Anyone else's nook have really slow/sporadic wifi? Mine seems to burst, then come to a crawl and sometimes not do anything at all. The dropbox app is basically useless as it fails to download 99% of the time. The browsers are all slow too. I have wireless N and a 16Mbit connection at home so it's not my internet. My Evo downloads and runs 100x faster than my nook, on 3G.
I'm not having any issues.
None of those issues here on home wifi or tether to Evo. Dropbox is one of my newest fav programs and hasnt stopped an in progress DL once..
I am not seeing any sort of weird "slowness", but I will say that Opera Mobile is, **by far**, the best browser for this device in terms of performance.
yeah it does the same for me. reboot it. it works well on that for while, and sometimes turning wifi off, then back on will help.
sisith said:
Anyone else's nook have really slow/sporadic wifi? Mine seems to burst, then come to a crawl and sometimes not do anything at all. The dropbox app is basically useless as it fails to download 99% of the time. The browsers are all slow too. I have wireless N and a 16Mbit connection at home so it's not my internet. My Evo downloads and runs 100x faster than my nook, on 3G.
Click to expand...
Click to collapse
Yes this happens to me, more often I would like and there are times when it just seems to stop but the wifi is at full bars (what ever they are called). I have noticed that when I check the wifi in the Nook settings the wifi will say "connected-testing", this means it is not connecting, it "sees" the signal but no data is being transfered, turning it on and off usually does the trick. When it says "connected to the internet", data is being transfered.
I too have ridiculously slow network connections. It is almost useless in some apps. But browser seems to be okay.
Can you guys that are having this issue post your Wifi settings and Router models perhaps there is a commonality on this,
Personally I have had no trouble out of mine, Using Wireless N, WPA2, off a Netgear WNDR 3400
I have been experiencing the slow wifi also. Downloading apps from Market is like 1KB/sec.
Running Nookie 0.6.7 from SD card (class 4). Using WPA2 AES.
I'm having slow wifi problems on a new Class 10 (supposedly) froyo install as well.
Not just wifi, too. It seems to go off to lala-land for a few seconds when I try to do much of anything. Scrolling and things like that still respond, but the apps themselves freeze.
Ok, so that is Two people using Froyo having the wifi problem? what rom are you other guys using?
I have not had this problem and I'm Running Rooted 1.1
Perhaps this is a issue with the Froyo build?
My nook was rooted on 1.0 and I'm running stock 2.1 android and I'm having the same problems
Sent from my ADR6300 using Tapatalk
My nook's connection is unbearably slow on my home connection, which is wireless b/g with WPA PSK. If connect anywhere else (except for a Border yesterday) it does not have this problem.
Also have the "connection testing" problem. I am returning mine to Best Buy - will advise.
ROM 1.0.1 problem not as bad
ROM 1.1.0 problem unacceptable...
Both rooted...
Yes, it's definitely only a froyo issue with me. My rooted 1.1 stock rom is zip-zip-zippy.
I've tried froyo installs four times (both the std and mod versions) on a Class 4 and a Class 10 card. All had wifi issues and general sluggishness. And yet I see people saying froyo is quick. Hmmm....
brie987 said:
Yes this happens to me, more often I would like and there are times when it just seems to stop but the wifi is at full bars (what ever they are called). I have noticed that when I check the wifi in the Nook settings the wifi will say "connected-testing", this means it is not connecting, it "sees" the signal but no data is being transfered, turning it on and off usually does the trick. When it says "connected to the internet", data is being transfered.
Click to expand...
Click to collapse
This is a hardware problem. I had the identical symptom - tried all sorts of apps (softlocker, etc...)
Just returned by exchanging my NC at Best Buy and the problems are gone. I am at 1.1 with Monster Pack 0.7.
The offending NC serial no is 2010 110 0650xxxx
The good NC serial no is 2010 110 1509xxxx
So make sure the SN of the replacement unit is higher!
I've had this problem since the day I bought my nook.
A couple of things I've found...
1) The problem is with how the nook handles wifi. My college wifi is a piece of crap, and everything has problems connecting. Nook won't/can't establish a reliable connection.
2) I have no problems with wifi using DeeperBlue's HoneyComb. Hell, HC can get a better signal than my notebook. If I can get that to install market, I'll just run that off the sdcard. Battery life seems better there too.
3) If you get internet at B&N, then it's not a hardware problem. Every Nook of any kind has the same problems that i'm having.(on this network)
a couple of solutions I found.
