Database Develop

Froyo + WiFi = disabled connections

So ever since I've gotten my Nexus One I've been noticing it drops out of a WiFi way too often. It does it both at home and at work on Wireless routers using the latest firmware. I've set the sleep policy to never go to sleep but most of the times I wake my phone up, I'll find it on 3G instead of the full strength WiFi it should be on. On 2.1 when I'd go into WiFi settings it would show the connection and say something along the lines of "Connection unsuccessful, tap to try again" and on 2.2 it just says "Disabled, Secured by blah blah blah". If I retry, it ALWAYS connects and WiFi will stay active for a short period of time before falling back to 3G.
Is there some way I can tell Android to retry the WiFi connection if it fails instead of just giving up? I've been looking through the WiFi API's on the Android Developer site and I'm this close to writing an application that will attempt to mitigate this issue for me.
If I'm within range of one of my pre configured networks, I want the phone to try it's hardest to stay on WiFi. If it loses connection, retry. It it can't get it after 5 retries, wait five minutes and try it again, don't just give up and mark the connection as disabled.
I've read tons of threads about people with WiFi issues and people always say "it's the router, it's the channel, etc, etc" but my WiFi works perfectly fine as long as there is a human to reconnect it if it drops.
Anyone else in the same boat as me?

ok so apparently I'm the only one with an N1 and a WiFi issue.......

I have the same exact issues.

I have the same issue as well and if it stays on I have to turn wifi off and back on so it will connect properly
-------------------------------------
Sent via the XDA Tapatalk App

same issue here. i had been looking for an app that would force the connectivity, but the market doesn't seem to have it. just a bunch of crappy wifi on/off switcher management apps. i'm surprised that no one has hacked this function or built an app for it.

It's certainly a very annoying problem. Mine will go to known good wifi networks, at work, at home and at other locations where my other devices work flawlessly. I have a coworker with the exact same firmware (we updated using the same file) on a nexus one that has never seen this problem, which I find odd, but I'm fairly new to Android. It looks like a software or driver issue to me, but as I said, I'm new to Android.
My device shows the known networks as "Disabled", but I can connect manually.

Looks like it's worth me coding up an App to fix this then.

what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.

y2whisper said:
what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.
Click to expand...
Click to collapse
2.6.32.9-27220-g328f560
android-[email protected]#1
I've never tried a new kernel.. Is this something I should look into?

I'm running the same kernel.

BootsSiR said:
Looks like it's worth me coding up an App to fix this then.
Click to expand...
Click to collapse
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.

w9ndb said:
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.
Click to expand...
Click to collapse
I'd rather take the time to fix it then wait for an update that may never arrive. Always fun digging into the API anyways

That's cool. I still find it a bit troubling, though, that some devices see it and some don't, using the same firmware, on the same wireless networks.
I guess it could be a board rev. difference or an app conflict or something. ::shrugs::

I have a similar problem. I use APNdroid to keep cellular data off and use wifi, but I continually have to reconnect wifi no matter what if I am not actively using it. Defeats the purpose of push email.
I downloaded APNdroid after checking data usage and finding that with wifi on there was still significant 3G leakage. Especially confusing with wifi set to never sleep and plugged in overnight.
On the plus side, APNdroid has netted me a lot more battery life, I can almost get two days and one night. I almost never use my spare battery anymore.

Just as an additional data point, I am having the exact same issue with 2.2 FRF83 (I had been on FRF50).
It looks to me like it is simply scanning all of the time and never associating with a known network. I'm not sure why it flags them as "Disabled", however.

Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never

safeplayer22 said:
Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never
Click to expand...
Click to collapse
Yeah, it doesn't help, that was one of the first things I tried. Any time I leave and come back, the networks show as "Disabled". It's a frustrating issue in that it isn't consistant. It's 80% fail, 20% work.

