[Q][Solved] Brick, can't flash - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hello Friends!
I have bricked my s5830i ace, while I wanted to return to stock with odin. Unfortunately I didn't check USB debugging, so I couldn't flash it.
The problem is the following:
-Usb debugging isn't checked=>Can't flash=>Can't unbrick
Please help me! If i connect the phone to the first USB, odin says: Operation(Write) failed...or something...I can't try now.
Or when I connect to the second USB, odin says: Connecting(or something like that) and stucks...
Please help me! I'm very nervous, and I don't want to bring it to service!
You're my last hope
(If you need details, I could have a look at flashing process, and messages)

Well, how did you brick it? Seems like you flashed the wrong firmware (a firmware for 5830 without the 'i')
If that's the case and odin is stuck at setting up connection, then bad luck. A jtag (if you know someone with one) or service center are your options.

I'm sad to hear that. I wanted to flash the official 2.3.6 from samfirmware. If I know well, I should use Odin 1.84, or 1.85 and the file, which I have downloaded should be under PDA section...

Does your ace still go into download mode?
If so, it might be fixed by flashing the correct firmware.
Make sure to have your firmware in your pc root (C:/) since i've read that it helps.

I've put the correct firmware (Samfirmware S5830i Hungary Telenor)...It boot into download mode without any problem. I haven't tried to put the md5 file to the root, but I will try it soon. Thanks. I hope It's a good idea.

But I think I should check USB debugging in settings, but I can't do this, because It's bricked

coda00 said:
But I think I should check USB debugging in settings, but I can't do this, because It's bricked
Click to expand...
Click to collapse
As far as I'm concerned, usb debugging doesn't matter when flashing via odin. Edit: confirmed, since in download mode the system isn't loaded, there's nothing to debug.
Most odin problems occur when using wrong firmware, wrong .ops file or filename, when drivers aren't installed, or when not running odin as admin.

Okay....nothing worked.
I've tried everything, which you've said.
Odin write me every time:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's all...I tried everything...maybe my last chance is the service

OK.....news...
I've tried to remove the Rafael.Baugis kernel, and I got new message from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iBTULC1_S5830iXXLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> boot.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> system.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WOW...

Problem solved
I've found a multi package here:
http://forum.xda-developers.com/showthread.php?t=1822109
It helped me...my phone is unbricked again
And of course I've flashed the stock rom too.

Related

Help!

I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_VSLG1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLF2.tar.md5 is valid.
<OSM> CSC_S5830M_TFGLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> param.lfs
<ID:0/004> system.img
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> csc.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I do all the procedure but I still have the same problem
Help Please!
JeduRocks said:
I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
I do all the procedure but I still have the same problem
Help Please!
Click to expand...
Click to collapse
what u mean? -.-

[Q] Galaxy note Help.. I think it's Bricked!!

I have a Note N7000, It is rooted with Philz Touch 5. I had issues with it last friday where it would restart when trying to start any random app.
Thought it weird, maybe it's the last app to be put on - but no. Went into the phone and cleared the cache in Philz Touch 5. After this the phone would not start again.. much to my disappointment.
I have downloaded Odin3 v1.87 and have downloaded the attachment from this thread. http://forum.xda-developers.com/showthread.php?t=1354888
i have also purchased a JIG from this Ebay ad. http://www.ebay.co.uk/itm/141209048811?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The JIG doesn't work, ODIN can read my phone when it's plugged in - and has successfully done the PDA & BOOTLOADER tasks.
I hope & feel that I can bring my phone back to life - I would someone to help me to understand what next steps I can take to do this.
Thanks for all your help in advance..
Can you boot into recovery?
Azeazezar said:
Can you boot into recovery?
Click to expand...
Click to collapse
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.
marmyte said:
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.
Click to expand...
Click to collapse
What the PDA and bootloader task? How did you do it?
nokiamodeln91 said:
What the PDA and bootloader task? How did you do it?
Click to expand...
Click to collapse
Used C:\Users\Stev\Downloads\removeyellowtriangleNEW\2-ZSLPF.tar for BOOTLOADER
And C:\Users\Stev\Downloads\removeyellowtriangleNEW\1.tar for the PDA
All went well -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Used Odin3 v1.87
EDIT
I just noticed those files are from triangleaway. NOT the stock rom. What you flashed is to remove the big yellow triangle at boot.
Download Stock GB or Jellybean, and flash those with odin. That should fix your phone.
Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.
marmyte said:
Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.
Click to expand...
Click to collapse
Why did you even flash those files? Go to www.sammobile.com and download a firmware. Then flash it using Odin. Just use the PDA tab to flash the rom.
It failed, can i try to flash with an older rom?
You can flash any rom from that site. i recommend avoiding the ICS roms though.
marmyte said:
It failed, can i try to flash with an older rom?
Click to expand...
Click to collapse
How where why?
Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
marmyte said:
Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
There is some connection problem with phone and PC.. so kill all kies processes.. run odin as admin.. reboot into download mode and try again.
killed all kies processes.. run odin as admin.
Got this..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help please:crying:
marmyte said:
killed all kies processes.. run odin as admin.
Help please:crying:
Click to expand...
Click to collapse
Flash a tar version of Philz kernel like XXLTA or DDLSC. using odin. The power off the device and boot into recovery. This should get you into CWM. Format system, data, cache and preload. Then reboot into download mode and flash this rom again OR you can flash any custom TW or CM rom.
I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me
marmyte said:
I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me
Click to expand...
Click to collapse
go to this link and in post 3.. there is download for TW kernels. download the latest tar version.
boot the phone to download mode and select the tar kernel in PDA and flash it. Odin will say KERNEL.. If it completes. power off the device and try to boot into recovery.
Odin successful - but can't boot into recovery..
marmyte said:
Odin successful - but can't boot into recovery..
Click to expand...
Click to collapse
Why not? Power off the device. In fact remove the battery for a couple of seconds.. Then put it back. Press volume up home and power together till you see the N7000 logo and let go..
Tried it.. Nothing happens - but i can touch the screen and it'll vibrate?

[q] help im stuck

Hello everyone reading this
before you reading this im a lilltle bit noob so yeah
yesterday i rooted my s5mini g800f and installed cm 12.1 on it everything went fine
this day either i wanted to go back to the stock rom so i downloaded stock android 4.4.2 for s5mini g800f
i went to odin flashed it but when i try to flash it this happens
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANL1_G800FVFG1ANL2_G800FXXU1AOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
so it failed but when i started up my phone it said
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
so it did that but keys said to me that my phoe wasn't a supported device i think that kies said that because i installed a custom rom and rooted my device
but now i can't use my device i hope simebody can help me i dont know what to do
i can't get into recovery mode and the file size of the stock rom is 2.2 gb
i hope you guys can help me! much apprecheated
sorry for bad languege im not english
Thanks
Did you try to reflash with Odin ? Or flash a custom recovery and wipe all data ?

Hello guys!

I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk

Can't flash to Stock

Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.
wavy_devon12 said:
Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.
Click to expand...
Click to collapse
You can't flash back to KITKAT, what was your solution?

Categories

Resources