Related
The USB cord was removed from my phone in the middle of an Odin restore (it was stuck at factoryfs.rfs). Now the phone won't boot and it isn't recognized by my computer when plugged in. Did I find a way to brick this thing? Any help would be appreciated. This is my fourth Captivate and I'm sure AT&T is going to start to give me a hard time. Thanks.
build a jig or buy one on ebay. you need to get into download mode and reflash to sotck.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
http://forum.xda-developers.com/showthread.php?t=731989
Try all 3 methods to get into download mode first
yes, you can try the key combo first. but as i know, build 1010 or later wont work for the key combo.
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Edit: Just booted up. That's a relief. Thanks.
Thare187 said:
Got it back to d/l mode. Now it's stuck at factoryfs.rfs-same as last time. I'm finished with this phone. AT&T can send me another. This is what happened to the past two phones. Stuck on a Odin restore and can't get it up again.
Click to expand...
Click to collapse
If it had happened on more than one phone, you may consider looking at odin...maybe remove and reinstall our check your drivers or computer...just double check all of little stuff that might be so obvious that they are not obvious
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
so if your potentially bricking the phones, what do you tell AT&T that happened? and do they not ever check or whats the deal?
As far as I know at the wareenty centers they check for physical and water if they do attempt to boot as long as nothing looks custom they wont bother with checking the recovery or key combos samsung takes care of the rest they just want functional hardware..oh dont mention anything about modding. If anything syncing crashed is the best explaination. Tested.
Sent from my replaced cappy XD
Just dont become a familair face or it might get flaged on your account. Study up before doing somthing new. Just crashed my test cappy writing this had to stop and reflash heh live and learn.
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
noobfail said:
A tech here on the forums said they can tell if it has been modified in just "3 clicks".
Sent from my SAMSUNG-SGH-IDK?
Click to expand...
Click to collapse
Lol....uh huh....i also have a direct line to the white house
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
Omg really?!
Sent from my SAMSUNG-SGH-IDK?
Just messin' around....what kind of tech? Att, samsung or other?
********
Sent from my Samsung Captivate using the XDA app
ROM: Paragon RC5 1200 mhz/100hz kernel
He said he was a manager of an actual at&t walk in tech support store.
I rooted a phone and flashed to stock and returned it with no problems.
Sent from my SAMSUNG-SGH-IDK?
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Thare187 said:
Sorry I'm late getting back. My phone is up and running again. Got in to D/L mode and flashed back to stock. Got stuck on the AT&T logo, but used Odin one more time and it booted right up. The first time I brought in the phone, the tech took it to the display for 2 minutes and called the warranty dept for me. I think that it helped that the Chiefs playoff game was on. They didn't seem to want to be bothered! The phone rep asked about water and physical damage. No questions about modding. The second time I did it at home over the phone. Again, no questions about modding. I told the rep both times that I was trying to transfer music to the phone via Kies and it crapped out on me. It always help to play dumb and act like you don't know too much.
Click to expand...
Click to collapse
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
bugity said:
I had the same exact problem when i was just starting to mess around with roms and my biggest issue was the sequence that it took to flash properly. i kept opening odin then putting my phone in download mode and THEN plugging it into use as opposed to how it should have been which is holding vol up and vol down pressed then plugging in usb.
Click to expand...
Click to collapse
That's the weird thing. I'm somewhat new, but have been flashing my Captivate since Sept. When the original Cognition came out I was flashing daily. I think my problem was, it took longer than usual to flash to stock, I got impatient and didn't realize I could get to D/L mode by taking the battery out, holding power and inserting battery. I always used the button combo. Live and learn.
same problem
Ok i have the same problem as the original post stated, running odin and disconnected right at the beginning of the rom flash! this phone wont power up, and my jig (which i have used before) will not work! Is it done for!?
