there is and you find CPU can be adjusted then reduce the clock to around 691Mhz.
Another option is to install CPUMaster or SETCPU to adjust clock speed.
viper001 said:
If you have root explorer. go to system\lib\modules. check and see if you do have the overclock module. also check if you have the undervolt module. Make sure R/W is enable and Move the OC and UV Module to the SDCARD as backup. Reboot and test you phone if its still randomly rebooting.
i surely have OC no UV module.so must i install UV and then move them to SD..? or i just install UV module and see what happen..?
Click to expand...
Click to collapse
maliceomalice said:
viper001 said:
If you have root explorer. go to system\lib\modules. check and see if you do have the overclock module. also check if you have the undervolt module. Make sure R/W is enable and Move the OC and UV Module to the SDCARD as backup. Reboot and test you phone if its still randomly rebooting.
i surely have OC no UV module.so must i install UV and then move them to SD..? or i just install UV module and see what happen..?
Click to expand...
Click to collapse
try to remove the oc module first. see if that make it stable.
Click to expand...
Click to collapse
i tried benchmark and i get 400+ only. Is that normal?
xperia x8 proud owner
is it an app or a zip to flash it in recovery?
Where can i download it? I cannot find any resources about this
I really want my phone underclock automatically when in low usage
thanks
sonicpeter said:
is it an app or a zip to flash it in recovery?
Where can i download it? I cannot find any resources about this
I really want my phone underclock automatically when in low usage
Click to expand...
Click to collapse
InteractiveX is one of CPU governor, applied inside kernel... it's not an application, it's kernel features...
CMIIW.
redy2006 said:
InteractiveX is one of CPU governor, applied inside kernel... it's not an application, it's kernel features...
CMIIW.
Click to expand...
Click to collapse
Sorry, if I have flashed the NOVA v8 and all the Huexxx stuffs(total number in 5).
would it use the InteractiveX governor automatically? If not, how can it change it?
thanks
You can change via Nova script, access it via terminal.
type su, then nova.
Or you can use setCPU, CPU Master, No-frills CPU Control, or anything related with setting CPU.
CMIIW.
redy2006 said:
You can change via Nova script, access it via terminal.
type su, then nova.
Or you can use setCPU, CPU Master, No-frills CPU Control, or anything related with setting CPU.
CMIIW.
Click to expand...
Click to collapse
thanks.
I found that one of the 5 stuff cannot be flashed and told me "installation abort". the stuff is called "quasar-v8-source.zip". i tried so many time and i nearly give up
I am just wondering the recovery have no enough ROOT permission...any idea?
quasar-v8-source.zip is not compiled kernel for android, that's the source. You can't install it. If you got files like that, perhaps named "source", don't ever trying to flash it to your phone... And that's not the main problem of CWM, it's because you had a mistake by flashing source file..
CMIIW.
hi, im an overclocking/underclocking maniac I go with root explorer and change my cpu profile ( interactive ) settings, to respond faster but to stay less time to max value. also i change the settings for the cpu to sleep sooner when the usage is low to conserve battery this way.
But after reboot , my settings are rolled back at their "original" values. I tried to set the permissions only user can write , but it happened again. Does someone know why and how can i make my changes permanent ? thank you in advanced.
forgot to mention. im not using setcpu or anything. i change the system values in the vanir rom i use.
kessaras said:
forgot to mention. im not using setcpu or anything. i change the system values in the vanir rom i use.
Click to expand...
Click to collapse
try using one of the many apps, vanir might not be saving the settings and applying at boot. Or you could write a simple init.d script to echo your frequencies much earlier in the boot process.
JoinTheRealms said:
try using one of the many apps, vanir might not be saving the settings and applying at boot. Or you could write a simple init.d script to echo your frequencies much earlier in the boot process.
Click to expand...
Click to collapse
i cant. using other apps its even harder for me to find the file to edit the profile i want to make it the way i want. i just tried
found it. only using setcpu i can edit governors the way i want them. but still im curious about finding where is the script in rom and reverts back my changes.