Database Develop

[Q] Awaking from sleep mode takes awhile. Normal?

I didn't know how else to title this thread, so I'm hoping this makes sense.
Awhile ago I flashed the CM6 ROM to my Hero. I haven't added much to it, nor adjusted any of the settings. However, when my phone is not plugged in and getting charged, when I hit the End Call or Menu button to bring it from sleep mode, it takes it almost 2 seconds before the lockscreen appears.
I know that a stock Hero will awake from sleep mode almost instantly. And, when I had a previous 1.5 ROM flashed, it took the phone about maybe 1.2 seconds to awake. Is this normal or is there something that I'm missing that is causing this lag? I haven't really installed any misc apps, and I only removed some "bloatware" from the phone (safely, and ones that don't cause FCs).
Any help or suggestions is appreciated.

I know that overclocking a rom adds lag to waking up the lock screen. Did you flash a overclocked kernel or have you had this issue since flashing this rom?

I believe, when I flashed this new ROM, I reverted back to a normal clocking speed. I used to have an OC kernel of 710, but could've sworn I've gotten it back to stock.
Is there a way to get it back to stock speed, if I didn't revert it back, tho?

Bump.
Is there a way to revert the kernel back to stock?

Option
1. If you have OC kernel install, either use setCPU or Overclock widget to set your min and max.
2. If you running ASOP rom, I'm not sure ASOP ROM comes with stock Kernel or OC Kernel. If it come with stock you may just flash the ROM again w/o wiping data, might have to wipe dalvik cache and it should revert back to stock kernel. If it comes with OC kernel, then option 1 would be best.
my .2 cent hope it helps.

Unfortunately, OverClock Widget didn't do anything to fix the problem. :/ And, if it can't fix it, I don't think that paying for SetCPU will fix it either.
Is there a way I can download the stock kernel?

You cab download setcpu for free here on xda or from their website
I forgot what file it is that changes the CPU speed, but I would look into modifying that file. I also have this problem with cm6 8/17 nightly, but did not have the problem with the early test releases
Sent from my HERO200 using XDA App

Thanks a lot, I'm giving it a shot now. I do have a question, tho: when I ran SetCPU, it said that root access was not detected. Is there a trick I have to do with the phone to have SetCPU recognize the phone? I have done some searching, but haven't found much. I tried checking on SuperUser, but it doesn't list SetCPU in it. Plus, when I tap on "Log", it crashes.
Is my phone messed up or something?

[Q] [KERNEL] SpeedMod Captivate [K12T HPCall VoodooSnd4 SharpnessFix STABLE] on I896?

Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!

backdownup said:
but i'm really interested in flashing this rom (will be my first one)
Click to expand...
Click to collapse
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.

MikeyMike01 said:
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.
Click to expand...
Click to collapse
Agreed. Just to be save do alot of reading before attempting anything really lol. There are stickies in the Development section start there.

Ok so I did a little more reading. I896 and I897 are essentially the same. I'm not flashing a rom, just a kernel, so there should be no issue with the 3G problem mentioned in the wiki.
It won't change my rom or anything about the device other then how the filesystem works.
Thanks!

backdownup said:
Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!
Click to expand...
Click to collapse
Hi, I'm pretty new here too, and I have to tell you that know one will give you a straight answer. There's a lot of' tribal knowledge', and it seems that people would rather teach you how to unbrick your phone than to flash it without issue.
First of all, hook up to Samsung Kies and update your phone to Froyo. If you are on Rogers it's an official update, don't worry about flashing any other roms yet.
Next, Use the option in the OLCF to unlagfix.
Next, you will need to root your phone. OCLF is practically obsolete, as the developer does not update anymore. Your best bet is Superoneclick. Read all instructions first. It is very easy and effective.
After you have the phone rooted, you can now install Titanium Backup. This will save all of your apps, contact info, settings, virtually everything on the phone, it will save them to a folder on your external SD. drop and drag this folder to your desktop in case anything goes wrong. I never had a problem.
You should backup your kernel. I used Neldar's SGS Kernel Flasher. It will save your kernel as an 'update.zip' in your root folder. Drag this to your desktop and put it into a folder called 'i897 orig kernel' or what have you, in case something goes wrong. I never had a problem.
Now you can flash SpeedMod. The developer's website, which is linked to in the thread's first post, will walk you though it. You will first need to install ODIN. The SpeedMod developer has a step-by-step on how to flash SpeedMod using ODIN on the developer's page. Make sure you choose a Speedmod Kernel that is intended for the Captivate, not the I9000, and that you chose the one for ODIN, not the ClockWorkMod version. Follow the steps in the Developer's page.
When you have done that, reboot into recovery mode and you should see Green Text. From here you can enable the lagfix and other tweaks. use the volume keys to select the option you want and the power button to select. under the options, it will show you which tweaks you have enabled or disabled.
Remember to select the most stable SpeedMod release, the one that is posted in the Forum (K12U-T4) is a TEST VERSION, hence the 'T'. The latest stable version as of this writing was K12T, as posted in the developer's page. I have had great results with this one.
You may find that you don't need to flash a custom ROM, I have found this setup very satisfying.
Good Luck!

