Related
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.
silly me decided to install a custom battery icon. In the description for the mod on app planet it said to use with froyo but didnt say it would not work with eclair. I installed the mod without problems and I thought everything was going well, but now my phone is bricked, and wont load past the samsung i896 boot screen even after deleting all user data and wiping my cache in recovery mode. So I guess my only option now is to flash a rom using odin, but id rather prefer not to flash to a stock ATT 2.1 rom, i would like to flash back to my original stock rogers.
Is it possible to flash to an ATT rom, then do a factory reset from the privacy settings of the phone to bring me back to rogers stock rom?
ATT rom =/= Rogers rom
You'll need to search and find a Rogers rom you can stick in Odin and flash with if you want Rogers
I don't think you can easily return to Rogers stock rom using odin. Most people end up having AT&T logo on boot. However, since you're soft bricked anyways, why don't you try using Heimdall, new Open-Source Flashing Software and this dump generated from stock Rogers phone.
I haven't seen any reports of tests on Captivate yet, but it seems to work well on other Galaxies. Check Heimdall thread for more info, and if it works well for you, please report to this thread. Good luck!
thanks, i installed heimdall perfectly fine, it recognizes my device, but i cant download that PIT file from megaupload, its failed to download multiple times. Is there any other links?
I will keep trying
all good to go now,
used this rogers stock rom
http://www.megaupload.com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App
Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.
sshvetsov said:
Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.
nostratispeak said:
Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.
Click to expand...
Click to collapse
i used heimdall, which was linked above, but I was able to get into download mode through my phone since it was soft bricked. IF you can get back into Download mode, then you are fine... Keep trying until you do, otherwise you might have to use the JIG method.
stavs said:
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.
Click to expand...
Click to collapse
That's great news! I'm sure a lot of rogers captivate users will be very happy to learn that. Just curious, where did the linked rom dump come from?
EDIT: Nevermind, found this thread describing Rogers stock restore procedure using Heimdall and the bundle you used.
@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.
sshvetsov said:
@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.
Click to expand...
Click to collapse
Yup. Just did. The site is back up and working. I've the downloaded the files too. Now, to get my phone to work.
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?
nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
Click to expand...
Click to collapse
Your device isn't bricked as such, it's caught in a boot-cycle. This is actually worse than a soft brick and in some ways is comparable to a "hard" brick. It's comparable to a hard brick because when you're in a boot cycle you usually can't get into download mode. Presumably the only option is to use a custom JIG, as you've mentioned.
There is no official terminology but a soft brick is generally when your phone displays the "connect phone to pc" screen. A hard brick is a bit more difficult to define, but I'd say it's fairly reasonable to assume that this is when your phone won't turn on or charge. A brick (full brick?) is when your device is absolutely not recoverable by any means.
nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?
Click to expand...
Click to collapse
thats great news than, now with the one of the downloaded roms you have saved on your computer, take the data (ie Factoryfs.rfs,cache.rfs, modem.bin and Zimage) and link it appropriately in the program. Then just click the start button and it will automatically install the rom within minutes. You shouldnt see anything pop up, i dont remember seeing anything, but during the installation there should be a download bar on your phone to indicate data is being transfered and downloaded to your phone. After your phone should reboot and be back to normal.
stavs said:
all good to go now,
used this rogers stock rom
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
Does this remove the AT&T boot logo and replace with the Rogers logo as well? Stavs, I'm assuming you went from the Rogers ROM, back to the Rogers ROM, so this probably not apply to you, but have any of you guys been able to get rid of the AT&T logo from a previous flash, and restore the Rogers logo using this method, and ROM?
stavs said:
all good to go now,
used this rogers stock rom
megaup*****com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
used the same rom flashed it with odin but didnt load the pit file... made sure re-partitioned was UNchecked and off i went... restored my phone to 2.1 and was finally able to get kies to recognize my phone and upgrade it after 5 days in hell trying various things, flashing different "stock" ROMs... i finally did it tho... running froyo as we speak...