1) Connectify. Nook doesn't really like it, but it works better than no intertubes.
2) Reboot the wifi. It works sometimes.
3) pray?
I've been having odd wifi problems with my NC, and I'm at my end with this.
My NC is stock, unrooted v.1.1. I can boot from one of two Nookie Froyo SD cards (one with an OC kernel, another vanilla).
Quite simply, the Android side will no longer connect to the internet, Marketplace, etc. The B&N stock side does just fine.
The Android side worked briefly -- out-of-the-box, I connected it to an open network and got on the Marketplace, whereupon it locked up on me. I put it away, and didn't pick it up until yesterday, at which time I found that no matter which SD card I used, there's nothing doing on wireless networking. While Android finds and connects to open or secured networks, I can't bring up a webpage, go to email, check the Market, you name it.
I don't think this is a hardware issue given that the Stock side can get online (albeit slowly at times). What the eff is going on with my Android side? Should I start over and build up *yet another* card? What can I do to diagnose and solve this?
I'm willing to return this NC, but I don't see the point if I'm somehow doing something to "break" the wireless connectivity in installing apps and pushing files and customizing the install (and whatever else) in creating my Nookie Froyo cards.
Any tips or suggested resources are greatly appreciated!
I had the same problem with Stock, Rooted with Autonooter, and Froyo boot from sd card. I changed the settings on my router to WEP security from AES and now have no problems with it.
rancherochido said:
I had the same problem with Stock, Rooted with Autonooter, and Froyo boot from sd card. I changed the settings on my router to WEP security from AES and now have no problems with it.
Click to expand...
Click to collapse
On the unit that I exchanged, I had problems with both secured (WPA2) and unsecured (Wifi N). The exchange seemed to fix it...
Related
I have a PPTP account with HideIPVPN which works perfectly on my iPod Touch and on my XP computers. It does not work on my Motorola Milestone - the connection is "successful" but no data gets through. At some point on some build of Froyo (I can't remember which), I was quite successfully able to use this VPN on my Nexus One for long extended periods to listen to Pandora Radio.
Recently I tried CyanogenMod 6 RC3, and to my disappointment, I could connect to the VPN but not get any data to go through. So I restored to my nandroid backup on FRF91 (which I'd originally applied via the pre-rooted update.zip). I retried the VPN and it works but after 30-90 seconds the data cuts out and won't work anymore.
Has anyone here had consistent success with a PPTP VPN on FRF91 or CM6 RC3? If so, did you have to do anything special to make it work?
Thanks
Charles
The "cut out" might be related to WiFi keepalive bug. Keep the phone awake and see if the connection still cuts out.
Jack_R1 said:
The "cut out" might be related to WiFi keepalive bug. Keep the phone awake and see if the connection still cuts out.
Click to expand...
Click to collapse
The phone remains awake the whole time. I connect to the VPN and then immediately jump to browser. I load one page and it pulls down successfully. Then I keep clicking links; after the second or third one nothing works anymore, and no apps are able to see data until I disconnect the VPN. This is reproducible.
On my iPod Touch, the same procedure does not have any trouble - I can connect to the VPN and browse for hours.
I located the post on HowardForums where I reported my success with VPN + Pandora on Froyo. It was June 6th, and at that time the latest Froyo build was FRF50.
So I've taken a nandroid backup and I'm going to try a little experiment... roll back to FRF50 via pre-rooted update.zip and see if PPTP works on that build. Don't know if my phone will have a problem with rolling backwards but worst case I can just restore.
Rollback test #1: Didn't clear data/cache first time round. Same results as before, ability to browse cuts out within about 30 seconds of the VPN connection.
Test #2: Wiped cache/data to get a blank (but still rooted) FRF50. Same results again... first page or two I browse to will load but then nothing else will.
Could rooting the phone somehow have destroyed the ability to use a PPTP VPN? So strange, I just can't figure out why it worked in June and not anymore today.
Ah well, since I can't get it working on *any* build right now, might as well go back to CM6 and try out the new stable mod. And I'll keep hoping/wishing/etc for a solution to this problem. Any ideas are welcome.
Well this is interesting. I can't get the VPN to work from my home or office wifi (and it works on both with iPod Touch) - but - when I brought my N1 into a WIND Mobile store and tried their test SIM, I was able to connect to the VPN over 3G just perfectly. The connection didn't stall out and I was able to listen to Pandora through the tunnel. This was using CyanogenMod 6.
I wonder why it's not working on wifi?
Am I the only one who cares about this, or is nobody else experiencing the same bug?
Same problem on the Galaxy S. I think its an Android issue, rather than phone. I understand, though never tested, that it works when doing VPN to a linux box, but never to windows or something like a cisco appliance.
OpenVPN works, but takes a fair amount of messing about to get it working.
On CyanogenMod 6.1 / 6.1.1, I can sometimes stay connected now to a PPTP VPN for 5-15 minutes at a time over Wifi. Not sure when it changed.
Hey guys, so I did some research, and it seems the only info that was relevent was this:
http://forum.xda-developers.com/showthread.php?t=959823&highlight=wifi+problem
But that does not help my problem.
So heres the deal. I am running Nookie Froyo 0.6.8 on the eMMC. I started with a Nook updated to 1.1.0, then rooted. Then I installed Nookie Froyo.
Now, I am having issues with the wifi. What happens is that the wifi will work for a minute, then start oscillating between connected and disconnected.
The problem is worse when tethered with my Hero. For example, I connect to my Hero's Wifi tether, then load a web page. The Nook will download about 70Kb, then hang for about 15 sec, then download another about 50-100Kb, then hang, etc.
So I connect to the University of Pittsburgh's wireless network. It works better, but every once of a whole it hangs. Also, after about 5 min, if I go into settings, the wifi keeps turning on and off. It will just turn itself on and off and I need to restart.
So like I said, it is worst with tethering but the wifi is unstable with PITTnet too. I have restarted many times... dunno what to do.
Thanks for the help!
cardriverx said:
Hey guys, so I did some research, and it seems the only info that was relevent was this:
http://forum.xda-developers.com/showthread.php?t=959823&highlight=wifi+problem
But that does not help my problem.
So heres the deal. I am running Nookie Froyo 0.6.8 on the eMMC. I started with a Nook updated to 1.1.0, then rooted. Then I installed Nookie Froyo.
Now, I am having issues with the wifi. What happens is that the wifi will work for a minute, then start oscillating between connected and disconnected.
The problem is worse when tethered with my Hero. For example, I connect to my Hero's Wifi tether, then load a web page. The Nook will download about 70Kb, then hang for about 15 sec, then download another about 50-100Kb, then hang, etc.
So I connect to the University of Pittsburgh's wireless network. It works better, but every once of a whole it hangs. Also, after about 5 min, if I go into settings, the wifi keeps turning on and off. It will just turn itself on and off and I need to restart.
So like I said, it is worst with tethering but the wifi is unstable with PITTnet too. I have restarted many times... dunno what to do.
Thanks for the help!
Click to expand...
Click to collapse
you can try reinstalling froyo on your NC(i had lots of problems with froyo so i dumped it for HC which imo is better)
i did have a wifi problem though where i entered a secondary password on my grandparents wifi(my uncle set up 2) where i would connect for 5 mins than drop connection but that was fixed by entering the primary password
hope this helps
luigi90210
Yeah, I think I will just try installing HC and report back.
Just wanted to say, I flashed to HC, and it works a lot better than I thought it would! Also, the multitasking is GREAT!
BTW, tethering has been rock solid so far! Also, it seems to be only a little slower than the Xoom I got to play with today, which is awesome for a hacked build . Web browsing is great. There are just a few small UI hiccups here and there, nothing that prevents function tho!
Also, out of curiosity, any idea when we will see HC gmail?
I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?
Have you tried turning the WIFI sleep policy to never sleep?
WIFI Settings>Advanced>WIFI Sleep Policy>Never
Ya but it didn't help!
i was having issues but builds 17+ have been much much better.
no fix that i'm aware of. you could try switching your security settings on the router.
I have seen this and have determined that it could be related to router type and or brand.
See this post.
http://forum.cyanogenmod.com/topic/16323-cm7-discussion-of-nightlies/page__view__findpost__p__157374
I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.
mndev12 said:
I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.
Click to expand...
Click to collapse
what exactly are you replacing with that new wifi folder? did this help others?
I've had problems with a friends nook and my router (mine, same CM7 build, works fine). I'd recommend trying what mndev12 said first, and if that doesn't work try turning off all encryption/security on your router and see if it still happens. From what I can gather here on the forums is that some people are having problems with different security configs.
This might help.
I had the same issue with my NC using a D-Link DIR-615 wireless router. I solved this issue by turning Wireless N off. I set mine to BG only. Works flawlessly. Hope this helps.
