Database Develop

Keeps rebooting after Darky 8.1 update

Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.

Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)

worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...

Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.

stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...

I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.

...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."

yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise

anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje

cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing

http://forum.xda-developers.com/showthread.php?t=819551
jje

Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.

http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje

[Q] Rogers phone soft bricked build 11.02

Hey guys, hopefully someone is able to help . I recently soft brick my friends phone without realizing that Samsung have changed the build number on this phone. This is also a nice warning for those of you who are about to use odin to flash.
Build #11.02 number found under battery Rogers Phone.
Flashed with odin using pit and tar file = fail. Reason for flashing was to get it to Rogers stock 2.1.
3 button is not working, I get the phone and computer screen.
I have try the Jig and it also put the phone into download mode. I get the phone and computer screen instead. The Jig however does work on my phone build #10.12 also a rogers phone.
What I may think Samsung may have done was change the jig setting and I have no clue on which pin to touch without frying the phone (if what is possible?).
If anyone with more experience or could shed some insight on how I can go about fixing this problem please do not hesitate to leave a comment.
Thank You
Bui.

which stock did you use? the one in my sig?
also the 11.02 phone, did it come with 2.2? i have talked with 1 IN-experienced user that had a 2.2 phone that would not boot with 2.1. they had to flash 2.1 then the 2.2 overtop to get it to work, but once again it was a noob and may have been another issue.
ok to try to get back to download mode:
take out battery
plug in usb
hold both vol buttons
put in battery
flash again, odin sometimes fails without reason but will work another time...

I did not use the one you posted and it did come with 2.2. I used the one that worked for my phone build #10.12 which did not worked. I was also assuming he had the same build as I. After I realized that and try using the Jig and notice all fail also. Not sure what is up at the moment.

I have try all the download mode that is possible on the forums to get my phone into download all has fail. I still get the phone --- ! --- computer symbol.
I also try using the Jig I build on pin 4 and 5 and still nothing. The total resister is 301k ohms if anyone has simular problem and manage to get their phone into download mode please post your result as many other may also have simular problem.
Thank you
Bui.

Solution
Hey,
I have the same 11.02 build number Rogers Captivate and would like to try a custom rom but I'm holding off until I know it can be recovered should a problem come up.
Have you found a solution to this problem yet?

[Q] Bricked And JIG is not helping

HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE

I have the same issue. I was tryint to load Cognition and it just gets stuck on the ATT screen but I haven't tried a jig yet. I was wondering if I can replace the files on the phone with good files that aren't corrupted and see if it boots up because droid explorere can still pick up the phone and so does Odin but when I do a master reset nothing happens.

@rajasekhar - Have you tried: Removing all parts (battery, sim, sd) let it sit for a few min (my preference is around 10 min to insure no residual power is left in the system) then hold the jig in place and putting the battery back in? Keeping the jig in place, so that as soon as the device gets power it is immediately seeing the jig, before it can try any other processes.
A bit difficult to do with hand made jigs I know. If you still getting nothing then your in for the worst and the phone need a JTAG or service center visit.
Tho it sounds a little odd that it could boot up to seeing the AT&T logo, but does not respond to the jig. Might even be a hardware problem.
@i3oots - Since you say your still getting PC response your safe to try and reflash it or just pick something different altogether. Tho you might wanna let ODIN settle and just sit there doing nothing for a few min, w/o then w/ the phone plugged in. Or learn about Heimdall and go that route.

Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.

rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
You have probably Hard Bricked your phone. A JIG will not work to recover the phone. If the phone has any life at all, then the JIG will work. Else, u hard bricked it...you should never remove the usb cable when flashing bootloaders or odin or anything!
the only solution is to get a JTAG which can recover hard bricks OR you can go to a warranty store (don't know about india) and make up a sob story and have them replace it..

rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
Does your computer recognize the phone? If odin is open, does the box turn yellow when you connect your phone? Make sure you have the right drivers. I think cm7 and captivate drivers are different. Keep trying with the jig. Just because you can't see anything on the screen doesn't mean the phone is dead.

i3oots said:
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
Click to expand...
Click to collapse
If your phone is booting up far enough to send out USB info for ODIN and other PC programs to see it, then your still in a workable condition. This also means you can still get into download mode, but since things arn't working properly it will be harder. Depending on which bootloaders your phone has will direct which methods you'll have to try out to get into download mode.
AFTER you've had a chance to look around the forum and self-educate on the different ways of getting into download mode. If your still having problems give us a lil more info of what you were running before the flash and to which version of Cog you were trying to flash.