I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App

Zapo said:
I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Well, I know fore a fact it's not my access point. I am a network engineer and worked on wireless systems for years and debugging these types of problems is something I'm a bit obsessive about. This stinks of a software or driver problem to me. It could potentially be a hardware revision issue since we have a N1 that works perfectly in all scanerios.
I've tested this with the following access points:
Apple Airport Extreme
Apple Airport Express
Meru
Cisco 1231
Cisco 350
Belkin pre-n
Linksys WRT54G stock
Linksys WRT54G dd-wrt (I forget the build number)
Soekris Engineering running pfSense
All exhibit the same behavior, while my control devices (Apple iPhone 3g, Apple Macbook Pro and a MyTouch 3g running Cyanogen 2.1).
I wasn't aware that this was related to rooting, I'd be more than happy to move back to a stock ROM if that solved my problem. Maybe I'll try that today if I get some time.
Could you possibly post a link to the google forum you're referencing?
I'm currently digging through the alogcat output to see if there is anything interesting in there.

This issue is worse since I upgraded to 83. I'm actually holding off to try CM6 when it comes out to see if there is any better performance there. I'm not sure if he uses updated drivers or kernel that may give better wifi performance.

[Q] Turning on... Error Turning on... Error WIFI bug

Hello guys,
I have wiped my phone, and tried many, many roms, mostly Darky and Docs roms over the last year, and ALL of them have this wifi bug where sometimes my phone connects to a wifi, and other times I have to restart my phone and only then will it connect.
When it does not connect it says Turning on.... then says Error. I press again, it says Turning on again etc. Occasionally it connects eventually after I try again and again, but usually I have to restart the phone first.
Does anyone know why this is and what to do to fix it. It is very frustrating, especially when in front of an iphone fundementalist.
Help much appreciated!
tx
Mark.

i have this same problem
a fix would be so nice.

try different router.
if you have tried different Rom and kernel then it can't be that.
only your router or phone is bad.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**

i find this problem is app specific. if i connect before anything is open its fine. if i open a 3rd party browser in edge data mode then switch to wifi while loading a page this error occurs sometimes. tested with 3 different routers and one sgs phone dxjpe modem

alexanderct said:
i find this problem is app specific. if i connect before anything is open its fine. if i open a 3rd party browser in edge data mode then switch to wifi while loading a page this error occurs sometimes. tested with 3 different routers and one sgs phone dxjpe modem
Click to expand...
Click to collapse
maby its the modem. never seen this before..
**DamianGTO Ultimate kernel. 350MB Ram. 600HZ. all ext2. Steam Rom. Js5**

I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App

icejagans said:
I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
AAH I will try that!
It is not the router, I have the issue on every router I have tried. Ive also verified that Static IP and Dynamic makes NO difference at all to this problem.
I'll report back on the flight mode work-around... a lot faster than rebooting, cheers,
Mark.

Anyone know a fix for this bug?
Gad, at times like this I envy my wife's iphone, which JUST WORKS. My SGS has been spared me smashing it to bits out of frustration on several occasions...
I tried the flight mode suggestion, it does not work. The only thing that works is restarting the phone... which takes ages and Launcherpro has to be forced shut then restarted, media scanned etc etc... and only THEN can I try the wifi again, so its not a viable work-around.
Anything else to try ?
tx
Mark.
icejagans said:
I get the error too. The only fix I found was to enter flight mode and then turn on wireless and then exit flight mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse

hey guys i think im having the same problem.... i got my sgs and upgraded it to stock 2.2... had the problem then even... it connevts to the router fine... but then after like 10 mins its still connected it says but no data is being transferred... doesnt open webpages etc etc...
then i upgraded to darkys 9.2... and im having the exact same problem... only when i restart the phone the wifi works again for a while... then same problem... wifi is connected but it just doesnt transfer any data.... its reallly frikin frustrating having to reboot over and over and wait for everything to load up like someone else posted i think....
apparently there is some allshare thing thats supposed to help but i think thats a diff problem altogether cuz thats for wifi not connecting at all i think... her wifi does connect but no data...
someone needs to fix this issue somehow :S