Wow,
Thank you so much clemmie! That's was succinct and very helpful, especially the part about the proper way to back up my stuff.
I uninstalled OCLF just now, and it seems my phone runs at the same speed (aka fast) as it did with the lag fix installed!
Going to flash this kernel tonight or tomorrow, I'll let you know how it goes.
Thanks again!

Good to hear. There would be a lot less smoke and mirrors if people would just be straightforward and post step by step instructions with links, to give people what they want. I hope what worked for me will work for you, and I encourage you to share what you learn as well.

Kernel flash done! Screen is initially very different looking thanks to the amoled mod. Success! Backed up, thanks for all the help.

hey clemmie,
i heard that there's some issues with voice quality due to the Speedmod kernel being initially i9000-based and that it's recommended to flash a i9000-based modem. Are you having any issues with using a stock i896 modem or do you recommend something else?

Yeah, that is true, but I haven't had any problems with the stock modem. The phone works as well in-call as any other I've owned. I wonder if there is a difference between the AT&T build vs. the Rogers build. It seems that it's the AT&T folks that have issues.

Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.

olwe said:
Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.
Click to expand...
Click to collapse
Are you on Rogers? Earlier versions of the SpeedMod kernel had the AT&T splash screen, but newer versions have a simple black screen similar to the stock Samsung boot logo.
Installing the SpeedMod kernel will not change the configuration, apps, or settings of your apps. There are some settings that you can tweak in recovery mode but they are mostly file system tweaks. You will however notice that screen resolution is sharper. Your phone will run smoother and more efficiently with better battery life. You can still flash any custom or stock ROM with SpeedMod or without SpeedMod.

Yes I am on Rogers. However, I can't seem to find the stable version K12T that you mentioned on your instructions from the developer's page.

If you click on the hotlinked 'SpeedMod' in my 'tutorial' post, it will take you to the XDA page dedicated to the SpeedMod revisions. Right now there is a 13A Test version posted, but the latest stable version is now K12U. If you click where it says 'more info and downloads', it will take you to the developer's(Hardcore) blog, 'Tourist In Paradise'. The revisions are listed there. I would bookmark this page and check back frequently, as Hardcore is constantly updating. However, I'll link you to the latest stable release for ODIN, K12U:
https://docs.google.com/uc?id=0B-3n...WJmNTUtZDVmNThmMmNhZTRm&export=download&hl=en

Thanks for that! I just did this and although it didn't show the ATT boot screen, it shows the Galaxy S I 897 screen after the I 896 though. Thanks again!

Glad to hear you had success. Not so hard after all, eh?

After using this for a day or two:
I can't believe how fast my phone is. I thought it was fast before with (and then without) the oclf. I can barely keep up!
Battery life seems improved.
Screen is perfect. The lowest brightness setting is much better and more comfortable for low light usage.
I lost 1000 points off quadrant, but quadrant doesn't matter.
The only real downside is call quality took a hit. It's a bit static-y and echo-y.
I'll look into this though and see if I can find a solution, but if you have any tips let me know.

Looks like you are a candidate for a modem flash. Let me know if you find something that works, there is a lot of info on swapping modems for SpeedMod. Maybe I'll try one too!

Hey clemmie (or anyone), if I want to install voodoo lagfix - how abouts would I do that if the SpeedMod kernel already comes with / is based on sztupy's Universal Lagfix (enhanced) and if voodoo is a kernel itself (unless I'm wrong about this)?

