I just got a pair of Jabra BT8010 for my Tilt and was looking forward to enjoying them but they won't play music for me. The Jabra BT8010 has a regular BT headset that works like any other BT set but it also has a cable you can attach and make it into a stereo headset with another ear bud. You press a mode button to turn on the stereo/music function.
However, the music function of the headset is on and I can control the media player but either the sound plays for about 10 seconds and goes out or no sound comes through the headset at all. Jabra & ATT were no help. HTC claimed that phone doesn't work with this BT set because the device must have a dedicated BT music headset. That sounded shady to me so I decided to check several forums and noticed some people use the same model. I've contacted these people but no reply yet. Anyone have advice on what to do for a fix?
I had the same problem at first. Using the menu on the headset itself, I was able to reset it to the factory settings, repair it with my phone, and it worked just fine after that.
Hope that helps you out.
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
Hello.
I have a problem with my sensation.
I pair the headset, I can hear the other side, but no one can hear me.
This, until I select speakers and returns to bt
Any idea?
Thanks
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
I've recently purchased a lovely headset from XiaoMi for my Huawei P20Pro.
It's Mi ANC & Type C In-Ear Earphones. Model: JZEJ01JY.
It has lovely audio and works fine with most of the features except...
When I made calls, the headphone will not hear any sound at all. no dial tone, not even when someone picked up the phone on the other end.
I noticed a quick fix for this error is to turn on the handsfree mode when you made the call; after you hear the sound from the handsfree mode, turn off the hands-free, then the sound will start coming in through the headset.
Another option is to wait until you hear the dial tone then only plugged in the headset.
It is not quite ideal considering the hassle of having to do so.
The error was so niched that I could not find generic help online at the moment.
Anyone shares the same pain or could provide some help here? Thanks!
Sounds like a compatibility issue. Use the stock earphones and check of the problem also persists.
Same problem with stock headset
Hi, same issue with the original headset that came with the P20 phone. Same clumsy solution. Have you solved it?...