Database Develop

[Q] Bell i9000m Official 2.2 Froyo Upgrade Question(s)

So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?

Funkadelick said:
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Click to expand...
Click to collapse
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4

BlackDino said:
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
Click to expand...
Click to collapse
how do you root jk4 then ? 2.1 eclair on bell i9000m

1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?

Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
A lot of people have been complaining that their SD cards have been screwed. Luckily mine went through without any problems and hasn't given me any trouble so far.
Froyo is insane tho, before the phone used to lag a bit, now the moment i touch it it opens. No need for lag fix in my opinion, everything works blazing fast as is.
One thing to watch out for is the WIFI. It was working normally at the beginning but after 3 hours it just disconnected for no apparent reason and has trouble connecting back.
Good luck

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe

urfase said:
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Click to expand...
Click to collapse
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.

Videonut said:
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Click to expand...
Click to collapse
1) but will it erase root upon upgrading?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Yep, but for optimised result, this is a must do!
You can probably have it work without doing a factory reset, but you can encounter weird behavior, bugs and stuff!
Anyway, you might end up doing it anyway to solve the firts boot issue

I'm one of the users who upgraded to Bell Froyo (from stock FW with root and lagfix - undid the lagfix before upgrading) and then encountered the broken internal SD card issue. I ran Volume UP/Power/Home(middle button) to reformat everything and it is up again. Inside the OS, I ran the internal factory reset again. So far so good. *crossing fingers*

I updated mine last night. However I've had major problems since. Initially it would just freeze up randomly and require removing the battery to get it back up and running.
Today I decide to reset it to defaults which seemed to go fine, although shortly after getting it all setup again, some Samsung app of sorts came up with an error and had to be forcefully closed. Then I was left with a black screen and only the notification bar.
Powered off the phone and went to turn it back on, and now it just loops through the Samsung GT i9000 screen (white writing). Not even the colourful S logo comes up.
I'm able to get it into Download Mode but not Recovery Mode. I'll have to do some reading about this Odin stuff tonight. Hopefully I can revive it, otherwise I guess I'll had to send it in for repairs. No idea if Virgin Mobile repairs will go through Bell or if I take it to them directly.
This is my first Android phone and I've only had it for just over a week. I thought I was making a good decision, but now I see it has quite a defect with the internal SD card failing.

Slow after upgrade
I upgrade my phone last night ( as per bell and Samsung) It is now slower than before. Quadrant Standard has it under 900.
Any ideas how to fix it?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Just use SuperOneClick after you upgrade to Froyo, I've tested and have root on JK4
http://forum.xda-developers.com/showthread.php?t=803682

I have an unlocked phone from Bell that I already upgraded to the international (or European?) JPP/JPO 2.2, what is the best way to downgrade or restore back to default firmware before using Kies to get the official update? Does factory reset restore stock firmware?

I upgraded to official Bell froyo last night ..thn rooted.But how can i Unlock now? i tried using SGS unlock app it says no unlock codes found?? Please help

God damn samsung and bell!
it seems like they're giving defected phones to their costumers!
I have the corrupted sd card too, took it to guarantee now it takes more than 1 month to fix this!
this is f-ing xmas for god's sake. i want my phone

Same problem here!
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.

ciudadbonita said:
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
Click to expand...
Click to collapse
Have you found any solution yet?? I am thinkin to flash back orignal samsung firmware using Odin n then unlock..atleast i will be able to use the phone then

Videonut said:
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
Click to expand...
Click to collapse
what if after this, it's still stuck after the s logo boot up?
does this mean i have a broken internal sd?

Froyo 2.2 need help unlocking(BELL)

hello all i tried couple things z4root does not work no longer ....all i want is to unlock this phone no idea how ....any help would be appreciated want give this phone as gift, originally with bell locked i want give it to family member but wanting to unlock it work on rogers ..?thanks

Rooting
To get root, SuperOneClick works:
http://forum.xda-developers.com/showthread.php?t=803682
To unlock, so far nothing has worked for me.