If you flash the SpeedMod kernel, voodoo lagfix comes integrated with the kernel. It's a master of enabling it from the recovery menu.
Sent from my SAMSUNG-SGH-I896 using XDA App

[Q] Lagfix options

I have rooted my phone using the Onclick rooting software, that seems to have been a success.
However, I tried using teh OCLF from market to lagfix it but nothing seem to have happened in the 30mins I let it do its thing. THe progress bar goes full then start again, and does this repeatedly. And after reading around some people say that's now out dated and other lag fixes should be more suitable
So, now that my Samsung G S is rooted, what options for lagfixes do I have?

Hi, im asking the same questions
Hi, i am in uk running stock froyo 2.2, I have rooted my phone using Z4root, but I want to put a lagfix on, I have read that OCLF isnt very good anymore, and voodoo you have to install a new rom and im not brave enough to do anything like that so which is the best lagfix i can use and i have heard about overclocking what does that mean? thanks in advance
can anyone help us please

TheSippler said:
So, now that my Samsung G S is rooted, what options for lagfixes do I have?
Click to expand...
Click to collapse
Besides the fact I dont know whats a Samsung G S and no idea what your ROM version is you could do what I did. But depends on your ROM and SGS version!!!
But its on all your risk. Read manuals and warnings to the kernel and the app. You have been warned (I have done this on 2 SGS mine and my friends till now , he has 2.2 stock rom and I 2.2.1 stock JPY too)
Took the neldar kernel flasher , backed up my stock kernel.
Then flashed the speedmod CWM version with the kernel flasher, kernel you can find in the speedmod kernel thread.
Applied the tweaks and lagfixes (ext4) from the recovery. done
and that was it. btw when you do this, try to run the rom WITHOUT the lagfixes, just with the new kernel so you can easily get back to your stock. If you want more, then go to the recovery ULK options and do the recommended tweaks from there. If you still need it, then apply the lagfixes (always backup and always on your own risk)
kezgez said:
and voodoo you have to install a new rom and im not brave enough to do anything like that so which is the best lagfix i can use and i have heard about overclocking what does that mean? thanks in advance
can anyone help us please
Click to expand...
Click to collapse
Not sure you have to install another rom, but I do not know the the original voodoo kernel . Maybe you could try with the one I suggested up there.Btw there is more kernels to choose from, depends on your Galaxy Version and ROM.
Overclocking is nothing you should be concerned with yet I think there is a pretty big speed jump from stock to custom kernel, then from custom tweaks and also to lagfixes. If you are not satisfied then you can try that. OC should make the phone faster. In my opinion though the 1GHz is enough for the phone. With OC come some risks (heat, battery usage, stability)

Last night I managed to get the OCLF working on the phone and noticed improvements. Now that I have a lagfix working, will OCLF be alright to leave on there? Or do you still recommend going to somethign else? (I didn't quite understand why OCLF is being considered out dated anyway).

Install the new version (2.2.1) and lagfix is of no need anymore.
Completely satisfied with a smooth running Galaxy now.

TheSippler said:
Last night I managed to get the OCLF working on the phone and noticed improvements. Now that I have a lagfix working, will OCLF be alright to leave on there? Or do you still recommend going to somethign else? (I didn't quite understand why OCLF is being considered out dated anyway).
Click to expand...
Click to collapse
Well keep the lagfix you have now. If you wanted try something else you would have to undo the changes you have done till now. If it works and you like it keep it..
To plexat: yes the 2.2.1 it's sufficient in speed.
In my case though I had to do already 2 factory reset once cuz the phone didn't start at all and in time even the 2.2.1 became slow. I installed the custom kernel though just for the sharpness fix but was surprised with the lower battery usage and speed. There is still a big speed jump from stock to custom
Sent from my GT-I9000 using XDA App

thankyou for your help, ive got the kernal flasher and kernal thread but can you just confirm for me what I have to do with the kernal thread sorry but ive not done this before and really dont want to damage my phone thanks again Karen

