Hello everyone reading this
before you reading this im a lilltle bit noob so yeah
yesterday i rooted my s5mini g800f and installed cm 12.1 on it everything went fine
this day either i wanted to go back to the stock rom so i downloaded stock android 4.4.2 for s5mini g800f
i went to odin flashed it but when i try to flash it this happens
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FVFG1ANL2_G800FXXU1AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
so it failed but when i started up my phone it said
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
so it did that but keys said to me that my phoe wasn't a supported device i think that kies said that because i installed a custom rom and rooted my device
but now i can't use my device i hope simebody can help me i dont know what to do
i can't get into recovery mode and the file size of the stock rom is 2.2 gb
i hope you guys can help me! much apprecheated
sorry for bad languege im not english
Thanks
Did you try to reflash with Odin ? Or flash a custom recovery and wipe all data ?
Related
this is what i got when im trying to flash stoch firmware on my SM 920C by odin3
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
:crying:
it looks like you are trying to downgrade your firmware? you can't downgrade to older firmware so try again with the latest firmware version.
bissa said:
it looks like you are trying to downgrade your firmware? you can't downgrade to older firmware so try again with the latest firmware version.
Click to expand...
Click to collapse
thk u very much bro just i dont know why im getting bootloop when im installing TWRP
enideruon said:
thk u very much bro just i dont know why im getting bootloop when im installing TWRP
Click to expand...
Click to collapse
You need to flash a kernel, TWRP on the stock kernel will cause bootloop. I suggest Arter97 kernel.
i have s6 i bought and found tmobile dont run in my area and want to flash im trying to unlock the phone and ever time get nand fail. i am going by the samunlocks guide. and using there md5 file anything im missing.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920T1UVU1AOCH_G920T1TMB1AOCH_G920T1UVU1AOCH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Use latest Odin 3.10.7 and firmware OJ9 and it should be fine.
where do i get the firmware same problem tried unlockbase but not getting no help
What carrier you trying to use?
I want use straight talk att sim but would to unlock it
Sent from my SAMSUNG-SM-G900A using Tapatalk
Flashing firmware not going to help. What your current firmware?
The way to unlock is to contact the user stifilz
So, I flashed something to my phone while messing with it only to get it stuck in "kernal not seandroid enforcing". It gets stuck on the "Galaxy Note 5" screen and refuses to startup. This is the tutorial I followed with the link to the kernal I flashed: http://www.phonearena.com/news/How-...T---N920P-and-install-custom-recovery_id73635
I tried factory reset from recovery which didn't make a difference. Then I tried flashing the stock rom with ODIN and got this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really don't know what else to do, so help is much appreciated. I need to stop messing with my phone when I don't know what I'm doing :/
UPDATE: Was able to flash TWRP and can access it. Now I gotta figure out what I can do from here.
Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.
wavy_devon12 said:
Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.
Click to expand...
Click to collapse
You can't flash back to KITKAT, what was your solution?
Please help me my Note 5 has no Base band Model N920C. Also null IMEI
Thanks.
Reflash firmware with odin
sinkoo1979 said:
Reflash firmware with odin
Click to expand...
Click to collapse
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
shahidskt said:
Its already on Nougat 7 and even not possible to downgrade. I re flashed many firmware but result is the same.
Click to expand...
Click to collapse
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Solved no imei no base band
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
PRADEEPHONDA said:
Dude you must download the latest firmware of your device from Sammobile & flash it through Odin.
All your problems will be solved... This is the only solution.
Flashing old stock files over recently updated firmware is the issue here. So follow my directions you will be able to fix it.
Click to expand...
Click to collapse
shahidskt said:
Dear PRADEEPHONDA,
Yes, I downloaded the latest Nougat 7 from SAM-MOBILE and flashed. Amazingly my phone came back.
Earlier I was trying to flash with older Nougat 7 and faced No IMEI and Base band.
I missed this that new security patches blocked the access of older rams.
Thanks.
Log of ODIN:-
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
Click to expand...
Click to collapse
As I told ain't it..! Anyways you are welcome & cheers...!