Ur last hope lays in adams Am I bricked thread, where u'll find an app that checks what state ur phone is in (linux or ubuntu needed)
nevermind, I tried harder and the jig worked, its one of the homemade jigs, where you cut up your charger, and use resistors to create the circut . . . . jankety but i got it to work thanks anyway though
Glad you got it, but I would buy a jig and keep it in a drawer. Just in case.
They just won't. They'll work normally when on and they'll go off after so much time of idling, but when I turn off the phone it buzzes like a complete shutdown and they just won't go off. I think it started when I loaded that leaked 2.3.3 captivate rom from SamFirmware and now it continues after a 2.1 stock downgrade and updating to 2.2 via Kies. I can't find anyone else with this problem.
hmm That's weird... if you pull the battery and replace it do they come back on?
Oh yea, I've been playing around with it and everything to see what I can do. It started happening about the same time my power/sleep button started messing up. It still is messed up, but I don't see how one would effect the other. Like I said, they work normally until I try to turn it off. Then, they don't go off until I pull the battery or boot it back up.
Jmurph3 said:
Oh yea, I've been playing around with it and everything to see what I can do. It started happening about the same time my power/sleep button started messing up. It still is messed up, but I don't see how one would effect the other. Like I said, they work normally until I try to turn it off. Then, they don't go off until I pull the battery or boot it back up.
Click to expand...
Click to collapse
if they dont go off when you turn it off until you pull the battery, it might be safe to assume your phone isnt actually off. Try reflashing whatever ROM you have going on within your cappy.
redkenji said:
if they dont go off when you turn it off until you pull the battery, it might be safe to assume your phone isnt actually off. Try reflashing whatever ROM you have going on within your cappy.
Click to expand...
Click to collapse
It has happened on two different ROMs. The 2.3.3 leak and then again when I flashed back to stock 2.1 and even after I updated to 2.2 via Kies mini.
maybe try calling samsung then. They may be able to address the issue. My friend has a vibrant that he bricked, hard bricked and they fixed it for free so, they might be able to help you out. it might be a hardware issue they can help you out with.
redkenji said:
maybe try calling samsung then. They may be able to address the issue. My friend has a vibrant that he bricked, hard bricked and they fixed it for free so, they might be able to help you out. it might be a hardware issue they can help you out with.
Click to expand...
Click to collapse
Very possible. I won't have a phone for that time, though. Haha....oh how we can't live without our mobile devices...
Att will send you a replacement first, then you send you old one back. If its still under warranty. I just told them I don't have a home phone, and they overnighted the replacement for free.
Sent from my Captivate running Continuum 5.6
Well, it randomly stopped. It shuts down and when it buzzes the backlights won't stay on. Idk what I've done for it to stop. I still have a busted power button, time to send in for a replacement.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
i just went thru a problem with a broken power button. long story short i claimed my warranty and got a refurb. the refurb had 2.2 on it. like a jerk i thought it would be fine to use this guide ( https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y ) just like i did with my previous phone to get miui back on my phone. i had to downgrade to 2.1 on my old phone but for some reason i thought it would be fine to use the 'safe froyo base' with my already froyo phone...
anyways i got as far as odin saying it was setting partition and it would go any further. no option but to unplug and try again. before trying i tried to boot and take a look at kies. the phone wouldnt boot. just a black screen. so.. i went ahead and tried odin again since i could still get into download mode. it still hung at the same spot. pulled the plug again and put it into download mode and got the great idea of using 1-click to go back to 2.1 stock. then it hung after, i think the 3rd message that it spits out in the log. cant remember what it said but it was a normal msg. so i pulled the plug and tried to put it into download mode again. NO LUCK. and still doesnt boot.
SO, i have a non-booting, non-download mode, non-recovery mode, no signs of life captivate...
is it a refurbished turd or is there hope with a jig or something else?
i know, long story short
those instructions were for i9000 not captivate...
odin sometimes gets stuck on set partition and i wipes the params.lfs partition where the download mode image is stored.
ill bet you 100 bucks if you restart odin. take out your battery, put back in, hold both volume buttons and plug in usb, THE SCREEN WILL NOT come on, BUT odin WILL turn YELLOW in the first box and windows will beep that it found the device.