DrunkFuX666 said:
hey guys i think im having the same problem.... i got my sgs and upgraded it to stock 2.2... had the problem then even... it connevts to the router fine... but then after like 10 mins its still connected it says but no data is being transferred... doesnt open webpages etc etc...
then i upgraded to darkys 9.2... and im having the exact same problem... only when i restart the phone the wifi works again for a while...
Click to expand...
Click to collapse
Hi
Darkys alternative wifi does not fix the problem. But my problem is not exactly like yours, my phone generally stays connected when it connects, where your connection stops working. Mine only becomes impossible to connect without rebooting sometimes. Occasionally it seems switching from STATIC to DYNAMIC or DYNAMIC to STATIC IP jiggs the phone's wifi somehow, and it then works, but often it just says Turning on... and nada!
Yep, a fix is desperately needed.
Mark

Hello
Having the same problem here. But let's just clarify. At least for me, and from the OP's description, the problem is NOT wifi not being able to connect. It is Wifi NOT TURNING ON at all. Takes a LOONG while with "turning on" and then "error" appears. Sometimes trying over and over again will fix it. Sometimes a full reboot, which as someone stated, is a royal pain.

Get this quite frequently. Doesn't bother me too much because it always works after the second time I turn it on (in the settings not in notifications) when it shows "Error".

Couple of things you could try:
Turn off Notifications under WiFi settings
Turn off Use Wireless Networks under Location & Security settings
My Wifi became a bit stable after this.
You could also try static ip addresses.

Had it happen last night. Went into task manager, killed everything that uses internet and retried it. It turned on immediately. Will test more to see if this is indeed a fix. It's still annoying enough, though.

bump
I have this problem for over 6 months. Any fixes anyone????
Maybe its a harware bug. I may take it into a Samsung Store

This still happens to me too...any fix? Is this hardware or something?

Had this issue when I was using SuperPower App where it takes control of the Wifi sleep. Removed it and never had it again. Any one of you using some sort of battery saver taking control of WIFI?

Same problem here
Same problem here on stock 2.2.1 ROM. Like others already mentioned, my problem is getting the WiFi to turn on. Once it is on, it's problem free, but turning it on sometimes takes minutes to only get an error. Mostly trying again, turns it on quickly. But this afternoon I tried three times without succes. Than, after reading a lot of forum discussions on this problem (we are not alone...), I tried turning off packet data and then WiFi turned on in seconds. This suggests that apps having an internet connection open could cause the problem. It also suggests that icejagans is right by stating to turn the phone into flight mode might resolve the problem. I am not running any battery saver, task killer or whatsoever that could cause this problem. Last Saturday I even did a factory reset to see if that helped, but no, it didn't... Getting really annoyed by this problem and I hope 2.3 will fix it!

Bumb!
Please does anyone have a fix for this? Does flashing a different modem help?

When this happens, I go to Allshare app and enable wireless (when asked), it always works

[Q] CM7 Wifi issues

I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?

Have you tried turning the WIFI sleep policy to never sleep?
WIFI Settings>Advanced>WIFI Sleep Policy>Never

Ya but it didn't help!

i was having issues but builds 17+ have been much much better.
no fix that i'm aware of. you could try switching your security settings on the router.

I have seen this and have determined that it could be related to router type and or brand.
See this post.
http://forum.cyanogenmod.com/topic/16323-cm7-discussion-of-nightlies/page__view__findpost__p__157374

I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.

mndev12 said:
I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.
Click to expand...
Click to collapse
what exactly are you replacing with that new wifi folder? did this help others?

I've had problems with a friends nook and my router (mine, same CM7 build, works fine). I'd recommend trying what mndev12 said first, and if that doesn't work try turning off all encryption/security on your router and see if it still happens. From what I can gather here on the forums is that some people are having problems with different security configs.

