Related
Hi,
I have lost the ability to use my internal and external storage memory. Is there anyone that can tell me how to fix this. I am at a loss.
Thanks
Zack Cadieux
I have the same problem after flashing JPH firmware. (I know how to flash FW, I've been flashing every FW as it was released)
It says that there is an I/O error in mmcblk0p1.
I think i'm screwed as well.
Not one person knows what is going on
Hi,
Im supprised that even the dev's know nothing about this issue. I have read almost every thread and nothing to show how to respolve this issue. Is there anyone???
I had the same problem. I have a Bell Vibrant which I flashed to JPH using the Kies method, rooted, then One Click Lag Fix. Things worked for about a day then I lost my storage. Luckily I did the samsung 3 button fix first.
I downloaded the Tmobile Stock Rom, and used the following instructions to flash.
http://forum.xda-developers.com/showthread.php?t=734475
It booted up to the Tmobile Rom, and everything worked. I then used Odin to flash back to JPH.. rooted.. and now am contemplating the Lag Fix.
Not sure if it was related to the problem but I had my phone connected to my computer transferring files before all hell broke loose. I may have yanked the USB without unmounting... Just a thought.
Good Luck..
Dawgplg said:
I had the same problem. I have a Bell Vibrant which I flashed to JPH using the Kies method, rooted, then One Click Lag Fix. Things worked for about a day then I lost my storage. Luckily I did the samsung 3 button fix first.
I downloaded the Tmobile Stock Rom, and used the following instructions to flash.
It booted up to the Tmobile Rom, and everything worked. I then used Odin to flash back to JPH.. rooted.. and now am contemplating the Lag Fix.
Not sure if it was related to the problem but I had my phone connected to my computer transferring files before all hell broke loose. I may have yanked the USB without unmounting... Just a thought.
Good Luck..
Click to expand...
Click to collapse
My situation is about the same. I did the update and applied the root and lag fix. Phone worked fine for a day or so and then it just locked up and couldn't detect the sd cards anymore. I rebooted and it was stuck on the S for over 30 minutes...I flashed HJ2 and when it rebooted all that happens is I get a gray blinking battery if it's attached via USB and if on battery it boots up to the I9000 initial screen and shuts down. Lucky for me the shop will do a swap when they restock in about a week. Back to the HTC for now.
LordSoth said:
My situation is about the same. I did the update and applied the root and lag fix. Phone worked fine for a day or so and then it just locked up and couldn't detect the sd cards anymore. I rebooted and it was stuck on the S for over 30 minutes...I flashed HJ2 and when it rebooted all that happens is I get a gray blinking battery if it's attached via USB and if on battery it boots up to the I9000 initial screen and shuts down. Lucky for me the shop will do a swap when they restock in about a week. Back to the HTC for now.
Click to expand...
Click to collapse
Dont recall if I did any of the Recovery options, but I remember the big Grey Battery... You could even try flashing back to JPH through Odin... It may wake it up. But good to hear they will replace it, at least you have something to fall back on.
Dawgplg said:
Dont recall if I did any of the Recovery options, but I remember the big Grey Battery... You could even try flashing back to JPH through Odin... It may wake it up. But good to hear they will replace it, at least you have something to fall back on.
Click to expand...
Click to collapse
There was another thread I read about this exact same issue happening and the guys had to return the phones in the end. Yea I was lucky I was under the 30 days limit. By the time I get a new one hopefully a proper Froyo build will be out.
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)
worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...
I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.
...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."
yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje
cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.
http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
First i would liik to charge phone for 24 hours and also check with another battery .
jje
JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.
Bump - Still actual
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.
Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz
Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.
Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!
I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?
this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.
vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.
mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.
firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Try a different USB cable?
Sent from my SPH-D710 using XDA
izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it
Hi Guys,
I had a reboot loop problem in my X8 after installing Viber from a Wifi connection and decided to mod it. I successfully unlocked the boot loader & rooted my Xperia X8. Flashed it with CM7 RC1 V4. I rebooted the phone to see the Cyanogen Mod screen with the skate board and it proceeded to ask me a question about the setup wizard or market option, I made a selection and the phone went dead. It rebooted and started hanging on the SE logo. I thought it was due to Baseband 15 and flashed it but no luck.
I have Clockwork Mod on it and can randomly enter it also. I would appreciate any help and pointers, is this an issue due to using the wifi and is the hardware at fault. Once the boot loop starts the battery drains pretty fast I can see the Cyanogen battery status icon and try to wait for it to charge completely
Many thanks & regards
bytecodeboy said:
Hi Guys,
I had a reboot loop problem in my X8 after installing Viber from a Wifi connection and decided to mod it. I successfully unlocked the boot loader & rooted my Xperia X8. Flashed it with CM7 RC1 V4. I rebooted the phone to see the Cyanogen Mod screen with the skate board and it proceeded to ask me a question about the setup wizard or market option, I made a selection and the phone went dead. It rebooted and started hanging on the SE logo. I thought it was due to Baseband 15 and flashed it but no luck.
I have Clockwork Mod on it and can randomly enter it also. I would appreciate any help and pointers, is this an issue due to using the wifi and is the hardware at fault. Once the boot loop starts the battery drains pretty fast I can see the Cyanogen battery status icon and try to wait for it to charge completely
Many thanks & regards
Click to expand...