Odin will flash with a black screen. when the flash starts, you will see a blue bar on the black screen.
use the one click stock roms in the XDA CAPTIVATE development section.
use XDA. period.
so you're saying use the same method again? or use an odin 1-click stock. 2.1, 2.2, or does it even matter? cuz im pretty sure in my rage of panic i tried both one click and full another time and nothing happened. ive got nothing to lose by trying again tho. thanks for the reply.
edit: just tried what you said with the one click i have and no go. ran odin as administrator. dont have time til after work for the full method or a different one click. but i will definatley try.
FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.
befreewv said:
FYI, regarding your question about a jig, I just had a similar problem (thread http://forum.xda-developers.com/showthread.php?p=19581785#post19581785 I tried every option on this board and many others to get into download mode without success. The jig worked (thankfully!). might be worth trying it before giving up. as for me, no more flashing until I get Outler's Unbrickable Mod.
Click to expand...
Click to collapse
thanks for the reply. im gonna give it a few more tries before attempting the jig. my power has been out for the last 11 hours so i havent been able to use my pc... or anything really. lost all my food in refrigerator and freezer too .
im gonna mess with this thing a bit more to see if i can make a pearl out of swine poop.
maybe someone can answer me this:
considering what i did to get the phone into this state, if i try to exchange it and tell at&t that i just powered off and it simpy wouldnt power back on is there any way for them tell if it was because of what i did?
anyone? still searching and trying to get dl mode or at least my pc/odin to recognize the device. nothing has worked yet. im downloading sdk now to try adb. i have a feeling that if adb doesnt work then AdamOutler will be $30 richer . and i have an even bigger feeling that adb will not work.
nawlage, PM sent.
4-2ndtwin said:
nawlage, PM sent.
Click to expand...
Click to collapse
thanks, just read it. the thing is, the phone has no signs of life. pbl or sbl seems to be borked but not possitive. ive heard that what i did shouldnt brick it like it has been bricked.
just tried using adb. couldnt even get to it after downloading sdk. there was a read me where adb normally is and said it was moved in the version i have. i tried to install it and it just said nothing was done. could create the directory. i gotta go to work now so i cant try anything else til i get home.
looks like im gonna try for another warranty claim on the grounds that i was putting my saved data from my old phone onto my replacement with kies when the power went out and my phone froze. pulled battery and wouldnt turn back on. if im denied then ill prolly pay for the unbrickable mod. might get the mod even if i get the warranty refurb. seems like a good investment. ill post the results. thanks to those who gave ideas.
EDIT 11/25: i ended up telling them that it worked fine when i went to bed and woke up 4 hours later and it was off and wouldnt turn on. the rep tried all the things i already tried while i snickered to myself and he said 'yeah its dead'. i got another refurb stock uckb2.
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
gahlaygai said:
so apparently I tried to flash without the physical 3 button combos for download and recovery mode so I got into download mode with adb commands.
but now I'm stuck in the PHONE--!--PC part, and odin doesnt recognize my phone. I've read most of the threads out there but none of the methods work, is it possible to fix this? or my only option is to bring back to the store?
Click to expand...
Click to collapse
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
TJj33p3rz said:
Reinstall drivers then plug your phone back in that should do it.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
oh, I've done that dozen of times.. still the same
See the "Connection Issues" Sticky Thread link that is in my Sig links-link below.
Sent by XDA Premium App
I had that happen then i tried to me many times i also ran the hiemdall back to stock one click it will ask you to install them again i did that it worked,then i was back to stock then started over.Now i ran odin and now my captivate wont even power on its just dead.Keep at it something will end up working.Good luck.
I never had that screen but I ran into an issue before (using motherboard USB port, correct drivers, etc) where I was in download mode but my computer did no recognize my phone. I had a jig and ended up pulling the battery, reinserting battery, and putting back in download mode and that worked.
