I have been running PACMAN rom (with NX kernel), but due to it crashing repeatedly, I've tried to restore it to my stock ROM (Jellybean).
So I backed up everything on Titanium Backup,
downloaded the correct (most up to date ROM for me) N7000XXLSZ_N7000OXXLS4_VOD
and then flashed it using Odin,
It whizzes away, comes up with an "all clear"
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLSZ_N7000XXLSO_N7000OXXLS4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
then my phone restarts and is just hanging on the the Samsung boot screen.
I can't access recovery mode, but I can access download mode.
Having researched the other threads, it appears I am not alone, but I am unsure how to progress to get stock rom.
Can anyone please advise me what the next steps should be please?
I tell a lie, I can get into recovery mode, but it still loops
emyllis said:
I tell a lie, I can get into recovery mode, but it still loops
Click to expand...
Click to collapse
Did you perform wipes after or before flashing?
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
Did you perform wipes after or before flashing?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No - I assumed using ODIN would wipe it clean as it were...
Would the correct course of action be to go into CWM, wipe everything then try ODIN again?
In my head the issue is with the kernel (NX), but I think that;'s just paranoia!
anyway, I've got into CWM and am about to go and wipe everything to try again... My worry is that the kernel is wrong though and it'll generate an error message further on down the line? any thoughts please?
If you have flash a rom, then there will not be any cwm.it will be stock recovery. You can flash Philz kernel using recovery and then use cwm recovery to wipe data. The phone should boot up then.
Sent from my GT-I9500 using xda premium
Related
I flash it via odin but i stuck in a boot loop
Here mi Odnin messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> Sbl.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Some help please.
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
nokiamodeln91 said:
whats the boot loop? samsung logo glowing ?
if yes.. install a Philz LM5 kernel using stock recovery and do a factory wipe
Click to expand...
Click to collapse
Thanks my process is a little diferent, i install all the rom deodexed etc from eybee1970, and now works, thanks in advance.
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
HOSNY_MH said:
I've gt-s5830 galaxy ace
i need the software from sam mobile gt-s5830okaegy
but hotfile site doesn't work with me
any upload site instead?
Click to expand...
Click to collapse
what exactly do you want brother please mention something then i will see if i could help you
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HOSNY_MH said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOM E.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> MLO
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ummm...
Hi HOSNY_MH... where are you from? or where is the request rom from?
AFAIK I9100G = Galaxy S II
What do you need? why do yo want a galaxy ace rom and then post a galaxy s2 failed flash process? Did you mean that you need a Galaxy S2 rom?
i'm from egypt
how to flash rom
how to root
You can see "How to root-unroot galaxy ace" thread in general of galaxy ace...
Sent from my GT-S5830 using xda premium
HOSNY_MH said:
i'm from egypt
how to flash rom
how to root
Click to expand...
Click to collapse
Here it's a great Q&A Thead you could find
1. How to root and how to install CWM
2. How to flash any rom using Odin
3. Usefull tricks and answers
forum.xda-developers.com/showthread.php?p=42309905
Here hubix guide (how to flash a rom via Odin) where you can get drivers, the correct Odin version for Ace 4.38
forum.xda-developers.com/showthread.php?t=1034145?
And here the official website where you can get official firmwares for your Ace (choose your country if you want, but it's not neccessary )
www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
PD: After flashing a fresh stock using Odin, reboot into recovery and do wipe data/factory reset and wipe cache partition in order to skip the bootloop (just in case )
Boot into recovery mode: HOLD HOME + POWER BUTTON UNTIL YOUR MOBILE BOOTS INTO RECOVERY
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
knorki said:
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
Click to expand...
Click to collapse
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
omarainea said:
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
Click to expand...
Click to collapse
thx full wipe and flash again worked
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius
I have a sprint galaxy note 5. I accidently formatted in twrp. Since then its' stuck here ( NOTE: I WAS ON 5.1.1 AND I'M TRYING TO FLASH 6.0.1 I HAVE THE 6.0 TWRP THAT IS REQUIRED)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
Click to expand...
Click to collapse
Anyone have any ideas at all? I have no way to get a replacement until next week so I'm gonna do what I can to get this working. Any additional info can be provided
what I've tried:
different ROM ( could be using the wrong one)
N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5
N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5
ALL_SPT_N920PVPU2BPC3_N920PSPT2BPC3_CL7231607_QB8832851_REV00_user_low_ship.tar.md5
all of these have the same problem. I am starting with a clean phone pretty much. system 0 bytes data 0 bytes
I have noticed that /system won't mount in TWRP when trying to repair the directory possibly this has something to do with it
Any advice at all is welcome. I have no clue where to go from here
EDIT: Just tried a new usb port and it worked after 7 hours of trying over and over
I would try to get my hands on an updated stock rom bundled with boot image and kernel and try that with odin. Also be sure you are using the right Odin.