kezgez said:
thankyou for your help, ive got the kernal flasher and kernal thread but can you just confirm for me what I have to do with the kernal thread sorry but ive not done this before and really dont want to damage my phone thanks again Karen
Click to expand...
Click to collapse
Ok man, first of all. You have stock 2.2 but which phone exactly?
In the kernel thread, is written for which phones it is and also for which ROM.
So if it fits yours. You can try what I wrote you somewhere up. Backup, flash the CWM version etc.
First make sure though if you have the correct kernel for your ROM and phone. AND you shouldn't have any other type lagfixes applied.
Thats kinda all. What you can do if you have root, without any trouble, is backup your kernel with the app. Then verify if other things fit. And you can try to flash a custom kernel.
EDIT: Why are you still on 2.2? I mean UK had as one of the first 2.2.1 and plexat is right. 2.2.1 is faster and smoother as 2.2 ? If you dont have any lagfixes or other custom things applied you should kinda update to 2.2.1

Hi Pagot, I checked I had the right kernel and stuff and YIPPEE ive done it, my heart was in my mouth but i took the plunge and it now says i have the kernel above, it does seem more responsive and quicker although the benchmark still says the same? the reason I have still got 2.2 is because I have a branded o2 phone and they havent released it yet for branded phones and i am scared to try and flash it to 2.2.1 is there anything i can now do to speed it up anymore ie lag fixes and things thanks for your help

Glad it worked for you
Well not sure about upgrading the rom with a custom kernel. Am new at this too . So dont flash a rom yet.
From what I asked in the speedmod kernel thread. It should be safe to put back the stock backup kernel you made with the app and then to update if its out. Thats just for 2.2.1 upgrade for you in the future. The condition is however no lagfixes applied!!! If you have them applied it can and will probably go bad on the update!!!
kezgez said:
does seem more responsive and quicker although the benchmark still says the same?
Click to expand...
Click to collapse
Ok please dont look at the score. Mine is actually worse as on the stock kernel if you are talking about quadrant. They are irrelevant.
If your phone feels right, leave it as it is
If you want to tweak it little more. Get to the recovery and there are some tweaks,should be still safe to make. They are marked as recommended in the ULK options.
I wouldn't suggest yet to apply a lagfix. Try it how it feels now. If it starts getting bad and laggy etc. Then experiment with that. I had a lagfix but reverted back, for me the speed is sufficient how it is now
Since you have now CWM you can even backup your whole phone.
If you dont know how to go to the recovery the 3 button combo. There are many nice tools in the market for that. I personally use SGS toolbox/tools, in it is a shorcut with reboot to recovery.
When you are there. the BACK button is actually like OK so beware of that!!! You navigate with the volume button UP/DOWN and confirm with home or back.

Thanks again, been in and enabled tweeks, just so as I no, I noticed in recovery there is a lagfix option is this where i go to apply this and if I do it how do I disable it if I want to
Also you said I could backup my phone now how do I do this Thanks again

Wow my phone is really speedy now thanks for all the help I've now flashed kernel tweaked and applied lagfix and all is well I've backed up my phone as well
YIPPIE
Sent from my GT-I9000 using XDA App

kezgez said:
Wow my phone is really speedy now thanks for all the help I've now flashed kernel tweaked and applied lagfix and all is well I've backed up my phone as well
YIPPIE
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ha seriously glad for you . One day you have no idea about anything, the next day you run a custom kernel with lagfixes and tweaks.
When you get to it, its kinda not so difficult. (It took me kinda a half year )

PAGOT said:
Ha seriously glad for you . One day you have no idea about anything, the next day you run a custom kernel with lagfixes and tweaks.
When you get to it, its kinda not so difficult. (It took me kinda a half year )
Click to expand...
Click to collapse
How true. Just in case get familiar with Odin. Having fun with flashing by CWM can sometimes result in being stuck. Knowing how to use Odin and having all necessary files on your computer should give you some sense of security.

[Q] Getting Supercurio's I896stock+voodoo to work after SpeedMod

SO, earlier today Supercurio put together something special for those of us in Canada on the i896- a stock Rogers Froyo kernel with voodoo injected into it. Following logic, those of us on the stock Rogers Froyo should be able to have our cake and eat it too: a kernel modified especially from Froyo, intended for the Captivate, with voodoo lagfix but without the need to reflash an i9000modem or kernel. Here are the files:
Kernel: stock Rogers Froyo i896 w/ voodoo injection
Modem: Stock Rogers I896 UXJL1 Modem
Before trying a flash, I unlagfixed and backed up via Titanium Backup.
First I tried the kernel flash. I knew it wouldn't work with the modem, but I flashed it first to make sure there were no issues.
Rebooted into recovery- RED SCREEN
I did not enable the lagfix at this point. Just a straight reboot.
Regular boot screen; Rogers logo; Samsung Splash screen- then everything goes black. The home key buttons will light up and never go out if pressed. The phone stays like this until I pull the battery(I waited 25 min before I gave up).
I have tried various configurations regarding flash order(kernel/modem), I have repartitioned the card, factory reset before starting, everything I can think of, but this kernel won't boot past the splash screen.
However, when I revert to SpeedMod kernel(k13c) everything goes back to normal.
I would have thought I could flash this stock kernel over the i-9000 based kernel with the lagfix on both without issue, clearly I am wrong.
Can anyone see anything in my process that is inherently wrong, or even better would some other brave soul with stock Rogers Froyo be willing to try a flash? I wouldn't bother if this is your first crack at it though.
Thanks in advance to all who can help out.

So after wiping all caches and factory resetting, I get the following message at my Red Recovery screen:
E:Can't mount /dev/block/mmcblk1p2
(File Exists)
Is this important?

clemmie said:
So after wiping all caches and factory resetting, I get the following message at my Red Recovery screen:
E:Can't mount /dev/block/mmcblk1p2
(File Exists)
Is this important?
Click to expand...
Click to collapse
I get that all the time. No idea what the hell it is and have had to manually select my GSM bands when I flash a new rom or wipe dalvik cache since it started. Other then that no problems seem to be caused by it, for me.

Call off the dogs- after I installed the driver package that was included with Odin 1-Click I managed to get a master clear and a flash to the AT&T stock.
I must have spent 3 hours installing different driver packages today.

A shame it didnt work out smoothly. I'd be interested but am far too new to risk the troubleshooting..
Sent from my SAMSUNG-SGH-I896 using XDA App

Well, I have some very good news. This little kernel seems to be pretty special. After getting myself back to Rogers Froyo, I have done a few tests. I am getting very solid Linpack scores of 15-16 mflops and Quadrant Standard scores of 1400-1500. Using CPU benchmark, we have scores of about 725 ms @ 1000 hz and 700 ms @ 550 hz.
These scores are very solid and are about 20-25% improvement over stock Rogers Froyo Kernel.
This is promising as the kernel is a native Captivate kernel and could do a better job of servicing the many Froyo ROMs out there in terms of simplicity and stability.
The stock modem still needs more testing in terms of gps fixes and accuracy and data speeds.
I'll get back to you about those shortly.
If you have thought about staying on Rogers Froyo, this would be a good start for improvement.

clemmie said:
Well, I have some very good news. This little kernel seems to be pretty special. After getting myself back to Rogers Froyo, I have done a few tests. I am getting very solid Linpack scores of 15-16 mflops and Quadrant Standard scores of 1400-1500. Using CPU benchmark, we have scores of about 725 ms @ 1000 hz and 700 ms @ 550 hz.
These scores are very solid and are about 20-25% improvement over stock Rogers Froyo Kernel.
This is promising as the kernel is a native Captivate kernel and could do a better job of servicing the many Froyo ROMs out there in terms of simplicity and stability.
The stock modem still needs more testing in terms of gps fixes and accuracy and data speeds.
I'll get back to you about those shortly.
If you have thought about staying on Rogers Froyo, this would be a good start for improvement.
Click to expand...
Click to collapse
I would highly recommend this Kernel!! All the above benefits, plus fantastic battery life. The stock modem seems fine, although I've had better data transfer speeds and GPS locks from JL1 kernel, but this stock modem is perfectly fine.
Would love to see anyone else's results as well!

I like what I see so far. I am getting 1575 scores on quadrant (I know it doesn't mean much) but overall lag is gone.
I was a little freaked out this morning as the Rogers network was dead here this morning and I thought maybe I had done something with all this to kill cell / data. But everything cleared up after a few hours and I was back to normal.

Outcast, were you able to flash this custom Kernel without the issues that Clemmie came across? Much like phrenicthenub, I'd love to see the performance increase without the current bugs of custom ROMs, but I don't think I'm competent enough to troubleshoot if it all goes to hell.

As long as you disable any lagfixes and return any O/C or U/V kernels to normal you won't have these issues. Everything should work fine.
Sent from my SAMSUNG-SGH-I896 using XDA App

Did you guys do the 3e recovery fix first before being able to install CWM?

Hi guys... So i was trying to get SpeedMod to work with a i9000 modem like JK4, but my bluetooth is always noisy...
Right now, i have:
Latest SpeedMod kernel with LagFix enabled
JK4 Modem flashed.
What do i have to do to get this Rogers Supercirio's Voodoo kernel and modem ?
Thanks.

Elisha, I just took the plunge and got these flashed. Definately do the e3 recovery fix before setting up clockwork or anything else. That was the one part that gave me any trouble, but as soon as I got that sorted, everything went very well.
I'll try to pay attention to how things seem to perform and post my findings. Thanks for the encouragement again, Clemmie.

TheGrub said:
Hi guys... So i was trying to get SpeedMod to work with a i9000 modem like JK4, but my bluetooth is always noisy...
Right now, i have:
Latest SpeedMod kernel with LagFix enabled
JK4 Modem flashed.
What do i have to do to get this Rogers Supercirio's Voodoo kernel and modem ?
Thanks.
Click to expand...
Click to collapse
First you will need to boot into recovery and disable your lagfix. Back everything up with Titanium Backup. Download the files above to your root folder and reboot into recovery again. Using cwm, use the install zips option and flash both the kernel and the modem. Reboot yet again into recovery, clear your caches, then enable the new lagfix in your cwm options. It will take a while to convert your partitions from rfs to ext4, so be patient.
Sent from my SAMSUNG-SGH-I896 using XDA App

Thanks Clemmie,
I disabled LagFix from cwm and the speedmod kernel, rebooted, flashed modem with original JL1 modem, and then reflashed kernel with stock rogers froyo. backed everything up with Titanium backup. So i am currently back to stock, with a backup.
cwm is not in my recovery menu now, so if i use ODIN to flash the .tar version of supercurio's stock+voodoo kernel, does it contain cwm ?
ODIN with this kernel should work and then enable lagfix on first reboot by converting to ext4 right ?
Thanks alot, i am just starting with all this and want to make sure i understand everything before i take the plunge.
Thanks.

TheGrub said:
cwm is not in my recovery menu now, so if i use ODIN to flash the .tar version of supercurio's stock+voodoo kernel, does it contain cwm ?
Click to expand...
Click to collapse
Correct, it does.
TheGrub said:
ODIN with this kernel should work and then enable lagfix on first reboot by converting to ext4 right ?
Click to expand...
Click to collapse
Also correct.
Sent from my SAMSUNG-SGH-I896 using XDA App

Thanks ! i'll try that a little later... i'll let you know how it goes...

Well, so far, this Kernel seems to be the best thing to ever happen. I consistently get a score of 1501 in Quadrant standard (not from a fresh boot or anything, and running beautiful widgets and things, so I don't know if that makes a difference. I know with most benchmarks you're meant to close as much as possible, etc) and things just seem to be nice and smooth overall. On top of that, the battery life is, all of a sudden, seemingly PHENOMENAL! All whilst using the stock ROM. Either one of those benefits alone would have made the flash worth it. This is the way this thing should have run from the beginning.
I'll test out how well the GPS works, and try to pay attention to my signal strength with WIFI and calls and report back.

Thanks I figured as much as I had to do the 3e fix after I accidentally upgraded to the official Rogers Froyo the first day I got the phone.
Shroff said:
Elisha, I just took the plunge and got these flashed. Definately do the e3 recovery fix before setting up clockwork or anything else. That was the one part that gave me any trouble, but as soon as I got that sorted, everything went very well.
I'll try to pay attention to how things seem to perform and post my findings. Thanks for the encouragement again, Clemmie.
Click to expand...
Click to collapse

Ok, so i have used the tar version with ODIN3 v1.52 to flash stock+Voodoo-Froyo-I896-UXJL1. As i said, i was on stock kernel with stock JL1 modem.
Flash went great, took about 5 seconds, then rebooted. First reboot took about 7 or 8 minutes with a robot voice telling me the different steps it was in...
Everything workd without hickups... This kernel works realy well and speed is definitely there !
Thanks for the help guys...

