Related
Ive lost all usb connectivity, I can charge the battery but it will not connect to any pc with any cable under any configuration.
Ive recieved my replacement from warranty. But I would like to get the broken phone back to stock kernel before I return it. It is currently runnig http://forum.xda-developers.com/showthread.php?t=784170 by atinm.
I have stock jf6 rom but kernal still shows non stock from voodoo.
Is there a way to do this such as an update.zip that Ive missed.
I have looked through the captivate section for days but cant find anything that will help, If someone knows of something Ive missed please point me there. I would apreciate any assistance.
My concern is if I cant get kernel back to stock it might void my warranty. The irony is I didnt alter the kernel untill after usb broke.
Thank you for reading.
shadow65781 said:
Ive lost all usb connectivity, I can charge the battery but it will not connect to any pc with any cable under any configuration.
Ive recieved my replacement from warranty. But I would like to get the broken phone back to stock kernel before I return it. It is currently runnig http://forum.xda-developers.com/showthread.php?t=784170 by atinm.
I have stock jf6 rom but kernal still shows non stock from voodoo.
Is there a way to do this such as an update.zip that Ive missed.
I have looked through the captivate section for days but cant find anything that will help, If someone knows of something Ive missed please point me there. I would apreciate any assistance.
My concern is if I cant get kernel back to stock it might void my warranty. The irony is I didnt alter the kernel untill after usb broke.
Thank you for reading.
Click to expand...
Click to collapse
Thank you designgears and koush. your jf7 ota and clockwork mod put me back to stock.
I used recovery-update.zip(koush) to run jf7 ota.(designgears)
I had to do it that way to keep voodoo from reinstalling.
shadow65781 said:
Thank you designgears and koush. your jf7 ota and clockwork mod put me back to stock.
I used recovery-update.zip(koush) to run jf7 ota.(designgears)
I had to do it that way to keep voodoo from reinstalling.
Click to expand...
Click to collapse
I have the same USB issue...tried everything its has been a real pain in the ass . I am currently rooted with jf7, flashed cognition 2.1.3 voodoo enabled. The phone runs better then ever but I gotta have my USB just in case **** happens.
I would like to go back to stock unrooted before I exchange the phone . I searched around the forums for the recovery-update.zip mentioned above. I assume it was a private exchange. I would really like to get that file, any help would be greatly appreciated. Thanks
StaticSample said:
I have the same USB issue...tried everything its has been a real pain in the ass . I am currently rooted with jf7, flashed cognition 2.1.3 voodoo enabled. The phone runs better then ever but I gotta have my USB just in case **** happens.
I would like to go back to stock unrooted before I exchange the phone . I searched around the forums for the recovery-update.zip mentioned above. I assume it was a private exchange. I would really like to get that file, any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
what I did was put design gears jf7 onto a microsd along with koush's recovery update.zip
you will need to remove your lag fix because it doesnt play well with clockwork if you dont have clockwork, all you really need is the recovery update .zip and the jf7 ota .zip if you can manually get into recovery you might not even need the recovery update.zip I had to use it because after I removed lag fix it would reinstall upon boot so I removed the lag fix and ran recovery update.zip upon the next boot( you will need to rename this update.zip and go into recovery by holding down power+both up and down vol until screen comes on then let go of power and continue to hold both up+down vol till you hit recovery then select to run the update. zip which is actually clockwork. then you can select to run the jf7 ota update . zip
that how I had to do it you might be able to skip the recovery . zip and just run the jf7 update.zip
be sure to rename it update.zip unless you use clockwork
just make sure you get the lagfix off before you run clockwork.
fell free to pm me if you need anymore help as Im not really good at explaining things sometimes
Hope this gets you back
ps you will need to move the files from micro sd to internal sd
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.
Alright. I have a Captivate on AT&T. It's bricked. It was one click rooted and had Perception 9.5 installed. I did the clockwork mod automatically when I rooted. I didn't use Odin. I dragged the Perception zip onto the SD. Restore mode via 3 button, install. I ran it first time no prob. I kept it for about 7 days, and I decided I wanted to try 10.1, and then if that didn't work, ROMkitchen custom.
So, I needed to go back to stock, right? I saw the Odin3 version, but on Designgear's thread, the Odin3 link was broken. So, I dl'ed the JH7_OTA.zip file, dragged to my SD, 3 button restore mode, install. WRONG! I now have a perma-AT&T screen. I don't wanna mess anything up, as I know just enough to get in trouble.
Please excuse me, as I'm sure it's been answered somewhere. I'm new from iPhone, and I know forum manners. I'm on my way out to my job, where I'll remain for the next 5 days. I only have access to an XP machine.
Please help if you can, and thanks in advance.
Find a link for a reupload of the Odin One Click, its in the thread. And then put your phone into download mode then flash.
ShredNasty said:
So, I needed to go back to stock, right? I saw the Odin3 version, but on Designgear's thread, the Odin3 link was broken. So, I dl'ed the JH7_OTA.zip file, dragged to my SD, 3 button restore mode, install. WRONG! I now have a perma-AT&T screen. I don't wanna mess anything up, as I know just enough to get in trouble.
Click to expand...
Click to collapse
No you really didn't need to go back to stock, but that's water under the bridge now. I don't know which firmware you need for your particular phone. For a batch 1009 and earlier this should be fine. For others you may need this. Personally, I'd stay away from the one-click which disables button combos on all newer builds.
K, well I feel dumb. I dl'ed Odin3, discovered "restore mode" and "download mode" aren't the same thing, put my phone in dl mode, clicked start on Odin, and was finished. Super simple back to stock.
Thaks for the help though guys. I appreciate it....
opcow said:
No you really didn't need to go back to stock, but that's water under the bridge now. I don't know which firmware you need for your particular phone. For a batch 1009 and earlier this should be fine. For others you may need this. Personally, I'd stay away from the one-click which disables button combos on all newer builds.
Click to expand...
Click to collapse
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
ShredNasty said:
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
Click to expand...
Click to collapse
If you manage to mess things up to the point you can't flash a custom ROM through recovery/CWM. Or if you need to exchange/return the phone for some reason.
ShredNasty said:
So, going back to stock isn't needed when changing ROMs? Under what circumstance do I need to flash stock?
Click to expand...
Click to collapse
In my opinion, only if nothing else works. I went a couple of months flashing mine dozens of times without using odin. I only flashed to stock prior to sending my phone back to Samsung to see if I could get the GPS fixed/improved.
Right on man. I appreciate it. I'm learning fast. Next time I flash, I'll just flash right over P10.1....
From what I've read since joining this community is that people tend to have mixed results/opinions about flashing to stock before changing ROMS. Personally, I always do... Each Captivate out there seems to have different quirks that do odd things from time to time, and are sometimes completely random. If you have no problem simply flashing a new ROM over what your using currently... by all means. If you have problems or Force Close issues.. try going back to stock first... All depends on what you are comfortable with..
I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)
Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD
Ok, thanks. I'll post an update tonight after I get back home.
SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM
HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"
HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!
So I can't even describe how many things I frigged up here. This is the basic way it all went down: I went to replace my boot image using a method I found from the guy that does the Mobile Tech Videos. His batch file pushed some stuff (I think it made changes to the file system?) and unfortunately I kept getting the garbage screen on startup instead of my logo. I was still able to boot into Fasty III v1.3 though.
I went looking for an alternate method and found one that dated back to January 2011. It involved a different push to the filesystem (I think) and a .PIT file. Well, then the phone soft-bricked. I was still able to get into download mode, so I flashed I896UXKH2-HOMEBINARY.tar.md5 which, if I recall, is the stock Rogers Gingerbread update. Now I'm stuck boot-looping between the Rogers splash screen and the Galaxy S animation. I'm not sure if it's because there are just way too many things going on in terms of bootloaders, kernels, file system changes and ROMs. Volume UP + Home + Power doesn't seem to get me into recovery mode, although I may be able to do that using adb... not sure. I had Boogs kernel on there, and Fasty III. Did they get wiped when I applied the KH2 tar?
I'm basically looking for the proper method to get this thing back to stock 2.3.3 so I can learn from my mistakes and, more importantly, get my phone working.
Heading to dinner, I'm hoping someone can link me to a guide so I can tackle this when I get back. If you have any questions about any more specifics I will try and answer when I get back home.
Thanks in advance!
So I've found a post on XDA for the Odin Master Wipe (One-Click)... I'd rather not lose my internal SD storage, does anyone know if there is a slightly more complex route to take that would restore all of the stock bootloaders, kernels and ROM?
I am going to say you might have messed up your Partition. You need to find what ever is a "stock" PIT for your phone. I can assume the I897's should work but I don't know. That garbage screen in the beginning seems like either the image was corrupted or you messed up on the process. Either way I would recommend either a 1 click to JF6 (if your phone like those) or use that same KH2.tar with a suitable PIT assuming KH2 is froyo or eclair. If that KH2 is GB try a froyo first, fix your phone then worry about GB. I use a i897 so I could be way off on this.
prbassplayer said:
I am going to say you might have messed up your Partition. You need to find what ever is a "stock" PIT for your phone. I can assume the I897's should work but I don't know. That garbage screen in the beginning seems like either the image was corrupted or you messed up on the process. Either way I would recommend either a 1 click to JF6 (if your phone like those) or use that same KH2.tar with a suitable PIT assuming KH2 is froyo or eclair. If that KH2 is GB try a froyo first, fix your phone then worry about GB. I use a i897 so I could be way off on this.
