Related
Does any manufacturer make a "bumper"-style case for the Incredible? I'm looking for something like the iPhone bumper cases, where the case only wraps around the four side edges of the phone, leaving the back exposed.
I'm really just looking for something to cover the sides and corners - has anybody seen anything like this?
no, and why would you only want it covering the sides?
I have the white battery cover, and I like the look of it, but I want to protect the corners against drops.
Doesn't verizon still sell the clear plastic case that snaps on? Its what I've got on mine. It doesn't obstruct the viewing of the back, and it protects the silver on the HTC logo too (I've heard that'll eventually come off and become black).
Sent from my [mute] Droid Incredible running Myn's Warm Two Point Two RLS5.3.
I havent seen many cases for the incred
Sent from my ADR6300 using XDA App
ebay has hundreds
Or you could find a cheap case and take a dremel to it.
Look up this case I think you might like it. "Speck Candyshell HTC Incredible"
Boxwave makes a clear TPU style flexible case, like the Amzer/VZW cases. Link below....
http://www.boxwave.com/products/diamondcrystalslip/htc-incredible-diamond-crystal-slip-case_3909.htm
Griffin reveal will give you exactly what you want.
http://www.youtube.com/watch?v=vAV1ApFOQ0I
Yes, I know - I made that video and that thread
What's wrong with your reveal case?
Sent from my ADR6300 using XDA App
Nothing! This thread was made BEFORE I got the Reveal case, made the other thread, or filmed that video. That was my solution.
I'm looking for an hard cover with NO rubber o any other grippy parts... i've possibly found one, but i'd rather have a bit of choice and/or feedback.
Pretty much this is my point: my pockets are big enough for the tab and a cover, i also need a cover. And i do have one... that is made of one of those rubber materials. Works awesome but it makes putting the tab in the pocket (and exctracting it) a long and slow process, one that actually worked with my iPhone because it was such a small device, but not on the tab for obvious reasons
So. Let me point out a few things that this cover shouldn't have:
- grippy material
- transparent material (looks good for a few days, then gets yellow-ish and you see the dirt lodged between the cover and the gadget)
- flashy colors, the tab is already very much an eye grabber without extra help
- bulky. If it's foldable if falls into the bulky category almost surely, remember it has to fit in my pocket
- pouch. That's exactly the kind of thing i forget once the tab is outside it.
Also, leather. I'm very skeptical about leather..... but i'm considering it.
Oh, and you know.... no matter what, it'd need to be shipped to Italy. Amazon.uk would be preferred (looked there, but no description is clear enough about the kind of cover).
Anyway, this is my find: http://cgi.ebay.it/CUSTODIA-COVER-M...t=Accessori_per_Cellulari&hash=item2c5b379a1a
looks fairly nice and meets all my requests, however it's not shown with the tab in it, so i can't tell if it's bulky or what.
Thanks in advance, worst case scenario i pointed out a cover that might interest somebody
Well, if you get a hard plastic one its going to crack if you drop your device.
I have a black one of these and its been perfect so far, it clear, but its black, so its not going to fade, ive had it for 6mths now. Its not grippy per say, but it dose have some friction, you dont want a slippy device do you? It only adds around 3mm to the tab
http://www.ebay.com.au/itm/SOFT-TPU...AU_MobilePhoneAccessories&hash=item1e62d7b957
Uhm. Slippy dosen't really bother me, i hold with two hands every gadget, even an Xperia X10 mini pro, and my grip is pretty good but you do have a point.
Turns out i've never seen/touched anything made with TPU, and i've had experience only with rubber (eww, avoid at all costs) and silicone. This is what i have at the moment...
By any chance do you know if TPU offers more or less grip than silicone? Solner or later i'll have to find out if i like the material, i guess.
Also, i think i've seen the case you linked on amazon.co.uk and that is a good thing.
Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.
GldRush98 said:
Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.
Click to expand...
Click to collapse
Wow! Very good candidate, but also really expensive... 35$ + 15 + possible customs fees scares me. But great find, even looks good. This one requires some thinking due to the price, but seems worth considering.
I like where this thread is going
Sent from my GT-P1000 using Tapatalk
No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5
natious said:
No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5
Click to expand...
Click to collapse
Still it's better than nothing, and that's what's going to have the tab if i can't comfortably fit it in my pocket
However i put some thought into this thing, and i might just end up purchasing the one i found and a cheap TPU one, to see how it is.
And still open to suggestions anyway
You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2
Nice!!!
Sent from my GT-P1000 using XDA App
what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94
R317DY said:
what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94
Click to expand...
