Related
YABLP (Yet Another Boot Loop Problem)
Hi,
I'm having a devil of a time installing CM7 on my GalaxyS I9000. Description of my procedure and problem below.
I've been beating my head against a wall for a week so any help GREATLY appreciated.
-John
Phone: Galaxy S "I9000"
Trying to Flash: CM7.2.0 using CWM Recovery
What I did:
Flash stock ROM w/ODIN v1.85 - OK
Wipe Data/Wipe Cache
Flash ChainFire (CF-Root-XX_OVA_JVU_2.3.6-v4.3-XWM3RFS.tar) w/ODIN v1.85
Wipe Data/Wipe Cache
Phone now rooted OK
Boot to CWM Recovery
Install zip from sdcard
Select update on SDCard (cm-7.2.0-galaxysmtd.zip from CM site)
Flash completes in just a few seconds - much too quick!
Phone reboots automatically
Now stuck in boot loop
Screens in boot loop:
1. GalaxyS/GTI9000/Samsung
2. GalaxyS/Cyanogen(mod)
3. CWM menu scrolls by too quickly to read
Back to 1.
Tried Heimdall but complained about missing XML file
Tried installing "Datafix". Would not install (says not compatible with device)
Tried STFW: many reports of same problem but no solutions seemed relevant & appropriate
Clues:
After CF flash, disk use as follows
/system: used 27.3M, free 9.4M (97%) (seems pretty full)
/data: used 47M, free 1916M (2%) (seems pretty empty)
Me thinks maybe /system is too small/full to accept update?
This is the 3rd I9000 I've flashed. First 2 went Ok but this time it failed although identical files/procedures used (I think).
HELP!
I've seen a similar problem on my I9000 - I think the CWM scroll complains about "can't mount /data".
I'm in a similar position, I can't get anything to flash and boot though : http://forum.xda-developers.com/showthread.php?t=1967982
This happens pretty much every time you flash any kind of CM rom from stock. All you need to do is flash CM7, it will go in to bootloop with various text scrolling through thats too fast to read. You just pull battery while in the bootloop. Then replace battery, three button combo to recovery and flash the same CM7 zip again. This time the install will take a while longer. Afterwards flash gapps and reboot and you should be good to go.
I tried this - but same result, just spins round on the CM boot screen
Where do the wipe data and wipe cache commands fit in to this? Before/after both installs?
I don't normally bother with gapps - just trying to get it loaded. Does that make a difference?
Also, no SIM card in at all during all this...
IT WORKED!
Bless you BandiBp!
I'll be sending my first-born by return mail (please don't tell my wife
Yeah that happens because its flashes a kernel with a new partition system. Dunno why only a few roms warn people about this.
Sent from my GT-I9000 using xda premium
You're welcome mate, yeah the reasons are the new partition changes on different roms. I agree that rom flashers should be warned in advance about this. Would reduce problems A LOT. My general rule is if a Rom installs in under 5 secs, then you should always flash again.
Anyways have fun.
Hi guys. I'm quite a noob, but have a good experience on flashing without be bricked (CM9, CM10, Crash, Paranoid...), but I have a problem.
I will explain to you step-by-step what I've done with my Note, so I wish some of you could help me.
1) I was running JB Crash ROM with PhilZ kernel.
2) Some apps got Force Close too often, so I went on Rom Manager and, after a look into the "Fix permissions" description ("It will fix some force closes" or something like that), I decided to give it a try and I tapped on it.
3) After that, my homescreen became unusable, because "TouchWiz Home" got EVERY TIME force closed without reason. Everything else worked fine, so I deciced to boot into CWM recovery to restore a nandroid backup of the same ROM.
4) Instead of tapping "restore", I tapped "backup" (my fault) and it started without possibility of get back. I got something like 200 Mb of free space, so in every case it will never have had success. My Note stucked at this point, so I decided to reboot manually (vol up+home+power) into recovery. Finally I tried to "restore" but I get this message: "ERROR WHILE RESTORING /SYSTEM".
5) I tried to reboot my Note, but it stucks at "Samsung Galaxy Note GT-N7000" screen without going on.
