Hi, I plugged in my galaxy S to try and flash the firmware and in Odin instead of Com7 it says Com4 - what should I do to fix this? Thanks.
jaju123 said:
Hi, I plugged in my galaxy S to try and flash the firmware and in Odin instead of Com7 it says Com4 - what should I do to fix this? Thanks.
Click to expand...
Click to collapse
Kind of interested what made you think it has to be com7?
It can be any - mine is 11.
they saw the tutorial on youtube.
there can be any com port, theres no requirement for the com to be number 7 .
Ah I watched a youtube video. Anyway im using the JM2 firmware from samsung-firmwares.com and when I flash it doesnt even start, just says fail. Ive checked im using everything in the right place but it says this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Great, now it has got to here:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
It has frozen there and there is no progress bar or anything. Everything is greyed out - what should I do? Im scared
Check your USB Drivers. See if you can see the device in the Device Manager.
If its frozen now just unplug and turn your phone on and off.
Ok so now it shows an icon of a phone connecting to a PC with a danger sign in the middle, no matter if I turn it off or not. Is it bricked or what can I do?
Also it doesnt show up when I plug it back in...#
And now it has frozen again when I try to update the firmware -.-
jaju123 said:
Great, now it has got to here:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
It has frozen there and there is no progress bar or anything. Everything is greyed out - what should I do? Im scared
Click to expand...
Click to collapse
Did you flash with the correct PIT file?
Yeah the 512.pit. Now whenever I try to flash it doesn't get beyond file analysis...
Also, what is a 512 pass?
jaju123 said:
Yeah the 512.pit. Now whenever I try to flash it doesn't get beyond file analysis...
Also, what is a 512 pass?
Click to expand...
Click to collapse
No idea what a 512 pass is.
How long are you waiting for the flash to complete? On some firmwares it can take a long time (5 minutes or so). What settings have you changed in odin?
Your device may also have a hardware fault.
Well it was working fine before I tried to flash it. I would wait for the flash to complete but it does nothing but sit there at this point:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
It does not get further than this. There is no blue bar indicating flash progress or anything, it only stays here.
take off your battery and re-enter the download model,that is my way to get it fixed.
Thanks for your help, I have, but like I said it gets stuck on file analysis...
Thanks guys! I fixed it by running Odin in compatability for XP SP3 and also as an admin. Flash in progress, should work soon
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
........................
what the hell is this?!?! HELP! =O
I think you resolved this in another thread.
Please don't cross thread as it confuses people.
I know that, thanks ancient. I'm posting updates on all threads i've asked for help... just 2 though
I was able to return to download mode and flash correctly using odin.
The trick to return to download mode was plugging in the battery WITH volup+power already pressed.....
Thanks to everyone!
Phk
jaju123 said:
Thanks guys! I fixed it by running Odin in compatability for XP SP3 and also as an admin. Flash in progress, should work soon
Click to expand...
Click to collapse
Can you explain exactly the whole process you did?
I still can't get the flashing process to work. I'm able to enter download mode but when it comes to flashing, it says:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Hey everyone! im not going to fake anything here. just got this phone 3 days ago and finally feeling up to flashing my phone via odin however im completly and utterly stuck. Ive read up to put it in download mode (volup + voldown + power) and im on a screen that has "android system recovery <2e>" with some options and then at the bottom "manual mode"
i already had odin open and then connected the usb cable.. odin seems to recoginize it...
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
but this is all that happens after i click start.. ive read multiple threads and how-to's and its almost like magic that suddenly it just "works" out of the blue for people. am i missing something important here? any help would be great for this newbie from a tilt2
You are in the wrong mode. Vol up + vol down + power is the wrong combo. Try vol down + home + power!
Sent from my GT-I9000 using XDA App
Same post from Odin-1 click thread:
Ok so I tried to install using odin 1.7 with the june factory from sam's firmware from here...
http://www.multiupload.com/MGEJ5CZLWC
after one-click failing on numerous occasions.
1.7 appeared to almost work but I now get a kernel failure upload mode message as it reboots after the ATT logo.
I even tried 1.3 and pretty much the same thing happens. When I use just odin-1 click i don't get the kernel failure but i get a battery image with the circle loader that stops at the 12 o'clock position.
1.7 1og
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
If I use 1-click again I always go back to ATT logo then battery indicator that stops at 12 position. So its either this or kernel error with the 1.7.
I am confused as to what my next step should be. I am also using the home-made jig on a consistent basis.
Well I seemed to have fixed the issue for now by installing I897UCJH3 package with odin 1.7...The Rom is working shotty but at least it still got me back in...who would have thought. I still need to go back to a prior ROM setting to upgrade to developer ROMs but its nice that I was able to resolve this issue for now.
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
sammusashi said:
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Don't waste your time with this, come see us over at Phoenix.
http://forum.xda-developers.com/showthread.php?t=892973
Click the link in my signature to see more.
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Great.
A littlr more information would help us help you.
Which version of Odin, what is failing, what if any messages are Odin or the device giving you?
kvadde said:
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Click to expand...
Click to collapse
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
The only reason why you would get issues flashing a stock firmware with odin is if the firmware isn't intended for your device.
Odin is quite smart and can prevent you from bricking your device.
I try to flash this one T810XXU1BOH7_T810XAR1BOH7_HOME.tar, Now i have flash custom rom so my tab si working but cant flash to stock rom.
Sorry my bad english :/
lakingslayer said:
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you its work
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
One more with problems when having CM. Try flashing TW ROM and then run Odin with stock firmware. BTW why ur odin is not checking MD5? What file did you download?
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
hidden.img
recovery.img
sboot.bin
system.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select repartition when flashing stock rom.
Hi Gents,
Good day!
I'm trying to bypass the 6.1 "verify your account" thing for my sisters Note5-N9208. Already working on this for several hours and all fails.
tried approach:
OTG (file xplorer isn't showing up)
realterm software( in which emergency dialer should show up, didn't work on my phone)
confusing phone thru wifi ( upon connecting to wifi to go next/ dced the wifi and tried to share the info)
Flash the other latest stock firmware (obviously, didn't even wipe the phone's data and not working)
I read some good info that I should reverted the phone OS back to lower android version like (5.1.1) and bypassing it via OTG should work.
When I tried to flash the oldest version from samobile it didn't work.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!
Note: This is my sisters stupid mistake, playing with her google account and completely mess up with her password, I thought that resetting it thru recovery like with old android version will make the phone clears again but unfortunately it doesn't.
Asking for your help if someone can shed some light on this concern.
Thanks,
Grimm.