Related
My Tab is stuck at GalaxyTab Samsung" boot screen after i try to flash Roto-JMI-v2, before i was running Overcome v1.1.2 rom and [Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 v12 and it work like a charm. But becurse i deside to sell my TAB i flash back to Roto JMI.
I flash with Odin 1.7 with success, but now it stuck at boot logo.
After that I try many other ROM and flash with Heimdal but no lock.
I have no problem to get download mode, and flash with odin and Heimdal. But I can't get into recovery mode (power+vol up)
I have try almost every solution in the Forum...
What to do next...??
Have you tried flashing kernel only? like the overcome kernel v1.0?
Perhaps that will get you ClockWorkMod Recovery back...and you can go from there.
I try it now, shall i use odin or Helmdall to flash kernel only
With overcome kernel v1.0 it fail in Odin
That's odd. Odin should flash the kernel fine.
Does it give an error? or it just says successful, but you still cannot get into CWM?
It give a error, and I still cannot get into CWM, shall i use a pit to flash
And I have try this....
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install.
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge. Can i only upgrade to kernel 2 when i have a JM* (Rotohammer rom?)
This is very weerd, other with some god solution
NN1123 said:
This is very weerd, other with some god solution
Click to expand...
Click to collapse
You are correct - he needs to repartition the sd card, using the .pit file because it was formatted to ext4.
Your steps are great! I do them one at a time with a reboot between each one.
sreins said:
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge.
Click to expand...
Click to collapse
Oops - if you got your rom from samsung you have a locked bootloader. You can continue to flash those updates, or you can use a patch to remove the lock, then you can continue on.
Can someone please paste the link to the patch?
how about the Verizon gtab...
same thing is happening to me on the galaxy tab from verizon... samsung says to send it.. but i dont want to wait two weeks without my tab... thanks..
Stuck in Bootup Screen
I also have same problem,
I flashed a Rom from "samfirmware" and after it finished it stuck on bootup screen, unable to do recovery mode.
only goes to bootup screen or Dawnload .
can you guys help ?
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Stuck in Bootup Screen
thanks
but I can not get the tab to load in order to run any app. it is stuck in boot screen. any suggestion ?
You cannot get into download mode? That is power + volume down.
Do you know of the adb program?
stuck on bootup screen
I havent used ADB before.
any other solution?
rangercaptain said:
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Click to expand...
Click to collapse
how install apk boot pacth phone only samsung logo or only enter download mode how install boot patch ?
newbie comes here to learn how to flash kernel.
My SGS does not boot and does not enter recovery mode. I can enter download mode though. I suspect it happened after I removed some files from SD card.
Can I access SD card in download mode?
How can I use download mode to restore firmware and the recovery?
Thanks in advance.
u have to reflash your firmware. if u get only downloadmode working u can only reflash your device.
try a custom kernel first. if this wont work, then flash new firmware
Strange.from download mode you can only flash firmware.I think u can use adb and connect your phone to computer.try little search on topics don't rush first read carefully.
[email protected]
@malcho
adb wont work in download mode. only in cwm and after successful boot
So I understand I need to connect to PC in download mode and then use some software like ODIN to flash a ROM? Correct?
thats right.
may u can flash via kies, if u want a stock rom from samsung
I didn't know that info about adb.Thanks for info
[email protected]
Well, it's strange but looks better. Even before I did anything with ODIN the phone booted into the new ROM but I still cannot get into recovery. Seems like ROM installation procedure deleted something essential to run the recovery.
So now I have the download mode and Android working.
I am trying not to make any sudden moves so that I won't lose to ability to boot the ROM. What would be the best way to restore ClockworkMod recovery?
What ROM are you running now?
From a running stock-ROM the easiest way is to flash some custom kernel that includes CWM.
Here's a list http://forum.xda-developers.com/showthread.php?t=966646
For 2.2.1-based ROM I prefer Speedmod.
For 2.3.3-based, choose your own
edit: There are some ROMs/kernels that can only enter recovery when USB-debugging is on.
profalbert said:
What ROM are you running now?
Click to expand...
Click to collapse
I've just switched from Darky's 9.2 to PilotX with 2.6.35.7-I9000X[email protected]#Beta4.2_1 kernel.