The good news is that it can go without problems into recovery and into download mode. What can I do? Flashing from CWM, for example, CM9 can fix this?
Please help me thanks!
1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....
friedje said:
1. Boot into CWM
2. Wipe data, dalvik and cache
3. Format system
4. Reflash your ROM
Don't use rom manager it's not compatible ....
Click to expand...
Click to collapse
After formatting /system, can I try to restore my nandroid backup? Or I have to necessary reflash my ROM? In that case, it's the same thing make it via CWM or via ODIN PC? I'm still on PhilZ recovery, which is safe I guess!
Anyway, thanks for your help
Via CWM or Odin, depends if you have your rom in the zip or the md5.tar format.
I would reflash to be clean. It's a bit more work in restoring your apps and data
afterwards, but at least you don't restore any messed up files.
if you can still access CMW and Download Mode then you probably are not brick... try fresh install through pc odin.. safe method no need to worry about bricking by fullwiping on unsafe kernel or raising triagle or binary counter whatsoever.. if you wanna play safe then PC ODIN and after that you can root your rom
Thank you guys, now I'm on stock ICS flashed via PC Odin and everything works fine I knew I was 99% not-bricked (still recovery and download mode avaiable), but I was a little scared too.
Thank you again!
glad you solved it.. :good:
I wanted to flash custom rom on my galaxy S. I flashed clean rom, then kernel with CWM, but there is a problem. Everytime I try to flash rom it ends with bootloop. I tried cm7, cm10, rootbox, miui 2.4. Every time is the same. It starts installing (only few secodns), then screen becames brighter, then restart and bootloop. I tried different kernels, roms but still same result.
ps. sorry for my english
Hi, here is a great guide to fix bootloops:
http://forum.xda-developers.com/showthread.php?t=1660596
Usually, doing factory reset, wipe cache and wipe dalvik cache before and after intalling the ROM should fix the issue though.
I'm doing all necessary wipes, I can recover from bootloop easly but I want flash custom rom and I can't. Istalling zip lasts few second, not few minutes, there is a problem.
Sorry if this is too basic, but are you using the right ROM for your phone?
of course...
I don't know if I'll be able to help you, but can you please list the exact model of your phone just in case? You can see the different variants here:
http://en.wikipedia.org/wiki/Samsung_Galaxy_S#Variants
It is just GT-I9000. Now I managed to flash CM7.2 but if I want install CM9 or CM10 im getting bootloop and can't enter recovery mode ;o
Sorry, I can't really give you an answer with that information. If you are following the steps in each ROMs thread, you should have no problems patching as far as I know (someone more knowledgeable than me may say otherwise).
Maybe posting the exact steps you are following would help me or others to find out what the issue is.
I'm following right steps. It's not my first phone. I know how it should be but it isn't. Here are my steps:
Flash stock ROM w/ODIN v1.85 - OK
Flash CF-Root w/ODIN v1.85
Wipe Data/Wipe Cache
Phone now rooted OK
Boot to CWM Recovery
Install zip from sdcard
Select update on SDCard (cm-7.1.0 from CM site)
Flash completes in just a few seconds
Phone reboots automatically
Now stuck in boot loop
Remove battery
Go to CWM again and reflash CM7.1 zip
Now i have CM7
Reboot to recovery, facotry reset, wipe cache, wipe dalvik
Flash CM9/CM10, finishes in few sec, reboots, then black screen, can't go to recovery mode ;(((
Flashing stock with odin again...and every time is the same, sometimes when I choose CM10 i see info: "Incompatible Partition Layout" so it may be the reason (something with partition, idk)
My phone has never rebooted like that, so I'm not sure what the problem is. I do know I use ODIN v3.07. I also have CWM 6.0.2.7
Best of luck finding a solution, sorry I could no be of more help.
