Hello,
Im living in Czech Republic and I do have one I9000, and I would like to root it.. I have seen many guides, tried some 1-click roots (two methods one z4root and other one is by the update.zip, but that didnt worked because of unsigned file), none of them worked so I checked normal method, and there are some "CF ROOT PACKAGES" with some codes like JP6, JPO, JPU,.. etc. BUT..
I have this in my KIES:
PDA: JPF / PHONE: JPP / CSC: JP8 (The phone is 2.2 android)
I can't find this anywhere, any help? I dont know what to do :/
Did you try this one ? http://forum.xda-developers.com/showthread.php?t=803682
Related
Hi all,
Me and myfriend have the same galaxy s, and we did next...
We wanted to enable 3 button combo, and DID NOT READ ENOUGHT so:
A month ago, on my phone we changed registry of kies, so kies thought we are in Canada, and sucesfuly updated frimware trough kies.
Than we realized that I have Canadian Bell frimware, which is not fuly suported in our country, and tried to rollback frimware.
In midtime, I tried *#272*hhmm#, and used option BMC, whitch preconfigured my phone, like I bough it in Bell. WTF, i had bell app on my phone...
Than pain started.
I was playing with odin.. Tried several frimwares, had some serious issues with signal reception ( in area with 2/3 of signal strenght, had no signal), market did not work, or did not wont to download anything..
******
Bricked phone several times
******
Whic by the way, proved me, that this phone is fabolous, because it is sofware indestractuble... (ONLY THING TO WATCH OUT ---- FULL BATERY, AND ENABLED 3 BUTTONS COMBO---)
And after few days of resarching, used ROMmanager, backuped friends Galaxy S, put in my phone, used backup, and evrything works fine.
EXCEPT
PHONE: I9000XXJM1
I have on my phone PHONE: I9000XXJG1
Does have enybody an idea, where to take I9000XXJM1, from friends I9000, where on his phone could it be found?
The problem is, that baseband version and PDA/CSC do not match, and kies regpatch does not anymore work.
On my phone, I have:
PDA: I9000XFJM3
PHONE: I9000XXJG1
CSC: I9000OXFJM1
and I should have:
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
P.S. I used again *#272*hhmm# set the sealer code VIP, sealers code is fixed, but baseband version is still unchanged.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
You will have to register if you have not done yet, but you can find the firmware your search for there.
Also, you didnt "brick" your phone. Bricked means its broken, wont turn on, wont allow to be flashed and is a paperweight and needs some kind of hardware replacement. I would use the term screwed up the phone, or hooped it, or f'd it up But bricked is the incorrect term
Cheers!
Tnx for the try, but i need
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
I looked there and there is no I9000XFJM3...
My question was, if u have on your phone
PDA: I9000XFJM3
PHONE: I9000XXJM1
CSC: I9000OXFJM1
can u take PHONE: I9000XXJM1, and put it on another device, I managed to do it with PDA and CSC..
I got one of the Brazil/LatinAmerica I9000T phones running in the US/AT&T 3G:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
Im concerned that upgrading may screw up my radio files. My phone has the 3 US/AT&T 3G bands 850/1900/200 that most of the I9000s dont. Can I just upgrade the PDA to a 2.2 ROM and leave the PHONE/CSC as is? If so can I upgrade that PDA to ANY ROM?
Im also concerned that since I have the latin american phone with brazil firmware on it, and it says on bootup that its a I9000T but its not the I9000B model that the MUST READ describes as a brazil model... So Im not sure what all pit files and ROMs that are safe to use.
Optimally, when I do upgrade to 2.2, should I try to use a MODEM and CSC file from the US/AT&T/Captivate 2.2 files, and use whatever PDA ROM I choose? That seems in my head to be what to shoot for but I'm still figuring things out here...
Also, Im confused... these ROMs Im seeing are installed via update.zip, not by the ODIN method. Will I screw up my phone by installing these update.zip files?
Is there a free method to totally back up my PDA/PHONE/CSC into individual files that could be restored later?
Hello Friend.
I have the same version of phone, and I´m looking to for "original" firmware.
You've got the original firmware?
Did you guys found a solution for.. i also have the same version...
Hello everybody
Have you guys loked here?
http://forum.xda-developers.com/showthread.php?t=907701
I downgraded to 2.1 with the i9000T stock rom
Now that 2.2.1 is out for the i9000HKTTTT (i9000TUBJP9), I wanted to see if KIES would now work. After downgrading to 2.1update 1 using ODIN ,everything appears work fine on the phone. I tried updating to 2.2.1 via KIES and still get the message "This Device's version can't be upgraded" . I tried this on a few different computers with KIES 1.5 & 2.0 and no luck.
I did do a Factory reset *2767*3855# , but still no luck.
All information on the phone appears to be OK for 2.1 update 1.
