Related
Anyone else's nook have really slow/sporadic wifi? Mine seems to burst, then come to a crawl and sometimes not do anything at all. The dropbox app is basically useless as it fails to download 99% of the time. The browsers are all slow too. I have wireless N and a 16Mbit connection at home so it's not my internet. My Evo downloads and runs 100x faster than my nook, on 3G.
I'm not having any issues.
None of those issues here on home wifi or tether to Evo. Dropbox is one of my newest fav programs and hasnt stopped an in progress DL once..
I am not seeing any sort of weird "slowness", but I will say that Opera Mobile is, **by far**, the best browser for this device in terms of performance.
yeah it does the same for me. reboot it. it works well on that for while, and sometimes turning wifi off, then back on will help.
sisith said:
Anyone else's nook have really slow/sporadic wifi? Mine seems to burst, then come to a crawl and sometimes not do anything at all. The dropbox app is basically useless as it fails to download 99% of the time. The browsers are all slow too. I have wireless N and a 16Mbit connection at home so it's not my internet. My Evo downloads and runs 100x faster than my nook, on 3G.
Click to expand...
Click to collapse
Yes this happens to me, more often I would like and there are times when it just seems to stop but the wifi is at full bars (what ever they are called). I have noticed that when I check the wifi in the Nook settings the wifi will say "connected-testing", this means it is not connecting, it "sees" the signal but no data is being transfered, turning it on and off usually does the trick. When it says "connected to the internet", data is being transfered.
I too have ridiculously slow network connections. It is almost useless in some apps. But browser seems to be okay.
Can you guys that are having this issue post your Wifi settings and Router models perhaps there is a commonality on this,
Personally I have had no trouble out of mine, Using Wireless N, WPA2, off a Netgear WNDR 3400
I have been experiencing the slow wifi also. Downloading apps from Market is like 1KB/sec.
Running Nookie 0.6.7 from SD card (class 4). Using WPA2 AES.
I'm having slow wifi problems on a new Class 10 (supposedly) froyo install as well.
Not just wifi, too. It seems to go off to lala-land for a few seconds when I try to do much of anything. Scrolling and things like that still respond, but the apps themselves freeze.
Ok, so that is Two people using Froyo having the wifi problem? what rom are you other guys using?
I have not had this problem and I'm Running Rooted 1.1
Perhaps this is a issue with the Froyo build?
My nook was rooted on 1.0 and I'm running stock 2.1 android and I'm having the same problems
Sent from my ADR6300 using Tapatalk
My nook's connection is unbearably slow on my home connection, which is wireless b/g with WPA PSK. If connect anywhere else (except for a Border yesterday) it does not have this problem.
Also have the "connection testing" problem. I am returning mine to Best Buy - will advise.
ROM 1.0.1 problem not as bad
ROM 1.1.0 problem unacceptable...
Both rooted...
Yes, it's definitely only a froyo issue with me. My rooted 1.1 stock rom is zip-zip-zippy.
I've tried froyo installs four times (both the std and mod versions) on a Class 4 and a Class 10 card. All had wifi issues and general sluggishness. And yet I see people saying froyo is quick. Hmmm....
brie987 said:
Yes this happens to me, more often I would like and there are times when it just seems to stop but the wifi is at full bars (what ever they are called). I have noticed that when I check the wifi in the Nook settings the wifi will say "connected-testing", this means it is not connecting, it "sees" the signal but no data is being transfered, turning it on and off usually does the trick. When it says "connected to the internet", data is being transfered.
Click to expand...
Click to collapse
This is a hardware problem. I had the identical symptom - tried all sorts of apps (softlocker, etc...)
Just returned by exchanging my NC at Best Buy and the problems are gone. I am at 1.1 with Monster Pack 0.7.
The offending NC serial no is 2010 110 0650xxxx
The good NC serial no is 2010 110 1509xxxx
So make sure the SN of the replacement unit is higher!
I've had this problem since the day I bought my nook.
A couple of things I've found...
1) The problem is with how the nook handles wifi. My college wifi is a piece of crap, and everything has problems connecting. Nook won't/can't establish a reliable connection.
2) I have no problems with wifi using DeeperBlue's HoneyComb. Hell, HC can get a better signal than my notebook. If I can get that to install market, I'll just run that off the sdcard. Battery life seems better there too.