From what you are saying I understand CWM recovery needs Linux kernel to run. I thought it's a stand alone boot-loader independent from the OS and kernel.
I installed CF-Root-XW_NEE_JVH-v3.2-CWM3RFS which comes with CWM recovery via ODIN with no effect. I still cannot reach recovery mode.
My phone came with 3e recovery which I downgraded to 2e (I don't remember how I did it then). Is it possible it has something to do with the problem?
You should always flash to stock when you have an issue.
You can also use Darky's resurrection (at least, part A: Pit with re-partition)
Then flash the original firmware (from samfirmware.com)
Thanks to everyone.
The problem was solved using http://www.v00d00.co.il/GBFINAL.pdf guide. Note, this guide is only relevant for Hebrew PilotX ROM.
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Fragda said:
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Click to expand...
Click to collapse
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Also wrong forum. This is the i9300 Q&A not i9305 Q&A
You can use the report button in the top right of your post /!\ to move it to the right location, which is here: http://forum.xda-developers.com/forumdisplay.php?f=1822
crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Fragda said:
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Click to expand...
Click to collapse
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
I can not enter adb shell ether because I never had the chance to enable usb debugging. Is service center really the only way? I can still install files from default recovery.
yes. sadly service center is the only option you have now
Sent from my GT-I9300 using XDA Premium 4 mobile app
crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
You were totally right! Now CWM recovery works.
JJEgan said:
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
Click to expand...
Click to collapse
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Flash stock and get the phone working .
jje
Fragda said:
You were totally right! Now CWM recovery works.
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Click to expand...
Click to collapse
Give me the link to the rom you want flash. The backup you have made not work?
I finaly got everything to work!
I flashed stock rom that I downloaded from sammobile through odin. I want to thank you guys so much for helping me out, it wasn't a easy road. Chainfire 3D ruined everything for me but I should have been more careful with installing that. Hopefully I can find something better to make the textures not all white in HD games but thats a different story.
Thanks again everyone!
I NEED HELP! Im a noob, i have a samsung S3 GT-i9305 ( GT-I9305GSMH) And i have soft bricked it by flashing a PDA that was meant for only i9300 - i then tried recovring it by doing alot of stuff but it wont work ... does anyone have any idea on how to fix this problem ? please .... btw i was using odin to root my phone but the cu*t fukced me over.... help anyone.. im stuck in downloading mode please do not remove target..
Hello Every Body
Appreciate your help as i am new to this .
I have Galaxy GT-N7000 , & I rooted it with Stock Recovery+Safe Kernal + CWM Recovery as in this post
http://forum.xda-developers.com/showthread.php?t=2217840
it work great with no problem at all , then i update CWM recovery using ROM Manager & try to backup my ROM using ROM Manager , the phone is restarted directly & stuck at Galaxy Note GT-N7000 LOGO and stop booting , i can't go to recovery mode , i can only go to download mode
How to solve this problem ?
is there any solution to fix this problem & keep my data on phone ?
I am a beginer , this is my 1st post & the only thing i do is to root my device and use the apps
Please:
1- write detail instructions or link to a post so i can follow & learn what to do
2- Appreciate to put a link to any needed tools
Thank you
Rom manager is horrible. And useless.
If you can enter download mode, just Odin flash a stock firmware and redo the steps to get recovery. You should only create rom backups via recovery, Rom manager does not seem to support the Note 1
AutumQueen92 said:
Rom manager is horrible. And useless.
If you can enter download mode, just Odin flash a stock firmware and redo the steps to get recovery. You should only create rom backups via recovery, Rom manager does not seem to support the Note 1
Click to expand...
Click to collapse
would you mind to give me more detail , how to Odin Flash a stock firmware , & what do you mean by steps to get recovery ?
alfa_newuser said:
would you mind to give me more detail , how to Odin Flash a stock firmware , & what do you mean by steps to get recovery ?
Click to expand...
Click to collapse
All these questions are answered in the forum.
Odin flashing
If you read your first post, it says 'CWM recovery.' Look through everything here to get a clearer picture.
AutumQueen92 said:
All these questions are answered in the forum.
Odin flashing
If you read your first post, it says 'CWM recovery.' Look through everything here to get a clearer picture.
Click to expand...
Click to collapse
Many thanks