This is driving me crazy. I have an I9000M bought last month. I couldn't unlock JK4. I tried flashing back to JH2 but that won't unlock either.
My previous I9000M on JH2 unlocked without a problem. I guess that Samsung no longer includes the unlock codes on the phones anymore.
Does anyone have any idea how to unlock this damn thing?!!

Unlocked
I finally paid $35 to get it unlocked: www.freeyourcellph.weebly.com

mine is locked too
but the site that u post...
the guy told me that i have to go to him
but he is not in vancouver ....

Download the application called SGS Unlock from the market.
Tested and worked on 2.1. I am too scared to upgrade it yet lol
Steps:
1) Download and install application
2) Open application.
3) Click ok or something similar to go next page
4) Press the Menu button, the button on the right side of the hard button
5) Click Root or no Root Gen Code, depending if your phone is rooted or not.
6) Wala, codes should be found!

so .... i guess noone is able to unlock 2.2 then......
stupid bell..... why they locked the phone in the first place
anyway i can flash it back to 2.1
so i can unlock it again ??

madsatan said:
so .... i guess noone is able to unlock 2.2 then......
stupid bell..... why they locked the phone in the first place
anyway i can flash it back to 2.1
so i can unlock it again ??
Click to expand...
Click to collapse
Did u tried the application that I suggested? It should work on 2.2 probably. Try it out and see first before flashing back.

not working
where can i download the right 2.1 files??

Try this thread: http://forum.xda-developers.com/showthread.php?t=885228

no link for the file

You should ask it at the other thread.
I never tried that myself yet, so not sure how to go about it either.

miniflight said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=885228
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=761045&page=128
this should help

Hey any luck with the unlock ? Im also stuck with froyo 2.2 with bell and cant seem to unlock it....
i tried going back to my old software and it went to the flashing S screen and kept looping there... put back 2.2 and now cant use the phone ....
I NEED THIS UNLOCKED :'(

[Q] New phone with 2.2 preloaded

Hello, I just recieved my new captivate, after returning old one on warranty, it came preloaded with 2.2 Froyo. My question is: can I still do a ODIN flash to get it back to 2.1? Thanks in advance for any help

Odin one-click flash to stock 2.1 worked for me after doing the official KB1 2.2 update via Mini Kies. Batch 1008 with 3-button combo download mode working.

Maybe I should have been more informative. The new phone came with 2.2 installed. I do not know if it ever had 2.1 on it. Using ODIN3 has the term "flash back to stock". Since this came with 2.2 I am assuming that 2.2 is stock. Will using ODIN3 give me a 2.1 (JF6) operating system even if it never had 2.1 installed on the phone? Also something else I am scratching my head about. The phone I am returning is an 1008 batch and the new phone is an 1007 batch. Is the new phone actually built before the phone that is being returned? Could this mean it at one time had 2.1 installed? Could it mean I recieved a refurbished phone? I was hoping for a new build thinking they fixed the problems of the old builds. Again thanks in advance for any help

there are 2 Odin3 programs, the Odin3 one click flash to stock (2.1 stock) and the odin flash anything you want Odin3 1.7 version.
yes that odin will do 2.1
what carrier are you? att or rogers? there are 2.2 flash and or upgrade packages.

Trusselo said:
there are 2 Odin3 programs, the Odin3 one click flash to stock (2.1 stock) and the odin flash anything you want Odin3 1.7 version.
yes that odin will do 2.1
what carrier are you? att or rogers? there are 2.2 flash and or upgrade packages.
Click to expand...
Click to collapse
hey bud...I have some similar problem...so I got this replacement phone after i bricked my good phone becoz of battery issue...now I was on continuum 3.1.1 but i decided to flash CM7. So I used Odin one click to stock. But I wasnt aware that my phone is one of those builds which looses 3 button combo....so i lost 3 button combo and i was frustrated I updated it to official froyo 2.2 from ATT using mini kies...now after researching a lot...I came across Odin with 3 button combo fix http://forum.xda-developers.com/showthread.php?t=818439
Now I am not sure, if I use this Odin...will i go back to stock 2.1 eclair with my 3 button fix back...as the description of this program claim that it works same as Odin one click but with 3 button como fix....
can anyone tell me if this wont brick my phone and i can go back to stock 2.1 with 3 button combo safely?

http://forum.xda-developers.com/showthread.php?t=818439
Now I am not sure, if I use this Odin...will i go back to stock 2.1 eclair with my 3 button fix back...as the description of this program claim that it works same as Odin one click but with 3 button como fix....
Click to expand...
Click to collapse
with the link you provided, please go to it and read the BIG BLUE LETTERS at the very top of post. read the rest of post for instructions,

Trusselo said:
with the link you provided, please go to it and read the BIG BLUE LETTERS at the very top of post. read the rest of post for instructions,
Click to expand...
Click to collapse
LOL i read it..but i am not sure if this will work for me..as i am on 2.2 stock...so whats stock for me...i am confused there...

it will flash you to the att stock 2.1 with 3 button fix. att stock not your stock. your stock is gone. that file is a stock rom with 3 button fix.

Well I managed to get a few questions answered both by the people responding to this post "Thank you very much" and customer services of Samsung and AT&T. Called Samsung and they confirmed that the batch # on my new phone makes it older than the phone I am returning. They also informed me that it was more than likely a refurbished model. This would take care of the question of if it ever had 2.1 installed. Called AT&T and explained my concern about recieving someone else problem phone and them sending me a model older than the one I am returning. They confirmed that it was a refurbished model. I will call warranty service again tomorrow and see what they can do. I would atleast expect a phone with newer manufacturing dates that may not have had the problems of the earlier builds to begin with.

davietr said:
Well I managed to get a few questions answered both by the people responding to this post "Thank you very much" and customer services of Samsung and AT&T. Called Samsung and they confirmed that the batch # on my new phone makes it older than the phone I am returning. They also informed me that it was more than likely a refurbished model. This would take care of the question of if it ever had 2.1 installed. Called AT&T and explained my concern about recieving someone else problem phone and them sending me a model older than the one I am returning. They confirmed that it was a refurbished model. I will call warranty service again tomorrow and see what they can do. I would atleast expect a phone with newer manufacturing dates that may not have had the problems of the earlier builds to begin with.
Click to expand...
Click to collapse
yeah u r right...I had a nice phone from new batch..which never lost 3 button combo...then becoz of my stupidity i bricked it...acted innocent infront of ATT and got replacement, but this phone is reconditioned and is from that batch which looses it 3 button combo...which I didnt know and I lost it now.,,
but this phone as awesome battery life and GPS....i am on stock 2.2...and I upgraded it myself

24hrs later and thinking I have overreacted. I returned phone because of random shutdown issues and absolutely horrible gps (even after several rom changes). The replacement phone (refurbished) has an awesome gps and no problem with the random shutdown "so far". I got a lock outdoors as soon as I turned it on not even a second of wait time. I even got a lock in my basement within 15 sec. I test drove it today. Instant lock, perfect tracking, no putting me on side roads, no going thru intersection I have stopped at, turned when I turned and no loss of signal. In other words PERFECT! I think the gps is a hardware problem that has a fix. I don't care when the phone was built as long as it works the way it is suppose to. Now I just hope that after I flash a new rom it stays that way.

viny2cool said:
yeah u r right...I had a nice phone from new batch..which never lost 3 button combo...then becoz of my stupidity i bricked it...acted innocent infront of ATT and got replacement, but this phone is reconditioned and is from that batch which looses it 3 button combo...which I didnt know and I lost it now.,,
but this phone as awesome battery life and GPS....i am on stock 2.2...and I upgraded it myself
Click to expand...
Click to collapse
Ummm... my phone is one of that batch (1008), and when I flashed with one-click I did lose 3-button. But flashing back to stock with ODIN 3 gave me 3-button back, and I' be been able to use it every since, since I'm one of those people who always flashes back to stock whenever I change or update ROMs...though honestly, I never use the 3-button option. I root, add Clockwork, and get into download mode from there. Works for me... Flashing to stock with ODIN 3 (NOT the 1-click version!) should give you back 3-click, too.
The real issue to me is AT&T giving you a used phone and calling it new. Beyond being really tacky, isn't that kind of fraudulent? Or is there something in the contract that makes lying about that okay? And if it's the latter, why don't they just tell you up front that you might get a refurb to replace your new one?
Tacky, I tell you; just tacky...