I think CWM6 would help but I can't find this version for cm7
IGNORE ALL LINKS BELOW, they are for the wrong phone
I don't think it matters what CM you have on your phone, you should be able to upgrade CWM from recovery: Maybe not in i9000...
http://forum.xda-developers.com/showthread.php?t=1843825
Doesn't work in i9000 as far as I can tell: You can also try installing TWRP, which I like better than CWM and have in a different device:
http://forum.xda-developers.com/showthread.php?t=1694617
Finally, and don't take me on this because is just a guess, maybe your bootloader is not working properly? I don't really remember how to do this myself:
You are showing me links to CMW and TWRP for i9001, I have i9000...
You are right, please ignore those links... I do know I patched CWM 6.0.2.7 through ODIN on my phone, so maybe that's the only way. In any case, I'll let you look for the actual links.
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
synthecypher said:
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
JJEgan said:
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
Click to expand...
Click to collapse
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
synthecypher said:
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
Click to expand...
Click to collapse
All depends upon the package but most CWM are root and recovery .
TRYhttp://forum.xda-developers.com/showthread.php?t=2002953
Ended up using Auto-Root which seemed to work no problem.
synthecypher said:
Ended up using Auto-Root which seemed to work no problem.
Click to expand...
Click to collapse
I initially had a rooted stock ROM that i was using for ages then upgraded to a custome ROM but for personal reasons decided to go back to stock.
Loaded stock ROM with intention of rooting only to get rid of bloatware, but not one of the ODIN Flash recoveries work at all, not one, so like you ended up using CF Auto and that worked but now im still stuck with Stock Recovery. I dont understand why none of the recoveries flash when they did before.
Cheers
trouble with cwm/ twrp
Hi all. Yes I'm a noob and I wouldn't ask If hadn't tried a plethora of ways to install either cwm or twrp.
It took me a good hour to find this thread so hope I'm in the right place.
Ok I used odin to root and cwm didn't stick so still on stock rec. However I used framaroot to get super su working and titanium says I'm all rooted up. Other apps only for root also work.
I've since tried using goo manager and Rom manager to install cwm or twrp and both say unsupported.
I've searched these here threads and found a few with same problem namely when using odin cwm wont stick and android reinstalls stock recovery.
So I'm a bit stuck, I'm rooted but have no cwm or twrp.
Any help would he much appreciated.
Try Philz recovery .
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
thanks !
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
Click to expand...
Click to collapse
Thats exactly how I understood the cwm not sticking problem. I have tried rom manager and said not compatable with my device as did goo manager for twrp. I think odin is the only way I get it to stick. So il flash in odin and il try to get into cwm as it boots and wipe those two files you mentioned.
But then can I just boot up as normal ? or will android try to reflash its stock rom ? Damn my phone for being so difficult
I only ask because I haven't decided what CR to use yet (or even looked for any). I was gonna get it all ready first then learn how to install a CR - 1 thing at a time i thought.
Anyway thanks for your help :good:
JJEgan I found Philz thread to be helpful but something I feel Im just not ready for. Im new to this and although the updated cwm looked cool there were just to much going on, maybe for a later day.
Thanks all the same :good:
wiping data plus cache plus dalvick cache is done to prepare your phone for the custom rom that you are going to flash. the wiping is to clean those partitions because if they are not erased you will have problems. especially if you go from one android version to another or touchwiz to aosp. it is done so you get a clean install with minimal issues. if it is not done you will most likely bootloop. effectively it is a factory reset. all of your apps and app data will be gone so you do not want to do that unless you have backed up your apps . however sometimes google automatically installs them after you sign in.
I am not sure why clockwork mod does not stick but if you copy the rom you want to your phone install clockworkmod with odin and then use clockwork mod to flas the rom and gapps package then factory reset you will not have the stock recovery anymore. but this has to be done without booting into android stock . PLEASE FOLLOW THE FLASHING INSTRUCTIONS TO THE BEST OF YOUR ABILITY. AND UNDERSTAND ANYTIME YOU FLASH OR MODIFY YOUR PHONE YOU VOID YOUR WARRANTY AND POSSIBLY CAN CAUSE IRREPARABLE DAMAGE. BEST OF LUCK!
