Hi Gents,
Good day!
I'm trying to bypass the 6.1 "verify your account" thing for my sisters Note5-N9208. Already working on this for several hours and all fails.
tried approach:
OTG (file xplorer isn't showing up)
realterm software( in which emergency dialer should show up, didn't work on my phone)
confusing phone thru wifi ( upon connecting to wifi to go next/ dced the wifi and tried to share the info)
Flash the other latest stock firmware (obviously, didn't even wipe the phone's data and not working)
I read some good info that I should reverted the phone OS back to lower android version like (5.1.1) and bypassing it via OTG should work.
When I tried to flash the oldest version from samobile it didn't work.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!
Note: This is my sisters stupid mistake, playing with her google account and completely mess up with her password, I thought that resetting it thru recovery like with old android version will make the phone clears again but unfortunately it doesn't.
Asking for your help if someone can shed some light on this concern.
Thanks,
Grimm.
Related
Hello Friends!
I have bricked my s5830i ace, while I wanted to return to stock with odin. Unfortunately I didn't check USB debugging, so I couldn't flash it.
The problem is the following:
-Usb debugging isn't checked=>Can't flash=>Can't unbrick
Please help me! If i connect the phone to the first USB, odin says: Operation(Write) failed...or something...I can't try now.
Or when I connect to the second USB, odin says: Connecting(or something like that) and stucks...
Please help me! I'm very nervous, and I don't want to bring it to service!
You're my last hope
(If you need details, I could have a look at flashing process, and messages)
Well, how did you brick it? Seems like you flashed the wrong firmware (a firmware for 5830 without the 'i')
If that's the case and odin is stuck at setting up connection, then bad luck. A jtag (if you know someone with one) or service center are your options.
I'm sad to hear that. I wanted to flash the official 2.3.6 from samfirmware. If I know well, I should use Odin 1.84, or 1.85 and the file, which I have downloaded should be under PDA section...
Does your ace still go into download mode?
If so, it might be fixed by flashing the correct firmware.
Make sure to have your firmware in your pc root (C:/) since i've read that it helps.
I've put the correct firmware (Samfirmware S5830i Hungary Telenor)...It boot into download mode without any problem. I haven't tried to put the md5 file to the root, but I will try it soon. Thanks. I hope It's a good idea.
But I think I should check USB debugging in settings, but I can't do this, because It's bricked
coda00 said:
But I think I should check USB debugging in settings, but I can't do this, because It's bricked
Click to expand...
Click to collapse
As far as I'm concerned, usb debugging doesn't matter when flashing via odin. Edit: confirmed, since in download mode the system isn't loaded, there's nothing to debug.
Most odin problems occur when using wrong firmware, wrong .ops file or filename, when drivers aren't installed, or when not running odin as admin.
Okay....nothing worked.
I've tried everything, which you've said.
Odin write me every time:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's all...I tried everything...maybe my last chance is the service
OK.....news...
I've tried to remove the Rafael.Baugis kernel, and I got new message from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> boot.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> system.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WOW...
Problem solved
I've found a multi package here:
http://forum.xda-developers.com/showthread.php?t=1822109
It helped me...my phone is unbricked again
And of course I've flashed the stock rom too.
Hello everyone reading this
before you reading this im a lilltle bit noob so yeah
yesterday i rooted my s5mini g800f and installed cm 12.1 on it everything went fine
this day either i wanted to go back to the stock rom so i downloaded stock android 4.4.2 for s5mini g800f
i went to odin flashed it but when i try to flash it this happens
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FVFG1ANL2_G800FXXU1AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
so it failed but when i started up my phone it said
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
so it did that but keys said to me that my phoe wasn't a supported device i think that kies said that because i installed a custom rom and rooted my device
but now i can't use my device i hope simebody can help me i dont know what to do
i can't get into recovery mode and the file size of the stock rom is 2.2 gb
i hope you guys can help me! much apprecheated
sorry for bad languege im not english
Thanks
Did you try to reflash with Odin ? Or flash a custom recovery and wipe all data ?
ok so we both have note 4s and i rooted both of our phones many months ago. i put poprocks v.13 on both phones and everything worked out fine. well over time that rom became outdated so i decided to update the phones. i updated mine to N910TUVU2EPE3_N910TTMB2EPE3_N910TUVU2EPE3_HOME.tar modem and the overdrive rom. had a few hick ups but over all went fine and my phone works great. so i decided to upgrade hers tonight. i put her phone into download mode and started odin. loaded the N910TUVU2EPE3_N910TTMB2EPE3_N910TUVU2EPE3_HOME.tar.md5 and hit start. well it failed and now the phone wont do anything. no matter what i do in odin it fails. ive tried cf-auto root it fails to. phone under download mode says blocked by r/l. odin usally stays stuck on setup connection. any ideas how to get this thing working again before she kills me?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Delete the .md5 and just leave it as .tar
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
assuming you ment delete the md5 from the name of file. it didnt work.
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
osiris999 said:
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
Click to expand...
Click to collapse
Do you use hangouts (google) or Skype (chat)?
It seems it would be easier to help via one of those mediums.
osiris999 said:
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
Click to expand...
Click to collapse
Dupe
I was finally able to fix this thing using Samsung smart switch emergency recovery.
osiris999 said:
I was finally able to fix this thing using Samsung smart switch emergency recovery.
Click to expand...
Click to collapse
Glad you got it working. Looks like reactivation lock was turned on on hers but not yours. I always keep it off on my devices as I would forget to check.
Sent from my SM-N910T using XDA Free mobile app
So, I flashed something to my phone while messing with it only to get it stuck in "kernal not seandroid enforcing". It gets stuck on the "Galaxy Note 5" screen and refuses to startup. This is the tutorial I followed with the link to the kernal I flashed: http://www.phonearena.com/news/How-...T---N920P-and-install-custom-recovery_id73635
I tried factory reset from recovery which didn't make a difference. Then I tried flashing the stock rom with ODIN and got this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really don't know what else to do, so help is much appreciated. I need to stop messing with my phone when I don't know what I'm doing :/
UPDATE: Was able to flash TWRP and can access it. Now I gotta figure out what I can do from here.
Please help me my Note 5 has no Base band Model N920C. Also null IMEI
Thanks.
Reflash firmware with odin
sinkoo1979 said:
Reflash firmware with odin
Click to expand...
Click to collapse
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
shahidskt said:
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
Click to expand...
Click to collapse
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Solved no imei no base band
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
PRADEEPHONDA said:
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Click to expand...
Click to collapse
shahidskt said:
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
Click to expand...
Click to collapse
As I told ain't it..! Anyways you are welcome & cheers...!