Click to expand...
Click to collapse
The I897 and I896 are, as far as I am aware, virtually identical. I'll try to find a stock partition file for Gingerbread I896/7. I just flashed the device with the stock 2.3.4 file found in this thread, http://forum.xda-developers.com/showthread.php?t=1232703 but I'm guessing you might be right about having frigged up the partitions. Thanks.
armadadrive said:
The I897 and I896 are, as far as I am aware, virtually identical. I'll try to find a stock partition file for Gingerbread I896/7. I just flashed the device with the stock 2.3.4 file found in this thread, http://forum.xda-developers.com/showthread.php?t=1232703 but I'm guessing you might be right about having frigged up the partitions. Thanks.
Click to expand...
Click to collapse
Well, I'm boned. I flashed the PIT file and then the device wouldn't even power on. So I finally frigged my way into download mode again and now I'm trying to apply the Odin One-Click program with the Master Wipe. Any other suggestions would be grand.
And now, it seems that Odin One-Click is hanging at the Set PIT file... command. It's been at least 10 minutes. This phone is still capable of download mode, I must be able to restore it!
Dammit.
Right click the Odin and run as administrator first then connect in download mode. Be sure to hook up your usb end to the back of the computer or if laptop- to the first port. And you may need to reboot your computer just cause.
^ What he said. DO NOT try restoring partitions with a package with bootloaders, reduce risk to hard brick
4-2ndtwin said:
Right click the Odin and run as administrator first then connect in download mode. Be sure to hook up your usb end to the back of the computer or if laptop- to the first port. And you may need to reboot your computer just cause.
Click to expand...
Click to collapse
Any attempt to get into recovery or download now has left me with
RST_STAT = 0x1
PWIC = 0x3c
...
etc. I'm sure this is a screen that is not a good sign.
What about pulling battery and then trying to get into download mode.
If that does not work, then u need a Jig.
Don't worry, I have seen that screen or one similar on my phone as well. But a jig got me into download.
Will ur phone power on at all ?
Well, six lines of red hex status codes. This can't be good.
At this point I can't seem to get it to do anything but the six lines of code. That seems to pop up with the typical recovery combo. I don't have a jig, not exactly sure what that is but at this point I'm looking for any suggestions to get me into Download mode. Pull battery, sim, leave them in, whatever might help. This is the most boned I've ever been with an Android phone and unfortunately I need to rely on your experiences in the matter because I am not ready to give up on this phone. It's still a challenge and I love that, but this is also my primary mode of communication and I am the primary contact for my band.
This post will show you how to make a Jig... [HOWTO] *Layman's iGo Jig* [Solderless]
Thankfully, I just got 'er back into download mode... I'll let you know.
Unbrickable mod doesn't cost that much . I think 30-40 bucks....and if your handy you can do it yourself ., to prevent hadlrdbricks
Sent from my SAMSUNG-SGH-I897 using XDA App
Odin One-Click just seems to hang now...It's now sitting at File Analysis. I am happy that Download Mode is still available, but I'm really unsure of what to do. I'm on a laptop, Dell StudioXPS laptop with Vista 32-bit, I ran ODIN3Excution v1.00 as administrator but I'm still getting nothing. I also moved the cable to the USB port closest to me.
True but those $30-$40 + shipping can reach close to $100 on my end, dont know for someone in Canada.
Do you have spare cable? Wich ODIN 1 click you using ?
prbassplayer said:
True but those $30-$40 + shipping can reach close to $100 on my end, dont know for someone in Canada.
Do you have spare cable? Wich ODIN 1 click you using ?
Click to expand...
Click to collapse
Yeah, I have a spare cable. I don't think there is anything wrong with the cable, I think my tinkering has progressively made the situation worse. I am not going to spend money on this, there IS a process I can follow I'm sure. I HAVE Download mode capability, and a working computer. The Odin One-Click I'm using is showing Odin2Excution v1.00 in the title bar.
What did I do? **** up the partition table? So the bootloader doesn't know where to find the ROM? How can I undo this mess simply?
What I find most ironic is that I've successfully flashed kernels and roms to the phone, but the minute that I go and try to change the boot image, I friggin' brick the phone.
Go to dev section on one of the stikies and download Cezar's bootloaderless JF6 and give it a go.