Related
I know of this one:
http://htcpedia.com/news/case-cover-htc-droid-incredible-extended-batteryc.html
but I'm finding myself wanting a green one.. long shot I know.
If anyone has any other places that sell cases for the HTC extended let me know, I'm not looking for the 3500 extended cases.
Haha, I just cut out a regular silicone case and it works awesome for me. I don't know of any others beside that one.
Sent from my ADR6300 using XDA App
You cut it out yourself? Dora it look ok. Pic?
Sent from my ADR6300 using XDA App
Well, I kind of rushed it and it could be a lot cleaner, I just did it with an Xacto knife that wasn't exactly the sharpest, so it had some wobble in the cut. Also, silicone is kind of hard to trim flash off of. I attached a picture of it, though it's just the back with the case on it since my only camera right now is my phone, haha.
I'm going to buy a hard plastic case and cut and sand it with my Dremel. That one will look much, much nicer. I'm fairly certain you'd be able to do it with any regular Incredible case.
If you look at the regular cover and the extended cover, the only part that sticks out is the highest surface on the back. Most (if not all) cases "hug" this plateau. That's all you have to remove. Check out the 2nd pic for clarification. Like I said, so long as the case has this rise there, it'll be really easy to cut, the lines are already there for you!
Hope this helps.
wow not too shabby for being rushed, looks nice
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
skateboard grip tape.
There are leather back covers on ebay but without NFC. I can do without NFC, so I'm planning to buy one.
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
Try a full body skin. I had a carbon fiber one that added some grip, but removed it. ...I didn't like the carbon fiber around the edges of the phone. I'm currently using the Spigen Matte full body skin. It adds some grip on my opinion, butsome may say it didn't add enough. Just my pinion of course.
Sent from my SCH-I605 using Tapatalk 2
I had used plastidip on my back cover to make it matte black and add grip, it worked well but it's just not durable enough, mine was peeling of within a few days
Sent from my GT-N7100 using xda app-developers app
xtremeguard do front and rear screen protectors.
if you buy 2 or more, you can use the code 85off2 to get 85% off. quite a nice sticky feel too it when used on the battery door and using a bumper case.
I just bought one of those skins, they have one in carbon aand brushed steel from ebay for around 6bucks
egrips...every time
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
First thing I do to any new phone (or laptop) is throw a couple egrip strips on the back... incredible traction...nothing slimmer...never need a case cause it doesnt slip out of your hands!
www.egrips.com
until i found a case i liked, i applied a generic, large, clear Zagg screen protector to the battery cover. i had to use 2 pieces and it was not an exact fit, but there was enough coverage to make it less slippery.
Try using flygrip
Just Google and YouTube "flygrip galaxy note 2".
I've been using this thing for almost a week now on my note 2. It's amazing.
flygrip is to big and doesn't allow the use of a case if needed. Great idea but dumb product for $30
Spray-on truck bedliner haha
Sent from my SGH-T889 using xda app-developers app
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
downtavern said:
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
Click to expand...
Click to collapse
Here you go!
http://www.lowes.com/pd_230659-6115...ip&pl=1¤tURL=?Ntt=plasti+dip&facetInfo=
I wonder how well this color will match the orange flip cover?
http://www.lowes.com/pd_416844-6115...ip&pl=1¤tURL=?Ntt=plasti+dip&facetInfo=
Does this type of spray grip tend to peel or scale easily with everyday usage? I was thinking of something to add more grip to my otterbox commuter case which tends to be on the slippery side. Is it easily removeable if needed and does it attract lint/dirt/etc?
downtavern said:
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
Click to expand...
Click to collapse
You can try some gaffers tape, it will make it ugly though, used it on my nikon cameras before felt pretty nice.
I have one of these and I love it.
http://m.youtube.com/#/watch?v=C3hav9esA4U&desktop_uri=/watch?v=C3hav9esA4U
Sent from my SCH-I605 using Tapatalk 2
Lol ive used Plast dip on everything, including my car. Not sure how I feel about spraying my 700 device though. I guess it wouldn't hurt, because they do come off easily
Sent from my SGH-T889 using Tapatalk 2
just get a good case and dont be cheap
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
use stickum
I saw earlier that this case I recently got looks very similar to the SUPCASE hybrid bumper case posted here: http://forum.xda-developers.com/showthread.php?t=2706539
Thought I'd post some pictures then and a quick review, since this case is a few bucks cheaper than the SUPCASE after shipping costs and everything, so you guys can get a deal on a preeeeeetty good case. All the cut-outs are where they need to be, the bumper TPU looks glossier than most TPU that are matte, and the HTC One's back looks slick as ever in the clear back window. Can't ask for much more in a case under ten bucks.
http://www.amazon.com/Exact-Prism-Slim-Fit-Transparent-Clear/dp/B00JAR24SU
good pics man, might pick that up, i need a clear case super bad!