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
gahlaygai said:
would you guys happen to know how to determine if its an driver issue or the phone's problem?
oh and I've tried the CONNECTION ISSUE post, none of them worked for me
and also does the jig definitely work?
Click to expand...
Click to collapse
You can eliminate drivers as an issue by trying a Linux machine. Wubi installer is the easiest way to try it.
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
bobbylx said:
I've been at that screen many times. I would bet drivers have nothing to do with it at this point. The phone---!---PC screen is what I've always called a soft brick, not download mode. If you didn't have 3 button recover/download mode working before you used Odin, then the only thing I can think of is to make yourself the 301kohm jig. That should kick it straight into download mode. There's many links for this in here.
From there, I'm pretty sure there's something you can flash to give yourself button recover/download again, but since I have a first rev phone I've never had to do this.
Click to expand...
Click to collapse
oooo i see, thanks, will try asap!
gahlaygai said:
oooo i see, thanks, will try asap!
Click to expand...
Click to collapse
The phone----/!\----PC screen is DL mode dude...
^^^ This. You can usually flash right from that screen.
b-eock said:
The phone----/!\----PC screen is DL mode dude...
Click to expand...
Click to collapse
This is Download mode.
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
bobbylx said:
This is a soft brick. Now some phones may be able to be flashed while in this mode, but mine can't. Mine is a rev 1007, meaning 3 button always worked and is damn near unbrickable. I've been on that screen many times and never been able to make Odin connect. But, I have been able to pull the battery, plug in USB, hold both Vol, and put battery in and boom, back in DL mode.
Click to expand...
Click to collapse
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
mrhaley30705 said:
The phone-!-computer that can be used as dl mode is the one that says "Firmware Upgrade Failure". I've flashed from that screen before (new one, not old one). Unless you have the i897 gb bootloaders, you probably won't see the new panic screen. A jig will fix you up if have the old panic screen.
Click to expand...
Click to collapse
That makes sense. I haven't seen that screen while using GB boot loaders, only the older version.
Sent from my I9000 using Tapatalk
Sorry
10 char
b-eock said:
bobbylx, I have had all types of bricks this phone can have. I have a build 1012 and still didn't have the button combo problem. I promise you I know more about any subject on this phone than you. The
Phone----/!\-----PC screen
Is the firmware putting you into DL mode because it isn't going to boot up.
The android man digging is a hardware combination into DL mode.
I have had all screens this phone can have, I also have the unbrickable mod, so while your phone is brickable, mine isn't.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
bobbylx said:
Well, let me rephrase my statement for you since you were obviously upset by what I said.
I've had this phone since release week. In that time, I have seen the phone---!---PC screen many times while flashing. My phone will not flash while on the phone---!---PC screen. Odin does not see it, nothing works. Many other users experience this as well.
I happened to mention that I have never had a 3 button issue no matter what I flash. So when I have been at the phone---!---PC screen, I do the battery pull, usb thing, and kick it into normal "shovel man" download mode, ie, the only one I can flash my phone with.
Now, phone---!---PC may act and work like download mode for you but doesn't for me. So I offered advice based on my personal experience.
While you may know more about the phone than I do, making statements like that do nothing to help your popularity around here.
Also, pretty sure my phone is unbrickable without the mod, at least I haven't and won't brick it by doing whatever I do. If I was a Dev, may be a different story. I can tell you I have flashed almost every ROM in the last year and a half and never had a problem I couldn't resolve.
Click to expand...
Click to collapse
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
b-eock said:
Well let me say I am sorry for not reading it correctly! Sorry. Will edit my post!
Click to expand...
Click to collapse
No worries. And again, I'm no Dev so anything I say is just from what I've experienced. I'm sure there's quite a lot I don't know.
Anyway, to the OP, keep this thread updated on your progress.