I am not sure if anyone suggested this already but i896 users can flash stock Rogers 2.1 using this method. No AT&T screens. Works great.
http://forum.xda-developers.com/showthread.php?t=979133
I looked through the forums for this but couldn't find the answer. Hosed Froyo (somehow) and want to go back to ATT stock, then reinstall. Have AT&T Captivate One-Click Root.exe but get a :signature verification failed message so it won't go back. Maybe it's the update.zip file that is corrupted or something, but not sure how to proceed. Used Odion (I897UCJI6-OCD-REV02-Low-designgears_1_.exe) and thought that would take me back to original Eclair/ATT ROM but all that did was put in a fresh version of Froyo...which might be good if it works but really wanted to start from scratch (Eclair.).
Anyway to go back?
http://forum.xda-developers.com/showthread.php?t=731989
Look for the odin thread in development to get you back to jf6. Just make sure you use the one with the three button fix included if you need it.
Wrong odin
http://www.fileserve.com/file/emnCn2j
Provided your build is 1009 or lower.
Can find this under battery
Learn how to use the 1 Click HERE...
Then you will be good to go. Use it to re-flash stock 2.1 or the 2.2 leak.
If you can't get to download mode or want an easy reliable way to always get there. Then just get a JIG like the on HERE...
Why would you tell him to learn how to use odin when his op said he has used it? And why do you spam your jig sales all over?
jfish00 said:
:signature verification failed message so.....
Anyway to go back?
Click to expand...
Click to collapse
froyo has a new recovery version , 3e fix it here...
http://forum.xda-developers.com/showthread.php?t=909213
there is also always a copy of the fix file in my magic folder
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Trusselo said:
there is also always a copy of the fix file in my magic folder
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Click to expand...
Click to collapse
Really? Look at all those warez......
Always a good idea to keep somewhere on the computer for flashing a new rom. or sending back to att/samsung
Thanks everyone. I will read up on the aboe.
Should have mentioned phone is 1010 version (under battery) and I did get it to go back to Froyo 2.2, which I had read reflashing should be done by going back to stock then reinstalling, and so that is what I was trying to do.
Thought I had backed up my original update.zip for for just such an event but apparently either didn't or can't find it :S
The reinstall/reflash seems to be doing ok...unfortunatly titanium pro didn't back up all my user apps so I'm having to go back and reinstall everything, but I'll eventually get it all back.
Thanks again for all the replies!
I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)
Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD
Ok, thanks. I'll post an update tonight after I get back home.
SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM
HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"
HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them. *fixed
Caelrie said:
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them.
Click to expand...
Click to collapse
Easy fix. ODIN flash the stock COD6 software. Then start over again with cf auto root. There is a thread that had all of the files you need in one zip.
Sent from my SM-N910T using XDA Free mobile app
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Caelrie said:
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Click to expand...
Click to collapse
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
absinthesummer said:
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
Click to expand...
Click to collapse
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Caelrie said:
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Click to expand...
Click to collapse
Cool, glad you got it sorted. Yeah as long as you can access download mode you're golden, and a bonus if you can get into recovery as well.
Excellent job actually searching and reading and fixing your problem, far too many people want answers just handed to them, so kudos to you for that.
Just for the future if you need help, try to remember and list all steps you took (even if you don't know where you went wrong) in excruciating detail because it helps us troubleshoot and figure out what the problem is. Without certain pertinent info it could take a lot longer to solve it.
Overall good job, glad you're up & running.
Go to rapture download the rom and load it to sd card. Then follow directions exactly and u will be ok. No loading anything. Fresh start
BAD ASS NOTE 4
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
ElAguila said:
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
Click to expand...
Click to collapse
Technically you shouldn't be flashing just the partial firmware. It sets up a base so that you can flash a lollipop rom in recovery without issues. I'm not sure why someone is recommending just flashing the partial firmware only. I guess they figured it wouldn't cause issues.
Anyway, here is how the partial firmware should be used:
Flash partial firmware in Odin
Flash flashable stock lollipop in recovery.
Set up rom, make a backup.
From here you can restore your old kitkat backups without the problems that some are seeing (those who Odin the full firmware are having problems restoring kitkat backups/flashing kitkat roms without Odining ank4 first). The partial firmware prevents that but it's designed to be flashed right before flashing a lollipop rom.
I hope that helps some of you who are having issues.