Does this phone cover the ir blaster? Thinking I'll buy it but I saw no pictures of the top
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Gja88 said:
Does this phone cover the ir blaster? Thinking I'll buy it but I saw no pictures of the top
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ir blaster works with case on.
Sent from my LG-V500 using xda app-developers app
I just recieved this case in blue. Looks good. Hope it doesnt scratch the back if dust gets under. The top and bottom fit a little loose but nothing major.
Sent from my LG-V500 using xda app-developers app
How are the buttons on this case?
WatermelonMan said:
How are the buttons on this case?
Click to expand...
Click to collapse
The volume rocker buttons are raised and easy to push. The power button is cut out.
HTC One M8
Just got this case. So far my favorite case. I have the Hyperion, the cimo, the dot view but so far this is my favorite.
I got this case as well, in black. The top and bottom lips are loose like someone mentioned and quite a bit of dust gets under it . Overall the case looks pretty sleek and the clear back definitely shows off the nice metallic look. However, I feel that the case adds quite a bit of weight to the phone. Maybe I'm just used to the cruzerlite bugdroid cases as I've had on my older phones. Does anyone have both the exact prism and the cruzerlite cases and able to comment on their thoughts? :laugh:
Ah, thanks for the review. I have the Supcase one and it also has the problem with the top and bottom lips being a little loose. I wonder if these are all the same cases with just different logos slapped on the back? I dunno... I also ordered the amCase deal, on it's way. Curious to see if that one's any better.
aimfire72 said:
Ah, thanks for the review. I have the Supcase one and it also has the problem with the top and bottom lips being a little loose. I wonder if these are all the same cases with just different logos slapped on the back? I dunno... I also ordered the amCase deal, on it's way. Curious to see if that one's any better.
Click to expand...
Click to collapse
I don't think anyone will be better than the other.. If you ask me they are probably all made in the same plant(or few plants) just some are stamped with the individual company logo and some are not. There are also a bunch of the same type of case on ebay with no brand name. I mean a lot of these cases that these companies brand are just generic cases from China.
Sent from my HTC One_M8 using Tapatalk
graffixnyc said:
I don't think anyone will be better than the other.. If you ask me they are probably all made in the same plant(or few plants) just some are stamped with the individual company logo and some are not. There are also a bunch of the same type of case on ebay with no brand name. I mean a lot of these cases that these companies brand are just generic cases from China.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
My cheapo amCase came in today... It's basically the same design as all the others, but the back is a matte frosted plastic which actually makes the phone more awkward to hold, it's a little slippery. Basically the same exact tpu bumper, but mine has slightly more sag at the top and bottom lips. I like the way the glossy Supcase feels... will keep the amCase as a $2 spare, lol.
Just picked one up... Definitely like how it shows off my Amber Gold while protecting my device. I don't like how hard it is to get the phone in and out of the case.
Sent From My HTC One (M8)
I have this same case in the same color. My only issue with this case is the volume control buttons are a little stiff. I hope that will fix itself when the case gets broken-in. I love how this case shows off the body of the M8 through the clear back.
I like the quality of the side's. Would love an all matte case. All I've found have a matte back with glossy sides.
Sent From My HTC One (M8)
Rydah805 said:
I like the quality of the side's. Would love an all matte case. All I've found have a matte back with glossy sides.
Sent From My HTC One (M8)
Click to expand...
Click to collapse
I've seen one by Griffin, has the matte sides, but a glossy back, lol. Saw it at an unofficial Verizon store, was $24.99, which is obviously a lot for a case like this. The sales guy opened it up for me, the matte sides were actually kind of slippery, no grip to them.
Nice review, thanks. Just worried as people seem to complain about the gap on the top and bottom. Luckily they're cheap so no big loss if I didnt like it
In your opinion, this the best clear case out there?
I can't really say, as I haven't tried all the cases. However, evidence points to this case being generic and is identical to clear cases from other brands. The Exact Prism case is at a good price though, so I would wholly recommend it, despite the looser fit.
Anyone have the white/clear one? I was wondering if the white stains