This might help.
I had the same issue with my NC using a D-Link DIR-615 wireless router. I solved this issue by turning Wireless N off. I set mine to BG only. Works flawlessly. Hope this helps.

Another suggestion to folks with Wifi and router issues. Make sure your router has current/updated firmware running on it. I know we all get in the habbit of setting them up and just leaving them but the mfgs do in fact push out firmware updates from time to time that can and do make a world of difference in cases like these, specially on older routers

basrawi said:
I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?
Click to expand...
Click to collapse
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.

Good suggestion will2live. I haven't updated mine since I set it up. However I think it is a driver issue with the TI chip we have, not a router issue.
Sent from my PC36100 using XDA App

so are youll trying to say that this isnt the issue of cm7?i dont think so...i never had such problems with the stock rom..

Im seeing the same thing - running the encore version and my wifi is all open - drops a bit or takes a while to connect? anyone else?

I loaded the most recent version of CM7 and am having issues with the Nook not finding any WiFi. It worked fine for about 12 hours, but now won't find any access points. I have tried turning off WiFi and back on several times as well as rebooting.
Any ideas on how to get the WiFi to see access points?

Try a clean install? My wifi works pretty well ( I sometimes have to turn off and let it shill for 30 sec) on Phiremod 6.1 (cm7.0.2)

Ryjon90 said:
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.
Click to expand...
Click to collapse
I have had serious wifi headaches myself (with both 7.0.0 and 7.0.2). I have tried each about a dozen times, wiping, different versions of CWM recovery, tried nightlies and always the same. Wifi will connect, I'll start downloading something, and then it will disconnect at some point (may be a minute, may be 3 or 4). Turning wifi on and off brings it back to life but only momentarily. Have no issues with Nookie Froyo or stock. I did try connecting to WEP (other than my usual WPA2) but could only do this by tethering to my phone. It seemed to have fewer disconnects but I did still have issues there. Plus, resorting to tethering or a less secure network is also obviously not really a solution. Really hoping a pattern can be discovered to diagnose this issue because its becoming a deal breaker for me. This issue aside, LOVE the ROM.

[FIX] WiFi connectivity issues with phiremod/CM7

This continued 'dropping and reconnecting' to my WPA/2 has been driving me nuts and I found the holy grail for my problem to share.
During the course of troubleshooting I:
1. updated router firmware
2. changed security from wep to wpa to wpa2
3. hard coded the nook mac address to enabled, even though there was no block setup.....
4. YadaYada.... pullin my frickin hair out then the moment of calrity
When I observed 'connected devices to my wireless I noticed that all other devices in da house had typical host names like laptop1, server1 whatever and the host name for the nook when attempting to connect was, and I quote
'android-873iurhfier98734598'
or in other words a dash with a huge random number/letter sequence that showed up as funky 'alien' ascii characters to the router.
So the fix was:
goto settings
goto applications
goto development
goto device hostname
dropdown to edit and backspace(erase) the dash-----bull****
I ended up with a host name of android
went back to wifi settings, forgot and reconnected and BAM
Done deal.
Hope this helps some of you who are having wifi problems.......
I believe this is related to certain wireless routers being unable to translate the characters into something other then gibberish ascii characters it believes its seeing????
whatever I dont care anymore....

didnt fix it for me....

**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat

yourm0m1 said:
didnt fix it for me....
Click to expand...
Click to collapse
Hmmmm,
I have a belkin N1 wireless router and did update to the latest firmware. I did change several settings during the course of getting my issue resolved as follows:
Radio = 11g
Bandwidth = 20Mhz+40Mhz-auto
QOS = OFF
Authentication = WPA-PSK+WPA2-PSK
Encryption = TKIP+AES
obscure PSK = OFF
hopefully these will help..............