3) If you get internet at B&N, then it's not a hardware problem. Every Nook of any kind has the same problems that i'm having.(on this network)
a couple of solutions I found.
1) Connectify. Nook doesn't really like it, but it works better than no intertubes.
2) Reboot the wifi. It works sometimes.
3) pray?
I've been having odd wifi problems with my NC, and I'm at my end with this.
My NC is stock, unrooted v.1.1. I can boot from one of two Nookie Froyo SD cards (one with an OC kernel, another vanilla).
Quite simply, the Android side will no longer connect to the internet, Marketplace, etc. The B&N stock side does just fine.
The Android side worked briefly -- out-of-the-box, I connected it to an open network and got on the Marketplace, whereupon it locked up on me. I put it away, and didn't pick it up until yesterday, at which time I found that no matter which SD card I used, there's nothing doing on wireless networking. While Android finds and connects to open or secured networks, I can't bring up a webpage, go to email, check the Market, you name it.
I don't think this is a hardware issue given that the Stock side can get online (albeit slowly at times). What the eff is going on with my Android side? Should I start over and build up *yet another* card? What can I do to diagnose and solve this?
I'm willing to return this NC, but I don't see the point if I'm somehow doing something to "break" the wireless connectivity in installing apps and pushing files and customizing the install (and whatever else) in creating my Nookie Froyo cards.
Any tips or suggested resources are greatly appreciated!
I had the same problem with Stock, Rooted with Autonooter, and Froyo boot from sd card. I changed the settings on my router to WEP security from AES and now have no problems with it.
rancherochido said:
I had the same problem with Stock, Rooted with Autonooter, and Froyo boot from sd card. I changed the settings on my router to WEP security from AES and now have no problems with it.
Click to expand...
Click to collapse
On the unit that I exchanged, I had problems with both secured (WPA2) and unsecured (Wifi N). The exchange seemed to fix it...
This continued 'dropping and reconnecting' to my WPA/2 has been driving me nuts and I found the holy grail for my problem to share.
During the course of troubleshooting I:
1. updated router firmware
2. changed security from wep to wpa to wpa2
3. hard coded the nook mac address to enabled, even though there was no block setup.....
4. YadaYada.... pullin my frickin hair out then the moment of calrity
When I observed 'connected devices to my wireless I noticed that all other devices in da house had typical host names like laptop1, server1 whatever and the host name for the nook when attempting to connect was, and I quote
'android-873iurhfier98734598'
or in other words a dash with a huge random number/letter sequence that showed up as funky 'alien' ascii characters to the router.
So the fix was:
goto settings
goto applications
goto development
goto device hostname
dropdown to edit and backspace(erase) the dash-----bull****
I ended up with a host name of android
went back to wifi settings, forgot and reconnected and BAM
Done deal.
Hope this helps some of you who are having wifi problems.......
I believe this is related to certain wireless routers being unable to translate the characters into something other then gibberish ascii characters it believes its seeing????
whatever I dont care anymore....
didnt fix it for me....
**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat
yourm0m1 said:
didnt fix it for me....
Click to expand...
Click to collapse
Hmmmm,
I have a belkin N1 wireless router and did update to the latest firmware. I did change several settings during the course of getting my issue resolved as follows:
Radio = 11g
Bandwidth = 20Mhz+40Mhz-auto
QOS = OFF
Authentication = WPA-PSK+WPA2-PSK
Encryption = TKIP+AES
obscure PSK = OFF
hopefully these will help..............
mooja said:
for the love of god and all that is holy, this fixed my issue.
if you were here id give you a beer or something, this is outstanding and i will probably love you forever
Click to expand...
Click to collapse
Easy there big fella.............. glad it worked for you
mooja said:
**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat
Click to expand...
Click to collapse
Try the settings I gave in post #4
I have been running consistent for several hours now.....
with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal
yourm0m1 said:
with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal
Click to expand...
Click to collapse
I had issues with cm7.0.2/3 stables and phiremod 6.2, .29 kernels until I stumbled on my fix. However this also works well for me with the 2.6.32, beta 3.1.
FYI, I have been running all of these off SD, my emmc is 1.01 rooted and very stable.
Dude, you are a lifesaver. I've been running into this problem frequently and it's sort of a kiss of death for WiFi when it happens and I have to re-do the whole CM7 SD Card. It's working perfectly now though after I just had a card fixed pretty much perfectly.
Thanks for posting this...
I didn't have any connection-disconnection type WiFi problems, but I went ahead and shortened the name to just android. What it fixed for me is the YouTube on Phiremod 6.3. Previously, any clip would stop with an error message. The progress bar of loading the clip ahead of the video playback was moving slowly at the beginning, but then jumping to the very end, and when the playback was at the "jumping point", it was giving me an error. Now, after this "fix", the bar moves along slowly all the way to the end, and video never stops with an error. Even if the playback catches up with the bar, it just pauses and waits for more to be loaded (mainly for HQ clips, occasionally).
Thanks again for this "unexpected" YouTube fix
FYI, I'm no longer able to get WiFi on the 108 Nightly. I tried this sequence again and haven't had any luck. Looks like a full wipe/install again.
EDIT: Just turned off the "Network Notification" and it's working fine again. Strange, but it keeps me from having to wipe AND my WiFi is working again. I hope that helps someone else.
Well since everyone is posting what worked for them, I figure I might as well too
I started getting this problem yesterday, never had it in the week up till then.
Problem started when I changed did a factory reset on my Belkin router (yes I know Belkin sucks) and changed the security to WEP (I know, I know, WEP sucks too) so that we could connect to XBox Live with an ancient xbox receiver thing (xbox was hardwired in our old apartment, and I'm not buying a new xbox just for freaking built in wifi it should have had in the first place lol).
Enough in the way of background. Suffice to say, I was having the wifi drop issue on my nook, but the xbox, wii, and two laptops were fine.
Last night I tried flashing back to stable CM7, n108, n106, and n85. No go. Also tried the honeycomb port from SDK 11. No go.
I changed the device name in applications -> development to "android" and turned off notifications when there was an available wifi hotspot. Still no go.
Changed about every wifi my POS Belkin had, still didn't work.
I flashed back to stock 1.2 with no root and no CWM, and wifi was still turning on and off.
I did two things since then and one of two things fixed it; not 100% sure which.
1. This morning I downloaded the software for my router from Belkin and reloaded it. Before I could test it, I had to rush off to work.
2. At work I rerooted, reinstalled CWM, and loaded n110, and when I got home IT WORKED!
Seems most likely to me that reloading the router software is what did it, although it may be n110 that did it.
So anyway, for everyone who is as desperate as I was last night, here's two more things to try.
Here was my fix to my issues
http://forum.xda-developers.com/showthread.php?t=1134675
Sent from my NookColor using XDA Premium App
I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.
quai said:
I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.
Click to expand...
Click to collapse
See if the settings in my above link help
Sent from my NookColor using XDA Premium App
I can say this forum helped tremendously. Editing the Nook hostname fixed my WIFI issues. I have a Linksys WRT610N V1 with WPA2-Personal TKIP/ASIP with no issues now. All I did was make this change... Excellent connectivity now.
This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc
christoophat said:
This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc
Click to expand...
Click to collapse
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App
SCrid2000 said:
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
agreed. NC is charging now, but hoping that this issue is over for good. Thanks for the idea to look at the FW as a solution
Strange. I was using build 120 with my router with no issues, then after a few days it stopped working and would not reconnect even after a reboot. Forgetting the connection and recreating it didn't work either. However making the connection not use AES worked.
Sent from my HTC Vision using Tapatalk
HTC One M9 on Sprint. Running ViperOneM8 4.3.0. No issues at all for a long time. Only things I've recently installed are apps or games.. I don't really fool around with Viper, so I doubt I did anything.
Anyway, this has been running fine for a long time now. I've been using 4.3.0 since it came out. Lately my WiFi will not stay connected.. home, work, doesn't matter.
Any ideas what to do?
Originally I thought I had wireless problems at home, which I did, because my Chromecast wouldn't stay connected and my internet got slow. I troubleshooted that to my wireless extender. I disconnected it and things were fine.. speed back up, phone and Chromecast seemed to stay connected.
So, then I noticed phone wasn't staying connected. Just seems to randomly drop and connect. Could happen one second, and the next, but then could be good for hours. Same thing at work.
I'm in the same locations I always have been.. for example my desk is in the same spot at work and at home, router in the same spot, etc. At home the router is a few feet away usually.. at most 15 or 20 feet to another room in the house.
yuppicide said:
HTC One M9 on Sprint. Running ViperOneM8 4.3.0. No issues at all for a long time. Only things I've recently installed are apps or games.. I don't really fool around with Viper, so I doubt I did anything.
Anyway, this has been running fine for a long time now. I've been using 4.3.0 since it came out. Lately my WiFi will not stay connected.. home, work, doesn't matter.
Any ideas what to do?
Originally I thought I had wireless problems at home, which I did, because my Chromecast wouldn't stay connected and my internet got slow. I troubleshooted that to my wireless extender. I disconnected it and things were fine.. speed back up, phone and Chromecast seemed to stay connected.
So, then I noticed phone wasn't staying connected. Just seems to randomly drop and connect. Could happen one second, and the next, but then could be good for hours. Same thing at work.
I'm in the same locations I always have been.. for example my desk is in the same spot at work and at home, router in the same spot, etc. At home the router is a few feet away usually.. at most 15 or 20 feet to another room in the house.
Click to expand...
Click to collapse
Have you tried doing a backup and reseting the phone or back up and delete all then reinstall rom, gapps, and restore backup?
Could do that or try to get ahold of the wifi modem and reinstall/update that
Heh I said M9 above.. I meant M8. I was at work not doing work lol.
I've already reset the modem in my previous test.. anyway I was dreading doing a full reinstall.. but I'll do soon.. I may leave it until after Thanksgiving since it otherwise works perfectly.
I totally forgot about the turn Airplane mode on and then off. Lemme try that first.
If anyone is wondering.. I finally wiped and re flashed ViperRom. Had some hiccups at the beginning, but updating everything in the Play store solved it. Working fine again.
I've had my two TP's rooted for years, mainly JC Sullins' builds. My wife's TP stopped connecting to our wireless, and she gave up on it a few years ago. I dusted it off, did a clean install with the TP Toolbox and loaded JC's Cyanogen 12.1-20160109. I also took the opportunity to delete the WEBOS since we never used it anyway. Well, the upgrade to a new operating system didn't fix my wireless problem. It still shows that it's trying to turn the wifi on. It never happens.
I've been searching for days, and still can't find a solution to this dilemma. I'm a firm believer of searching for an answer first, and hate to admit that I can't figure it out.
What do I need to do here?
I also loaded my TP with the same build, and it works like a champ. Mine never had a wifi connection problem.
I'm all ears.
Michael
wfdbackdraft said:
I've had my two TP's rooted for years, mainly JC Sullins' builds. My wife's TP stopped connecting to our wireless, and she gave up on it a few years ago. I dusted it off, did a clean install with the TP Toolbox and loaded JC's Cyanogen 12.1-20160109. I also took the opportunity to delete the WEBOS since we never used it anyway. Well, the upgrade to a new operating system didn't fix my wireless problem. It still shows that it's trying to turn the wifi on. It never happens.
I've been searching for days, and still can't find a solution to this dilemma. I'm a firm believer of searching for an answer first, and hate to admit that I can't figure it out.
What do I need to do here?
I also loaded my TP with the same build, and it works like a champ. Mine never had a wifi connection problem.
I'm all ears.
Michael
Click to expand...
Click to collapse
Give this a try, it's a shot in the dark but I had this happen back in CM7 or 9 days.
Power off bothfo the TP's. We'll use your's for the 'known good' device.
Change the channel on your router to a higher number, like maybe 12...
Power cycle the router. (sorry if this screws up any other devices that are attached.)
Power up TP#1 & see if it connects and verify that you can get out on the net.
Then try #2.
if a no-go go then grab this terminal emulator so we can grab some info using the good ol' command line.
I wondering if the Wifi interface is dead but holding out hope that it isn't.
_Dan
Thank you for the reply.
I really can't get to my router right now to try that.
When I turn on her wireless setting, it just says "Turning wifi on...." and never does. I never get to see a list of available networks.
So what is this wifi interface that you speak of? I'll start looking into that.
Better still install this for retrieving syslogs. Someone in another thread recommended it and it is a lot easier to use.
_Dan
I finally got the SysLog installed. Opened it up, and there is a statement that there is - "No root access. Without root access, it's not possible to get system or modem logs, and with some 3.x kernels it also may not be able to get kernel logs."
Hey,
So I am having serious wifi issues since I installed my Google Home. I use a chromecast too, but I think it's safe to say that it's the Home device that f-ed up wifi network.
I did read all the articles back i January/February that I was not alone with the issue, and as far as I understand - Google rolled out a fix about a month ago.
However, I am still having issues. My wifi drops for no reason (on all devices at the same time, phones included) for a few seconds and then comes back up. I've tried rebooting the router, and updating firmware on the router but no help. Today I pulled the plug to the Google Home until this has been fully resolved.
I love my Home and would like to have it connected. Did the correction that Google rolled out solve it for everyone else here or does anyone still have issues - or is it just me?
How can I see what firmware/software I am running on the Home? I have obviously tried to ask it, but it responds "this is not supported yet".
Any ideas?
Vol
I had the same problem on my main router, so I tried connecting it to my secondary router, and it worked, but since that one was supposed to be for the other part of the house, I got a cheapest used router I could (doesn't even support n standard) and created a separate network with different SSID, now I use it only to connect google home devices, chromecasts and other smart home wifi devices, and it works (it still uses my main router's DHCP server, and network, it is just AP with a different SSID), oh and I use channel 6 on that router btw.
Volatyle said:
Hey,
So I am having serious wifi issues since I installed my Google Home. I use a chromecast too, but I think it's safe to say that it's the Home device that f-ed up wifi network.
I did read all the articles back i January/February that I was not alone with the issue, and as far as I understand - Google rolled out a fix about a month ago.
However, I am still having issues. My wifi drops for no reason (on all devices at the same time, phones included) for a few seconds and then comes back up. I've tried rebooting the router, and updating firmware on the router but no help. Today I pulled the plug to the Google Home until this has been fully resolved.
I love my Home and would like to have it connected. Did the correction that Google rolled out solve it for everyone else here or does anyone still have issues - or is it just me?
How can I see what firmware/software I am running on the Home? I have obviously tried to ask it, but it responds "this is not supported yet".
Any ideas?
Vol
Click to expand...
Click to collapse
Ok, i feel my networking knowledge can come handy here! Lol. Home,three chromcasts, firetv, firestick x2; Nghthawk x8000->asusrtac68u->lan2wanWNR1000(for old 2nd gen sony bluray dlna and one roomstreaming)+wirelessLinksysEA6350->asusrtac88u. Yes, intriguing network! 6bdrm 3300sqft house. Biggest ever afforded! So, needless to say i pay TWC for 100Mbps, capping at 230mbps on the rtac68u ethernet bridge to wired desktop! All running my own modified compiled tomatousb. Linksysea6350 is ddwrt, kongbuild and a PIA so thats w/e stock kong wanted. Well safe to say ive been at making all this work!! What i need from you is topology and setup, running broadcoms or others? I find broadcom way easier to mess with. Second, you running custom or boxed units? And third is the google products subnetted (more of a b***h if you ask me!) And connected 2.4 or 5? N or AC? And how are you allocating resources? IE using QOS or similar? If you can't answer those im need (if unboxed and freed) "logcats", iptables, etc.. more than safe to say, the home not the culprit in sense to it "drowning" out the wifi band, but could for drown resources, IE low grade hardware, hardware beginning stages of failure and one extra workhorse did it, RAM, eMMC, getting the gist? Im gonna say w/slight certainty you might be rebooting not wifi actually cutting out. You also could if custom firmware corrupted something that the home doesnt like. But wont know w/out the numbers to look at. All i got from you is, either a LAN2LAN or bridge as i read your main hib is the DHCP, and is the SSID you "created" a subnet? And your "30" dollar router also could not be up to task.
And sorry if the reply is anything not right, first post ever here! Years of only reading lol. And something wrong with my cheap phone cracked screen phone replacement everytime keyboard is opened! Doubt its this website. my pixel xl tried to drive on the interstate outside of my car...so sad.. just know im gonna punch this phone or throw from the anger ive gained trying to type and the sign-in to post.. thank you.
Similar solution worked for me
I use a dedicated connection for all things GH related. This stopped the wifi dropout.