Click to collapse
* Did you factory reset it from CWM before installing the ROM? Boot loops are common when one doesn't, particularly if you're coming from another ROM (from what you say, I guess you're coming from stock 2.1)
* It seems that you flashed baseband 015 AFTER flashing the new ROM. AFAIK it should be done BEFORE flashing a new ROM, while still on stock 2.1. If that's the case, you'd have to go back to 2.1 using SEUS (or Flashtool; there are stock ROM images here on XDA), THEN flash baseband 015, THEN root, THEN flash CM7 again.
---
As a side note, you unlocked your bootloader but didn't install a new kernel, which is what one normally unlocks the bootloader for. Unlocking the bootloader isn't needed to flash a ROM as long as it works with the stock kernel (most don't, but yours should.)
Mod issue or battery or hardware fault
Cheshire-Cat said:
* Did you factory reset it from CWM before installing the ROM? Boot loops are common when one doesn't, particularly if you're coming from another ROM (from what you say, I guess you're coming from stock 2.1)
* It seems that you flashed baseband 015 AFTER flashing the new ROM. AFAIK it should be done BEFORE flashing a new ROM, while still on stock 2.1. If that's the case, you'd have to go back to 2.1 using SEUS (or Flashtool; there are stock ROM images here on XDA), THEN flash baseband 015, THEN root, THEN flash CM7 again.
---
As a side note, you unlocked your bootloader but didn't install a new kernel, which is what one normally unlocks the bootloader for. Unlocking the bootloader isn't needed to flash a ROM as long as it works with the stock kernel (most don't, but yours should.)
Click to expand...
Click to collapse
Many thnks for the reply mate, what you said is right. I might have missed a few things. But I reflashed Baseband 15 yesterday before your reply to my post and now it seems to be booting into cyanogen mod happily but each time it takes only a few seconds and through a few setup screens before it reboots again.This is exactly what was happening even on the stock ROM before doing any Mod procedure and the battery gets drained too. Could this be a hardware fault.
bytecodeboy said:
Many thnks for the reply mate, what you said is right. I might have missed a few things. But I reflashed Baseband 15 yesterday before your reply to my post and now it seems to be booting into cyanogen mod happily but each time it takes only a few seconds and through a few setup screens before it reboots again.This is exactly what was happening even on the stock ROM before doing any Mod procedure and the battery gets drained too. Could this be a hardware fault.
Click to expand...
Click to collapse
i didnt get it, when on setup screen you mean when it tells to add your email.....and when you are finished it reboots?!
if i understood well,there is no hardware problem, go to cwm, full wipe-factory reset,advanced>wipe dalvik, reinstall your rom(install custom zip) and it should work:fingers-crossed:
stamatis16 said:
i didnt get it, when on setup screen you mean when it tells to add your email.....and when you are finished it reboots?!
if i understood well,there is no hardware problem, go to cwm, full wipe-factory reset,advanced>wipe dalvik, reinstall your rom(install custom zip) and it should work:fingers-crossed:
Click to expand...
Click to collapse
Thanks for the reply stamatis, basically its just shutting down because there is no battery left to power it, it seems. At times it reaches upto the setup wizard (shown when booting for the first time), the next time it could go up to adding a gmail account or language selection screen. I have even seen it load the home screen before it shuts off. This all started happening after downloading some apps from a wifi connection. I have done that before wiping and re installing but will try again. My presumption is that since it was happening on stock ROM and now on CM7 too then it's probably a hardware issue
Regards
bytecodeboy said:
Thanks for the reply stamatis, basically its just shutting down because there is no battery left to power it, it seems. At times it reaches upto the setup wizard (shown when booting for the first time), the next time it could go up to adding a gmail account or language selection screen. I have even seen it load the home screen before it shuts off. This all started happening after downloading some apps from a wifi connection. I have done that before wiping and re installing but will try again. My presumption is that since it was happening on stock ROM and now on CM7 too then it's probably a hardware issue
Regards
Click to expand...
Click to collapse
ok i see now,your problem is battery drain,
is it that extream? i mean, you charge to full and when you open it up it shut down by low battery?
have you try to opening while charging?is it the same?
are you sure its charging?
that way too xtream to be software problem so its more likely that its hardware...
stamatis16 said:
ok i see now,your problem is battery drain,
is it that extream? i mean, you charge to full and when you open it up it shut down by low battery?
have you try to opening while charging?is it the same?
are you sure its charging?
that way too xtream to be software problem so its more likely that its hardware...
Click to expand...
Click to collapse
yes you got it right. I do charge it fully and when it boots the CM7 UI for a few seconds the battery goes down half or even less or nearly empty. I have tried opening it while charging and thats when the above happens, yes I can see the Cyanogen charging icon. So you think its a hardware issue and I should not pursue it further
bytecodeboy said:
yes you got it right. I do charge it fully and when it boots the CM7 UI for a few seconds the battery goes down half or even less or nearly empty. I have tried opening it while charging and thats when the above happens, yes I can see the Cyanogen charging icon. So you think its a hardware issue and I should not pursue it further
Click to expand...
Click to collapse
yea, i guess your battery almost dead.....and i dont think its a good idea to by new battery, you better buy new phone,as the batteries are quite expensive if you think that the worth of the x8 right now would be 50 euros....
Try ebay bro
Sent from my E15i using Tapatalk 2
Flash rom with xrecovery not cwm
Sent from my X8 using xda premium