Hi guys,
A little over my head here, I am a mechanical engineer major and pretty fluent with computers until it gets to programming. I am trying to set up a nice theme on my HTC Droid but ran in to problems with busybox; which is required for Metamorph to work as I understand.
I see the code is available for download but I am not sure how to go about compiling or using it after. Could someone point me to a guide I missed, perhaps on this very forum, or just give me some quick pointers. The goal is to make the phone look nice; not gain a complete understanding of whats involved. Which leads me to believe some quick pointers would be the most efficient solution to my problem.
I have already upgraded to Android 2.1 and gained root access using guides at the theunlockr site.
I installed Metamorph and andExplorer but Metamorph just hangs there indefinitely on load; at which point I realized I need busybox and that's where I ran in to trouble.
Thank you for your time
The themes here arent for your device, you have to try the droid forums or alldroid or modmymomto too.
"When theres no limit to what Droid gets, theres no limit to what Droid Does."
Well the theme I want to install is Buuf, and I have seen it on my device so clearly it possible. It's also for sale on android market so clearly it can function on it. However I don't want to pay for the app they made that automates the installation of it when I went through all the trouble of root breaking the phone and putting 2.1 on it etc
And searching for them here brings up all kinds of posts that just... blow my mind.
Background:
I rooted my NC a couple days ago using Autonooter 3.0 for 1.1
My questions are:
1. Is there much of a difference between this and Honeycomb? I mean i'm aware of visual differences but does one run better or have any advantages?
2. What are all the different variations on the developer page? Not clockwork recovery but if you click over the entire first page is just a long list of different versions/different ways to root. Any of those better than the other? Or is it just 20 different ways of accomplishing the same thing.
3. Do any of those versions support web video? I know I now have a youtube app but I still can't watch videos on any other sites.
4. Why don't all apps show up in the marketplace? Is there a workaround for this? For example the first time I rooted from 1.0.1 I could access Angry Birds. Now the only one that shows up is the seasonal one...
5. If I go ahead and install the newest version of Froyo (6.6) will I have access to the Market from the start or am I going to have to go into command line and all that other stuff? I'm comfortable with the flashing and installing but as soon as you get into that I might as well be reading Russian...
I know I have more questions but I can't think of them currently. Any and all help is much appreciated.
jrob9583 said:
And searching for them here brings up all kinds of posts that just... blow my mind.
Background:
I rooted my NC a couple days ago using Autonooter 3.0 for 1.1
My questions are:
1. Is there much of a difference between this and Honeycomb? I mean i'm aware of visual differences but does one run better or have any advantages?
2. What are all the different variations on the developer page? Not clockwork recovery but if you click over the entire first page is just a long list of different versions/different ways to root. Any of those better than the other? Or is it just 20 different ways of accomplishing the same thing.
3. Do any of those versions support web video? I know I now have a youtube app but I still can't watch videos on any other sites.
4. Why don't all apps show up in the marketplace? Is there a workaround for this? For example the first time I rooted from 1.0.1 I could access Angry Birds. Now the only one that shows up is the seasonal one...
5. If I go ahead and install the newest version of Froyo (6.6) will I have access to the Market from the start or am I going to have to go into command line and all that other stuff? I'm comfortable with the flashing and installing but as soon as you get into that I might as well be reading Russian...
I know I have more questions but I can't think of them currently. Any and all help is much appreciated.
Click to expand...
Click to collapse
I won't be too helpful here but since you have no replies yet...
1. Honeycomb is more functional for tablet devices, it has the notification bar on the bottom with back and menu buttons by default, it has multipane apps and new widgets and other new functions.
2. I am not sure what you are talking about here.
3. Froyo and newer support web video via flash player 10. If you can get it installed, some people have difficulties.
4. It has to do with your device ID. Google for some reason can block apps that they don't think you need on your particular device. It's good for somethings because you don't want to see GPS centric apps on a device with no GPS but it blocks lots of useful apps too. There is a way to fix it by tricking the market into thinking you have a phone like DROID. Not sure why devs don't do it thought.
5. Rom makers aren't putting the market into their roms. Google has a problem with it and has sent Cease and Desist letters to people who do it. You can install the market afterwards.
I finally bit the bullet and updated my firmware to TNT 4.25. and ClockworkMod. Thank you's to all the devs who made it possible. Now for the very first time, I can access the Market as I do on my Droid.