Another suggestion to folks with Wifi and router issues. Make sure your router has current/updated firmware running on it. I know we all get in the habbit of setting them up and just leaving them but the mfgs do in fact push out firmware updates from time to time that can and do make a world of difference in cases like these, specially on older routers
basrawi said:
I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?
Click to expand...
Click to collapse
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.
Good suggestion will2live. I haven't updated mine since I set it up. However I think it is a driver issue with the TI chip we have, not a router issue.
Sent from my PC36100 using XDA App
so are youll trying to say that this isnt the issue of cm7?i dont think so...i never had such problems with the stock rom..
Im seeing the same thing - running the encore version and my wifi is all open - drops a bit or takes a while to connect? anyone else?
I loaded the most recent version of CM7 and am having issues with the Nook not finding any WiFi. It worked fine for about 12 hours, but now won't find any access points. I have tried turning off WiFi and back on several times as well as rebooting.
Any ideas on how to get the WiFi to see access points?
Try a clean install? My wifi works pretty well ( I sometimes have to turn off and let it shill for 30 sec) on Phiremod 6.1 (cm7.0.2)
Ryjon90 said:
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.
Click to expand...
Click to collapse
I have had serious wifi headaches myself (with both 7.0.0 and 7.0.2). I have tried each about a dozen times, wiping, different versions of CWM recovery, tried nightlies and always the same. Wifi will connect, I'll start downloading something, and then it will disconnect at some point (may be a minute, may be 3 or 4). Turning wifi on and off brings it back to life but only momentarily. Have no issues with Nookie Froyo or stock. I did try connecting to WEP (other than my usual WPA2) but could only do this by tethering to my phone. It seemed to have fewer disconnects but I did still have issues there. Plus, resorting to tethering or a less secure network is also obviously not really a solution. Really hoping a pattern can be discovered to diagnose this issue because its becoming a deal breaker for me. This issue aside, LOVE the ROM.
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
I've had the exact same issue, and I'm not 100% sure yet, but mine completely went away when I uninstalled Setting Profiles Lite. I was using it to turn off Wifi every time it went into suspend mode (same settings I used on Eclair) but since I did that, wifi hasn't burped once. Like you I could barely download anything before it would stop and I had to turn off and back on wifi to make it work again for a while.
this seems to happen to me every morning between 5 and 7am.. most other times it works great.. i cant figure it out either
not using that program.....
Well I checked just to make sure and I am not using the program you mentioned so I am at a loss as to why the wifi will crap out randomly and have to be turned off then on... Any other ideas?
Thanks,
Adan
I'm having the same issue. No idea what's going on, but it's driving me crazy.
I don't seem to have the same trouble just surfing the web, but if I try to download anything or stream video, it craps out about every 5 minutes.
Sent from my NookColor using Tapatalk
Yeah, mine is still crapping out tonight too.. stock wifi works perfect. I am using CM7 on SD, anyone else?
yep yep yep
Exactly the same setup man. Using my CM7 on my SD card and WIFI runs just fine on my reg Nook software, Nookie Froyo, and HC sds i have run....
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
This may be silly, but are you all setting your wifi to 'never sleep's on advanced settings under wifi settings? If you are not familiar with Cm roms, I can see how you might miss this essential setting. Just press the menu key after going into wifi settings, and a secondary menu will come up..with scan, and advanced...under advanced, set wifi sleep policy to never. Hope this helps, but if it's something you all already know, then please disregard.
Delivered by a little dude that lives behind your screen.
mazook98 said:
This may be silly, but are you all setting your wifi to 'never sleep's on advanced settings under wifi settings? If you are not familiar with Cm roms, I can see how you might miss this essential setting. Just press the menu key after going into wifi settings, and a secondary menu will come up..with scan, and advanced...under advanced, set wifi sleep policy to never. Hope this helps, but if it's something you all already know, then please disregard.
Delivered by a little dude that lives behind your screen.
Click to expand...
Click to collapse
yeah, thats one of the first things i do when installing a rom and the problem persists past that
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
i have a mytouch slide and i have try everything and i have same issues with the wifi. a lot of you say to put the wifi on never sleep, but it dosent help. wifi issues still out there on rc4. please help.
ahernandez646 said:
i have a mytouch slide and i have try everything and i have same issues with the wifi. a lot of you say to put the wifi on never sleep, but it dosent help. wifi issues still out there on rc4. please help.
Click to expand...