[Q] The SpeedMod and Samsung Captivate

I recently installed the SpeedMod for the Samsung Captivate. I went by the step-by-step instructions it gave me, downloaded Odin, and download the TAR file that contained the SpeedMod. I installed it and my phone successfully rebooted. The start-up screen was different but otherwise everything seemed faster when booting up. I went to double check to see if it really installed but under the kernel version it still said 2.6.32.9 . Is it suppose to say something about the SpeedMod? It said it would on the step-by-step instructions.
I also installed Voodoo for the sound problem before I flashed this kernel. Before it said I do not have the right kernel. After installation it has let me choose various options which leads me to think that the SpeedMod is installed. But it still does not say it under kernel version.
I am new to this and still do not fully understand everything. I am just learning as I go along. If anybody has any questions just let me know and I'll do my best to respond back and I can quickly understand this.
Firmware: 2.2
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
Anymore information just let me know.

lol ... thanks..??

polynesianroots said:
I recently installed the SpeedMod for the Samsung Captivate. I went by the step-by-step instructions it gave me, downloaded Odin, and download the TAR file that contained the SpeedMod. I installed it and my phone successfully rebooted. The start-up screen was different but otherwise everything seemed faster when booting up. I went to double check to see if it really installed but under the kernel version it still said 2.6.32.9 . Is it suppose to say something about the SpeedMod? It said it would on the step-by-step instructions.
I also installed Voodoo for the sound problem before I flashed this kernel. Before it said I do not have the right kernel. After installation it has let me choose various options which leads me to think that the SpeedMod is installed. But it still does not say it under kernel version.
I am new to this and still do not fully understand everything. I am just learning as I go along. If anybody has any questions just let me know and I'll do my best to respond back and I can quickly understand this.
Firmware: 2.2
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
Anymore information just let me know.
Click to expand...
Click to collapse
you certainly have speedmod kernel. the new version may not have the kernel version changed to show what it is but there would be no other way for the voodoo sound driver/module to get installed. you should also be able to get into cwm recovery now instead of 3e

Dani- What did you mean by your last line? What's 3e?
Truesselo - ? What

have you tried to make a phone call on that setup? my guess is that voice no longer works now because you didnt flash an i9000 modem to go along with the speedmod kernel

Phone calls work. They sound better actually due to the SpeedMod or Voodoo.

Did you actually go into the cwm menu and enable the tweaks and also enable your filesystem to write ext4>rfs? There is more under the hood that what you get out of the box there.

Did you actually go into the cwm menu and enable the tweaks and also enable your filesystem to write ext4>rfs? There is more under the hood that what you get out of the box there.
Click to expand...
Click to collapse
other way around rfs to ext4. but hes going to need more info than that.
boot into recovery! shut off> hold both volume buttons> then hold power> count to 3 AFTER the screen comes on before you let go.
now you are in speedmod kernel clockwork recovery! (dont use rom manager anymore if you did)
go to clockwork options > lagfix options > enable lagfix (convert to EXT4)
and select covert system to EXT4 > Yes
back, back
reboot
yes (let it do its thing and reboot)
yes (let it do its thing and reboot)
lagFIXED!!!
you will have to re-root! but theres an option in your kernel for that too!!
wait.... look in the CWM/ onix idiot guide in my signature. i made it! different color/ kernel but same options...

Thanks for the info! I actually tinkered with it and did exactly what you all stated on the recovery menu. I am actually master clearing everything now and going with serendipity 6.4. I am pretty sure SpeedMod will work with it? Right?
But I appreciate all the info. If SpeedMod is compatible, what settings do you recommend i tweak it to? I heard different things, but I want to know what you all think since you all know what you are doing lol. Plus, I've heard that JuiceDefender would be a good add-on to download?
Sorry for the questions but I'll learn quick and be up where you all are at soon......

Serendipity has speedmod already cooked in.
all of the previous mentioned tweaks are recommended
Juice defender imo doesn't help.

Stay away from juice defender it's not needed on 2.2 roms. That was good for 2.1, but not so much any more.
Sent from my SAMSUNG-SGH-I897