But the new Market site, still shows only my phone as a device, and I cannot seem to add my gTab. I have read about changing the build file. Is this the way to go? Is anyone else having this problem? I should not be greedy. I am just overjoyed that I finally can get to the market in any way.
BTW, for anyone contemplating going over to the TNT versions here, all I can say is it worked for me. Thanks to all the people involved.
Have you tried accessing the Android Market website directly from your tablet and see if allows you to install apps?
I've also noticed that I'm only able to see my G Tablet on the website when my tablet is online.
Yes!
Thanks for the suggestion. The first time I had tried it, before I posted this thread, I did not see the gtablet. However, being persistent, I tried to get on again, a few hrs after posting, thinking I had nothing to lose. And lo and behold, it was there... I am overjoyed. Thanks everyone.
Hi all,
I've just rooted my Nook Simple Touch and am running the 1337 ROM. Everything's run smoothly so far, with the exception of one thing: my reader app (Mantano) won't sync with my cloud account.
I've been using Mantano Cloud for a few years now, and it's indispensable to my reading habits because it syncs across all of my devices. As such, switching to another service is not an option; I need to find a way to get this to work with my account.
When I first tried it, the sync made as far as "Processing book metadatas (75%)," but would go no further. I tried deleting the account and resyncing, but then it wouldn't even get that far (instead hanging at the first step, "Downloading changes from cloud"). As an experiment, I tried making a trial account and syncing one book, which worked. Thinking that perhaps I was trying to sync too much at once, I cleaned out my Cloud library (cutting from ~150 books down to ~20 books, and from ~1800 annotations to none). Still the Nook was unable to sync with my account (I gave it a few hours just to be sure that it wasn't simply an impatience issue).
I am wondering if maybe the issue is caused by trying to sync books from the newer version of Mantano I use on my phone (2.5) to the earlier version (2.2.12) that's compatible with Android 2.1, but I'm not sure.
As this is clearly app-specific, I have emailed the developers to ask their advice, but I know that these boards are often a much more valuable resource. Do you guys have any suggestions on what the issue might be, or possible solutions I could try that would allow me to sync my library between these devices?
Thanks in advance for any help you can provide!
chelce said:
[...]
Click to expand...
Click to collapse
Hello there, chelce,
First off, thank you for using my/our (it's @yattaro's and mine) 1337 ROM - we hope you're enjoying it!
Now, onto your issue. This is all pure speculation, as I don't and have never used Mantano myself, but I do have an idea of what your problem might be.
What I'm guessing is that the older version of Mantano installed on your Nook for some reason is incompatible with your specific Mantano account because of how it's already hooked up to a mobile device with the latest version of the Mantano app installed. The reason I think this is because of how you guaranteed that the old version of the Mantano app will work properly, albeit with a different account, and because of how I'll bet you didn't connect your phone to the new, temporary account.
To test this theory, first, please cut the Mantana system .apk from /data/app and paste it onto your external sdcard (/sdcard) using either ADB, an FTP server or a root-enabled file explorer. Then, re-install Mantano by tapping on the .apk you just moved from /data/app to /sdcard.
Now, please temporarily disconnect your phone from your Mantano account.
Finally, go through the setup/sign in process of Mantano on your Nook and see if it connects.
ИΘΘK¡€ -
Thanks for your quick reply! I am definitely enjoying the ROM, and will be happy when I can get Mantano working so I can actually start reading on my Nook.
I tried your suggestion, and unfortunately it didn't work. It was a good thought though. I also tried syncing my phone to the trial account that my NST was able to sync to, and then syncing my NST to it again. It worked. It seems to be my specific account, but I'm not sure how to rectify this short of cancelling my account and starting over again (which I would rather not do because it's a paid account).
Any thoughts? Conversely, an update to Android 2.3 would also solve the issue, but I'm not sure what the timeline is on developing for that (and unfortunately I don't know enough to be able to help).
Thanks again - always nice to be able to come to a community for support!
Updated Issue
In the hopes of finding a solution to a problem that is still happening, here is an update to the problem I mentioned in my previous posts:
I decided to bite the bullet and just sync to a different account. It was a minor hassle/expense to set it up, and my Nook was working fine for a week (syncing posed no problems). Then, tonight, I synchronized a file from my phone to the cloud, and when I tried to synchronize my NST to download the file to it, it got stuck on "Processing book metadatas (88%)." Basically, I somehow got stuck in the same dead end as before.
I unsynchronized the file on my phone, but my NST is still getting stuck at 88% during the sync.
I am at a loss for how to proceed. I cleared the cache (both of the app and the device), and had already tried (un/re)installing the last time this happened, to no avail (first the app, then everything after a factory reset, and finally the whole ROM).
Any thoughts or suggestions? Mantano still hasn't gotten back to me, so as of right now I'm stalled.
Thanks!
chelce said:
In the hopes of finding a solution to a problem that is still happening, here is an update to the problem I mentioned in my previous posts:
I decided to bite the bullet and just sync to a different account. It was a minor hassle/expense to set it up, and my Nook was working fine for a week (syncing posed no problems). Then, tonight, I synchronized a file from my phone to the cloud, and when I tried to synchronize my NST to download the file to it, it got stuck on "Processing book metadatas (88%)." Basically, I somehow got stuck in the same dead end as before.
I unsynchronized the file on my phone, but my NST is still getting stuck at 88% during the sync.
I am at a loss for how to proceed. I cleared the cache (both of the app and the device), and had already tried (un/re)installing the last time this happened, to no avail (first the app, then everything after a factory reset, and finally the whole ROM).
Any thoughts or suggestions? Mantano still hasn't gotten back to me, so as of right now I'm stalled.
Thanks!
Click to expand...
Click to collapse
Sad to say, I honestly can't imagine exactly what your problem is, nor how to fix it. I bet it's a nug (a nook bug), which is what I call those small (or not so small), inexplicable issues Nook Touches often have that don't seem to have a fix.
I'm very sorry I couldn't be of more assistance.
chelce said:
In the hopes of finding a solution to a problem that is still
Any thoughts or suggestions? Mantano still hasn't gotten back to me, so as of right now I'm stalled.
Thanks!
Click to expand...
Click to collapse
Hello Chelce. Did you solve the problem? Did the guys at Mantano answer?
I have found the same problems as you.
I use Mantano PRO 2.2 in a rooted NST and PRO 2.5 on a number of other devices. I sync them all through Mantano Cloud (paid) service.
As long as I do not sync PDFs, there are no problems. But once a PDF creates a "faulty/unsyncable" entry into the highlights/notes DB, the NST will fail at syncing.
A pitty, since Mantano is hands down the best ebook service for academic work, where we"indulge" in extensive annotations, and where we need those notes to be easily stored, catalogued, and shared.
nicvel said:
Hello Chelce. Did you solve the problem? Did the guys at Mantano answer?
I have found the same problems as you.
I use Mantano PRO 2.2 in a rooted NST and PRO 2.5 on a number of other devices. I sync them all through Mantano Cloud (paid) service.
As long as I do not sync PDFs, there are no problems. But once a PDF creates a "faulty/unsyncable" entry into the highlights/notes DB, the NST will fail at syncing.
A pitty, since Mantano is hands down the best ebook service for academic work, where we"indulge" in extensive annotations, and where we need those notes to be easily stored, catalogued, and shared.
Click to expand...
Click to collapse
I'm going out on a limb here but I have one more thing for you to try. Similar problems have occurred recently with the Kindle app and have long been a problem with Google Books. User @tshoulihane tried updating the security certificates on the NST (some of which have expired) and that allowed both the Kindle and Google Books apps to connect properly and sync content. The thread is here. All I did was download his file and replace the original cacerts.bks (saved old one just in case). Then reboot.
I will add 'USERtrust' to my updated cacerts.bks - it occurs to me that it isn't just having root certificates expire on the nook that cause problems, some websites will potentially migrate their certification path over time. Not sure I can fit it in before Friday though...
Hello All,
Not having the availability of a PC at the moment and wanting to edit apks had me thinking if it was possible to run Apktool straight from my Nexus 6p itself. After some research I found some information showing that it is indeed possible (at least it was), but nothing seems to work at the moment, rather nothing seems to be up to date.
I would like some insight on the matter if anyone has any or if anyone can point me to and updated version for Android Nougat.
Here are two threads from xda showing that it indeed it's possible, but not updated. Any help is appreciated thanks
http://forum.xda-developers.com/galaxy-core/general/how-to-decompile-recompile-apk-using-t2818875/
http://forum.xda-developers.com/showthread.php?t=2488697&page=8