And to go back to what I was saying, if you can't flash while in phone--!--pc mode and you can't get into shovel download mode, do the 301kohm resistor jig trick.
Sent from my I9000 using Tapatalk
I hope someone can help me here, I'm posting with the belief that this may be a simple enough problem (With the hope).
I tried to install a Custom Recovery on my Galaxy S using this tutorial - wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
I managed to get to step 6, and a blue bar appeared, but then i could not do step 7.
Now i cannot boot into recovery mode, nor will the phone boot past the Samsung Galaxy S logo.
I can still get into download mode, but Odin does not detect the phone.
. I have changed cable and tried different versions of Odin..
When i turn on the phone normally it shows the Samsung Galaxy S logo, blinks, and then reboots and does the same.
When i try to enter recovery, i get the same, unless i connect it to the PC. I then get an 8 pointed star, like the loading flash circle thing - the same as a flash video loading except it does not move.
I have also removed the battery and tried to enter recovery and download mode while inserting the battery.
I have removed the SIM and battery for a few minutes.
when i try to start Zadig, with the phone connected in Download mode, i get "Gadget Serial" as the device connected. I used to get "Samsung USB Composite Device"
I have tried many different things and read over the recommended threads on this forum. I think i need a bit more pointing in the right direction.
I really hope somebody can help me. I am very worried that i may have bricked it.
Thank you.
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps?
Also have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975
Click to expand...
Click to collapse
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Tomato_Jam said:
I hadn't seen that thread, but i have gone over tons of them Thanks for reply.
I eventually got Odin to detect it and I tried this - http://forum.xda-developers.com/showthread.php?t=1544487
It came up red and said failed.
I closed odin and disconnected the phone. Now i can't even turn it on.. Nothing. I am hoping the battery died, and it's a coincidence..
No response at all to any buttons... I haven't done anything else.
If i can get it to power up again, i'll try those tips.
Click to expand...
Click to collapse
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
sorry to ask some stupid question, but can u make sure what versiom ur fone is?
is it i9000?, or i9001 or i9003? or korean anycall? as far as i know, flashing i9000 ROM to i9003 will hardbrick da device.
Sent from my GT-I9000 using xda premium
akash6969 said:
Ok, Don't worry, Charge your phone battery to 100%, leave over night. ( keep charger connected to your phone overnight)
Best to have a fully charged battery in these situations!
Keep calm, and read and prepare what you want to do next.. Don't try everything in a frantic effort to get your phone started again.
I know it's difficult, but there are lots of threads on how to rectify most problems.
I wish you Good luck!!
Click to expand...
Click to collapse
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Tomato_Jam said:
Thanks.
This is a disaster. I tried to power it on to any mode there before i saw your post.
I needed to update the phone, because an app i needed for studying was only available on Android 4+.
Now no phone..
I saw a few threads, i hope after i leave it overnight i'll be able to power it.
If not, probably a JIG?
I don't fancy making one, but if i have to, i guess i'll give it a try. I don't think i could wait a week or more for a premade one to be delivered.
Anyway, for now, i'll keep my fingers crossed.
Thanks for help/tips and reply.
I'll post back tomorrow, hopefully with some better news.
Click to expand...
Click to collapse
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Soryuu said:
Sorry to say, most likely you will need a USB JIg to fix the problem you have. :/
If you linked the correct page when you said you tried to do this- and if I opened the correct page, that takes you to an SII section. Those are SII firmwares, not for the S.
So as compacity said, please clarify what device you have... Whether its an I9000 (galaxysmtd is for the I9000) or an I9100 (the firmware page you linked). If you do have an I9000, then your brick comes from flashing a different device's rom onto the S, which would give this error in Odin beause its incompatible.
In this case, you'd probably need a USB Jig to come out of it.