Did anything worked for you, if not only a jtag can help you looks like u hard bricked the phone.

Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today

bricked maybe not
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU...... ................................................. I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cant find the original post
rajasekhar19489 said:
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
Click to expand...
Click to collapse

rajasekhar19489 said:
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Click to expand...
Click to collapse
If you just wanna know a bit about the process ask this guy. He is pretty much the only person in the US (I know not all to useful to a person in India) that does JTAG for the cappy.
I can tell you this much, it requires a special device called a Riff box and it sends boot info directly to the chip on the main/mother board that is used for the booting process.
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.

malebornin69 said:
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU......
Click to expand...
Click to collapse
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..

DaNaRkI said:
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
Click to expand...
Click to collapse
Thanx DaNaRkI .. hmm well i would now again start digging the threads for seeing wat u have suggested ..

rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
hello brother,,
u can find the Jig here in india... i also purchased... and it worked for me..
Download-Mode-USB-Jig
press thanx if it helps..

rajasekhar19489 said:
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
Click to expand...
Click to collapse
Hope it helps I wish I could find the original post again to thank the guy that told me how to do it. I had sent that phone back to att and the promptly sent it back and told me the water dammage sticker in the bat compartment was missing and they wanted to charge me 409 bucks for the phone ....long story short it was there when I sent it and I told them to go pound sand up their ass because I wasnt paying them that much and ended up paying 125 bucks for a paper weight.So that is when I decided to have it jtaged but figured I would give it one more shot before mailing it off. That was when I found the post from that person and low and behold it worked........................... I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cat find the original post

malebornin69 said:
Hope it helps
Click to expand...
Click to collapse
Buddy tried it ... Thanx for that..But dint help . Now going for another options i mean in search for other options
But ppl help me with JTAG thing and its users(or developers) availability in india

Forgot to mention
I Missed to explain my flashing procedure i have done this time . Like I never tried flash a boot file along and so was reading some threads about boot loader variations between FROYO and GINGERBREAD so i tried flashing ablong with boot loader and then I got the stock gingerbread file i put the boot loader SBL in heimdall Firstboot loader path .And Boom the first reboot got stuck and i removed the battery and then again when i tried to restart the phone is dead
Thinking this might have where the whole thing went wrong and made the cell dead .

Captivate suddenly not detected by PC

ok first off I have searched and have yet to find a sollution. So if there is one please flame me and point me to it.
Problem : I have 2 computers, both win 7 x64 pro. my desktop does not detect any cell phone, my friends droid 1 or my samsung captivate..... Both have all the drivers installed. That is a small problem because i have a laptop that does ( DID)
Big problem : phone having problems, me flash captivate and flash fail ( i think i used odin 2.2 flasher which for some reason doesnt want to work, i tryed it a few times before... but anyways so I'm in download mode and now the computer wont detect my phone, just like my desktop, I get the UNKNOWN USB device or the usb device did not install correctly blah blah blah malfunction... SO now I'm able to get into DL mode but thats it.... so where is the fix for this? Please help . its so strange that no changes were made and it goes from having worked for months to not working at all suddenly...
Again neither odin v 2.1 or v 2.2 ( as in froyo and eclar) will detect phone nor will the hemdol program or what evs.... so i can not boot past download mode. Please help .

the answers are out there... itll just take a bit of reading... however sounds like there are program incompatibilities somewhere not allowing your drivers to install especially after you said drivers did not install blah blah. Also try changing usb ports when you plug it in and go through and check to make sure all you usb drivers and ports are functioning properly. Furthermore check to ensure your charging port isnt loose and or pins bent or broken same with your cable.

try this as well... says right click and run odin in admin etc.
http://forum.xda-developers.com/showthread.php?p=16936821#post16936821

xbadwolfx said:
try this as well... says right click and run odin in admin etc.
http://forum.xda-developers.com/showthread.php?p=16936821#post16936821
Click to expand...
Click to collapse
Also use XP service pack 2 mode. This helps also.

JJ133169 said:
ok first off I have searched and have yet to find a sollution. So if there is one please flame me and point me to it.
Problem : I have 2 computers, both win 7 x64 pro. my desktop does not detect any cell phone, my friends droid 1 or my samsung captivate..... Both have all the drivers installed. That is a small problem because i have a laptop that does ( DID)
Big problem : phone having problems, me flash captivate and flash fail ( i think i used odin 2.2 flasher which for some reason doesnt want to work, i tryed it a few times before... but anyways so I'm in download mode and now the computer wont detect my phone, just like my desktop, I get the UNKNOWN USB device or the usb device did not install correctly blah blah blah malfunction... SO now I'm able to get into DL mode but thats it.... so where is the fix for this? Please help . its so strange that no changes were made and it goes from having worked for months to not working at all suddenly...
Again neither odin v 2.1 or v 2.2 ( as in froyo and eclar) will detect phone nor will the hemdol program or what evs.... so i can not boot past download mode. Please help .
Click to expand...
Click to collapse
What rom are you on? CM7 MIUI?

Well huge problem... for some reason the phone wont charge now so now i cant even get in DL mode and before that i couldnt for the life of me no matter what i read find a fix for the USB issue. idk what the **** it is but its really annoying.... I was using OFFICAL 2.2 and was trying to reflash it and try it again or flash 2.1 because i was getting random restarts. then the flash failed for some reason first time ever I think ( i seriously have flashed about a dozen times since ive had my phone over 9 months, So i know alot and have read alot, have a jig and all that jazz) so i know what im doing... I just got my phone back from samsung about a month ago they fixed a random button pressing problem, and now the turning off on a Stock rom ( plus firefly prior, why i went back to stock) made me paranoid, plus i use it as a clock for work so i cant have it turn off randomly at all. So what am I to do? I possibly can use my friends battery for a bit or my womans... but im thinking maybe this has less to do with computer now and possibly that my phone fried or something that i should send it in to samsung for warranty repair...since obviously if it was restarting on a new 2.2 instalation obviously there were probably some problems...

I read a similar story of this randomly happening to another experienced user on google, and he sent it in to samsung and they just sent him a new phone... my AT&T warrianty is long gone on my refurb but i still got 3 months left with samsung... idk why it isnt even charging on wall outlet or computer...
what to do?

Did the phone go "dead" after a failed firmware flash? Or it literally just all of a sudden won't charge? If it was truly random then it's a hardware problem all the way and most likely an issue with the USB port or a trace routed through it. Only 2 lines control charging and the Captivate is notorious for a pretty solid port from my findings.

Well I left my phone in the wall for hours and I guess it does charge so its not completely dead. Now just the issue of reflashing stock on there... so getting the USB to work in my computer. I take it the USB in the phone isnt dead or the JIG wouldnt work... I just want to know if the Random shut off is hardware related or a bad flash / rom? Anyone know what has less problems? 2.1 or 2.2? I dont think my keyboard is in 2.1 so i dont think i could take it... but i just want a working phone with my gingerbread keyboard <3 I just dont want it to turn off on me...

and now randomly odin's will still not detect, but heimdol will, but it fails about 18% into factoryrfs or what evs. And Yes I have used it before and yes I am following all directions. WTF this is blowing my mind... and yes repartition is selected

Are you using an OEM Samsung Cable? Don't use knock off cable for anything more than charging...

just fyi if u rooted ur phone and samsung checks the programing to find out and trouble shoot it will void your warranty and youll have to pay for it... so um maybe try spending the 50 and go with a refurb thru insurance.

Yes I'm using stock cable...
ANd its not rooted, its not ANYTHING since there is no OS on the phone so no way to see anything to void anything...

now most things ( on different computers) will detect the phone and all odin and heimdol but they will both fail at the beginning of any flash... Its like nothing can be pushed through the phone.... ?