Click to collapse
Interesting, but size matters. That sort of thing would completely ruin the portability of the thing
Sent from my Transformer TF101 using Tapatalk
jesand83 said:
You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2
Click to expand...
Click to collapse
I own one of these and the lip that protrudes around the screen does grip in pockets.
This is not the droid case you are looking for. *waves hand around like obi-wan*
Sent from my SCH-I800 using XDA App
I was just surfing amazon and found a case available that i hadn't seen before. It's by Devicewear, called The Ridge. I can't link to it as it's my first post, though i thought i'd give everyone a heads up.
Seems like an awesome case, with everything that I was looking for:
Slim profile, hard backing, folio cover, auto sleep/start, microfiber lining, decent price, available.
I ordered it and should be arriving tomorrow, i'll try to take some pics and have a short review soon if people are interested. I already have the poetic hardback, which is nice, but this one seems to be the perfect case for me.
That looks pretty nice, looking forward to your review.
Just registered and first post. Free advertisement?
Looks like a sleek case. How much did you spend?
Sent from my Nexus 7 using Tapatalk 2
All the reviews on Amazon by users with just one review and all posted within a few days. Lots of similarity in text (it snaps in!) For what it's worth.
nm8 said:
Just registered and first post. Free advertisement?
Click to expand...
Click to collapse
Hahaha no it's just a coincidence this is my first post. Now that I read back on it, it does sound like i'm advertising lol. I've been perusing the posts on here for a little and hadn't seen anything on this particular case.
ticktak said:
Looks like a sleek case. How much did you spend?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It was $25, which I didn't think was too bad, it seems like a decent case.
the case looks nice I'll be waiting to hear what you think when you receive it
Looks very nice.
The thing I don't like are the two things on the front flap to keep closed.
Decent price.
I really like this - wish it came in more colors
Looks nice, very convenient marketing scheme as well.
GatorsUF said:
Looks nice, very convenient marketing scheme as well.
Click to expand...
Click to collapse
Totally is a good marketing scheme. Made me realize that this case is in the market and I bought it because it looks like the best one for my needs available.
I looked up a review of their iPad case and they check out:
http://www.youtube.com/watch?v=rOsH-owEJv0
Quick Review and pics
Wow, I had no idea that me posting that would make it seem like I'm schilling for them. Not sure what I can say to have you guys believe otherwise, but oh well. I'm not affiliated with them in any sense.
Anyways, for those that would care, it came in today (yay Amazon next-day shipping!) and I took some ****ty cell-phone pics and have some initial impressions.
The Good:
Very slim profile, doesn't add much bulk at all.
While not real, the "vegan leather" does feel pretty good and grippy in the hand. Definitely better than the pu leather stuff.
The inner lining of the front cover has some sort of rubbery, felt-ish material that seems like it will protect pretty well against scratches n such.
All buttons, ports and speakers are well-exposed and have easy access.
I love the combo of hard case to protect the back and cover for the front.
Auto sleep/awake seems to work pretty well.
The Nexus does fit pretty snugly in the case, doesn't seem like it will pop out unless coaxed.
The little ridges in the front cover line up with a ridge on the inside edge of the case to prop it up at multiple angles. It seems really sturdy, and a lot less bulky than the giant deep ridges i have in my poetic hardback.
It also flips over for a pretty good typing angle.
The not so good:
The PU backing seems a little flimsy, I've never had one of these hard cases before so I'm not sure how sturdy they normally are, but it seems like it flexes kind of easily.
While the clamps on the top and bottom edges of the cover hold it in place pretty well, they are definitely pretty flimsy and don't "snap" like you would like them to. I can also see them getting in the way, it would have been nice if they would have found another way to keep the cover shut against the tablet, like a magnet or a clamp on the right side. At least it stays in place though.
Because the case is synthetic leather, it does have a chemical smell to it, which i'm sure will dissipate over time.
Overall, I'm pretty impressed with the case. I really wish the plastic was a bit sturdier, the poetic slimline from the pictures I have seen looks a little thicker. I really do like it, and I'm happy I made the purchase. If anybody wants more pics let me know and I'll do what I can.
Looks like the clips would get in the way if the front flap was folded all the way back like a book and then set on a flat surface. Correct?
Sent from my Nexus 7 using xda premium
Looks nice, but the $57 shipping tag to Australia is bloody steep. Although you have a regular $11 mail service to here its not tracked, and after having 6 things lost in the post over the years I can't trust it.
Sent from my Nexus 7 using Tapatalk 2
$57 to Australia? I'll look elsewhere for a case.