I did notice in Kies if you apply the Registry Patcher and use code CWW, you will get a different message which shows that it's currently up to date. Maybe meaning, Jamaica has not received their updates yet.
Any ideas. Very frustrating. Just trying to get this phone back to stock so it can receive updates when I give to another family member.
GT-i9003
By any chance any one have a link for the latin America Stock rom for the I9003... I write in this tread since is the closer one I found about LatinAmerican Roms.
It sims there are only Europeans, Asians, Arabic and the US rom.
I installed every one and each of them. the signal was fading in and out, and I was only getting edge.
so any one with the I9003 Latin america Stock Rom?
hi there,
i used the reghack with kies to update my galaxy from android 2.1 to 2.2, originally the infos it gave was: JP1 JP1 JP2, now it
is: PDA: JPO, PHONE: JPP, CSC: JP3
btw, im in austria, and it seems that my phone now thinks to belong to another country, as it says "R" (i guess for roaming, cause i had to enable data roaming to use data transfer lol)
does anyone have an idea how i could get that repaired?
greets
Sorry folks, tried reading the similar type threads and I'm missing something..
Kernel Version
2.6.29
root SE-S603 #2 (removed at sign cause it comes up as external website-strange)
Build number
ECLAIR.XWJM9
Firmware
PDA : I9000XWJM9
PHONE: I9000XXJM4
CSC: I9000OXAJM1
2.1-update 1
Purchased thro' orange, and unlocked, don't think it's branded so someone may have updated it previously. (I bought phone ebay)
Using RegEdit
ProductCode GT-I9000HKDORA
Tried changing to O2 etc using some of the key mentioned, using as follows
Connected phone, using Kies (Phone setting)
Opened KIES (on PC)
Tried upgrade, but it comes up with no upgrade possible
Model Name: GT-I9000
Version PDA:JM9 / PHONE: JM4 / CSC:JM1
reviewed orange website and it looks like it can be upgraded if you use Kies, so I'm not sure what I need to do... Don't want to root at moment, in case I brick it..
thanks in advance your your advice...
Hi Bill. I'm not familiar enough with Eclair ROM codes to be 100% sure but considering the phone came off eBay I would suggest that someone has manally flashed it to a non-standard ROM and this would be why Kies doesn't offer you an upgrade. Your options to fix this are (i) to fool Kies into thinking it's a standard version which will make it offer you the official Froyo update or (ii) join the the happy flasher crew (like me) and flash a newer ROM yourself with Odin or Hemidal (being a newbie I recommend you use Odin). Have a search in the SGS forums for info on both how to fool Kies and also how to flash ROMs with Odin. One word of warning, the v2.2.1 ROMS have a serious battery drain issue so it's best to flash a straight 2.2 ROM for now until Samsung release a 2.2.1 with this issue fixed.
Thanks for reply does that mean if i have the superuser app already its been rooted. If so i have ver 2.1.3 do i need to update or it that ok to use. Thanks in advance..
I bought 2 unlocked i9000T's . I've kept one with 2.1 and have been waiting for the official 2.2.1 release via KIES which is now available.
My other unit was updated to 2.2.1 with the Registry Hack. What's the best way to get my Hacked i9000T back to factory so it can take updates as they roll out?
I've looked for the i9000TUBJP9 firmware to load via ODIN but no luck. I use ODIN on my TAB.
Any help would be great.
The i9000T is the latin america version.
thanks
The latin american version is the i9000b
You can get 2.2.1 by either flashing it directly with odin or flashing back to an older stock and then updating with kies
Sent from my GT-I9000 using Tapatalk
GT-I9000T need stock firmware
I have 2 of these phones. Part # GT-I9000T . One has been updated to 2.2.1 via KIES to I9000TUBJP9.The other phone was Flashed with Euro 2.2.1 rom. What's the best way to get the I9000T back to stock. I can't locate the I9000T firmware on Samfirmware.
Just need the download link and will use ODIN
thanks
3dadd said:
I have 2 of these phones. Part # GT-I9000T . One has been updated to 2.2.1 via KIES to I9000TUBJP9.The other phone was Flashed with Euro 2.2.1 rom. What's the best way to get the I9000T back to stock. I can't locate the I9000T firmware on Samfirmware.
Just need the download link and will use ODIN
thanks
Click to expand...
Click to collapse
You should be able to go back using kies 1.5 and kies patcher. Then you would go to Kies 2 to get the latest update. If this doesnt work for you I have an old eclair that I think should work with this phone, you can use that as a base to jump to the latest version.
btw could you please post the modem that came with the update? It´s easy, on the phone you already update you download Terminal emulator then in the program enter:
Code:
dd if=/dev/block/bml12 of=/sdcard/bml12
This will copy the modem to the sdcard. Á lot of people will apreciate it! let us know how it goes.
I downloaded terminal emulator on the 2.2.1 i9000TUBJP9 phone and the command gives me an error:
cannot open for read: no such file or directory.