mooja said:
for the love of god and all that is holy, this fixed my issue.
if you were here id give you a beer or something, this is outstanding and i will probably love you forever
Click to expand...
Click to collapse
Easy there big fella.............. glad it worked for you

mooja said:
**edit**
spoke too soon. worked for about 5 minutes and then i was back at the same boat
Click to expand...
Click to collapse
Try the settings I gave in post #4
I have been running consistent for several hours now.....

with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal

yourm0m1 said:
with the .29 kernel and cm7.0.2 i dont have any issues, so i dont feel the need to screw with the router....ill wait or deal
Click to expand...
Click to collapse
I had issues with cm7.0.2/3 stables and phiremod 6.2, .29 kernels until I stumbled on my fix. However this also works well for me with the 2.6.32, beta 3.1.
FYI, I have been running all of these off SD, my emmc is 1.01 rooted and very stable.

Dude, you are a lifesaver. I've been running into this problem frequently and it's sort of a kiss of death for WiFi when it happens and I have to re-do the whole CM7 SD Card. It's working perfectly now though after I just had a card fixed pretty much perfectly.

Thanks for posting this...
I didn't have any connection-disconnection type WiFi problems, but I went ahead and shortened the name to just android. What it fixed for me is the YouTube on Phiremod 6.3. Previously, any clip would stop with an error message. The progress bar of loading the clip ahead of the video playback was moving slowly at the beginning, but then jumping to the very end, and when the playback was at the "jumping point", it was giving me an error. Now, after this "fix", the bar moves along slowly all the way to the end, and video never stops with an error. Even if the playback catches up with the bar, it just pauses and waits for more to be loaded (mainly for HQ clips, occasionally).
Thanks again for this "unexpected" YouTube fix

FYI, I'm no longer able to get WiFi on the 108 Nightly. I tried this sequence again and haven't had any luck. Looks like a full wipe/install again.
EDIT: Just turned off the "Network Notification" and it's working fine again. Strange, but it keeps me from having to wipe AND my WiFi is working again. I hope that helps someone else.

Well since everyone is posting what worked for them, I figure I might as well too
I started getting this problem yesterday, never had it in the week up till then.
Problem started when I changed did a factory reset on my Belkin router (yes I know Belkin sucks) and changed the security to WEP (I know, I know, WEP sucks too) so that we could connect to XBox Live with an ancient xbox receiver thing (xbox was hardwired in our old apartment, and I'm not buying a new xbox just for freaking built in wifi it should have had in the first place lol).
Enough in the way of background. Suffice to say, I was having the wifi drop issue on my nook, but the xbox, wii, and two laptops were fine.
Last night I tried flashing back to stable CM7, n108, n106, and n85. No go. Also tried the honeycomb port from SDK 11. No go.
I changed the device name in applications -> development to "android" and turned off notifications when there was an available wifi hotspot. Still no go.
Changed about every wifi my POS Belkin had, still didn't work.
I flashed back to stock 1.2 with no root and no CWM, and wifi was still turning on and off.
I did two things since then and one of two things fixed it; not 100% sure which.
1. This morning I downloaded the software for my router from Belkin and reloaded it. Before I could test it, I had to rush off to work.
2. At work I rerooted, reinstalled CWM, and loaded n110, and when I got home IT WORKED!
Seems most likely to me that reloading the router software is what did it, although it may be n110 that did it.
So anyway, for everyone who is as desperate as I was last night, here's two more things to try.

Here was my fix to my issues
http://forum.xda-developers.com/showthread.php?t=1134675
Sent from my NookColor using XDA Premium App

I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.

quai said:
I'm not sure if this has been meantioned or not.......I have NO problems when tethering from my phone. Its only when connected to my router. Also I ran a couple of shows from Netflix to see if it would hold a connection from the router. Both shows ran perfect. But as soon as I tried searching on the browser it stopped working. I can then at that point wait it out or disconnect and reconnect. But again it works flawlessly tethering from my tbolt using wireless tether.
Click to expand...
Click to collapse
See if the settings in my above link help
Sent from my NookColor using XDA Premium App

I can say this forum helped tremendously. Editing the Nook hostname fixed my WIFI issues. I have a Linksys WRT610N V1 with WPA2-Personal TKIP/ASIP with no issues now. All I did was make this change... Excellent connectivity now.

