Morning All !!
Currently i have the HTC fuze (AT&T) aka Diamond. I just purchase the sony bluetooth headset DR-BT160AS. I have tried everyway possible i can think of to get more sound out of these headphones. It sound like im listening to music threw a bottle next door in MONO. I tryed adjusting the preset ( audio booster) with the help of tweaksdiamond. Nothing but here the knock why is it when i have the audio adapter plug into the phone i can get great sound and adjust the presets, But threw the bluetooth i get mono sound with no adjustments. Its pairs wirless headset, hands free, it work the fucntions of changing the track and adjusting volume and i can recive calls.... but with poor sound.
programs used :
blue audio
tweaksdiamond
Has anyone had this issue using wirless bluetooth stereo headsets w/a2dp enabled.
@LPHAR56 -aka- do you hear me now "HELL NO!"
I have a pair of Sony DR-BT140Q and they work/sound really great every time. They're not the same kind, but maybe yours are defective?
Try pairing it with a laptop or any other device to see if you get the same results
thanks i try to do it with a laptop. if i can see if it just my pair having issues.. just can figure out the issue
I just wanted to buy a stereo bluetooth handsfree for my device and finally I decided to buy an EverE T909s about 40 $...
it pairs correctly and fully to the device and music sound is good... but when there is an incoming call or when i call some one its microphone is so weak and people cant hear me!
I just paired the headset to another phone but it worked properly...
any solution?
I have the same problem. But in my case people can hear me when T909S is connected to the phone (Samsung), not very good, but they can.
What I'm concerned is when I connect this headset to my computer and try to use it for Skype, whatever settings I use the sound from Microphone is always very squeaking and it's impossible to use this headset as my headphones in Skype...
Any solutions?
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.
I am having issues when I am connecting my k20 pro with my car's Bluetooth for answering phone calls. The Bluetooth gets connected and music plays using Bluetooth without any issues, but the call volume output doesn't come from the Bluetooth. Has anyone else face this issue?
Anand_theGeek said:
I am having issues when I am connecting my k20 pro with my car's Bluetooth for answering phone calls. The Bluetooth gets connected and music plays using Bluetooth without any issues, but the call volume output doesn't come from the Bluetooth. Has anyone else face this issue?
Click to expand...
Click to collapse
Have you installed a custom ROM, or are you on official MIUI?
I know in call Bluetooth audio doesn't work on GSI ROMs.
I am on official miui rom
Robbo.5000 said:
Have you installed a custom ROM, or are you on official MIUI?
I know in call Bluetooth audio doesn't work on GSI ROMs.
Click to expand...
Click to collapse
I am in official miui rom
Anand_theGeek said:
I am in official miui rom
Click to expand...
Click to collapse
I've not seen anyone else complain of this on official MIUI. Have you tried other Bluetooth devices like headsets?
I never stuck with MIUI long enough to try Bluetooth, so there's not much I can suggest.
Robbo.5000 said:
I've not seen anyone else complain of this on official MIUI. Have you tried other Bluetooth devices like headsets?
I never stuck with MIUI long enough to try Bluetooth, so there's not much I can suggest.
Click to expand...
Click to collapse
I haven't tried with any other blue tooth device yet. Let me try it out.
Bluetooth sound breaks continuously while playing audio in car
When i connect my k20 pro using Bluetooth to my car audio, the music breaks continuously, i have tried with other phones but the problem is only seen in this k20 pro, i tried it in another car audio system same problem
I have also the same issue... Problem is with K20 pro.... Reset 2 times but still the problem is not resolved... Most annoying thing that Mi service center can do only Hard Reset as first and last solution...
I have no issues with the audio, issue happened only with the call functions. I suspect it to be a compatibility issue with my car. Since k20 pro has Bluetooth 5g, however my car doesn't have this.
Anand_theGeek said:
I have no issues with the audio, issue happened only with the call functions. I suspect it to be a compatibility issue with my car. Since k20 pro has Bluetooth 5g, however my car doesn't have this.
Click to expand...
Click to collapse
Bluetooth is backward compatible. Like if you have a capable device, it will use all the features the host supports.
One tip: If you go into Developer Settings on your phone, you can hard-set the Bluetooth settings.
Hi I am starting to notice issue on my k20pro on calls .after call is getting connected I can hear the other person but the other person cannot hear me sometime when I connect the headphone people can hear me sometime they don't..I dnt understand where is the problem
Pratz90 said:
Hi I am starting to notice issue on my k20pro on calls .after call is getting connected I can hear the other person but the other person cannot hear me sometime when I connect the headphone people can hear me sometime they don't..I dnt understand where is the problem
Click to expand...
Click to collapse
Is the issue reported by you above connected to the Bluetooth issue of this thread?
Anand_theGeek said:
I am having issues when I am connecting my k20 pro with my car's Bluetooth for answering phone calls. The Bluetooth gets connected and music plays using Bluetooth without any issues, but the call volume output doesn't come from the Bluetooth. Has anyone else face this issue?
Click to expand...
Click to collapse
I'm having the same issue, the audio comes from the loud speaker of the phone.
On the screen on the phone you can see that the audio is connected to the car Bluetooth, you can then select loudspeaker or normal audio , if you swap the audio to a different channel and then revert back to the car Bluetooth it is connecting correctly to the Bluetooth
I am having the same issue
I have redmi k20... Over Bluetooth music is fine, but over call the person can't hear you...
I tried everything.... Restarting my phone, pair unpair Bluetooth, even hard reset my phone... It started working for 2 calls after hard reset but it is again causing problrms
same problem here.
when I connect my K20 to my car via BT, music breaks after 2-3 songs, and car controls (next song/previous song) stop working.
also, when I connect my BT Bose headphones, sometimes sound does not come through (mic works)
anyone found a solution?
drupeyyy said:
same problem here.
when I connect my K20 to my car via BT, music breaks after 2-3 songs, and car controls (next song/previous song) stop working.
also, when I connect my BT Bose headphones, sometimes sound does not come through (mic works)
anyone found a solution?
Click to expand...
Click to collapse
That sounds more like a battery optimization issue. Try turning off battery optimization AND set App battery saver to "no restrictions" for your music player.
I had the same issue with Xiaomi Redmi 9
Hard reset solved it.