Click to collapse
So this isn't specific to the Nook Color, it's a CM7 bug overall that Wifi falls out?
What's interesting is my wifi will stay connected, idle, for 8+ hours (while I slept) but I then download 2M of files while eating breakfast and it dies and I have to restart wifi to make it work again...
This is definitely going to make me wait until it's fixed to put CM7 on emmc, this is really aggravating. Which I hate, because I'm really digging CM7. It's perkier, runs smoother, and no B&N shortcut thingy popping up by accident all of the time.
So anyone NOT on SD seeing this problem on the Nook Color? Sounds like this might be a generic CM7 issue but I've also been told that heavy IO on the SD could cause IO problems in other areas, including wifi.
I'm not on SD and having the same problems.
http://code.google.com/p/cyanogenmod/issues/detail?id=3314
Can you guys go there and Star that issue and add your configuration and experience?
And please, if anyone figures out anything, be a hero and tell us I'm thinking about wiping fresh and not installing any apps and seeing if the behavior continues.
Popped out my CM7 SD card and booted to Eclair and just spent 45 minutes updating my apps I hadn't done in 4 days, read Engadget, read some news in Pulse, played a youtube video, downloaded some other data.
Not one hiccup.
CM7 is sooooo nice, hopefully this gets figured out. What's bad is that a lot of people say they don't have the problem, so something is going on.
BUMP
BUMP
Don't want this forgotten until it is fixed
I have been dealing with thisfora while and I seem to have come across a work around. I switched the security settings of my router and made it a compley open network. Since then, I've had zero issues. My wireless network is unsecure now, but I live out in the woods, so I'm not too concerned.
Sent from my NookColor using Tapatalk
Several people have reported this, specifically with the Nook Color. I personally haven't had wifi crashes or refusal to wake up, but I have noticed that websites take significantly longer to load on my Nook Color than they do on either my wifes or my Droid X. Obviously there are a ton of factors that could be responsible for this though.
Okay, so I tried everything I could think of.. Imaged back to totally clean CM7 RC4, not even gapps.. Fiddled with all sorts of CM Perf settings (vm heap, JIT, etc)
Considering I've also had the wifi dropouts on my phone, work, and home router I was convinced it could not be anything router specific, but I have an old Linksys B router that I keep up for my daughters computer which I have an ancient Prism wireless card in so I didn't have to run cables to her room.
It works. I used it about hour last night, off and on for a few hours today. No wifi hangs.
So my next step is to figure out if it's the router or the encryption... My B router has no encryption on it, just MAC filtering to keep out the neighbors. The G router running DD-WRT has WPA Encryption. So I'm going to disable Encryption on the G router and turn on MAC filtering and see what happens. If it works there, it must be related to encryption. If it still fails, it must be something related to the router or router FW.
Okay, first thing I did was change from TKIP+AES to only TKIP on my G router and so far so good. I found some other evidence that AES might be an issue:
http://forum.xda-developers.com/showpost.php?p=11598765&postcount=187
Anyone else, please try TKIP only if your router has AES available?
nopers
Sorry man I don't have AES as a option, so I'm not sure that is the problem...
This continued 'dropping and reconnecting' to my WPA/2 has been driving me nuts and I found the holy grail for my problem to share.
During the course of troubleshooting I:
1. updated router firmware
2. changed security from wep to wpa to wpa2
3. hard coded the nook mac address to enabled, even though there was no block setup.....
4. YadaYada.... pullin my frickin hair out then the moment of calrity
When I observed 'connected devices to my wireless I noticed that all other devices in da house had typical host names like laptop1, server1 whatever and the host name for the nook when attempting to connect was, and I quote
'android-873iurhfier98734598'
or in other words a dash with a huge random number/letter sequence that showed up as funky 'alien' ascii characters to the router.
So the fix was:
goto settings
goto applications
goto development
goto device hostname
dropdown to edit and backspace(erase) the dash-----bull****
I ended up with a host name of android
went back to wifi settings, forgot and reconnected and BAM
Done deal.
Hope this helps some of you who are having wifi problems.......
I believe this is related to certain wireless routers being unable to translate the characters into something other then gibberish ascii characters it believes its seeing????
whatever I dont care anymore....
didnt fix it for me....
**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat
yourm0m1 said:
didnt fix it for me....
Click to expand...