Update. Just flashed my phone back to 2.1. Flashed the "Paragon RC6" rom. Note to self: make sure you send a few donations. Everything is working great life is good. Refurbished or brand new doesn't really matter at this point. Awesome phone that works awesome. This phone is my very first cellphone. I was clueless until I found this forum. Thanks to everyone that contributes to this forum and the dev's that make having this phone worthwhile.

kevalin said:
Ummm... my phone is one of that batch (1008), and when I flashed with one-click I did lose 3-button. But flashing back to stock with ODIN 3 gave me 3-button back, and I' be been able to use it every since, since I'm one of those people who always flashes back to stock whenever I change or update ROMs...though honestly, I never use the 3-button option. I root, add Clockwork, and get into download mode from there. Works for me... Flashing to stock with ODIN 3 (NOT the 1-click version!) should give you back 3-click, too.
The real issue to me is AT&T giving you a used phone and calling it new. Beyond being really tacky, isn't that kind of fraudulent? Or is there something in the contract that makes lying about that okay? And if it's the latter, why don't they just tell you up front that you might get a refurb to replace your new one?
Tacky, I tell you; just tacky...
Click to expand...
Click to collapse
I would admit this all is easy...i got my new phone in september and had almost flashed all roms on xda for captivate...but once i didnt charge the battery full and used odin 1 click...which bricked my phone...
now i got replacement phone...which was refurb and ATT guys told me that...but as my original phone was actually bricked (means dead..no hopes) I accepted it...but ignored the fact that it can loose 3 button combo...while i was flashing it to stock (having CM7 in mind to flash next) I suddenly realized that i lost 3 button combo (which is required for CM7). I felt betrayed...so i thought to forget flashing any rom and go to stock 2.2....BIG MISTAKE....after 2.2, i was not able to flash any update.zip...i tried for root, CWM, 3 button combo...always got same error E:/signature un verified..
So in desperation I used AIO 3.0...and yes i managed to get the famous phone-!-computer screen....lol I dont have Jig...so i got it replaced again...
atleast from all this i learned how to use ADB (to get into recovery and download without 3 button combo)
Now waiting for my next refurbished phone...

galaxy tab stuck at boot logo: HELP

Hi guys,
I really need your help here. It's been 3 weeks now that my tab always reboots to samsung logo and i'm not able to make any ROM working. the tab is Canadian (Rogers) but was rooted and flashed to some euro ROM to enable phone calls for Moroccan network. (I think the build was froyo.xxjme, not sure. that was long time ago). Everything was working fine.
To make the long story short.I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another)
Thanks for reading my post.

Any solution ?
Thanks is advance

No real answer but to return to Samsung and let them fix, this is what I did.

jerrycycle said:
No real answer but to return to Samsung and let them fix, this is what I did.
Click to expand...
Click to collapse
Hummm. Gonna be hard. I'm In Morocco now. tab bought from Canada. I think I'm screwed lol.
Thx Jerrycycle

Had the same problem. Shipped to Samsung....

Have you tried another of the ROMs off samfirmware...
In a normal situation I would NEVER EVER NEVER EVER EVER suggest someone flash something from that dreadful site... but in this case you already have, which did likely lock your bootloader... So perhaps trying one of the signed ROMs from them will at least get you booted...
*shrug* I dunno, seems a lot of people have already had to give up on this situation by sending it back to samsung... but if you can access download mode, there has got to be a solution...

IF U STILL NEED REPAIR U GALAXY AND U STILL IN Casablanca contact me in derb ralaff

kyo21 said:
IF U STILL NEED REPAIR U GALAXY AND U STILL IN Casablanca contact me in derb ralaff
Click to expand...
Click to collapse
Thanks Kyo21 but the issue has been fixed.
Sent from my GT-P1000 using XDA Premium App

how did you fix it ????