Try what the others said and hopefully you'll be at least able to enter Download mode before resorting to a jig, but considering your situation, I have to say realistically a jig is your best bet :/
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
huskyT said:
You need a usb jig. It will get you into download mode. Now you need to flash cf root, which will come with cwm recovery. Recovery mode should work now. If you get computer!phone, then re-flash cf root. Now you should be able to flash CyanogenMod via cwm recovery. Thank if I helped!
Sent from my GT-I9000 using cm10.1
Click to expand...
Click to collapse
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Tomato_Jam said:
Both helped a lot, thanks.
I had to end up bringing the phone to a repair shop
Something i am not inclined to do if i can avoid it. Especially if i caused it, i would hope i could undo it. But because i need a jig, and i wouldn't have time to get one or make one before Monday, i had to bring it to someone else.
I am buying the materials for a jig, and maybe going to buy one also, for future.
@Soryuu - Yep, i linked to the page, so i must have flashed the wrong firmware.
I'm angry with myself because i read everything else carefully. I had been reading all day. I guess i was just tired and thought I had got to the final hurdle. I was careless.
@huskyT - Thanks, will know that for future reference. I have two old Android phones somewhere. One is a Galaxy Europa, and one is an LG (not sure what model). Both are borked in some way, but i could probably use them for practice. I think the Galaxy Europa is flashed badly. Not by me. (Thankfully).
Click to expand...
Click to collapse
Don't stress mate, we all have bad days, we all make mistakes
Sent from my GT-P7510 using Tapatalk HD
Well....
I would have been quicker if i had ordered a jig and done it myself.. (Worth mentioning, i had told guy in phone shop what happened, and about the required "jig")
I collected my phone from the shop today, after a week, and i was told "Your phone is f*****d". To which i replied, "what? are you sure, i mean, i have only flashed it with SGS2 firmware, i'm under the impression it is very hard to break/brick, if i have a jig."
He told me, "Nope, it's beyond repair, it won't work. If you want, i can use the screen and other parts, i'll buy it off you for €40"
No thanks.
So now i am on the lookout for a premade jig. Does anybody know where i can buy one?
I meant to last week, but things happened, and without a phone i was running around a bit...
I'm going to check ebay, but if somebody could recommend somebody reliable, i'd prefer that. Thanks.
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
rodman01 said:
I bought it from ebay, no problem...but just saw a couple of minutes ago that also on amazon germany these jigs are offered now/in the meantime....
Click to expand...
Click to collapse
Thanks.
I bought a jig, and it arrived today. Have phone in charger.
Do i just plug the jig in?
Or do i also do the three button press?
The screen is completely black, and nothing appears on it.
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
rodman01 said:
only plug the jig in, thats all... phone will start in download mode of its own. :fingers-crossed: :fingers-crossed:
Click to expand...
Click to collapse
Thanks, going to leave it charging for a little longer, and try it.
If it doesn't work, would a motherboard for the Samsung Galaxy S be easy to replace? I have found one unlocked for €25.
EDIT
Found a tear down video here - http://www.youtube.com/watch?v=vxPWsLd05F4
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
rodman01 said:
yes thats not so difficult...only thing a bit complicated is to open the back or middle cover...but there are a few movies on youtupe where you can see how it can be opened and dismounted....btw for the first try with the jig battery has not to be that full...only if it starts in download mode and you can flash it via odin I would recommend to charge it complete.
Click to expand...
Click to collapse
Thanks again.
I am after removing it from the charger, and inserted the jig. It's in about 30 seconds now, and nothing is happening..
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
rodman01 said:
that sounds not good...ususaly it takes only a few seconds or perhaps a minute till it starts to download mode....sorry for no better news....
Click to expand...
Click to collapse
What seems to have happened, is i tried to flash it with SGS2 rom. So is it unbrickable?
I am not sure but I think that minimum the bootloader is damaged...there is one more possibility: to repair it via jtag...but for this you have to find someone, who ones one and can repair it....some of the guys don't take much money for such a repair, but with transport costs ets...perhaps it would be cheaper and faster if you take the new mainboard you mentioned.