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
Also philz recovery is highly recommended
HERE IS SOME VERY GOOD READING http://forum.xda-developers.com/showthread.php?t=2362743&highlight=philz+recovery http://forum.xda-developers.com/showthread.php?t=2344125
think I got it lol
Ok that's sounds good. However I've just read the threads you linked and now I've got to back up my imei and NV files first or il loose them when flashing. The procedure is all there and seems doable for a noob but i read some peeps are having trouble just doing that. I really wanted to root/install a CR regardless of the troubles cos I want full access and more importantly want to learn all the ins and outs so I can get the best use from my phone so glad I found this forum cause I'm sure I would have bricked my phone otherwise.
Might I ask if I've got this right tho?
1: backup imei/NV files
2: use odin to get cwm to stick using your method
3: boot into cwm to wipe data/dalvick cache and gapps
4:use cwm to flash a CR
5:factory reset
I think that's right?
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
i had the same Problem before.
I Just disassembled the battery after a full-wipe for few minutes and it works... i don't know y, but that was the only way... ?!
brilliant thanks!
ashraf sharif said:
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
Am I backing up to ext SD card?
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
Are these seperate zips?
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
Click to expand...
Click to collapse
Thank-you for all that,I really appreciate it.
Can I ask the difference between the apps nandroid manager and titanium? I've backed up with both and wondered if i really needed to? The nandroid backup was nearly 3gb!
Also I was gona backup with qpst for imei and NV files but then read its only for US versions? Will the backup of efs folder include those?
honestly i really dont know what the differences are. l do not use custom recoveries or custom roms. i dont use titanium backup .Any rom I flash i get from sammobile.com. one reason i do not use custom roms is that none can support mhl. I use a monitor and bluetooth mouse and keyboard . without mhl I cant mirror my screen so i always stay with stock roms. i use Xposed framework for modifications.
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone......
Click to expand...
Click to collapse
thx you so much. this was the secound s3 that had this issue. deactivating auto reboot did the job!!!!
Hallo together,
I seem to have done something wrong while trying to flash the rom "RazRi_JB_X-2014-Jul-16".
Here is what i did:
- Unlocked to bootloader using official Motorola homepage
- Flashed CWM (non-touch) recovery using "Recovery Flasher by LeBobo v1.7", USB-Debugging was on
- Rebooted into bootloader and flashed "RAZRiRoot2" to prevent Stock-ROM from overwriting the recovery
- Tried to install the Custom ROM using CWM, but it fails to wipe cache (stuck on line "Formatting /cache")
Because it didn't work, i tried to reset everything as it was before to be able to try again - flashed stock-recovery using the Recovery Flasher by LeBobo, booted into bootloader and selected "Factory". The cell is now just showing the "Warning bootloader unlocked" warning and nothing else happens.
When i try to select the recovery in the bootloader menu, an image of a Android laying on its back with an opened hatch and a red warning symbol showing a "!" appears and nothing else happens.
I seem to have bricked my device, because i cant't really do anything now - is there any solution?
I read through different topics but could not find a real solution to this particular problem...
Thank you so much in advance for your help!
It's not bricked
At the moment u enter stock recovery with that android and red warning sy,bol, u need to press bot volume up + downp. Than it will enter stock recovery mode.
Those are the following things u can do to get custom rom,
1. Flash another recovery, cwm touch, cwm non-touch, twrp. They all work a little different.
2. Flash the custom rom and wipe everything, The wip can take some time. sometimes it will be seconds, sometimes it will take a couple of minutes. Every recovery behaves different, and every flash/wipe too.
3. enjoy
If u really want to go back to stock, flash your stock JB firmware by RSD-Lite.
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
StarGeneral said:
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
Click to expand...
Click to collapse
5 minutes is a bit too much. But that's the problem with this device. Every device behaves different and we haven't found out a solution too it.
At the moment i can't do much for you. I can only say try to wipe the partitions mannualy. Wipe system, data and cache. and mount system. And then try to install it. Maybe if that doesnt do the trick try again another recovery.
This from KTR-ROM
Code:
- Enter in TWRP or CWM
- Wipes required: data, system, cache y dalvik
*In CWM mount system must format before (Mount and storage -> Mount system)
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
StarGeneral said:
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
Click to expand...
Click to collapse
nice, glad that it worked