This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc

christoophat said:
This is THE most frustrating issue that remains (for me) using the NC . I've tried most everything here at home to get a stable continuous connection, and end up failing.
Took it into work yesterday & sniffed out an open wifi WAP there, showed only one bar, yet it connected & played Netflix,Pandora, etc flawlessly.
well, just now reset my router (TP-Link wr1043N) & upgraded it's FW, and it is now allowing Netflix streaming. Holding breath, fingers crossed, etc
Click to expand...
Click to collapse
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App

SCrid2000 said:
Well at least you know it's a router issue, hopefully you'll have the same experience as me, perfect connectivity ever since the firmware reload here.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
agreed. NC is charging now, but hoping that this issue is over for good. Thanks for the idea to look at the FW as a solution

Strange. I was using build 120 with my router with no issues, then after a few days it stopped working and would not reconnect even after a reboot. Forgetting the connection and recreating it didn't work either. However making the connection not use AES worked.
Sent from my HTC Vision using Tapatalk

[Q] Hp TouchPad running Android - Wifi force close

I've tested this with a3.5, Xron and Miui and they all get this problem. Maybe installing certain apps trigger this to happen but wifi will eventually slow down when trying to connect to a signal and will be essentially non functional since the OS will basically freeze and then tell you to force close wifi and it requires a wipe and fresh install to fix.
Has anyone else run into this problem?

Check this and see if it helps you.
http://forum.xda-developers.com/showpost.php?p=20863566&postcount=14

StEVO_M said:
Check this and see if it helps you.
http://forum.xda-developers.com/showpost.php?p=20863566&postcount=14
Click to expand...
Click to collapse
I don't think its the same issue. In those instances you can still try to change which wifi signal you want to connect to, I think it just loops from connecting and it would disconnect. I think this issue is common and dropped connections occur as well.
But I'm talking about a situation where if you even try to enter the wifi options it will force close.

iamsamsamiam said:
I don't think its the same issue. In those instances you can still try to change which wifi signal you want to connect to, I think it just loops from connecting and it would disconnect. I think this issue is common and dropped connections occur as well.
But I'm talking about a situation where if you even try to enter the wifi options it will force close.
Click to expand...
Click to collapse
Before I changed it, it would take forever to get it to release the connection. I just kept hitting "Wait" rather than "Force close" it would take several minutes but would eventually come up and allow me to Forget the network.
It sure sounds like the same, not saying it is, but very similar.

I experienced this problem for the first time yesterday in area where was about 20 WIFI networks. Never ever it happened in my house on A2. A3 A3.5 or XRON2.8
http://rootzwiki.com/topic/13779-now-i-believe-that-there-is-wifi-problem/

I have the same issue today, Wifi setting is forced to close, and cannot connect to any Wifi signals. I think it's a bug and it related to the time or date. Because I didn't do anything and it just happened.
No new apps install, no setting changed, and the device was keep on, so it just happens.
Hope someone can find out where the problem is...so sad this happen on New Year's eve....

i have this problem also, the solution i found was letting the touchpad go dead and than begin to connect wifi again.

Similar wifi comments here: rebooting [or maybe toggling/other disconnect] with wifi on/remembered would get it into a state where it was scanning and connecting over and over without really ever working. this was only happening once it was 'remembered'. Going through the wifi settings to forget in this state involved hitting 'wait' a few times and then i'd reboot and readd. 1st wifi connect is always solid for me.
I've found: market.android.com/details?id=com.brilliapps.wifiandmorefixer
Does the same thing except it is one click. I rebooted after the first go, but now no longer. i run this and then readd wifi - all set.