why clockwork mod e2 or e3 - Galaxy S I9000 Q&A, Help & Troubleshooting

hi every body
i want to install custom rom , it require to back to ecliar ver. then froyo stock rom then download the custom rom , the problem after install eclair and froyo the stock rom ( original ) ,then when i want to install the custom rom through the clockwork mod i foud it appear as e3 not e2 so i cant( install zip from sdcard)
the quasion :
1-why some times appear e2 and some times appear e3 ?
2-when it appear e3 how can i return it to e2 ?
please help

2e is in all 2.1 roms..Samsung changed that in the 2.2 roms to stop people flashing unofficial zip files..Now you have flashed froyo again 2.2...you have put 3e recovery back on...In the development forums search for 2e...you need to flash 2e back using odin before you can flash clockwork.
Sent from my GT-I9000 using XDA App

thanks for your reply man , but also it appear in my galaxy s device e3 even after install eclair 2.1 and e3 after froyo 2.2

Install chainfire's or hardcores kernel with Odin (or Heimdal if you are on Linux/Mac OS), they come with root and CWM recovery, which is the only recovery, that let's you flash unsigned zip ROMs (Samsung's 2e or 3e won't). And next time, this is a question and therefore belongs in the Q and A section!

Related

[Q] Flashing to 2e recovery

I updated my Galaxy S to the latest stock firmware 2.2.1 Froyo so now I need to flash back to recovery 2e. I've found a thresd containing kernals on here and wondered if the CF-Root-XX_OXA_JPU-v1.3 would be suitable and safe to use to get recovery 2e.
http://forum.xda-developers.com/showthread.php?t=788108
yes i've flashed it and it is safe and easy to use
..suitable for my Galaxy S running Froyo 2.2.1? Would this also give me recovery 2e in the place of version 3e?
Mattyboii87 said:
..suitable for my Galaxy S running Froyo 2.2.1? Would this also give me recovery 2e in the place of version 3e?
Click to expand...
Click to collapse
Worked for me running JPU (2.2.1).
From the page CF-Root page:
"2e" recovery (can flash unsigned update.zip's)
This is what you want.

[Q] ClockworkMod Recovery doesn't work

Hi everyone.
I installed ROM Manager and flashed ClockworkMod Recovery, but even though the phone said it successfully flashed it, when I enter recovery mode I get the stock recovery. I even tried using the apply sdcard:update.zip option, but it gives me an error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I even considered installing Amon RA's recovery, but there doesn't seem to be a version compatible with this phone. What should I do? Is there another recovery you'd suggest me to install? If not, what can I do to get the ClockworkMod Recovery to work? Any help would be much appreciated
You must have recovery 3e. Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Sent from my GT-I9000 using XDA App
Sorry if my questions are too basic, but I'm a new Android user.
android.francis said:
You must have recovery 3e.
Click to expand...
Click to collapse
When I enter the stock recovery mode, it says Android system recovery <3e>. Does that mean anything?
android.francis said:
Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Click to expand...
Click to collapse
On the creator's blog it says that SpeedMod "works on all stock Froyo ROMs XXJPO/DXJPA/XWJPA and popular custom ROMs", although his thread doesn't state so. My ROM is Froyo I9000BUJP7; am I safe installing this kernel? Also, I don't know if it matters, but my phone is network locked.
Thanks for your help.
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
android.francis said:
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
As android.francis said your best bet is to flash a kernel with 2e. I use cf root it always does the job for me.. http://forum.xda-developers.com/showthread.php?t=788108
I am having the same issue, now installed the Speedmod kernel, how can I enter the CWR now?!
My stock recovery still says 3e
Hello,
I had the same problem and I used cf root too. It works very well and if you use a stock rom you will find the rigth kernel there. I only had some problems to find the rigth kernel for my branding firmeware, because this I flashed a stock rom before and after cf root.
Clockwordmod Rom Mgr boots into 3e but up button/power/menu button boots speedmod 2e.
Here is a weird one I think. I installed stock JVH 2.3.3 (from wuala site I9000XWJVH.7z) which I rooted with CF-Root (CF-Root-WX_NEE_JVH-v3.2-CWM3RFS.tar) and then applied Speed mod (speedmod-kernel-k15h-t24-300hz.tar). If I press the 3 button combination I get the speedmod 2e recovery and can backup and restore, install update.zips and reformat partitions to ext4 just fine. So far so good. All updates performed using ODIN.
Here is the problem. I installed a 'paid for' version of ClockworkMod Rom manager (from the market) but when I select backup or 'reboot into recovery' I get the stock 3e kernel and it fails.
Any ideas?
Thanks

CWM recovery problem?

Hi all, i just recently rooted my i9000m with psneuter on superoneclick, easy stuff, i came from a desire z so in comparison the root process was much easier, anyways i
went to rom manager, flashed CWM, reboot into recovery, and voila, stock 3e recovery, no reinstall packages option, and apply update.zip not working. What's wrong?
baseband version I9000UGJL2 btw
crap just realized this is in wrong section, please disregard
Facing the same problem here. It seems the froyo has recovery 3e which doesnot allow the unsigned zips to flash. U need to get 2e recovery to flash clockworkmod and then you can install the custom roms, backup and restore etc etc....
There is a video tutorial on you tube using speedmod kernel and Odin to get recovery 2e in stock 2.2...
Samsung Galaxy S I9000 FROYO, Z4root, OCLF.

[Q] clockwork and voodoo kernel issue

Hello.
So i've got a problem with my I9000.
I've upgraded it to froyo, official release, so i'm stuck with the 3e recovery.I recently flashed the voodoo lagfix kernel via Odin. I would like to get clockwork recovery to replace 3e, but I understand i have to flash it via Odin, too. My question is : Is clockwork's kernel going to replace voodoo? If so, how can i have them both?
Thanks a lot in advance.
if you upgrade offical froyo then u must first do a root..the root files can be find here http://forum.xda-developers.com/showthread.php?t=788108...download correct root for your firmwire phone...then flash it tru odin..when u done with that u must download a rom manager from market...and install it to get clockwork mode =)
I wouldn't follow the previous poster's advice.
If you're going to use cwm, why do you want stock firmware? Try flashing speedmod kernel to get cwm, which has built in root and lagfix accesable from recovery. Or just go to a custom fw like docrom kitchen.
Best procedure for going custom with the sgs is a single flash of speedmod w/ cwm from odin, and then flash anything else via cwm.
Sent from xda premium app on i9000m.

[Q] [i9000] Recovery mode problem

Originally I had 2.2 on my SGS. When Samsung released the update to 2.3 Kies couldnt update my phone. So I applied the recovery mode downgrade from 3e to 2e via Odin and flashed a custom ROM from romkitchen.org
Now I wanted to flash team ICSSGS rc3.1 rom to my phone but when I go to recovery mode all I get is a black screen.
The phone is working though, and pressing the power button boots it up.
So I installed rommanager.apk by Clockworkmod and via it, cwm recovery.
But still the same black screen.
What can I do to get recovery fully operational again?
Usually when you create a ROM from ROM Kitchen you have chosen a kernel. Which kernel you have chosen?
A recommended way: flash a custom kernel (you can DL from "Android Development" zone) via odin. Then follow the instruction from ICSSGS.
Hope I can help you!
Ah yea, I've forgotten to mention that. I've chosen Talon kernel. Can you recommend me one?
You could flash Semaphore kernel, pick the version to match your rom you have currently installed. Once you have Semaphore kernel installed you can follow the instructions to install ICS rom.
http://forum.xda-developers.com/showthread.php?t=1112908
I did this now:
1. Return to stock 2.3.3 via Odin
2. Flash root kernel
3. Install CWM recovery
4. Install ICSSGS RC4.1
5. Install devil kernel
Voila
Thanks for the help

Categories

Resources