Does it require root? Since this is a new & stock phone was not planning to root it. I will root my 2.1 once I get it upgraded to JP9
The 2.1 Eclair version I'm running again is.
Baseband:
I9000TUBJH1
If you have a different i9000T firmware to try with ODIN that would be great. The older version of Kies 1.5 patcher did not work. I tried all if the i9000TUB settings CWW, PCW, TTT, and several more.
Once I get this phone to the version as my stock 2.2.1 I'll root it and get the modem file - no problem.
Are you sure you typed it correctly? I was under the impression it did NOT require root. I´ve done it on mine but Im rooted. Special attention to bml12, thats B-M-L-1-2 (just in case)
I dont have the rom around in this machine but luckily I saved the download link
I900T
I think this is exactly what you´re looking for.
If possible when you are upgrading the phone via kies you can try to save the entire rom. There are instructions in the kies patcher thread in the first post on how to do it. But the modem at least would be great.
Good luck.
Any luck?
Sent from my GT-I9000 using XDA App
Thanks for the link, but that's the same file I have here and loaded on the phone. KIES 1.5 won't update it. It's been Pretty frustrating. I'm not sure what KIES is looking for.
You need kies 2. Install the latest version. Kies looks at your product code and current firmware version. Make sure toi change your csc region to TTT also just in case.
To change your csc in 2.1 enter *#272*hhmm# where hh and mm is current time of phone. Change to TTT. Beware this will reset your phone.
If you need more help let me know.
Sent from my GT-I9000 using XDA App
If all else fails you can try spooffw, you can find it in the forums. But you can try what i posted above first. To add to that nake sure kies is reporting your product code to be TTT.
Good luck.
Sent from my GT-I9000 using XDA App
No luck yet.
Changed product code to TTT using the *#272*HHMM# method.
Using KIES 2.0.0.11033_25 and no luck
Tried the 1.8 patcher and set to TTT which spoofs PDA:JG5/ PHONE:JG7/CSC:JG4 (TTT)
Is there anything on the phone to reset. I tried factory reset under the Security option.
What product code does kies say you have? The code i gave does not change the hw product code, just CSC region code.
Patcher 1.8 wont help you, disable it.
Sent from my GT-I9000 using XDA App
If this isnt working i think you have a 2 options. 1. Try spooffw or 2. Root both phones. Backup efs folder of the 2.1 phone. Make nandroid backups of both phones. Then restore nandroid backup from your updated phone to the other. I believe this would work.
Sent from my GT-I9000 using XDA App
Tried my best. Good luck man.
Sent from my GT-I9000 using XDA App
I have done the Spooffw which works great for all other firmware than TTT. There are no i9000T codes on it.
The Spooffw is a very cool and easy way to do this - just need the i9000T codes.
3dadd said:
I have done the Spooffw which works great for all other firmware than TTT. There are no i9000T codes on it.
The Spooffw is a very cool and easy way to do this - just need the i9000T codes.
Click to expand...
Click to collapse
Product Code: GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUBJG4
I'll work on it today again. No problem getting the phone to Euro firmware XEU. KIES updates it no problem. Tested it on several different compters and KIES was no problem. The SPOOFFW method does work. It would be great to have him add the I9000HKTTTT.
Here's the codes I tried to enter inthe SPOOFFW manually:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
The SPOOFFW will accept the info , but KIES never connects to update - The phone won't connect as it should. If you leave it on long enough, it will connect with no firmware info.
This made me think that SPOOFFW had additional data in it's preset info.
I'll keep trying for the I9000T TTT
After you spoof check that everything is set with *#1234#
Sent from my GT-I9000 using XDA App
Yes I checked with *#1234# and it checks out.
It's more an issue of connecting to KIES after it changes the Productcode to HKTTTT.
Here's my steps:
Check Productcode is:
I9000HKTTT
Manually enter:
PDA: I9000TUBJG5
Press OK
Reboot
Manually enter :
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4 (I don't think it's I9000TUBJG4 - I think there are 2 "UU"
Press Home key
Connect to KIES
Phone tries to connect, just says Connecting.....
I wait 2 minutes. Sometimes phone will mount after 2 minutes but Firmware areas is blank.
I go into RegEdit and delete DB Folder info and connect to KIES again. Same result. Makes no difference if I quit KIES and delete the DB folder or do it live.
I'm running KIES on a few computers so I can uninstall and check on various things with the install.
If I delete everything and use one of supplied Presets with SPOOF FW , then everything works fine.
It's almost like the i9000HKTTTT and PDA, Phone, and CSC are not matching and KIES gets lost and is not sure how to proceed.
For the csc im opretty sure its 1 U
Before deleting DB i would shut down kies and disconnect phone.
Also in pretty sure it makes no difference if its a preset or not
Sent from my GT-I9000 using XDA App