I have heard once hedimall is used on a computer it screws with odin and wont let it see ur phone
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

b-eock said:
I have heard once hedimall is used on a computer it screws with odin and wont let it see ur phone
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!
Click to expand...
Click to collapse
It doesn't necessarily screw with it. Heimdall installs a custom WinLIB USB driver to operate with Samsung Composite USB devices. This driver is used for Samsung Download mode which ODIN doesn't recognize. To switch back to using ODIN, you just need to go into device manager and uninstall the device and be sure to DELETE DRIVER FOR THE DEVICE. Then just plug the phone back in when in DL mode and the Samsung driver will be re-installed. However, this is really beginning to sound more like a hardware problem. I emailed you back and would be happy to put a final diagnosis or repair on the devil phone.

[Q] Galaxy S I9000 won't boot and turns off

Hello Community,
I'm new here and hope you can help me even if it is only a little bit
So I have a Samsung Galaxy S I9000 with stock rom 2.3.6, root rights and cwm flashed.
Before I did this I had some problems with my phone, e.g. if I hit (gently) the back side the phone turns off =/
My new at the moment real problem is that I cannot turn my phone on if I only use the battery. (onlly the Samsung logo appears for a short time)
I can only boot it if the phone is pluged into my computer. When it runs and the display turns off, the phone will go off also. (not instantly but atfter 2-5 minutes)
Does anyone knows something about such a problem?
Thanks for your help.
graphik_
p.s.: I am sorry for bad english =/

graphik_ said:
Hello Community,
I'm new here and hope you can help me even if it is only a little bit
So I have a Samsung Galaxy S I9000 with stock rom 2.3.6, root rights and cwm flashed.
Before I did this I had some problems with my phone, e.g. if I hit (gently) the back side the phone turns off =/
My new at the moment real problem is that I cannot turn my phone on if I only use the battery. (onlly the Samsung logo appears for a short time)
I can only boot it if the phone is pluged into my computer. When it runs and the display turns off, the phone will go off also. (not instantly but atfter 2-5 minutes)
Does anyone knows something about such a problem?
Thanks for your help.
graphik_
p.s.: I am sorry for bad english =/
Click to expand...
Click to collapse
Weird try a flashing a custom ROM while plugged into the computer maybe it will help.
Sent from my GT-I9000 using Tapatalk 2

Seems to me like a hardware problem.I guess battery is going to die soon.Try with another battery.

TheImpossibleEnemy said:
Seems to me like a hardware problem.I guess battery is going to die soon.Try with another battery.
Click to expand...
Click to collapse
I can exclude the battery. I have tested two of them and I can be sure that both are well because they work in another Galaxy S I9000 without problem.
To flash a custom rom with plugged phone into computer will be tested tomorrow.

graphik_ said:
I can exclude the battery. I have tested two of them and I can be sure that both are well because they work in another Galaxy S I9000 without problem.
To flash a custom rom with plugged phone into computer will be tested tomorrow.
Click to expand...
Click to collapse
Good luck:good:But I would suggest to flash stock gb rom first just to make sure its not a software problem.

I remember @xsenman has mentioned a solution for this problem about two months ago..... I am sure he will write you soon here.

I had the same problem with my phone, it would reboot if i tapped the back of it, i found out it was a dodgy app i installed so i uninstalled a couple of apps i recently installed and it solve the problem.

So know I have tryed to flash with connected phone. I do not know whether it works because the phone won't boot the system, only recovery and bootloader.
In cause of this I have reflashed with Odin again. Now I get at reboot this screen:
image: s29.postimg.org/bu61r7md3/PZv_PCPk_Txs5a_Xl_G_z1a22_Odgumodl7_HN6v_Ksy3_Q5_MNPm_s.jpg
sry but i cannot post direct links =/
I understand what there is written but I don't know why, the only sdcard is my internal there is no external connected.
So there is a new problem and I would be glad about new ideas =\
(I tryed: reboot, wipes and reboot, wipes and new flashing (same problem))
@tetakpatak if my system boots again I would search for his post thank you