Click to collapse
Hmmmm,
I have a belkin N1 wireless router and did update to the latest firmware. I did change several settings during the course of getting my issue resolved as follows:
Radio = 11g
Bandwidth = 20Mhz+40Mhz-auto
QOS = OFF
Authentication = WPA-PSK+WPA2-PSK
Encryption = TKIP+AES
obscure PSK = OFF
hopefully these will help..............
mooja said:
for the love of god and all that is holy, this fixed my issue.
if you were here id give you a beer or something, this is outstanding and i will probably love you forever
Click to expand...
Click to collapse
Easy there big fella.............. glad it worked for you
mooja said:
**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat
Click to expand...
Click to collapse
Try the settings I gave in post #4
I have been running consistent for several hours now.....
with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal
yourm0m1 said:
with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal
Click to expand...
Click to collapse
I had issues with cm7.0.2/3 stables and phiremod 6.2, .29 kernels until I stumbled on my fix. However this also works well for me with the 2.6.32, beta 3.1.
FYI, I have been running all of these off SD, my emmc is 1.01 rooted and very stable.
Dude, you are a lifesaver. I've been running into this problem frequently and it's sort of a kiss of death for WiFi when it happens and I have to re-do the whole CM7 SD Card. It's working perfectly now though after I just had a card fixed pretty much perfectly.
Thanks for posting this...
I didn't have any connection-disconnection type WiFi problems, but I went ahead and shortened the name to just android. What it fixed for me is the YouTube on Phiremod 6.3. Previously, any clip would stop with an error message. The progress bar of loading the clip ahead of the video playback was moving slowly at the beginning, but then jumping to the very end, and when the playback was at the "jumping point", it was giving me an error. Now, after this "fix", the bar moves along slowly all the way to the end, and video never stops with an error. Even if the playback catches up with the bar, it just pauses and waits for more to be loaded (mainly for HQ clips, occasionally).
Thanks again for this "unexpected" YouTube fix
FYI, I'm no longer able to get WiFi on the 108 Nightly. I tried this sequence again and haven't had any luck. Looks like a full wipe/install again.
EDIT: Just turned off the "Network Notification" and it's working fine again. Strange, but it keeps me from having to wipe AND my WiFi is working again. I hope that helps someone else.
Well since everyone is posting what worked for them, I figure I might as well too
I started getting this problem yesterday, never had it in the week up till then.
Problem started when I changed did a factory reset on my Belkin router (yes I know Belkin sucks) and changed the security to WEP (I know, I know, WEP sucks too) so that we could connect to XBox Live with an ancient xbox receiver thing (xbox was hardwired in our old apartment, and I'm not buying a new xbox just for freaking built in wifi it should have had in the first place lol).
Enough in the way of background. Suffice to say, I was having the wifi drop issue on my nook, but the xbox, wii, and two laptops were fine.
Last night I tried flashing back to stable CM7, n108, n106, and n85. No go. Also tried the honeycomb port from SDK 11. No go.
I changed the device name in applications -> development to "android" and turned off notifications when there was an available wifi hotspot. Still no go.
Changed about every wifi my POS Belkin had, still didn't work.
I flashed back to stock 1.2 with no root and no CWM, and wifi was still turning on and off.
I did two things since then and one of two things fixed it; not 100% sure which.
1. This morning I downloaded the software for my router from Belkin and reloaded it. Before I could test it, I had to rush off to work.
2. At work I rerooted, reinstalled CWM, and loaded n110, and when I got home IT WORKED!
Seems most likely to me that reloading the router software is what did it, although it may be n110 that did it.
So anyway, for everyone who is as desperate as I was last night, here's two more things to try.
Here was my fix to my issues
http://forum.xda-developers.com/showthread.php?t=1134675
Sent from my NookColor using XDA Premium App
I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.
quai said:
I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.
Click to expand...
Click to collapse
See if the settings in my above link help
Sent from my NookColor using XDA Premium App
I can say this forum helped tremendously. Editing the Nook hostname fixed my WIFI issues. I have a Linksys WRT610N V1 with WPA2-Personal TKIP/ASIP with no issues now. All I did was make this change... Excellent connectivity now.
This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc
christoophat said:
This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc
Click to expand...
Click to collapse
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App
SCrid2000 said:
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
agreed. NC is charging now, but hoping that this issue is over for good. Thanks for the idea to look at the FW as a solution
Strange. I was using build 120 with my router with no issues, then after a few days it stopped working and would not reconnect even after a reboot. Forgetting the connection and recreating it didn't work either. However making the connection not use AES worked.
Sent from my HTC Vision using Tapatalk