Samsung Captivate Flashing Help?????‏

Hello
I am having the Unlocked SAMSUNG CAPTIVATE (SGH-I896) of Canada Rogers Network. I am using the same from last December, 2010. As now the firmware of my phone is crashed and it is not even going in DOWNLOAD MODE or in RECOVERY MODE, by which I can repair my crashed firmware and also now my phone is not working.
My request to you is that can you tell me that if you can FLASH my SAMSUNG CAPTIVATE (SGH-I896) with the ROM of the mobile if you have with you, otherwise I will provide the Original Firmware Backup which I am having with me. So please tell me whether you can upgrade the firm with the ROM you have or mine.
Please help me to solve my number, as I am from India, now I cannot send my mobile to Canada back.
Thanks

I'm sorry I know english isn't your native language but could you try and reword your question?
And what do you mean by the phone isn't working? What exactly does it do?

studacris said:
I'm sorry I know english isn't your native language but could you try and reword your question?
And what do you mean by the phone isn't working? What exactly does it do?
Click to expand...
Click to collapse
Eh thanks Studa, I came across his question earlier and didn't understand it either.
@ OP - if you could rephrase that, we'd be more than happy to help you

Hmmm...this is a tough one, and I work with offshore resources on a daily basis. My guess is he unlocked his cappy, took it to India, tried to flash something, bricked it, and needs help restoring a rom file he has on his phone, or a rom from here.
Sent from my SAMSUNG-SGH-I897 using XDA App

sailzfast said:
Hmmm...this is a tough one, and I work with offshore resources on a daily basis. My guess is he unlocked his cappy, took it to India, tried to flash something, bricked it, and needs help restoring a rom file he has on his phone, or a rom from here.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
So far, it seems to me like he needs a way to flash Eclair or Froyo. If so here's the answer: Odin3 one click.

BWolf56 said:
So far, it seems to me like he needs a way to flash Eclair or Froyo. If so here's the answer: Odin3 one click.
Click to expand...
Click to collapse
+1 and just to answer a possible question ... The phone should still be unlocked after flashing to stock with odin.

Hello
thanks for replying me, my original post link is this of whom you made the reply:----
http://forum.xda-developers.com/showthread.php?t=1041785
Actually I flashed my Samsung Captivate with Froyo GT-[I9000] and the same ROM was flashed with Odin v1.8 and when I restart my mobile then i come to find that the BACK KEY of mobile is not working and then I mistakenly apply this method on my New flashed Samsung Captivate, the link of the post after searching on Google.com is as below:
http://www.addictivetips.com/mobile...d-recovery-mode-in-samsung-galaxy-s-gt-i9000/
and after that when I switch off my mobile for checking whether my problem of BACK KEY get solve or not then I come to know that my Mobile is not starting normally and the same was also not starting in RECOVERY or DOWNLOADING MODE. I tired all key combination but all get in vein.
So can you help me in solving my SAMSUNG CAPTIVATE problem. and I have the unlock code with me, so that I can unlock my mobile again easily without any problem.
I will wait for your reply.
Thanks

Buy a jig. It will put it in download so you can do odin one click. I use AIO toolbox to do it.
rocktheway_2009 said:
Hello
thanks for replying me, my original post link is this of whom you made the reply:----
http://forum.xda-developers.com/showthread.php?t=1041785
Actually I flashed my Samsung Captivate with Froyo GT-[I9000] and the same ROM was flashed with Odin v1.8 and when I restart my mobile then i come to find that the BACK KEY of mobile is not working and then I mistakenly apply this method on my New flashed Samsung Captivate, the link of the post after searching on Google.com is as below:
http://www.addictivetips.com/mobile...d-recovery-mode-in-samsung-galaxy-s-gt-i9000/
and after that when I switch off my mobile for checking whether my problem of BACK KEY get solve or not then I come to know that my Mobile is not starting normally and the same was also not starting in RECOVERY or DOWNLOADING MODE. I tired all key combination but all get in vein.
So can you help me in solving my SAMSUNG CAPTIVATE problem. and I have the unlock code with me, so that I can unlock my mobile again easily without any problem.
I will wait for your reply.
Thanks
Click to expand...
Click to collapse

my suggestion is to buy and use this:
http://cgi.ebay.com/ws/eBayISAPI.dl...21187&ssPageName=STRK:MESELX:IT#ht_651wt_1139