Sent from my Nexus 7 using XDA Premium HD app
kam14132 said:
Looks like the clips would get in the way if the front flap was folded all the way back like a book and then set on a flat surface. Correct?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
They are noticable, but don't get in the way nearly as much as I would have thought. I have noticed, however, that with the back folded all the way back the magnet is strong enough to put the tablet back to sleep, so I have to put a finger in between to keep it on. Definitely annoying.
This is definitely one of the better looking cases for the N7. Its a little pricey though.
Nice review.
Sent from my Nexus 7 using XDA Premium App
DrBunsen said:
I have noticed, however, that with the back folded all the way back the magnet is strong enough to put the tablet back to sleep, so I have to put a finger in between to keep it on. Definitely annoying.
Click to expand...
Click to collapse
Looks like a great case except for this point, definitely a problem. I wonder if it's possible to take out the magnet somehow, I don't even care about the wake/sleep function much.
DrBunsen said:
While the clamps on the top and bottom edges of the cover hold it in place pretty well, they are definitely pretty flimsy and don't "snap" like you would like them to. I can also see them getting in the way, it would have been nice if they would have found another way to keep the cover shut against the tablet, like a magnet or a clamp on the right side. At least it stays in place though.
Click to expand...
Click to collapse
Is it possible to fold it in such a way that the clamps are facing up the back case (when folded back for reading), so that maybe they can snap onto the PU backing?
I guess it's a bit hard to explain but since the front cover extends all the way to the middle of the back case, is it possible to fold that part to an opposite direction (instead of folding the usual line along on the left edge of the case)
If this works, maybe it can avoid the problem you mentioned in another post, about the magnet being too strong and put the device to sleep when the front is folded back.
xthaox said:
Is it possible to fold it in such a way that the clamps are facing up the back case (when folded back for reading), so that maybe they can snap onto the PU backing?
I guess it's a bit hard to explain but since the front cover extends all the way to the middle of the back case, is it possible to fold that part to an opposite direction (instead of folding the usual line along on the left edge of the case)
If this works, maybe it can avoid the problem you mentioned in another post, about the magnet being too strong and put the device to sleep when the front is folded back.
Click to expand...
Click to collapse
I don't think there's any way you can get the clips to face that direction, but I have found that if you keep the cover folded along the natural crease, forming a little triangle, I've been able to avoid the problem as well as giving you a nice little grip to hold onto. Thus far I am really enjoying the case. Although now part of me wants one of the Portenzo or Treegloo cases, they look really nice.
I've got the Case-Mate Tough Case and even though it has the little bump pattern on it it's way too slippery... it's not rubbery feeling like it looks in the pictures...
And I've spent the better part of a week reading reviews and searching and can't find a good answer... So what's the best case for GRIP? Preferably it should give decent protection, not be too big (I don't want something like the huge Otterbox or Seidio Active) and have a lip on the front to protect the screen.. other than that I just want it to actually be GRIPPY!!! This phone is huge (it's awesome, but huge) and I really need some grippiness on the back so that I can one-hand it... I've looked at the Aegis, Ballistic, UAG and others but there are mixed reviews as to the actual feel of the outside. I want something that I can lay it in my hand at a slight angle and it won't just slide off... The Case-Mate really checks all the boxes except for the fact that it's just so dang slippery!!
So if you've personally got a case/used one that you find exhibits exceptional "grippability" then toss a dog a bone and hook me up..
Thanks everyone..
(and if you're in the market for a Case-Mate Tough case then I'll make ya a deal....although it's prolly not worth the shipping..lol)
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
IamPro said:
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
Click to expand...
Click to collapse
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
PM me if you really want the Case-Mate, I'll prolly keep it until I find something better though, it's slippery but at least it's protected when it falls.. And yeah, I had a Fly Grip, but I made the mistake of selling it with the phone I had at the time, plus I pocket this slab of a phone and I'm not sure I could handle the extra bump on the back...
No rush I'm just a case hoarder lol. If you find something else hit me up.
Sent from my SCH-I605 using xda premium
Will do buddy....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Optimistic Pessimist said:
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Click to expand...
Click to collapse
One of the few that's actually described as being grippy, that may be the ticket... haha.. thanks
Sent from the future.....
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Phogg said:
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Click to expand...
Click to collapse
I went ahead and got a cheapo rubber/silicone case from Ebay.. I figure I can't go wrong trying it when it cost <$6 shipped...
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
I just got this one off ebay I like it so far the black lines are the grips lol.
Sent from my SPH-L900 using xda app-developers app
UCSB said:
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
Click to expand...
Click to collapse
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
ericrangel76 said:
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
The best grippy case and most protective case you will find is I Face case
Sent from my SGH-I317M using xda premium
blakjak220 said:
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
Click to expand...
Click to collapse
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
blakjak220 said:
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Click to expand...
Click to collapse
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
ericrangel76 said:
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I honestly prolly wouldn't use the kickstand that much either... but it's good to know that it's probably not as bad as some of the reviews..
UCSB said:
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
Click to expand...
Click to collapse
That looks pretty good.. may have to get one if that one from Ebay turns out to be crap..
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
blakjak220 said:
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol.
Click to expand...
Click to collapse
I actually meant (egrips) since I had seen it recommended in another thread here
Hopefully this might be some help
Hi guys and gals, it's been a while since I've done a case review and this time it's a case from French manufacturer Noreve, who are known for their hand made, premium and genuine leather cases.
This time around I decided to go for a pouch, as I wanted something different, and was also curious as to how it was going to be crafted, since these are all hand made. Why the pouch, you ask? Well I just think they look great. While not the most practical of cases maybe, as you have to take the device out each and every time you want to use it, and you can't use the always on display, I just think it looks elegant. Going out for the night? Throw this case on. I've found it to be great since you're not distracted when any notifications come in, and when you put it on a table, it just looks elegant like most other phone cases simply do not. I'm not a big fan of plastic cases because they make the device look cheap. Think about it, you buy a phone for nearly $800, then you put a $5 plastic case on it, which just looks terrible. In my opinion, it totally takes away from the phones metal and glass construction. Also with the S7 Edge, I love the way it feels in the hand naked, and with this case you always have that experience.
As always, this case from Noreve is also exceptionally well made. It took a few weeks for it to arrive, since they only start making them once you order one, and depending on the finish, it can take longer or shorter. But normally it's about two weeks, which is perfectly fine for a custom made, leather case.
Unboxing a Noreve case is always an event. It comes in a very handsome red box, which is sealed by plastic wrap. Inside the box, you'll find a protective red pouch for your case - this is a very nice touch, and I love that they do this, when they really don't have to. But the devil is in the details. Inside the pouch, you'll find your case - and the first thing that you'll probably notice is the brilliant smell of genuine leather. It just adds something to the overall experience that I enjoy.
The case is made exceptionally well. Noreve cases have always been constructed with very high attention to detail, but I believe it's even higher now as there are no flaws with the case whatsoever. Because this is a pouch style case, there are no cut outs for the camera, power or volume rocker buttons. None for the micro USB or headphone jack, either. The only cut outs are for the speakers on the bottom. I think this is perfectly fine, and whenever I wanted to charge the phone or plug in some headphones, I'd just reverse the phone and put it into the pouch in reverse. I found this to be a practical and easy solution.
In conclusion, I am pretty much blown away by this company yet again. Never received a bad case from them, they only seem to get better. Mine is in the Ambition (grained leather) finish, but Norever offer a whole bunch of different finishes which you can also then customize. Basically, the sky is the limit. These guys can do whatever you want. They're a bit on the pricey side (my case was $45.40 - free shipping with DHL) but as we all know, you get what you pay for. This is not one of those Chinese made, fake leather cases which will rip and tear after a few months. Hell, I'm still using the one I have for my Galaxy Nexus, which should say something.
Here are some pictures below of this beauty. Thank you all for reading, and here's a link to their product page.
Cheers.
Can you elaborate on the inner material? How screen friendly is it?
Sent from my SM-G935F using Tapatalk
antisp1n said:
Can you elaborate on the inner material? How screen friendly is it?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
The inner material is also leather, but more of a matte leather with the company logo branded into it. I'll try to get a picture up for you, but I haven't had any problems with it scratching the screen.
Laventura said:
looks good , where can you get it ? u.S ?
Click to expand...
Click to collapse
You can just order online from their site here, I believe they have worldwide free shipping with DHL.
Honestly to me that looks like a recipe for disaster. If anything like a grain of sand gets in it, you are running the screen down the inside material and it could scratch it.
Chilinmichael said:
Honestly to me that looks like a recipe for disaster. If anything like a grain of sand gets in it, you are running the screen down the inside material and it could scratch it.
Click to expand...
Click to collapse
Depends on where you live and what you do I guess. Last time I was in contact with actual sand was like 4 years ago.
Nice review and beautiful pictures.
Great review and photos, but it's not for me personally.
Sent from my SM-G935F using XDA-Developers mobile app
Chris_c81 said:
Great review and photos, but it's not for me personally.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Cheers, thanks for reading. Just want to provide options :good: