I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
HOSNY_MH said:
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
Click to expand...
Click to collapse
what exactly do you want brother please mention something then i will see if i could help you
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HOSNY_MH said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ummm...
Hi HOSNY_MH... where are you from? or where is the request rom from?
AFAIK I9100G = Galaxy S II
What do you need? why do yo want a galaxy ace rom and then post a galaxy s2 failed flash process? Did you mean that you need a Galaxy S2 rom?
i'm from egypt
how to flash rom
how to root
You can see "How to root-unroot galaxy ace" thread in general of galaxy ace...
Sent from my GT-S5830 using xda premium
HOSNY_MH said:
i'm from egypt
how to flash rom
how to root
Click to expand...
Click to collapse
Here it's a great Q&A Thead you could find
1. How to root and how to install CWM
2. How to flash any rom using Odin
3. Usefull tricks and answers
forum.xda-developers.com/showthread.php?p=42309905
Here hubix guide (how to flash a rom via Odin) where you can get drivers, the correct Odin version for Ace 4.38
forum.xda-developers.com/showthread.php?t=1034145?
And here the official website where you can get official firmwares for your Ace (choose your country if you want, but it's not neccessary )
www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
PD: After flashing a fresh stock using Odin, reboot into recovery and do wipe data/factory reset and wipe cache partition in order to skip the bootloop (just in case )
Boot into recovery mode: HOLD HOME + POWER BUTTON UNTIL YOUR MOBILE BOOTS INTO RECOVERY
Related
I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_VSLG1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLF2.tar.md5 is valid.
<OSM> CSC_S5830M_TFGLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> param.lfs
<ID:0/004> system.img
<ID:0/004> sbl.bin
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> csc.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I do all the procedure but I still have the same problem
Help Please!
JeduRocks said:
I do not own the samsung galaxy ace but this problem will comment
It was a day when the galaxy ace any s5830m be reset and did not turn over, enter recovery and download mode but remains in samsung and is booted several times, resetting the firmware I get this with odin
I do all the procedure but I still have the same problem
Help Please!
Click to expand...
Click to collapse
what u mean? -.-
I flash it via odin but i stuck in a boot loop
Here mi Odnin messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> Sbl.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Some help please.
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
nokiamodeln91 said:
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
Click to expand...
Click to collapse
Thanks my process is a little diferent, i install all the rom deodexed etc from eybee1970, and now works, thanks in advance.
I have been running PACMAN rom (with NX kernel), but due to it crashing repeatedly, I've tried to restore it to my stock ROM (Jellybean).
So I backed up everything on Titanium Backup,
downloaded the correct (most up to date ROM for me) N7000XXLSZ_N7000OXXLS4_VOD
and then flashed it using Odin,
It whizzes away, comes up with an "all clear"
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
then my phone restarts and is just hanging on the the Samsung boot screen.
I can't access recovery mode, but I can access download mode.
Having researched the other threads, it appears I am not alone, but I am unsure how to progress to get stock rom.
Can anyone please advise me what the next steps should be please?
I tell a lie, I can get into recovery mode, but it still loops
emyllis said:
I tell a lie, I can get into recovery mode, but it still loops
Click to expand...
Click to collapse
Did you perform wipes after or before flashing?
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
Did you perform wipes after or before flashing?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No - I assumed using ODIN would wipe it clean as it were...
Would the correct course of action be to go into CWM, wipe everything then try ODIN again?
In my head the issue is with the kernel (NX), but I think that;'s just paranoia!
anyway, I've got into CWM and am about to go and wipe everything to try again... My worry is that the kernel is wrong though and it'll generate an error message further on down the line? any thoughts please?
If you have flash a rom, then there will not be any cwm.it will be stock recovery. You can flash Philz kernel using recovery and then use cwm recovery to wipe data. The phone should boot up then.
Sent from my GT-I9500 using xda premium
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i have a odin recovery for recovery and boot just message me on aim: assassinanex or facebook: lane.wiscombe or yahoo: [email protected]] or [email][email protected]
Snowwulfe said:
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you are an idiot.. you brivjed your phone flashing a recovery that is not for this phone.. why don't people read before leaping.
Sent from my SGS 4
@Snowwulfe Tried factory reset in recovery?
Sent through time and space from my s3mini/CM10.2
successful unbrick
I just unbricked my sm-g730a. you need a 2nd phone that is working, some downloads, and short 2 pins on motherboard.
Worked if your still interested...
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk