I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_VSLG1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLF2.tar.md5 is valid.
<OSM> CSC_S5830M_TFGLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> param.lfs
<ID:0/004> system.img
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> csc.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I do all the procedure but I still have the same problem
Help Please!
JeduRocks said:
I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
I do all the procedure but I still have the same problem
Help Please!
Click to expand...
Click to collapse
what u mean? -.-
Related
I flash it via odin but i stuck in a boot loop
Here mi Odnin messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> Sbl.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Some help please.
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
nokiamodeln91 said:
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
Click to expand...
Click to collapse
Thanks my process is a little diferent, i install all the rom deodexed etc from eybee1970, and now works, thanks in advance.
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
HOSNY_MH said:
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
Click to expand...
Click to collapse
what exactly do you want brother please mention something then i will see if i could help you
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HOSNY_MH said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ummm...
Hi HOSNY_MH... where are you from? or where is the request rom from?
AFAIK I9100G = Galaxy S II
What do you need? why do yo want a galaxy ace rom and then post a galaxy s2 failed flash process? Did you mean that you need a Galaxy S2 rom?
i'm from egypt
how to flash rom
how to root
You can see "How to root-unroot galaxy ace" thread in general of galaxy ace...
Sent from my GT-S5830 using xda premium
HOSNY_MH said:
i'm from egypt
how to flash rom
how to root
Click to expand...
Click to collapse
Here it's a great Q&A Thead you could find
1. How to root and how to install CWM
2. How to flash any rom using Odin
3. Usefull tricks and answers
forum.xda-developers.com/showthread.php?p=42309905
Here hubix guide (how to flash a rom via Odin) where you can get drivers, the correct Odin version for Ace 4.38
forum.xda-developers.com/showthread.php?t=1034145?
And here the official website where you can get official firmwares for your Ace (choose your country if you want, but it's not neccessary )
www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
PD: After flashing a fresh stock using Odin, reboot into recovery and do wipe data/factory reset and wipe cache partition in order to skip the bootloop (just in case )
Boot into recovery mode: HOLD HOME + POWER BUTTON UNTIL YOUR MOBILE BOOTS INTO RECOVERY
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i have a odin recovery for recovery and boot just message me on aim: assassinanex or facebook: lane.wiscombe or yahoo: [email protected]] or [email][email protected]
Snowwulfe said:
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you are an idiot.. you brivjed your phone flashing a recovery that is not for this phone.. why don't people read before leaping.
Sent from my SGS 4
@Snowwulfe Tried factory reset in recovery?
Sent through time and space from my s3mini/CM10.2
successful unbrick
I just unbricked my sm-g730a. you need a 2nd phone that is working, some downloads, and short 2 pins on motherboard.
Worked if your still interested...
Hi,
I'm was trying to Restore Rogers Galaxy Note 5 SM-N920W8 to Stock 5.1.1 Lollipop Firmware
here are my problem details:
Root my Samsung Note 5 - N920W8 which failed and got stuck with logo and in the left corner with a red message: "SW REV. CHECK FAIL DEVICE: 2, BINARY: 1"
- Recovery option which should come when I hold 3 buttons Vol up+power+hold button) NOT WORKING
- Download mode works. and when I trying to reinstall new firmware coming up following message in Odin:
Odin3 Ver. v3.10.7.1
Carrier: Rogers
Model: SM-N920W8
SW Ver: N920W8VLU1AOGD
Downloaded Rom: N920W8VLU1AOGD_N920W8UWA1AOH1_PCT.zip
RESULT:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin Ver. 3.09
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920W8VLU1AOGD_N920W8UWA1AOH1_N920W8VLU1AOH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
Did you try later Rogers firmwares?
Note 5 ?
Idan73 said:
Did you try later Rogers firmwares?
Note 5
Click to expand...
Click to collapse
I'm having the same problem as OP, can you please link me to where I might find the latest Rogers firmwares?
My Google-fu isn't working out as well as I had hoped.
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk